2 | SPANNERS
DOUBLE OPEN ENDED SPANNERS
PAGE 80
COMBINATION SPANNERS
PAGE 82
DOUBLE ENDED RING SPANNERS
PAGE 87
DOUBLE ENDED OPEN RING SPANNERS
PAGE 91
RATCHET WRENCHES
PAGE 92
DOUBLE ENDED FLEXI-JOINT SPANNERS
PAGE 94
HEAVY DUTY RING SPANNERS
PAGE 95
STRIKING FACE RING SPANNERS
PAGE 96
STRIKING FACE OPEN ENDED SPANNERS
PAGE 97
SINGLE-END SPANNERS
PAGE 97
BOX SPANNERS
PAGE 98
2
Spanners
Strong, extremely tough and durable.
STAHLWILLE spanners
1
2
Conventional spanners
When force is applied to a spanner, the greatest force acts on the joint between the
jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into
consideration. In the context of normal hard work, this can lead to the tool
breaking, causing considerable personal injury.
STAHLWILLE spanners
To reduce the danger of breakage, we add more material where the greatest loads
are to be found and take it away from the places that are not under such stress.
In this way, we are able to manufacture extremely sturdy, slim and light tools
which also facilitate working in confined spaces due to their compact designs.
2
Extremely resilient, remarkably durable
1 Drop-forged
1 Optimum
from high-grade special steels.
hardening in continuous furnaces with no scale build-up or skin
decarburisation.
1 Gentle
3
quenching in oil.
Light and easy to handle
1 High
resistance to bending and low weight thanks to STAHLWILLE's typical
double-T profile.
1 Snug-fitting,
4
Key benefits when tightening and loosening screws
1 Tougher
than any bolt thanks to the forged double hex.
1 Thinner
than conventional rings – facilitating work in confined spaces.
1 Higher
5
skin-friendly surfaces thanks to STAHLWILLE's rounded finish.
than standard nuts – prevents the spanner jamming on the nut.
Quality assured
STAHLWILLE's Quality Assurance System was awarded an internationally
recognised certificate in accordance with DIN ISO 9001 by the DQS
(German Association for the Certification of Quality Assurance Systems).
Reproducible and identical –
tailored and perfectly
chrome-plated over nickel,
non-flaking finish
78
N℅m
Test results STAHLWILLE combination spanners No 13 (open-jaw)
N℅m
2000
2000
1800
1800
1600
1600
1400
1400
1200
1200
1000
1000
800
800
600
600
400
400
200
200
0
Size
Thread M
Test results STAHLWILLE combination spanners No 13 (ring)
2
0
6
8 10 13 16 17 18 19 21 22 24 27 30 32 34 36 41
3.5 5
6
8 10 *10 12 *12 14 *14 16 18 20 *22 22 24 27
Size
Thread M
6
8 10 13 16 17 18 19 21 22 24 27 30 32 34 36 41
3.5 5
6
8 10 *10 12 *12 14 *14 16 18 20 *22 22 24 27
Test results for STAHLWILLE
Test results for STAHLWILLE
Test results to DIN 899 or ISO 1711
Test results to DIN 899 or ISO 1711
Clamping torque for 8.8 fasteners at 100% tensile
Clamping torque for 12.9 fasteners at 100% tensile
yield strength (μ = 0.14)
yield strength (μ = 0.14)
*Reference to older screw thread standards
1
Load zones in
standard-quality spanners
2
Load zones in spanners
by STAHLWILLE
3
Resistant to bending thanks to the
double-T profile
Open-jaw spanners in oil
4
Snug-fitting, skin-friendly surfaces
thanks to STAHLWILLE's rounded
finish
STAHLWILLE No 8 striking face
double hex box-spanners are
tougher, thinner and higher.
79
Spanners
10
Double open ended spanners
10a
DIN 3110, ISO 10102 (metric sizes), Chrome Alloy Steel, chrome plated.
Double open ended spanners
'
A
"
L
mm
b1
mm
b2
a
mm mm
g
S
40 43 16 20
40 43 20 24
40 43 24 28
40 43 28 32
1
1/4 x 5/16
5/16 x 3/8
3/8 x 7/16
7/16 x 1/2
140
140
155
170
16
18
23
26
18
23
26
30
4
4.5
4.8
5.3
21
34
48
58
10
10
10
10
40 43 32 34
40 43 34 36
40 43 35 38
40 43 36 38
1
1/2 x 9/16
9/16 x 5/8
19/32 x 11/16
5/8 x 11/16
190
205
205
205
30
32
35
36
32
36
40
40
5.3
5.8
5.8
5.8
73
96
105
101
10
10
10
10
40 43 36 40
40 43 38 40
40 43 38 42
40 43 40 44
1
5/8 x 3/4
11/16 x 3/4
11/16 x 13/16
3/4 x 7/8
220
220
235
235
36
40
40
42
42
42
47
49
6.7
6.7
7.3
7.3
135
135
167
177
10
10
10
10
40 43 41 42
40 43 44 46
40 43 46 48
40 43 52 58
25/32 x 13/16
7/8 x 15/16
15/16 x 1
1 1/8 x 1 5/16
235
250
270
300
45
49
53
64
47
53
55
75
7.3
7.8
8.3
9.4
190
235
303
502
10
10
5
5
Code
'
15°
b1
b2
2
a
L
'
L
mm
b1
mm
b2
mm
a
mm
R
g
S
40 03 04 05
4x5
40 03 55 07 5.5 x 7
40 03 06 07
6x7
40 03 07 08
7x8
100
120
120
140
12.5
14.8
15.5
17
14
17
17
18
3.4
3.7
3.7
4.0
11
19
17
25
10
10
10
10
40 03 08 09
40 03 08 10
40 03 10 11
40 03 10 12
1
8x9
8 x 10
10 x 11
10 x 12
140
140
155
170
18
18
23
23
21
23
26
28
4.0
4.5
4.8
5.3
21
33
40
51
10
10
10
10
40 03 10 13
40 03 11 13
40 03 12 13
40 03 12 14
1
10 x 13
11 x 13
12 x 13
12 x 14
170
170
170
170
23
26
28
28
30
30
30
32
5.3
5.3
5.3
5.3
57
55
64
63
10
10
10
10
40 03 13 14
40 03 13 15
40 03 13 17
40 03 14 15
1
13 x 14
13 x 15
13 x 17
14 x 15
190
190
205
190
30
30
30
32
32
35
38
35
5.3
5.3
5.8
5.3
70
73
92
81
10
10
10
10
40 03 14 17
40 03 16 17
40 03 16 18
40 03 17 19
1
14 x 17
16 x 17
16 x 18
17 x 19
205
205
220
220
32
36
36
38
38
38
40
42
5.8
5.8
6.7
6.7
99
100
125
131
10
10
10
10
40 03 18 19
40 03 18 21
40 03 19 22
40 03 20 22
1
18 x 19
18 x 21
19 x 22
20 x 22
220
235
235
235
40
40
42
45
42.5
47
49
49
6.7
7.3
7.3
7.3
147
170
179
185
10
10
10
10
40 03 21 23
40 03 21 24
40 03 22 24
40 03 24 26
1
21 x 23
21 x 24
22 x 24
24 x 26
250
250
250
270
47
47
49
53
51
53
53
57.5
7.8
7.8
7.8
8.3
225
215
232
293
5
5
5
5
40 03 24 27
40 03 25 28
40 03 27 30
40 03 27 32
1
24 x 27
25 x 28
27 x 30
27 x 32
280
285
300
300
53
55
60
60
60
62
66
70
8.3
8.3
9.4
9.4
299
309
412
418
5
5
5
5
40 03 30 32
40 03 30 34
40 03 32 36
40 03 34 36
1
30 x 32
30 x 34
32 x 36
34 x 36
300
300
325
325
66
66
70
75
70
75
80
80
9.4
9.4
10
10
451
480
546
619
5
5
5
1
40 03 36 41
40 03 41 46
36 x 41
41 x 46
375
425
80
88
88
11
94.5 12
800
1030
1
1
Code
'
A
mm
1
'
'
10, 10a
R
Sets: Double open ended spanners,
in roll-up wallet
Roll-up wallet made of extremely tough textile with Velcro fastener.
