The Brand You Trust, The Power You Depend On. LSA 46.2 – 180 to 320 kVA Low Voltage Alternators - 4 Pole Compact & Rigid Industry best Efficiency Better motor starting capability High power density (Lighter weight) Superior thermal life by duty / 27 C H / 163 C 46.2 M3 46.2 M5 46.2 L6 46.2 VL 12 Load Application (AREP) 20% 15% 15% 10% 5% 46.2 M3 46.2 M5 46.2 L6 46.2 VL12 0% 0 100 200 300 400 Voltage Rise in % Voltage Dip in % Load Rejection (AREP) 20% 10% 5% 46.2 M3 46.2 M5 46.2 L6 46.2 VL12 0% 0 100 kVA at 0.8 P.F. 200 300 kVA at 0.8 P.F. Motor Starting (AREP) 30% 25% Voltage Dip in % 20% 15% 10% 46.2 M3 46.2 M5 46.2 L6 46.2 VL12 5% 0% 0 200 400 600 800 Locked rotor kVA at 0.6 P.F. 1. For a starting P.F. differing from 0.6, the starting kVA must be multiplied by (Sine φ /0.8) 2. For voltages other than 415V(Y) at 50 Hz, then kVA must be multiplied by (415/Other voltage)2 According to IS : 4722:2001. IS 13364, I.E.C. 60034-1/34-2. The values indicated are typical. © - This document is the property of EPGI, it cannot be reproduced in any form without prior written authorization. EPGI reserves the right to modify the design, technical specifications and dimensions of the products shown in this document. The descriptions cannot in any way be considered contractual. 400 EIAEPG/MKT/CAT/LSA46.2/AUGUST16/B Emerson Industrial Automation Electric Power Generation Pvt. Limited. #45, Nagarur, Huskur Road, Off Tumkur Road | 562 162 Bangalore | India T +91 80 67264992 | F +91 80 23717808 | www.leroy-somer.in [email protected] | [email protected]
© Copyright 2026 Paperzz