High Density Copper Solutions
For Network Core and Outside Plant Deployment
In an environment of rapidly changing technologies and challenging business
circumstances, network operators and service providers must reduce spending, increase
network security, guarantee quality of service, assure high service availability and plan for
the future.
High-density copper connectivity solutions, based on the original LSA‑PLUS® contact
technology, deliver maximum space savings in the central office, street cabinets or at the
customer’s premises.
LSA-PLUS® HD180
The LSA‑PLUS® HD180 10-pair connection and disconnection modules increase available
space by up to 100% over conventional connection systems.
Suitable for use in POTS, DSL and IP communication networks, the modules are
VDSL2‑capable and can be used wherever space is restricted, whether indoors
or outdoors.
• VDSL2-capable
• Optimum circuit density with 13.5 mm mounting grid dimensions
www.te.com/adckrone
LSA-PLUS® Series 12 Module
A very high density 10-pair disconnection
module, two Series 12 modules can be
assembled side by side in one profile
adapter which mounts on profile rods with
95 mm spacing.
The modules fit in LSA-PLUS PROFIL
frames and use the standard LSA-PLUS
insertion tool.
• Provides 20-pair disconnection
functionality within dimensions of
17.5 mm (height) x 152 mm (width)
ADSL2+ and VDSL2 High Density
Splitters
ADSL2+ and VDSL2 splitters enable
common use of a copper pair for both
telephony and high bit-rate data services. The splitters install in local exchanges
at hand-over distribution frames or in
cross-connection cabinets with active
equipment.
Termination of the subscriber and
system sides, as well as at the DSLAM,
is accomplished using the standard
LSA-PLUS® insertion tool.
• Optimized for cabinet and collocation
distribution frame applications
• Support VDSL2 up to 30 MHz as well
as ADSL and ADSL2+ service
• Compact 8-port design applicable for
all DSLAM port counts
• Thin layer plastic gives high density
• Short installation time – simply click on
profile rods
• 17-pole edge connectors based on
LSA-PLUS® technology
• 8-port splitter available with all ITU
standard splitter cards
UK Office: Shannon Way, Tewkesbury Business Park, Tewkesbury, Gloucestershire GL20 8GB, United
Kingdom Tel: +44 (0)1684 857 900 Fax: +44 (0)1684 857 988 Email: [email protected]
ADC, TE (logo) and Tyco Electronics are trademarks of the Tyco Electronics group of
companies and its licensors.
South African Office: ADC Telecommunications (Africa) PTY Ltd., 16 Brand Hatch Close, Kyalami Business Park,
Midrand, 1685 Johannesburg, South Africa • Tel: +27 11 466 3333 Fax: +27 11 466 3300
Email: [email protected]
While Tyco Electronics has made every reasonable effort to ensure the accuracy of the
information in this document, Tyco Electronics does not guarantee that it is error-free,
nor does Tyco Electronics make any other representation, warranty or guarantee that
the information is accurate, correct, reliable or current. Tyco Electronics reserves the
right to make any adjustments to the information contained herein at any time without
notice. Tyco Electronics expressly disclaims all implied warranties regarding the
information contained herein, including, but not limited to, any implied warranties of
merchantability or fitness for a particular purpose. The dimensions in this document are
for reference purposes only and are subject to change without notice. Specifications
are subject to change without notice. Consult Tyco Electronics for the latest dimensions and design specifications.
EMEA Office: ADC GmbH, Beeskowdamm, 3-11, 14167 Berlin, Germany • Tel: +49 308 453 1818
Fax: +49 308 453 1703. For a listing of all ADC KRONE’s global sales office locations, please refer to our web site.
Tyco Electronics Corporation. All rights reserved.
201620BE 2/11 Revision © 2011