'
Code
No
96 40 03 05
10/8
'
96 40 03 14
96 40 03 07
96 40 03 06
1
Content
mm/"
R
g
6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22
10/9 1) 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22; 21 x 24
10/10 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22; 24 x 27;
30 x 32
10/12 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22; 21 x 23;
24 x 27; 25 x 28; 30 x 32
96 40 43 06
10a/7
96 40 43 07
10a/11
'
1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 5/8 x 3/4;
11/16 x 13/16; 7/8 x 15/16; 1 1/8 x 1 5/16
1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 9/16 x 5/8;
19/32 x 11/16; 5/8 x 3/4; 11/16 x 13/16; 3/4 x 7/8;
25/32 x 13/16; 7/8 x 15/16; 1 1/8 x 1 5/16
745
918
1540
2125
1242
1870
) packed in carton
1
'
ES 10/10, 5.5x7–22x24 mm
175 x 350 x 60 mm, 10 pieces
'
R
Code
g
'
96 83 81 30
1100
'
No 10
'
83 81 20 33
'
80
Empty tray
sizes 5.5 x 7; 8 x 10; 10 x 12; 11 x 13;
12 x 14; 14 x 17; 17 x 19; 18 x 21;
19 x 22; 22 x 24 mm
106
ES 10/10, 6x7–30x32 mm
TCS 10/10, 6x7–24x27 mm MF
x
ö
175 x 350 x 70 mm, 10 pieces
175 x 350 x 70 mm, 10 pieces
'
'
R
Code
g
'
96 83 81 26
1515
'
No 10
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 19; 20 x 22;
24 x 27; 30 x 32 mm
'
83 81 20 22
'
Empty tray
R
Code
g
'
96 83 03 58
1320
'
No 10
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 24; 24 x 27 mm
'
2
112
TCS 10/11, 6x7-34x36 mm
TCS 10/10, 6x7–30x32 mm
x
öU
x
ö
175 x 350 x 82 mm, 11 pieces
'
R
Code
g
'
96 83 01 67
2056
'
No 10
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 21; 19 x 22;
24 x 27; 30 x 32; 34 x 36 mm
'
350 x 350 x 30 mm, 10 pieces
'
R
Code
TCS 10+13+24/30
g
'
96 83 81 82
x
ö
1550
'
No 10
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 19; 20 x 22;
24 x 27; 30 x 32 mm
'
TCS 10/10, 6x7–30x32 mm MF
530 x 350 x 75 mm, 30 pieces
x
ö
'
R
Code
g
'
96 83 06 05
3724
'
No 10
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 24 mm
No 13
sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19; 21; 22; 24; 27; 30; 32 mm
No 24
size 10 x 11 mm
175 x 350 x 75 mm, 10 pieces
'
R
Code
'
g
'
96 83 03 53
1437
'
No 10
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 21; 19 x 22;
24 x 27; 30 x 32 mm
'
'
'
TCS 10a/9
x
ö
TCS 10/10, 6x7–24x27 mm
x
ö
175 x 350 x 70 mm, 9 pieces
'
175 x 350 x 66 mm, 10 pieces
g
'
R
Code
96 83 87 79
96 83 81 87
No 10a
1287
'
No 10
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 19; 20 x 22;
21 x 24; 24 x 27 mm
1555
'
g
'
'
R
Code
'
sizes 1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16;
x 11/16; 5/8 x 3/4; 3/4 x 7/8;
25/32 x 13/16; 15/16 x 1; 1 1/8 x 1 5/16"
19/32
'
81
Spanners
12
Small double open ended
spanners ELECTRIC
13
Chrome Alloy Steel, chrome plated.
75°
2
Combination spanners OPEN-BOX
AS - drive
DIN 3113 form A/ISO 7738 form A (metric sizes),
Chrome Alloy Steel, chrome plated.
b
a
b
L
'
a2
d a1
b
15°
L
'
Code
mm
L
mm
40 06 32 32
40 06 35 35
40 06 04 04
40 06 45 45
1
3.2
3.5
4
4.5
70
70
70
70
10.5
10.5
10.5
10.5
2
2
2
2
5
5
5
5
10
10
10
10
40 08 55 00
40 08 06 06
40 08 07 07
40 08 08 08
40 06 05 05
40 06 55 55
40 06 06 06
40 06 07 07
5
5.5
6
7
78
78
78
91
12.6
12.6
12.6
14.7
2
2
2
2
7
7
6
9
10
10
10
10
40 08 09 09
40 08 10 10
40 08 11 11
40 08 12 12
'
A
b
mm
a
mm
R
g
S
Code
'
1
A
mm
L
mm
5.5
6
7
8
b
mm
d
mm
a1
mm
a2
mm
R
g
S
100
105
110
115
14.8
9.2
15.5
9.9
17
11.3
18
12.4
3.5
3.6
3.9
4.2
5.8
6
6
7
13
15
20
21
10
10
10
10
120
125
135
140
21
23
26
28
13.4
14.8
16.4
17.8
4.5
4.8
4.8
5.3
7
7
8
8.5
27
35
43
46
10
10
10
10
1
9
10
11
12
40 06 08 08
40 06 09 09
40 06 10 10
40 06 11 11
1
8
9
10
11
96
103
105
116
16.8
18.9
21
24.2
3
3
3
3
16
19
22
27
10
10
10
10
40 08 13 13
40 08 14 14
40 08 15 15
40 08 16 16
1
13
14
15
16
160
165
170
180
30
32
35
37
19.1
20.6
21.9
23.2
5.3
5.3
5.3
5.8
8.5
8.5
8.5
10
57
68
73
89
10
10
10
10
40 06 12 12
40 06 13 13
40 06 14 14
12
13
14
116
131
131
24.2
28.3
28.3
3
3
3
27
37
36
10
10
10
40 08 17 17
40 08 18 18
40 08 19 19
40 08 20 20
1
17
18
19
20
190
200
230
230
38
40
42
45
24.6
26
27.5
29
5.8
6.7
6.7
7
10
11.5
11.5
13
99
126
142
176
10
10
10
10
40 08 21 21
40 08 22 22
40 08 23 23
40 08 24 24
1
21
22
23
24
260
260
280
280
47
49
53
53
30.3
31.8
33.5
34.9
7.3
7.3
7.8
7.8
13
13
14
14
216
220
251
254
10
10
5
5
40 08 25 25
40 08 26 26
40 08 27 27
40 08 28 28
1
25
26
27
28
300
300
300
320
55
57.5
60
62
36.3
37.8
39.2
40.6
8.4
8.4
8.4
8.4
14.5
14.5
14.5
14.5
281
315
345
368
5
5
5
5
40 08 29 29
40 08 30 30
40 08 32 32
40 08 34 34
1
29
30
32
34
330
330
360
450
64
66
70
75
41.9
43.2
45.8
48
8.9
8.9
9.4
9.4
16
16
16.5
17
420
404
484
683
5
5
5
1
40 08 36 36
40 08 38 38
40 08 41 41
40 08 46 46
1
36
38
41
46
460
480
480
500
80
87
88
94.5
50.8
53.6
57.8
65.2
40 08 50 50
40 08 55 55
40 08 60 60
50
55
60
530 103
560 114
590 125
1
'
12a
Small double open ended spanners
ELECTRIC
'
A
"
L
mm
b
mm
a
mm
R
g
S
40 46 10 10
40 46 12 12
40 46 13 13
40 46 14 14
1
5/32
3/16
13/64
7/32
70
70
78
78
10.5
10.5
12.6
12.6
2
2
2
2
5
5
7
6
10
10
10
10
40 46 15 15
40 46 16 16
40 46 18 18
40 46 20 20
1
15/64
1/4
9/32
5/16
78
91
91
96
12.6
14.7
14.7
16.8
2
2
2
3
6
9
9
16
10
10
10
10
40 46 22 22
40 46 24 24
40 46 28 28
40 46 32 32
1
11/32
3/8
7/16
1/2
103
105
116
131
18.9
21
24.2
28.3
3
3
3
3
19
22
28
37
10
10
10
10
40 46 34 34
9/16
131
28.3
3
36
10
Code
'
'
12, 12a
Sets: Small double open ended
spanners ELECTRIC, in roll-up wallet
Roll-up wallet made of extremely tough textile with Velcro fastener.
'
10
11
11
13
18
19
19
20
787
915
1055
1352
1
1
1
1
73
14
81
15
89.8 16
21
22
24
1700
2193
2825
1
1
1
STAHLWILLE »AS-Drive«
AS - drive
The rings of STAHLWILLE combination spanners and double ended
ring spanners are equipped with the AS-Drive* profile: this permits
high transmission of forces to the lands of nuts and bolts without
damaging them. No longer will you have to worry about stripping
'
Code
'
No
96 40 06 53 12/10
96 40 06 51 12/15
Content
mm/"
4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11
3.2; 3.5; 4; 4.5; 5; 5.5; 6; 7; 8; 9; 10; 11;
12; 13; 14
96 40 46 54 12a/13 5/32; 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16; 11/32;
3/8; 7/16; 1/2; 9/16
'
82
R
g
161
296
270
the corners off nuts and bolts.
