Single Parameter Sensors
Met One Instruments has the systems,
people, and experience to solve your
toughest problem.
High Quality Analog Measurements
Renewable Energy Application
014A
024A
50.5
034B
Proudly Manufactured in Grants Pass, Oregon
013
023
014A - Superior reliability for long-term
unattended operations. Quality data
collection, meets PSD requirements. Ideal
for a wide range of applications.
0-100mph range.
024A - 0 to 360 degrees of dependable
wind direction measurement. Typically
used in tandem with the 014A anemometer.
Suitable for a wide range of applications.+/- 5
deg accuracy. 1mph starting threshold, meets
PSD guidelines
50.5 - The solid state option, this twodimensional ultrasonic wind sensor is used
to measure wind speed and direction.
This sensor is an alternative to traditional
mechanical cup and vane or propeller and
vane wind sensors. This sonic wind sensor
provides analog and digital outputs and is
compatible with any data logger capable of
accepting signals in voltage or serial format.
300 Series Rain Gauges
013 - Extremely rugged, this
anemometer measures wind speed up
to 150 MPH. The sensor is particularly
useful in remote, unattended locations
where high winds and heavy icing
conditions are common.
023 - The companion sensor for the 013
anemometer. Measures wind direction in
adverse conditions prone to high winds and
heavy icing.
034B - Combination wind speed and
direction. A smart choice. The sensor
is capable of measuring wind speeds in
excess of 160 MPH and is designed for
simple, rapid installation. The 034B provides
accurate, long-term measurements in
hostile environments and meets PSD and
WMO wind speed specifications.
WEB www.osop.com.pa
E-MAIL [email protected]
060 Series
Temp Sensors
360/370/380 - Accurately measures
snow/rainfall at up to 3 inches per hour.
Providing years of trouble free service,
300 Series tipping bucket rain and siphoning
gauges are available with 6, 8, or 12
diameter inlet funnels. These rain gauges
conform to National Weather Service
recommendations and are widely used for
precipitation monitoring applications.
Three Level Tower at Nuclear Power Plant
060A/062/064 - Designed for the most
demanding industrial conditions, the 060
Series temperature probes are precision
devices that accurately measure ambient
air temperature in weather monitoring
applications. These sensors respond
quickly to rapid changes in environmental
conditions and are designed for reliable,
continuous operation.
Met One Instruments satisfies your meteorological
monitoring requirements by providing:
• Sensors
• Integrated measuring systems
• Installation and training
• Annual maintenance contracts
• Factory direct service
• Responsive customer service
• Engineered solutions
• Pricing consistent with high quality
Met One Instruments integrates the following
measurements into unified meteorological monitoring
systems which meet or exceed EPA, PSD, NRC
Safety Guidelines, WMO and equivalent international
standards:
• Wind speed
• Wind direction
• Temperature
• Relative Humidity
• Dew point
• Atmospheric pressure
• Solar radiation
• Precipitation
• Differential temperature
• Sigma
Met One Instruments products are used world wide
for compliance monitoring, plant and landfill site
surveys, air pollution studies, test range support,
weather research, crop protection and environmental
impact studies. If your needs are special, we can
custom design a system for you.
Met One Instruments, Inc.
Meteorological
Sensors,
Systems &
Service
“To strive for continuous improvement in our Quality Management
System to assure a quality product, delivered on time, for total
customer satisfaction.”
ISO 9001:2008 Certificate
NIST Traceable Calibrations, ISO 9001Certification
WEB www.osop.com.pa
E-MAIL [email protected]
WEB www.osop.com.pa
E-MAIL [email protected]
Single Parameter Sensors
Multi Parameter Sensors
High Quality Analog Measurements
Digital Measurements Made Easy
Local Weather Impact
Automated Weather Stations
Local weather has a major impact on
industrial processes, operations, efficiency
and safety. The federal Environmental
Protection Agency (EPA), municipal and
state environmental regulatory organizations,
require that basic meteorological variables be
measured and recorded on site. Previously
collected ambient data from industrial or
waste management sites can be valuable in
cases of complaints or litigation. Collecting
high-quality data regarding ambient
conditions can help to increase overall plant
operating efficiency and productivity, while
minimizing downtime and overhead costs.
Met One Instruments, Inc’s (MOI)
weather stations and sensors are proudly
manufactured in the USA. We excel in
design and technology and we manufacture
to the highest quality control standards.
For 50 years MOI has a proven real world
performance record. The commitment to our
customers and the quality of our products
has made Met One Instruments, Inc a world
leader in meteorological monitoring.
Better Data Helps Productivity
Met One
WIND INSTRUMENTS
076B
“Temperature is weather.
You need the most accurate
measurement available.”
011E
010C
020C
011E Class One – Ideal for wind
energy applications. With excellent
cosine response, this sensor exceeds
the performance criteria established
by the International Electro-technical
Commission, IEC 61400-12-1 for class-1
wind sensors.
010C – High accuracy measurements of
horizontal wind speeds up to 100 MPH.
The lightweight three-cup anemometer
meets EPA and PSD requirements and is
used in virtually all applications where fast
response and low starting threshold are of
paramount importance.
