Product Specifications NVV NVV--65A 65A--ER3 6-port sector antenna, 2x 694–896 and 4x 1695–2690 MHz, 65° HPBW, 3x AccuRET l Utilizes AccuRET® actuator(s) on the back of the antenna Electrical Specifications Frequency Band, MHz Gain, dBi Beamwidth, Horizontal, degrees Beamwidth, Vertical, degrees Beam Tilt, degrees USLS (First Lobe), dB Front-to-Back Ratio at 180°, dB Isolation, dB Isolation, Intersystem, dB VSWR | Return Loss, dB PIM, 3rd Order, 2 x 20 W, dBc Input Power per Port, maximum, watts Polarization Impedance 694–790 14.2 73 16.8 3–18 16 28 25 30 790–896 14.3 71 15.2 3–18 20 34 25 30 1695–1920 17.4 60 7.1 3–13 17 31 25 30 1920–2180 17.9 63 6.5 3–13 15 32 25 30 2300–2690 18.2 61 5.4 3–13 14 31 25 30 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 -145 350 ±45° 50 ohm -150 350 ±45° 50 ohm -150 300 ±45° 50 ohm -150 300 ±45° 50 ohm -150 250 ±45° 50 ohm Electrical Specifications, BASTA* Frequency Band, MHz Gain by all Beam Tilts, average, dBi Gain by all Beam Tilts Tolerance, dB Gain by Beam Tilt, average, dBi 694–790 13.8 ±0.5 790–896 14.1 ±0.3 3 ° | 13.8 3 ° | 14.2 10 ° | 13.8 10 ° | 14.2 8 ° | 16.8 8 ° | 17.6 8 ° | 18.0 18 ° | 13.6 18 ° | 13.8 13 ° | 16.4 13 ° | 17.2 13 ° | 17.1 ±1.8 ±1.1 16 23 21 8 ±2.1 ±0.8 19 23 21 9 ±7.5 ±0.5 12 23 15 9 ±8 ±0.5 14 23 16 10 ±5.6 ±0.4 12 23 18 7 Beamwidth, Horizontal Tolerance, degrees Beamwidth, Vertical Tolerance, degrees USLS, beampeak to 20° above beampeak, dB Front-to-Back Total Power at 180° ± 30°, dB CPR at Boresight, dB CPR at Sector, dB 1695–1920 16.7 ±1 3 ° | 16.7 1920–2180 17.4 ±0.5 3 ° | 17.3 2300–2690 17.8 ±0.7 3 ° | 17.8 * CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the whitepaper Time to Raise the Bar on BSAs. General Specifications Operating Frequency Band 1695 – 2690 MHz Antenna Type Sector Band Multiband Performance Note Outdoor usage Total Input Power, maximum 600 W @ 50 °C | 694 – 896 MHz Mechanical Specifications RF Connector Quantity, total 6 RF Connector Quantity, low band 2 ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 26, 2017 page 1 of 2 June 15, 2017 Product Specifications NVV NVV--65A 65A--ER3 RF Connector Quantity, high band 4 RF Connector Interface 7-16 DIN Female Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket Radiator Material Aluminum Radome Material Fiberglass, UV resistant Reflector Material Aluminum RF Connector Location Bottom Wind Loading, frontal 446.0 N @ 150 km/h 100.3 lbf @ 150 km/h Wind Loading, lateral 145.0 N @ 150 km/h 32.6 lbf @ 150 km/h Wind Loading, rear 524.0 N @ 150 km/h 117.8 lbf @ 150 km/h Wind Speed, maximum 241 km/h | Low loss circuit board | 150 mph Dimensions Length 1412.0 mm Width 301.0 mm Depth 181.0 mm | 7.1 in Net Weight, without mounting kit 19.4 kg | | | 55.6 in 11.9 in 42.8 lb Packed Dimensions Length 1672.0 mm Width 429.0 mm | 16.9 in Depth 329.0 mm | 13.0 in Shipping Weight 32.7 kg 72.1 lb | | 65.8 in Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364-2006 ISO 9001:2008 Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system Included Products BSAMNT-OFFSET — Forward Offset Pipe Mounting Kit for 4.5 in (114.3 mm) OD round members * Footnotes Performance Note Severe environmental conditions may degrade optimum performance ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 26, 2017 page 2 of 2 June 15, 2017
© Copyright 2024 Paperzz