*Anti-Slip-Drive
13a
Combination spanners OPEN-BOX
ES 13/10, 6–15 mm
'
Code
'
A
"
L
mm
b
mm
d
mm
a1
mm
a2
mm
R
14
14
14
14
9.8
9.8
9.8
9.8
3
3
3
3
3.2
3.2
3.2
3.2
10
10
10
9
5
5
5
5
g
S
40 48 12 12
40 48 13 13
40 48 14 14
40 48 15 15
1
3/16
13/64
7/32
15/64
95
95
95
95
40 48 16 16
40 48 18 18
40 48 20 20
40 48 22 22
1
1/4
9/32
5/16
11/32
105
110
115
120
15.5
17
18
21
10.2
11.3
12.4
13.4
3.6
3.9
4.2
4.5
6
6
7
7
14
17
20
26
10
10
10
10
40 48 24 24
40 48 28 28
40 48 32 32
40 48 34 34
1
3/8
7/16
1/2
9/16
125
135
160
165
23
26
30
32
14.3
16.4
18.8
20.6
4.8
4.8
5.3
5.3
7
8
8.5
8.5
32
41
57
68
10
10
10
10
40 48 35 35
40 48 36 36
40 48 38 38
40 48 40 40
1
19/32
5/8
11/16
3/4
170
180
200
230
35
37
40
42
21.9
23.2
25.3
27.5
5.3
8.5
5.8 10
6.7 11.5
6.7 11.5
74
88
116
144
10
10
10
10
40 48 41 41
40 48 42 42
40 48 44 44
40 48 46 46
1
25/32
13/16
7/8
15/16
235
260
260
280
45
47
49
53
29
30
31.8
34.9
7
7.3
7.3
7.8
13
13
13
14
175
204
217
255
5
5
5
5
40 48 48 48
40 48 50 50
40 48 52 52
40 48 54 54
1
1
1 1/16
1 1/8
1 3/16
300
300
330
332
55
60
64
66
37.2
39.2
41.4
43.2
8.4
8.4
8.9
8.9
14.5
14.5
16
16.5
286
327
380
398
5
5
5
1
40 48 56 56
40 48 58 58
40 48 60 60
40 48 62 62
1
1 1/4
1 5/16
1 3/8
1 7/16
360
450
460
461
70
74
80
80
45.8
9.4
47
9.6
49.3 10
51.4 10
16.5
17
18
18
504
617
796
770
5
1
1
1
40 48 64 64
40 48 66 66
40 48 69 69
40 48 70 70
1
1 1/2
1 5/8
1 13/16
1 7/8
480 87
480 88
500 94.5
530 103
53.6
58
65.3
68.4
11
11
13
14
19
19
20
21
961
1021
1343
1779
1
1
1
1
40 48 72 72
2
530 103
74
14
21
1817
1
'
13, 13a
175 x 350 x 40 mm, 10 pieces
'
R
Code
g
'
96 83 81 27
525
'
No 13
83 81 20 23
'
2
sizes 6; 7; 8; 9; 10; 11; 12; 13; 14;
15 mm
'
Empty tray
105
ES 13/8, 16–24 mm
175 x 350 x 54 mm, 8 pieces
'
R
Code
g
'
96 83 81 28
1440
'
No 13
'
83 81 20 24
'
sizes 16; 17; 18; 19; 20; 21; 22; 24 mm
Empty tray
112
ES 13/5, 27–32 mm
Sets: Combination spanners OPEN-BOX
530 x 350 x 30 mm, 5 pieces
'
R
Code
g
'
96 83 81 04
2280
'
No 13
'
83 81 20 40
'
Content
mm/"
R
430
758
746
915
Code
No
96 40 08 13
96 40 08 01
96 40 08 08
96 40 08 02
1
13/6 )
13/9
13/10KT 1)
13/11
7; 8; 10; 13; 17; 19
9; 10; 11; 12; 13; 14; 17; 19; 22
8; 9; 10; 11; 12; 13; 14; 15; 17; 19
8; 9; 10; 11; 12; 13; 14; 15; 17; 19; 22
96 40 08 03
96 40 08 16
96 40 08 04
96 40 08 05
13/15
13/16 2)
13/17
13/26 2)
6; 7; 8; 9; 10; 11; 12; 13; 17; 19; 22; 24; 27; 30; 32
7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22; 24
6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22
6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22;
23; 24; 25; 26; 27; 28; 29; 30; 32
3
1
96 40 48 03 13a/8
96 40 48 12 13a/10KT 1)
96 40 48 04 13a/20 2)
'
287
TCS 13/18, 6–24 mm
'
'
sizes 27; 28; 29; 30; 32 mm
Empty tray
7/16; 1/2; 9/16; 5/8; 11/16; 3/4; 13/16; 7/8
1/4; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 5/8; 11/16; 3/4
1/4; 9/32; 5/16; 11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16;
3/4; 25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8; 1 1/4
x
ö
g
2236
1620
1480
530 x 350 x 35 mm, 18 pieces
'
R
4705
959
750
Code
g
'
96 83 81 83
1850
'
No 13
3210
Standard packing: Roll-up wallet made of extremely tough textile with
Velcro fastener.
1
) carton with clear view cover
2
) packed in carton
3
) in convenient clip holder
'
sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19; 20; 21; 22; 24 mm
'
83
Spanners
TCS 13/17, 6–24 mm
TCS 13/25, 5.5-34 mm
x
ö
x
ö
530 x 350 x 80 mm, 25 pieces
'
R
Code
96 83 20 96
96 83 01 64
4550
'
g
'
g
'
'
2
R
Code
350 x 350 x 60 mm, 17 pieces
No 13
sizes 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14;
15; 16; 17; 18; 19; 20; 21; 22; 23; 24;
27; 29, 30; 32; 34 mm
1615
'
'
No 13
sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19; 21; 22; 24 mm
'
TCS 12+13+14/29
x
ö
TCS 13/17, 6–24 mm MF
x
ö
530 x 350 x 80 mm, 29 pieces
'
R
Code
g
'
96 83 01 93
3752
'
350 x 350 x 60 mm, 17 pieces
'
'
R
Code
No 12
sizes 5.5; 12; 14 mm (2x)
No 13
sizes 7; 11 mm (2x);
6; 8; 9; 10; 12; 13; 14; 15; 16; 17; 18;
19; 20; 22; 24; 30; 32; 36 mm (1x)
No 14
size 17 mm
g
'
96 83 03 51
1552
'
'
'
No 13
sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19; 21; 22; 24 mm
'
TCS 13a/19
x
ö
TCS 13/21, 6–34 mm
x
ö
530 x 350 x 75 mm, 21 pieces
'
R
Code
g
'
96 83 01 74
3571
'
350 x 350 x 55 mm, 19 pieces
'
R
Code
g
'
No 13
'
sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19; 21; 22; 24; 27; 30; 32;
34 mm
96 83 87 78
'
No 13a
'
84
2000
sizes 3/16; 7/32; 1/4; 9/32; 5/16; 11/32; 3/8;
7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4; 25/32;
13/16; 7/8; 15/16; 1"
TCS 13a/23
14
Combination spanners OPEN-BOX, long
AS - drive
x
ö
DIN 3113 form B/ ISO 7738 form B, Chrome Alloy Steel, chrome plated.
530 x 350 x 35 mm, 23 pieces
'
R
Code
g
'
96 83 08 85
'
130a
A L
mm mm
b
mm
d
mm
a1
mm
a2
mm
40 10 06 06
40 10 07 07
40 10 08 08
40 10 09 09
6
7
8
9
125
135
145
155
14
9.5
16 10.8
17.5 12.1
19 13.3
4.5
5
5
5.5
40 10 10 10
40 10 11 11
40 10 12 12
40 10 13 13
1
10
11
12
13
165
180
180
195
21
23.5
25.5
27.5
14.6
15.9
17.3
18.6
40 10 14 14
40 10 15 15
40 10 16 16
40 10 17 17
1
14
15
16
17
210
215
230
240
29.5
31
33
35
15°
40 10 18 18
40 10 19 19
40 10 20 20
40 10 21 21
1
18
19
20
21
255
265
280
280
40 10 22 22
40 10 24 24
40 10 27 27
40 10 30 30
1
22
24
27
30
40 10 32 32
40 10 34 34
40 10 36 36
40 10 41 41
32
34
36
41
Combination spanners
'
1
Fed. Spec. GGG-W-636 E, HPQ® high performance steel, chrome plated.
a2
d a1
L
'
L
mm
b
mm
d
mm
a1
mm
a2
mm
R
g
S
40 57 16 16
40 57 18 18
40 57 20 20
40 57 22 22
1/4
9/32
5/16
11/32
105
110
115
120
14.2
15.5
17
19
9.8
10.9
12
13.1
3.6
4.1
4.5
4.9
6
6
7
7
13
16
20
25
10
10
10
10
40 57 24 24
40 57 28 28
40 57 32 32
40 57 34 34
3/8
125
135
150
165
20.5
23
27
30.5
14.1
16.2
18.2
20.6
5.2
6
6.5
7
7
8
8.5
8.5
32
42
61
78
10
10
10
10
A
"
'
1
7/16
1/2
9/16
'
130aSP
2
'
Code
AS - drive
b
10°
L
sizes 3/16; 13/64; 7/32; 15/64; 1/4; 9/32; 5/16;
11/32; 3/8; 7/16; 1/2; 9/16; 19/32; 5/8; 11/16; 3/4;
25/32; 13/16; 7/8; 15/16; 1; 1 1/16; 1 1/8"
No 13a
a2
t
2726
'
Code
d a1
b
'
14
t
mm
R
g
S
6
7
7
8
7
8
8
9
18
25
28
34
10
10
10
10
5.5
6
6
6.5
8
9
9
10
9
10
10
11
43
55
61
83
10
10
10
10
20.1
21.4
22.7
24.1
6.5
7
7
7.5
10
11
11
12
11
13
14
15
88
109
108
151
10
10
10
10
37
39.5
41.5
43
25.5
27
28.5
29.8
7.5
8
8
8.5
12
13
13
13
16
18
19
19
151
190
219
244
10
10
10
10
300
330
385
415
45
50
56
63
31.3
8.5
34.3
9.5
38.6 10.5
42.6 12
14
14
16
18
20
22
24
26
268
363
502
645
10
5
5
5
430
460
480
560
67
72
74
84
45.2
48
50.8
57.8
18
18
19
20
27
666
27
900
28
951
32 1322
5
1
1
1
12
13
13
14
Sets: Combination spanners
OPEN-BOX, long
Spline drive combination spanners
MS-33787, MIL-W-8982, HPQ® high performance steel, chrome plated.
'
a2
d a1
b
15°
Code
'
L
Spline A
size
"
L
mm
b
mm
d
mm
a1
mm
a2
mm
R
g
S
40 58 16 16
40 58 20 20
40 58 24 24
40 58 28 28
1
8
10
12
14
1/4
5/16
3/8
7/16
105
115
125
135
14.2
17
20.5
23
10
12.2
14.8
16.5
3.6
4.5
5.2
6
5.6
6.4
7
8
13
21
31
43
5
5
5
5
40 58 32 32
40 58 34 34
16
18
1/2
9/16
150
165
27
30.5
18.7
20.8
6.5
7
8.5
8.5
59
84
5
5
'
No
96 40 10 08
96 40 10 09
96 40 10 07
96 40 10 06
14/6 2)
10; 13; 17; 19; 22; 24
14/9 2)
10; 11; 13; 17; 19; 22; 24; 27; 30
14/10 KT 1)8; 10; 11; 12; 13; 14; 16; 17; 18; 19
14/11
8; 9; 10; 11; 12; 13; 14; 15; 17; 19; 22
'
'
Content
mm
Code
1
6; 7; 8; 9; 10; 11; 12; 13; 17; 19; 22;
24; 27; 30; 32
96 40 10 10 14/15N 2) 10; 11; 12; 13; 14; 15; 16; 17; 18; 19;
21; 22; 24; 27; 30
96 40 10 05 14/17
6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16;
17; 18; 19; 20; 21; 22
R
g
1175
2395
1235
1131
96 40 10 04 14/15
'
3370
3165
1874
Standard packing: Roll-up wallet made of extremely tough textile with
Velcro fastener.