021C – A highly accurate
companion to the 011 class-1
anemometer. Measures wind direction in
wind energy applications. The lightweight
airfoil meets IEC requirements and is
accurate to ±2 degrees. The sensor
is especially useful on meteorological
measurement towers exceeding
60 meters.
020C – Lightweight airfoil vane
coupled directly to a precision
potentiometer. The 020C is the
companion sensor for the 010C
anemometer. Meets PSD requirements
and provides an accuracy of ±3 degrees.
The sensor is especially useful when low
starting threshold, high damping ratio, and
short delay distance are required.
WEB www.osop.com.pa
E-MAIL [email protected]
Pyranometer
076B – This motor aspirated radiation
shield is currently employed in the
most comprehensive temp monitoring
network in the world. 076B shields can
be used with up to four T/RH probes and
are available for use with 110/220 VAC and
12VDC power sources. These shields are
commonly used for Delta-T measurements
and are deployed around the world by
NOAA and leading research organizations.
Met One’s Pyranometers are
used for measuring solar irradiance
on a horizontal or tilted plane.
We offer a complete line of first and
second class radiometers as well as
secondary standards and solar tracking
instrumentation. Typical uses include solar
monitoring for photovoltaic power plants
and solar radiation delta temperature
(SRDT) measurements. All Met One
pyranometers meet or exceed World
Meteorological Organization and ISO
9060:1990 standards.
Sonic Weather
Station
Met Station One
Met Station One – The industry
standard in accurate and affordable
weather stations. The MSO provides
key measurements: wind speed, wind
direction, ambient temperature, relative
humidity and barometric pressure in a
single convenient package. The MSO is a
digital sensor and provides RS-232/485,
and SDI-12 output signals.
Sonic Weather Station – The
smallest and most rugged multiparameter weather station available.
The SWS measures wind speed, wind
direction, ambient temperature, relative
humidity and barometric pressure in a
single convenient package. The SWS is a
digital device and provides RS-232/485, and
SDI-12 output signals. A smart choice for
Air Quality networks, hydro-meteorological
networks, and remote applications.
596 + t/rh/bp Sensor
596 PLUS – Our most accurate multiparameter sensor. It is compliant the
WMO & EPA measurement standards.
The 596+ not only provides ambient
temperature, relative humidity, and
barometric pressure measurements but
also supplies the calculated values for
air-density and dewpoint. The 596+ is a
digital device and sensor provides RS232/485, and SDI-12 output signals.
092
083E
Temp/RH
092 – Accurate pressure
measurements from sea-level to 10,000
feet. This digital barometer is used to
measure absolute atmospheric pressure.
This sensor is supplied with a permanent
NIST calibration.The 092 supplies analog
and digital outputs and is compatible
with any data logger capable of accepting
signals in voltage or serial format.
Turnkey Custom Meteorological Systems
MOI’s meteorological monitoring systems
feature quality sensors, components and
accessories. Sensors supplied with each
system cover the range of measurements,
level of accuracy and long life that user
require. Our sensors interface directly to
most data loggers and industry standard
Data Acquisition/ Management Systems.
Our Integrated Systems Group (ISG)
provides design expertise and equipment
knowledge to ensure accurate, reliable
data for commercial, industrial and military
markets. The MOI line of automated
observation systems provide accurate
and reliable meteorological, and air quality
data acquisition, recording and reporting.
Our products and systems are in service
worls wide with environmental protection
agencies, university research, exploration
projects, large and small industrial facilities,
agriculture and hydrology. Most Nuclear
Power plants around the United States
and many others around the world use
our systems. MOI systems are supplying
meteorologists, decision makers, and
researchers with vital data in some of
earth’s most hostile environments.
Met One Instruments, Inc’s is committed
to renewable energy and environmental
preservation. Our line of weather stations
and meteorological sensors are designed
to improve the measurement accuracy of
the world’s precious natural resources.
We offer class one wind sensors and high
accuracy solid-state weather stations to
measure and optimize power generation
from wind and solar farms.
Please contact us with your application
and our in house Sales, Service, and
Design team can assist you with New
Projects, Expansion of Existing Systems/
Networks, Upgrades, Sensor/ System
service, Training, and on-site services.
MOI Systems Engineers and dedicated
staff work with each customer to examine
the project requirement. Our team then
specifies the equipment and sensors
required. Pulling together years of
083E – Easy, accurate, reliable, Used
in meteorological studies throughout
the world, the 083E is a combination
temperature and relative humidity sensor.
The 083E provides analog and digital
outputs and is compatible with any data
logger capable of accepting signals
voltage or resistance format.
Three Level 100 Meter Weather Tower
WEB www.osop.com.pa
E-MAIL [email protected]
experience in the design, operation, and
maintenance of monitoring stations we
are able to beat deadlines and streamline
deliveries. Our systems are preassembled, pre-programmed, and tested
as a whole before shipping. The systems
are turn-key and ready for immediate
operation. Met One Instruments, Inc
directs a considerable percentage of our
annual revenue back into R&D activities
resulting in the continual improvement of
our products.
Automated Weather Stations
WEB www.osop.com.pa
E-MAIL [email protected]
Visual Weather Display