1
) packed in plastic with transparent cover
2
) packed in carton
'
85
Spanners
ES 14/10, 6–15 mm
TCS 14/18, 6-24 mm
x
öU
175 x 350 x 39 mm, 10 pieces
'
R
Code
g
'
96 83 81 05
700
'
2
No 14
sizes 6; 7; 8; 9; 10; 11; 12; 13; 14;
15 mm
'
350 x 350 x 60 mm, 18 pieces
'
83 81 20 34
'
Empty tray
110
R
Code
g
'
96 83 87 50
ES 14/8, 16–24 mm
2600
'
No 14
sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19; 20; 21; 22; 24 mm
'
TCS 14/21, 6-36 mm
x
öU
175 x 350 x 51 mm, 8 pieces
'
R
Code
g
'
96 83 81 06
1820
'
No 14
'
83 81 20 35
'
sizes 16; 17; 18; 19; 20; 21; 22; 24 mm
Empty tray
112
530 x 350 x 75 mm, 21 pieces
'
TCS 14/5, 17–21 mm
R
Code
g
'
96 83 87 71
x
ö
5100
'
No 14
'
sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15;
16; 17; 18; 19; 21; 22; 24; 27; 30; 32;
36 mm
175 x 350 x 30 mm, 5 pieces
'
R
Code
g
'
96 83 81 88
1065
'
No 14
'
Tool Control System
The safety inlay system
sizes 17; 18; 19; 20; 21 mm
1 Designed to fit our Tool Trolleys and Tool Boxes
1 With yellow signal cut-outs to show whether all tools are
in their places
TCS 14/8, 8–16 mm
x
ö
175 x 350 x 30 mm, 8 pieces
'
R
Code
g
'
96 83 81 89
660
'
'
86
No 14
sizes 8; 10; 11; 12; 13; 14; 15; 16 mm
4014
Combination spanners
20
Chrome-Vanadium, chrome plated.
Double ended ring spanners
AS - drive
StahlwilleSTABIL®
offset, DIN 838/ISO 10104 (metric sizes), Chrome Alloy Steel,
chrome plated.
'
d2
Code
A L
mm mm
b
mm
d
mm
a1
mm
a2
mm
t
mm
R
g
S
40 14 65 65
40 14 70 70
40 14 75 75
40 14 80 80
65
70
75
80
133
98
143 105
153 110
163 119
22
24
26
28
33
35
38
41
49.5
53.5
57.5
63.5
4500
5500
6500
8000
1
1
1
1
'
'
16
710
760
810
860
Combination spanners OPEN-BOX
ISO 3318, Chrome Alloy Steel, chrome plated.
a2
15°
L
'
Code
A L
mm mm
b
mm
d
mm
a1
mm
a2
mm
R
g
S
40 09 32 32
40 09 35 35
40 09 40 40
40 09 45 45
1
3.2
3.5
4
4.5
75
75
85
85
10
10
12.5
12.5
6.6
6.6
7.8
7.8
3
3
3
3
3.2
3.2
3.2
3.2
6
6
9
8
10
10
10
10
40 09 50 50
5
95
14
9.8
3
3.2
11
10
'
'
16/5
Set: Combination spanners OPEN-BOX;
3.2–5 mm, in textile bag
t
a1
L
2
75°
'
L
mm
d1
mm
d2
mm
a1
mm
a2
mm
41 04 06 07 6 x 7
41 04 08 09 8 x 9
41 04 08 10 8 x 10
41 04 10 11 10 x 11
165
180
180
200
10.5
13.1
13.1
15.8
11.8
14.5
15.8
17.2
6
7
7
9
7
8
9
9
18
20
21
23
46
62
61
93
10
10
10
10
41 04 10 13
41 04 12 13
41 04 13 17
41 04 14 15
1
10 x 13
12 x 13
13 x 17
14 x 15
220
220
245
245
15.8
18.6
20
21.3
20
20
25.3
22.6
9
9
10
10
10
10
12
12
25
25
27
27
122
126
169
163
10
10
10
10
41 04 16 17
41 04 17 19
41 04 18 19
41 04 18 21
1
16 x 17
17 x 19
18 x 19
18 x 21
255
270
275
300
23.9
25.3
26.6
26.6
25.3
28
28
30.7
11
12
12
12
12
13
13
13
27
29
29
31
181
220
228
279
10
10
10
10
41 04 19 22
41 04 20 22
41 04 21 23
41 04 21 24
1
19 x 22
20 x 22
21 x 23
21 x 24
300
300
315
330
28
29.4
30.7
30.7
32.1
32.1
33.4
34.7
13
13
13
13
14
14
14
14
31
31
31
34
315
317
312
384
10
5
5
5
41 04 22 24
41 04 24 26
41 04 24 27
41 04 25 28
1
22 x 24
24 x 26
24 x 27
25 x 28
330
330
330
350
32.1
34.7
34.7
36
34.7
37.3
38.6
40
14
14
14
14
14
15
15
15
34
34
34
34
368
427
447
414
5
5
5
5
41 04 27 30
41 04 27 32
41 04 30 32
41 04 30 34
27 x 30
27 x 32
30 x 32
30 x 34
360
360
365
365
38.3
39.3
42.6
42.6
42.6
47.2
45.4
48
15
15
15
15
15
16
16
16
37
37
37
37
595
596
603
660
5
5
5
1
17
19
18
20
40 1015
45 1709
1
1
Code
'
A
mm
1
d a1
b
d1 a2
1
41 04 36 41 36 x 41 440 53
60
41 04 46 50 46 x 50 535 65.2 73
'
20a
t
R
mm g
S
Double ended ring spanners
'
Code
'
'
Code
Content
mm
R
96 40 09 02
3.2; 3.5; 4; 4.5; 5
46
'
'
g
A
"
L
d1
d2
mm mm mm
a1 a2
t
mm mm mm
g
S
20
23
25
27
61
88
131
168
10
10
10
10
12
13
13
14
27
29
31
31
177
235
280
299
10
10
5
5
14
14
15
16
31
34
34
37
333
363
419
581
5
5
5
1
41 44 16 20
41 44 24 28
41 44 32 34
41 44 34 36
1/4 x 5/16
3/8 x 7/16
1
1/2 x 9/16
9/16 x 5/8
180
200
220
245
11.8
15.8
20
21.3
13.1
7
17.2
9
21.3
9
25.3 10
7
9
10
12
41 44 35 38
41 44 36 40
41 44 38 42
41 44 40 44
1
19/32 x 11/16
5/8 x 3/4
11/16 x 13/16
3/4 x 7/8
255
270
300
300
23.9
23.9
25.3
28
25.3
28
30.7
32.1
11
12
12
13
41 44 41 42
41 44 44 46
41 44 46 48
41 44 52 58
25/32 x 13/16
7/8 x 15/16
15/16 x 1
1 1/8 x 1 5/16
300
330
330
365
29.4
32.1
34.7
42.6
32.1
34.7
37.3
45.4
13
14
14
15
'
R
87
Spanners
20, 20a
Sets: Double ended ring spanners
ES 20/10, 6x7–30x32 mm
StahlwilleSTABIL®
offset.
530 x 350 x 44 mm, 10 pieces
'
R
Code
2
g
'
96 83 81 07
2620
'
No 20
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 19; 20 x 22;
24 x 27; 30 x 32 mm
'
'
Code
No
96 41 04 08
20/7N
96 41 04 05
20/8
96 41 04 09
20/9
96 41 04 07
20/10
'
1
96 41 04 06
20/12
96 41 44 02
20a/6
96 41 44 05
20a/10
'
Content
mm/"
R
g
6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19;
6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22
6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22; 21 x 24
6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22; 24 x 27;
30 x 32
6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22; 21 x 23;
24 x 27; 25 x 28; 30 x 32
1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 5/8 x 3/4;
11/16 x 13/16; 7/8 x 15/16
1/4 x 5/16; 3/8 x 7/16; 1/2 x 9/16; 9/16 x 5/8;
19/32 x 11/16; 5/8 x 3/4; 11/16 x 13/16;
3/4 x 7/8; 25/32 x 13/16; 7/8 x 15/16
83 81 20 44
'
Empty tray
TCS 20/8, 6x7–19x22 mm
930
x
ö
1220
1650
2331
309
175 x 350 x 45 mm, 8 pieces
'
3137
1244
R
Code
g
'
96 83 81 92
1300
'
No 20
2260
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 21; 19 x 22 mm
'
packed in carton
TCS 20/8, 6x7–19x22 mm MF
'
x
ö
ES 20/8, 6x7–19x22 mm
175 x 350 x 45 mm, 8 pieces
'
R
Code
1266
'
No 20
'
83 81 20 83
'
96 83 03 56
Empty tray
1323
'
g
96 83 81 67
g
'
'
'
R
Code
175 x 350 x 30 mm, 8 pieces
No 20
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 21; 19 x 22 mm
'
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 21; 19 x 22 mm
TCS 20/10, 6x7–30x32 mm
103
x
ö
350 x 350 x 45 mm, 10 pieces
'
R
Code
g
'
96 83 01 66
2450
'
No 20
'
88
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 21; 19 x 22;
24 x 27; 30 x 32 mm
23
Double ended ring spanners
180a
AS - drive
Double ended ring spanners
AS - drive
shallow offset, DIN 897/ISO 10104 (metric sizes),
Chrome Alloy Steel, chrome plated.
d2
d1
short, shallow offset, Fed. Spec. GGG-W-636 E,
S.B.A.C. Techn. Spec. T.S. 48 up to size 1/2",
HPQ® high performance steel, chrome plated.
t1
a2 10°
t2
a1
L
Code
'
A
mm
L
mm
d1 d2
mm mm
a1
mm
a2
mm
t1
mm
t2
mm
R
g
t2
a1 10°
d2
d1
'
a2
t1
L
S
'
41 07 06 07
41 07 08 09
41 07 10 11
41 07 12 13
1
6x7
8x9
10 x 11
12 x 13
170
179
188
203
9.5
12.1
14.6
17.3
10.8
13.3
15.9
18.6
6
7
8.5
9.5
7
8
9.5
10.5
7
8
9
10
8
9
10
11
41
49
66
78
10
10
10
10
41 07 14 15
41 07 16 17
41 07 17 19
41 07 18 19
1
14 x 15
16 x 17
17 x 19
18 x 19
219
248
250
251
20.1
22.7
24.1
25.5
21.4
24.1
27
27
10.5
11.5
12.5
12.5
11.5
12.5
13.5
13.5
11
14
15
16
13
15
18
18
109
144
162
157
10
10
10
10
41 07 20 22
41 07 21 23
41 07 24 27
41 07 30 32
20 x 22
21 x 23
24 x 27
30 x 32
280
328
376
429
28.5
29.8
34.3
42.6
31.3
32.9
38.6
45.2
13.5
13.5
14.5
18
14.5
14.5
16
18
19
19
22
26
20
22
24
27
223
281
426
608
5
5
5
5
'
23/8
Set: Double ended ring spanners;
6x7–20x22 mm
Code
A
"
'
41 60 16 20
41 60 24 28
41 60 32 34
41 60 34 36
'
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
9/16 x 5/8
230a
L
d1
mm mm
d2
mm
a1
mm
a2
mm
t1
mm
t2
mm
R
g
S
107
122
141
148
11.8
16.7
20.7
22.6
7
6.7
8.7
9.5
8
7.8
9.5
10.5
7.2
9
11
11.5
7.4
10
12
12.5
26
42
62
87
10
10
10
10
10.2
14.6
18.5
20.7
Double ended ring spanners
AS - drive
shallow offset, SAE AS 954 (dimensions and test loads);
Fed. Spec. GGG-W-636E, S.B.A.C. Techn. Spec. T.S. 48 up to size 1/2",
HPQ® high performance steel, chrome plated.
shallow offset.
d2
d1
t1
a2 10°
t2
a1
L
'
Code
'
Code
'
96 41 07 04
'
packed in carton
'
Content
mm
6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;
18 x 19; 20 x 22
R
g
870
A
d2
mm
a1
mm
a2
mm
t1
mm
t2
mm
R
g
S
1/4 x 5/16
1
5/16 x 11/32
5/16 x 3/8
3/8 x 7/16
180
195
195
215
10.2
11.9
11.9
14.6
11.9
13.5
14.6
16.7
5.2
7
6
7.9
6
8
7.9
8.7
7.9
8
10.8
11.4
8.8
9
12.4
11.7
45
45
54
74
10
10
10
10
41 61 28 32
41 61 32 34
41 61 34 36
41 61 36 40
1
7/16 x 1/2
1/2 x 9/16
9/16 x 5/8
5/8 x 3/4
225
235
245
274
16.7
19.5
20.7
22.6
19.5
20.7
22.6
27.5
8.7
9.1
9.5
11.1
9.1
9.5
11.5
12
11.9
12.2
13.8
14.8
12.6
12.9
13.9
15.8
105
119
122
156
10
10
10
10
41 61 38 40
41 61 42 44
41 61 46 48
41 61 48 50
1
11/16 x 3/4
13/16 x 7/8
15/16 x 1
1 x 1 1/16
275
301
340
368
25.4
29.5
34.1
36.5
27.5
31.7
36.5
38.6
11.1
13.5
14.5
15
12
14.5
15
16
15.2
19
22
23
15.8
20
23
24
158
175
375
460
10
5
5
5
41 61 52 56
1 1/8 x 1 1/4 403 40.8 45
16
18
25
27
620
5
'
"
L
d1
mm mm
41 61 16 20
41 61 20 22
41 61 20 24
41 61 24 28
'
One like the other:
precisely and flaking
chrome-plated
over nickel.
89
2
Spanners
220
Double ended ring spanners
21
AS - drive
AS - drive
StahlwilleSTABIL®
extra long, 15° angled, SAE AS 954-E (test loads) (American sizes),
HPQ® high performance steel, chrome plated.
d2
2
d1
a2
straight, DIN 837/ISO 10103, Chrome Alloy Steel, chrome plated.
15°
a1
L
d2
'
L
mm
d1
mm
d2
mm
a1
mm
a2
mm
R
g
S
41 03 55 07 5.5 x 7
41 03 06 08
6x8
41 03 09 11
9 x 11
41 03 10 11 10 x 11
185
205
250
250
8.8
9.8
14.2
15.5
11
12.1
16.7
16.7
5.3
5.6
8
8
5.8
6
8.7
8.7
28
34
80
80
5
5
5
5
41 03 12 14
41 03 13 14
41 03 17 19
41 03 18 19
1
12 x 14
13 x 14
17 x 19
18 x 19
290
290
365
365
18.3
18.7
25
25.5
20.7
20.7
27.5
27.5
9.5
9.5
11
11
9.5
9.5
12
12
162
160
296
295
5
5
5
5
41 03 19 22
41 03 20 22
19 x 22
20 x 22
408
409
27.5
28.5
31.5
31.5
13
13
14.3
14.3
520
515
5
5
Code
'
A
mm
1
'
220a
Double ended ring spanners
'
Code
'
A
"
L
mm
d1
mm
d2
mm
a1
mm
a2
mm
R
g
S
5.3
5.6
8
9.5
5.8
6
8.7
9.5
29
33
79
160
5
5
5
5
298
291
5
5
41 43 14 16
41 43 16 20
41 43 24 28
41 43 32 34
1
7/32 x 1/4
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
184
205
250
290
9
9.9
14
18.5
9.9
12.2
16
21
41 43 36 40
41 43 38 40
5/8 x 3/4
11/16 x 3/4
363
365
22.6
25
27
27
'
Double ended ring spanners
220aSP
11
11
12
12
L
'
mm
A
L
mm
d1
mm
d2
mm
a
mm
R
g
S
41 05 06 07
41 05 08 09
41 05 08 10
41 05 10 11
1
6x7
8x9
8 x 10
10 x 11
100
115
115
130
9.6
12.5
12.5
15.4
11
14
15.4
16.6
4.5
5.5
6
6
14
19
18
28
10
10
10
10
41 05 12 13
41 05 13 17
41 05 14 15
41 05 16 17
1
12 x 13
13 x 17
14 x 15
16 x 17
150
170
165
170
18.2
19.5
21
23.8
19.5
25
22.5
25
6.5
8
7.5
8
42
57
55
68
10
10
10
10
41 05 17 19
41 05 18 19
41 05 18 21
41 05 19 22
1
17 x 19
18 x 19
18 x 21
19 x 22
185
185
210
210
25
26.3
26.3
27.6
27.6
27.6
30.5
32.4
8
9
9
9
78
84
107
109
10
10
5
5
41 05 20 22
41 05 21 24
41 05 24 27
41 05 27 32
1
20 x 22
21 x 24
24 x 27
27 x 32
210
235
290
320
29
30.5
34.7
38.5
32.4
34.7
38.5
45.5
9
10
11
12
109
128
225
283
5
5
5
5
41 05 30 32
41 05 30 34
30 x 32
30 x 34
325
325
43
43
45.5
48.5
12
12
289
307
5
5
Code
'
'
21
Double ended ring spanners
a
d1
Sets: Double ended ring spanners
StahlwilleSTABIL®
extra long, with spline-drive profile, 15° angled, MS-33787, MIL-W-8982,
HPQ® high performance steel, chrome plated.
d2
d1
a2
15°
a1
L
'
'
Code
'
Spline
size
A
"
L
d1 d2
mm mm mm
41 16 07 09
41 16 08 10
41 16 12 14
41 16 16 18
1
7x9
8 x 10
12 x 14
16 x 18
7/32 x 9/32
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
185 9.4 11.5
205 10.4 12.4
250 14.9 17
290 19 21
41 16 18 20
41 16 22 24
41 16 26 30
41 16 28 32
18 x 20
22 x 24
26 x 30
28 x 32
9/16 x 5/8
11/16 x 3/4
13/16 x 15/16
7/8 x 1
315
365
410
430
'
90
21
25
29.5
32
23
27.5
34
36.5
a1 a2
mm mm
5.3
5.6
8
9.5
10
11
13
13.5
R
g
5.8 28
6
33
8.7 79
9.5 161
11
12
14.3
15
205
310
496
582
S
5
5
5
5
5
5
5
5
Code
No
96 41 05 03
21/7
'
96 41 05 01
'
8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22
21/10 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22; 24 x 27;
30 x 32
packed in carton
'
Content
mm
R
g
397
943
21TX
Double ended ring spanners
H Double ended open ring spanners,
24
angled
for external TORX® screws, straight, Chrome Alloy Steel, chrome plated.
AS - drive
hexagon, DIN 3118/ISO 3318 (metric sizes), Chrome Alloy Steel,
chrome plated.
d2
d1
a1
a2
L
'
Code
size
'
41 25 06 08
E6 x E8
41 25 10 12 E10 x E12
41 25 14 18 E14 x E18
41 25 20 24 E20 x E24
'
L
mm
d1
mm
115.5 9.6
149.5 13.7
185 17.8
227 24.7
d2
mm
a1
mm
a2
mm
R
g
S
11.6 4.5
5.5
15.7 6.5
7.5
22.5 8
9.5
29.2 10.5 12.5
17
33
71
129
10
10
10
10
d2 m2
▲
▲
▼
▼
Double ended ring spanners STARTER
AS - drive
a2
a1
L
L
d1
d2
a1
a2 m1 m2 R
mm mm mm mm mm mm mm g S
A
Code
mm
41 08 08 10
41 08 09 11
41 08 10 11
41 08 10 12
1
8 x 10
9 x 11
10 x 11
10 x 12
145
155
155
160
17.5
18.5
19.5
19.5
19.5
21.5
21.5
22.5
7
8.5
8.5
8.5
41 08 11 13 11 x 13 170 21.5 24
41 08 12 14 12 x 14 180 24 26
ISO 3318, Chrome Alloy Steel, chrome plated.
10°
'
'
27
m1 d1
8.5
9
9
9.5
9 10
9.5 10.5
'
6.3
6.7
7.1
7.1
7.1
8.6
8.6
9
8.6 10
9 11
39
54
55
59
10
10
10
10
80
89
10
10
H Double ended open ring spanners,
24a
angled
'
"
'
r1
41 48 16 20
41 48 20 24
41 48 24 28
41 48 32 34
'
a
d1
d2
r2
L
L d1
d2
a1
a2 m1 m2 R
mm mm mm mm mm mm mm g S
A
Code
1/4 x 5/16
5/16 x 3/8
3/8 x 7/16
1/2 x 9/16
105
145
155
180
Code
'
mm
L
d1
d2
a
r1
r2
mm mm mm mm mm mm
19.5
19.5
24.5
24.5
5.5 7
7
8.5
8.5 9
9.5 10.5
3.7 5
6.3 7.1
7.1 8.6
9.5 11
32
39
57
87
10
10
10
10
angled
AS - drive
g
S
41 09 10 12
41 09 11 13
41 09 14 16
41 09 14 17
1
10 x 12
11 x 13
14 x 16
14 x 17
150
150
179
179
6.5
6.5
7.5
7.5
35
35
36
36
60
60
64
64
53
50
91
89
10
10
10
10
41 09 15 17
41 09 16 18
41 09 19 22
15 x 17
16 x 18
19 x 22
184 22.5 25
7.5
200 25.3 27.5 8.5
225 28 32
9
38
47
48
66
68
67
96
130
164
10
5
5
'
16.5
16.5
21
21
R
18
19.5
21.5
26
I Double ended open ring spanners,
24
'
A
16.5
17.5
19.5
24
bi-hexagon, DIN 3118/ISO 3318 (metric sizes), Chrome Alloy Steel,
chrome plated.
d2 m2
▲
▲
▼
▼
m1 d1
a2
10°
STAHLWILLE »AS-Drive«
a1
L
'
AS - drive
Code
'
A
mm
L d1 d2
mm mm mm
a1
a2 m1 m2 R
mm mm mm mm g S
10.5
12
12
13
12
13
13
15
11
13
14
15.8
14
15.8
15.8
17
115 10
155 5
151 10
192 5
15
16
16
20
16
17.5
19
22
17
18
20
22
18
20
27
24
251
310
414
455
41 08 14 17
41 08 16 19
41 08 17 19
41 08 19 22
1
14 x 17
16 x 19*
17 x 19
19 x 22
200
220
220
230
26
29
30
33
damaging them. No longer will you have to worry about stripping
41 08 22 24
41 08 24 27
41 08 27 36
41 08 30 32
22 x 24
24 x 27
27 x 36
30 x 32
245
270
300
300
37 40.5
40.5 44.5
42 54
48.5 50.5
the corners off nuts and bolts.
* to be discontinued
The rings of STAHLWILLE combination spanners and double ended
ring spanners are equipped with the AS-Drive* profile: this permits
high transmission of forces to the lands of nuts and bolts without
*Anti-Slip-Drive
'
30
33
33
37
5
5
5
5
'
I Double ended open ring spanners,
24a
angled
'
Code
'
41 48 36 40
41 48 40 48
'
A
"
5/8 x 3/4
3/4 x 1
L
d1
d2
a1
a2 m1 m2 R
mm mm mm mm mm mm mm g S
218
232
29
33
33
12
40.2 13
13 12.7 15.8 148
16 15.8 19 199
5
5
91
2
Spanners
ES 24/7, 8x10–19x22 mm
240
Sets: Ratchet wrenches FastRatch
175 x 350 x 30 mm, 7 pieces
'
R
Code
g
'
96 83 81 71
835
'
2
No 24
sizes 8 x 10; 10 x 11; 11 x 13; 12 x 14;
14 x 17; 17 x 19; 19 x 22 mm
'
83 81 20 86
'
Empty tray
103
'
TCS 24/7, 8x10-19x22 mm
x
öU
Content
mm/"
R
Code
No
96 41 10 01
240/5 10 mm - 3/8"; 11 mm - 7/16"; 14 mm - 9/16";
17 mm - 21/32"; 19 mm - 3/4"
240/6 8 mm - 5/16"; 10 mm - 3/8"; 13 mm - 1/2";
14 mm - 9/16"; 17 mm - 21/32"; 19 mm - 3/4"
'
96 41 10 02
'
g
1022
1094
packed in carton
'
175 x 350 x 35 mm, 7 pieces
'
TCS 240/6
R
Code
g
'
96 83 87 58
x
ö
780
'
No 24
sizes 8 x 10; 10 x 11; 11 x 13; 12 x 14;
14 x 17; 17 x 19; 19 x 22 mm
'
240
Ratchet wrenches FastRatch
175 x 350 x 35 mm, 6 pieces
patent, specially suitable for union nuts.
Using a single wrench, it is possible to tighten/loosen both metric and
imperial nuts and bolts.
Made of hardened and tempered stainless steel.
'
R
Code
g
'
96 83 87 74
1163
'
No 240
'
17
Combination ratcheting spanners
OPEN-RATCH
reversible, bi-hexagon, 72 teeth, for work in confined spaces,
tight ratchet angle of only 5°, ring end offset by 15°, Chrome Alloy Steel,
chrome plated.
a
b
sizes 10; 11; 13; 14; 17; 19 mm
L
'
L
mm
b
mm
a
mm
R
g
S
41 10 08 08
41 10 10 10
41 10 11 11
41 10 12 12
1
18
10
11
12
5/16
3/8
7/16
15/32
121.4
133.3
140.4
146.3
16
20
23
25
4
4
5
5
60
70
103
100
1
1
1
1
41 10 13 13
41 10 14 14
41 10 16 16
41 10 17 17
13 1/2
14 9/16
16 5/8
17 21/32
168.4
174.6
191.3
201.7
26.8
29.6
32.8
34.3
6
6
7
7
154
180
270
292
1
1
1
1
41 10 18 18 18 11/16
41 10 19 19 19 3/4
212.8
238.5
36.2
38.5
7
7
310
367
1
1
Code
'
1
'
A
mm/"
15°
L
'
Code
mm
A
L
mm
b
mm
d
mm
a1
mm
a2
mm
R
g
S
41 17 08 08
41 17 09 09
41 17 10 10
41 17 11 11
1
8
9
10
11
144
150
158
165
17.0
18.8
21.7
23.0
18.0
19.5
21.0
22.0
4.7
5.3
5.7
6.1
7.4
7.4
8.4
8.4
38
49
67
68
5
5
5
5
41 17 12 12
41 17 13 13
41 17 14 14
41 17 15 15
1
12
13
14
15
173
182
190
202
25.2
26.5
29.5
31.3
23.5
25.0
26.5
28.0
6.4
6.6
7.3
7.5
8.4
8.4
8.4
8.4
84
89
110
128
5
5
5
5
41 17 16 16
41 17 17 17
41 17 18 18
41 17 19 19
16
17
18
19
215
229
240
252
33.4
36.3
38.0
39.0
29.0
30.5
32.0
34.0
7.7
7.9
8.4
8.7
10.0
10.0
11.5
11.5
153
177
198
224
5
5
5
5
'
'
92
a2
d a1
b
17
Sets: Combination ratcheting spanners
OPEN-RATCH, in roll-up wallet
25aN
Ratchet ring spanners
as No 25, but made of solid steel, Fed. Spec. GGG-W-001405.
Roll-up wallet made of extremely tough textile with Velcro fastener.
'
L
mm
d1
mm
d2
mm
a
mm
R
g
S
41 56 16 20
41 56 20 22
41 56 24 28
41 56 32 34
1
1/4 x 5/16
5/16 x 11/32
3/8 x 7/16
1/2 x 9/16
109
109
139
174
15
15
20
26
17
17
23
30
9
9
9
12
65
60
90
164
1
1
1
1
41 56 36 38
41 56 40 44
41 56 42 46
5/8 x 11/16
3/4 x 7/8
13/16 x 15/16
205
235
235
33
36
36
36
40
40
12
13
12
257
296
281
1
1
1
Code
A
"
'
'
2
'
Content
mm
R
Code
No
96 41 17 05
96 41 17 12
17/5
8; 10; 13; 17; 19
17/12 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19
'
'
25, 25a
g
732
1665
Sets: Ratchet ring spanners,
in roll-up wallet
Roll-up wallet made of extremely tough textile with Velcro fastener.
TCS 17/12
x
ö
175 x 350 x 45 mm, 12 pieces
'
R
Code
g
'
96 83 06 49
1460
'
No 17
sizes 8; 9; 10; 11; 12; 13; 14; 15; 16;
17; 18; 19 mm
'
'
25
Ratchet ring spanners
Code
No
96 41 13 02
96 41 13 01
25/4
25/7
96 41 56 02
96 41 56 01
25a/4N
25a/7N
'
AS - drive
with bi-hexagon, straight, 22 teeth, chrome plated.
'
Content
mm/"
R
9 x 10; 12 x 13; 14 x 15; 17 x 19
7 x 8; 9 x 10; 10 x 11; 12 x 13; 14 x 15;
16 x 18; 17 x 19
3/8 x 7/16; 1/2 x 9/16; 5/8 x 11/16; 3/4 x 7/8
1/4 x 5/16; 5/16 x 11/32; 3/8 x 7/16; 1/2 x 9/16;
5/8 x 11/16; 3/4 x 7/8; 13/16 x 15/16
556
g
1150
1000
1271
ES 25/7, 7x8–17x19 mm
d1
a
d2
L
175 x 350 x 30 mm, 7 pieces
'
L
mm
d1
mm
d2
mm
a
mm
R
g
S
41 13 07 08 7 x 8
41 13 09 10 9 x 10
41 13 10 11 10 x 11
41 13 12 13 12 x 13
109
139
170
170
15
20
26
26
17
23
30
30
9
9
12
12
55
80
144
135
1
1
1
1
41 13 14 15 14 x 15
41 13 16 18 16 x 18
41 13 17 19 17 x 19
170
205
205
26
33
33
30
36
36
12
12
12
126
196
188
1
1
1
Code
'
A
mm
1
'
'
R
Code
g
'
96 83 81 08
1040
'
No 25
'
83 81 20 38
'
Empty tray
sizes 7 x 8; 9 x 10; 10 x 11; 12 x 13;
14 x 15; 16 x 18; 17 x 19 mm
111
93
Spanners
TCS 25/7
c Double ended flexi-joint spanner FLEXI
29
AS - drive
x
ö
hexagon, Chrome Alloy Steel, chrome plated.
175 x 350 x 30 mm, 7 pieces
'
g
'
96 83 87 51
2
No 25
sizes 7 x 8; 9 x 10; 10 x 11; 12 x 13;
14 x 15; 16 x 18; 17 x 19 mm
'
L
'
Code
mm
A
L
mm
d1
mm
d2
mm
a1
mm
a2
mm
R
g
S
43 01 06 07
6x7
180
9.5
11
23
23
51
10
'
25aSP
d1
d2
984
'
a1
a2
R
Code
Spline drive ratchet ring spanners
'
straight, 22 teeth, chrome plated.
f Double ended flexi-joint spanners FLEXI
29
AS - drive
bi-hexagon, Chrome Alloy Steel, chrome plated.
'
Code
Spline
size
"
L
mm
d1
mm
d2
mm
a
mm
R
A
g
S
41 57 08 10 8 x 10
41 57 12 14 12 x 14
41 57 16 18 16 x 18
41 57 20 22 20 x 22
1/4
3/8
1/2
5/8
x 5/16
x 7/16
x 9/16
x 11/16
109
139
174
205
15
20
26
33
17
23
30
36
9
9
12
12
59
84
153
250
1
1
1
1
41 57 24 28 24 x 28
3/4
x 7/8
235
36
40
13
279
1
'
1
'
25B
a1
a2
d1
d2
L
'
L
mm
d1
mm
d2
mm
a1
mm
a2
mm
R
g
S
43 01 08 09 8 x 9
43 01 10 11 10 x 11
43 01 10 13 10 x 13
43 01 12 13 12 x 13
201
202
230.5
228
11.9
14.7
14.7
17.2
13.4
15.9
18.4
18.4
26
30.5
30
33
27.5
32
33.5
33.5
81
102
137
153
10
10
10
10
43 01 14 15
43 01 16 17
43 01 16 18
43 01 17 19
1
14 x 15
16 x 17
16 x 18
17 x 19
227
247
249
250
19.7
22.2
22.2
23.7
20.9
23.7
24.7
26.3
35
38.5
38.5
39
37
39
40
41
197
234
267
277
10
10
10
5
43 01 18 19
43 01 20 22
43 01 21 23
43 01 24 27
18 x 19
20 x 22
21 x 23
24 x 27
246.5
287.5
286.5
349.5
24.7
27.3
28.6
32.4
26.3
29.8
31.1
36.1
40
45.5
46.5
50.5
41
48
50
60.5
294
430
447
716
5
5
5
5
Code
Ratcheting bit holder
'
for hexagon BITS, magnetic location, reversible heads angled,
chrome plated.
A
mm
1
d1
a1
d2
'
a2
L
Code
'
41 54 16 20
'
inside
b"
L
mm
1/4 x 5/16
26a
138
d1
mm
20
d2
mm
a1
mm
23
15
a2
mm
17
R
g
105
'
S
1
Ratchet ring spanners
Code
'
43 41 24 28
43 41 32 34
43 41 36 38
'
AS - drive
29/7
reversible, with bi-hexagon, angled, 22 teeth, chrome plated.
d1
L
'
41 55 16 20
41 55 24 28
41 55 32 34
'
94
d1
mm
d2
mm
a1
mm
a2
mm
R
g
S
202 14
227 18.1
249.5 22.1
16
20
24
30.5
35
39
32
37
40
98
195
269
5
5
5
"
3/8 x 7/16
1/2 x 9/16
5/8 x 11/16
f Set: Double ended flexi-joint
spanners FLEXI; 8x9–20x22 mm
'
'
Code
L
mm
A
a
d2
"
L
mm
d1
mm
d2
mm
a
mm
R
g
S
1/4 x 5/16
3/8 x 7/16
1/2 x 9/16
109
139
170
15
20
26
17
23
30
9
9
12
55
80
140
1
1
1
A
f Double ended flexi-joint spanners FLEXI
29a
'
Code
'
96 43 01 01
'
Content
mm
8 x 9; 10 x 11; 12 x 13; 14 x 15; 16 x 17;
18 x 19; 20 x 22
Standard packing: carton.
'
R
g
1503
ES 29/6, 8x9–18x19 mm
5
Heavy duty ring spanners
without tubular handle, Chrome Alloy Steel,
chrome plated.
175 x 350 x 30 mm, 6 pieces
R
Code
b
g
'
96 83 81 09
1185
'
No 29
sizes 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19 mm
'
83 81 20 41
'
Empty tray
105
TCS 29/6, 8x9-18x19 mm
x
öU
175 x 350 x 35 mm, 6 pieces
'
R
Code
g
'
96 83 87 64
1079
'
No 29
sizes 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19 mm
'
h
a
'
L1
L2
'
Code
mm
A
L1
mm
L2
mm
b
mm
42 02 00 24
42 02 00 27
42 02 00 30
42 02 00 32
1
24
27
30
32
180
190
200
235
555
560
565
730
38
41
47
49
17
17
18
18
29.5
31.5
33.5
34
381
421
525
712
5 1/2 -1
1
1
2
1
1
1
1
42 02 00 36
42 02 00 38
42 02 00 41
42 02 00 42
1
36
38
41
42
245
250
265
265
735
740
750
750
54
56
62
62
20
21
22
22
35.5
37.5
39.5
39.5
816
810
910
919
2
2
2
2
1
1
1
1
42 02 00 46
42 02 00 50
42 02 00 55
42 02 00 60
1
46
50
55
60
280
290
300
345
910
920
925
1050
69
76
81
90
23
25.5
28
30.5
40 1192
42.51426
45.51541
49 2260
3
3
3
4
1
1
1
1
42 02 00 65
42 02 00 70
42 02 00 75
42 02 00 80
65
70
75
80
355
365
375
385
1060 98
1065 105
1070 110
1075 125
33
35.5
38
40.5
53 2603
55 2882
57.63058
59 3889
4
4
4
4
1
1
1
1
42 02 00 85 85
42 02 00 90 90
42 02 00 95 95
42 02 01 00 100
385
410
410
412
1075
1100
1100
1100
40.5
45
45
45
59
63
63
63
4
4
4
4
1
1
1
1
'
1
'
125
140
140
143
a
mm
h
mm
R
g
3648
5238
4630
4895
handle S
No 5a available on request
L2 = length with handle No 5 1/2
TCS 29/7, 8x9–20x22 mm
'
x
ö
5 1/2
Tubular handles
for heavy duty ring spanners No 5.
175 x 350 x 40 mm, 7 pieces
d
'
R
Code
h
L
g
'
96 83 01 95
1520
'
No 29
'
sizes 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22 mm
Tool Control System
The safety inlay system
'
Code
'
48 03 00 01
48 03 00 02
48 03 00 03
48 03 00 04
'
size
1
2
3
4
L
mm
460
610
760
860
d
mm
19
22
25
30
A
mm
24–30
32–42
46–55
60–100
A
R
"
3/16
1–1
1 1/4–1 11/16
1 3/4–2 1/4
2 3/8–3 7/8
g
S
605
1562
2820
3705
1
1
1
1
1 Designed to fit our Tool Trolleys and Tool Boxes
1 With yellow signal cut-outs to show whether all tools are
in their places
95
2
Spanners
8
Striking face ring spanners
4205
StahlwilleSTABIL®
Striking face ring spanners
DIN 7444, special steel, grey.
Chrome Alloy Steel, green painted.
'
'
mm
A
L
mm
b
mm
a
mm
R
g
S
42 01 00 32
42 01 00 36
42 01 00 41
42 01 00 46
1
32
36
41
46
195
195
200
250
47
52.4
59
65
24
26
29
32
661
684
896
1218
1
1
1
1
42 01 00 50
42 01 00 55
42 01 00 60
42 01 00 65
1
50
55
60
65
280
300
300
325
70
76
82.5
90.5
35
38
42
45
1555
2087
2394
3209
1
1
1
1
42 01 00 70
42 01 00 75
42 01 00 80
42 01 00 85
70
75
80
85
355
360
440
440
97
103.5
110
117
48
51
57
57
3649
4428
5895
6033
1
1
1
1
42 01 00 90
42 01 00 95
42 01 01 00
42 01 01 05
1
90
95
100
105
445
450
455
460
124
131
137
146
60
67
72
73
6885
7875
10224
10202
1
1
1
1
42 01 01 10
42 01 01 15
42 01 01 20
110
115
120
500
505
510
156
162
174
82
82
82
14492
14376
15308
1
1
1
Code
'
1
'
A
L
mm
b
mm
a
mm
R
g
S
42 05 00 24
42 05 00 26
42 05 00 27
42 05 00 28
1
24
26
27
28
160
160
180
180
42.5
42.5
46
47
15
15
16
15.5
200
200
260
275
1
1
1
1
42 05 00 30
42 05 00 32
42 05 00 33
42 05 00 36
1
30
32
33
36
190
195
195
205
51.5
53
53
60
16.5
16.5
16.5
19.5
365
353
350
505
1
1
1
1
42 05 00 37
42 05 00 38
42 05 00 41
42 05 00 42
1
37
38
41
42
205
205
225
225
60
60
66
66
19.5
19.5
20.5
20.5
500
500
715
671
1
1
1
1
42 05 00 46
42 05 00 47
42 05 00 48
42 05 00 50
1
46
47
48
50
240
240
240
250
75
75
75
80
22.5
22.5
22.5
23.5
915
975
920
1120
1
1
1
1
42 05 00 52
42 05 00 55
42 05 00 56
42 05 00 60
1
52
55
56
60
250
270
270
270
80
87.5
87.5
93.5
23.5
25
25
26
1075
1375
1320
1565
1
1
1
1
42 05 00 64
42 05 00 65
42 05 00 70
42 05 00 75
1
64
65
70
75
290
290
320
325
101
101
109.5
114.5
29
29
33
34
2300
2100
3000
2780
1
1
1
1
42 05 00 80
42 05 00 85
42 05 00 90
42 05 00 95
80
85
90
95
345
360
400
400
126
129
152
152
35
37
41.5
41.5
4100
3835
5180
4900
1
1
1
1
42 05 01 00
42 05 01 05
42 05 01 10
42 05 01 15
1
100
105
110
115
400
435
435
435
152
172
172
172
41.5
47.5
47.5
47.5
6560
6300
7960
7495
1
1
1
1
42 05 01 20
42 05 01 30
42 05 01 35
42 05 01 45
1
120
130
135
145
480
520
520
580
182
202
202
228
54
58
58
64
9900
12640
12120
18250
1
1
1
1
42 05 01 60
42 05 01 65
42 05 01 70
42 05 01 75
1
160
165
170
175
580
650
650
650
228
265
265
265
64
70
70
70
18800
28500
27500
27750
1
1
1
1
42 05 01 80
42 05 02 10
180
210
650
750
265
320
70
80
26340
41000
1
1
'
L
2
mm
Code
a
b
Additional spanner opening to DIN 7444 on request.
'
1
'
STAHLWILLE Striking face ring spanners
No 8 with bi-hexagon are stronger, thinner
and higher.
96
4205a
4004
Striking face ring spanners
'
Code
"
A
L
mm
b
mm
a
mm
R
g
S
42 45 00 56
42 45 00 58
42 45 00 64
42 45 00 66
1
1 1/4
1 5/16
1 1/2
1 5/8
190
190
205
230
52
52
58
66
17
17
18
20
350
350
500
700
1
1
1
1
42 45 00 67
42 45 00 69
42 45 00 70
42 45 00 72
1
1 11/16
1 13/16
1 7/8
2
230
240
240
255
66
74
74
80
20
22
22
24
700
975
975
1075
1
1
1
1
42 45 00 73
42 45 00 75
42 45 00 76
42 45 00 78
1
2 1/16
2 3/16
2 1/4
2 3/8
255
270
270
280
80
86
86
93
24
25
25
26
1075
1320
1340
1600
1
1
1
1
42 45 00 79
42 45 00 81
42 45 00 82
42 45 00 84
1
2 7/16
2 9/16
2 5/8
2 3/4
280
300
300
330
93
102
102
110
26
30
30
33
1600
2300
2300
2900
1
1
1
1
42 45 00 85
42 45 00 87
2 13/16
2 15/16
330
330
110
110
33
33
2900
2900
1
1
'
'
Additional spanner opening on request.
'
4204
Striking face open ended spanners
DIN 133, Special Tool Steel,
grey finish.
a
L
15°
a
b
L
'
mm
A
L
mm
b
mm
a
mm
R
g
S
40 04 02 40
40 04 02 70
40 04 03 00
40 04 03 20
1
24
27
30
32
215
238
261
273
50
56
62
66
8.9
9.8
10.8
11.8
147
193
268
315
1
1
1
1
40 04 03 60
40 04 04 10
40 04 04 60
40 04 05 00
1
36
41
46
50
300
335
369
412
74
83.5
93
102
12.8
12.8
14.8
17
421
555
770
1003
1
1
1
1
40 04 05 50
40 04 06 00
40 04 06 50
40 04 07 00
1
55
60
65
70
457
492
528
572
112
122
132
142
18
18
19
20
1267
1650
1900
2425
1
1
1
1
40 04 07 50
40 04 08 00
40 04 08 50
40 04 09 00
75
80
85
90
608
645
690
690
152
162
173
173
21
22
23
23
2758
2963
3717
3570
1
1
1
1
40 04 09 50
40 04 10 00
40 04 10 50
40 04 11 00
1
95
100
105
110
847
847
1000
1000
195
195
217
217
25
25
28
28
5943
5500
8400
9000
1
1
1
1
40 04 11 50
40 04 12 00
40 04 12 50
40 04 13 00
1
115
120
125
130
1000
1000
1000
1000
225
225
225
225
28
28
28
28
8500
8500
7934
8500
1
1
1
1
40 04 13 50
135
1000
225
28
8000
1
Code
'
1
b
Single-end spanners
DIN 894, Special Tool Steel,
grey finish.
'
4025
'
Code
mm
A
L
mm
b
mm
a
mm
R
g
S
42 04 00 27
42 04 00 30
42 04 00 32
42 04 00 36
1
27
30
32
36
180
190
190
215
56
62
62
76
16
17
17
17.5
321
451
424
698
1
1
1
1
42 04 00 41
42 04 00 46
42 04 00 50
42 04 00 55
1
41
46
50
55
235
255
275
300
86
98
105
116
18.5
20
21
23
923
1245
1445
2057
1
1
1
1
42 04 00 60
42 04 00 65
42 04 00 70
42 04 00 75
1
60
65
70
75
320
342
375
375
128
138
154
154
24.5
27
30
30
2559
3285
4573
4163
1
1
1
1
42 04 00 80
42 04 00 85
42 04 00 90
42 04 00 95
80
85
90
95
408
408
445
445
174
174
194
194
34
34
38
38
6059
5871
7600
7600
1
1
1
1
42 04 01 00
42 04 01 05
100
105
485
485
215
215
44
44
11500
11200
1
1
'
1
'
Single-end spanners, adjustable
right-handed, DIN 3117/ISO 6787,
B shape, jaw offset 22°,
Chrome Vanadium,
chrome plated.
b
a
22°
L
'
Code
size
max. mm
A
L
mm
b
mm
a
mm
R
g
S
40 25 00 04
40 25 00 06
40 25 00 08
40 25 00 10
1
4
6
8
10
13
20
24
29
114
159
206
257
33
48
60
71
9.5
12
13.5
16
53
123
241
410
5
5
5
5
40 25 00 12
40 25 00 15
40 25 00 18
12
15
18
34
43
53
309
384
460
83
103
120
708
1287
2105
5
1
1
'
'
19
25
30
97
2
Spanners
4026
Single-end spanners, adjustable
10750
Sets: Box spanners
left-handed, DIN 3117/ISO 6787,
A shape, jaw offset 15°,
Chrome-Vanadium, gunmetal finish.
a
b
L
15°
'
Code
size
max. mm
A
L
mm
b
mm
a
mm
R
g
S
40 26 00 04
40 26 00 06
40 26 00 08
40 26 00 10
1
4
6
8
10
13
20
24
29
114
159
206
257
33
48
60
71
9.5
12
13.5
16
50
138
247
397
5
5
5
5
40 26 00 12
40 26 00 15
40 26 00 18
12
15
18
34
43
53
309
384
460
83
103
120
699
1324
2076
5
1
1
'
2
'
19
25
30
'
Code
'
TCS 4026/3
Content
mm
No
R
g
96 43 12 02 10750/7
8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22
96 43 12 05 10750/11 6 x 7; 8 x 9; 10 x 11; 12 x 13; 14 x 15;
16 x 17; 18 x 19; 20 x 22; 21 x 23;
24 x 27; 30 x 32
x
ö
'
830
1850
ES 10750/10, 6x7–20x22 mm
175 x 350 x 30 mm, 3 pieces
'
R
Code
g
'
96 83 87 65
1402
'
No 4026
'
sizes 8; 10; 12
175 x 350 x 30 mm, 10 pieces
'
10750
Box spanners
R
Code
g
'
DIN 896 Type B, made of seamlessly drawn precision steel tubing,
recessed at both ends, Chrome Alloy Steel, surface polished and chrome
plated.
96 83 81 68
1132
'
No 10750
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 19; 20 x 22 mm
No 10750 1/2
sizes 6; 7
'
d2
d1
'
83 81 20 84
L
'
mm
A
L
mm
d1
mm
d2
mm
R
g
S
43 33 06 07
43 33 08 09
43 33 10 11
43 33 12 13
1
6x7
8x9
10 x 11
12 x 13
110
110
125
145
10.5
13
16
19
11.5
14.5
17
20.5
26
38
50
78
10
10
10
10
43 33 14 15
43 33 16 17
43 33 17 19
43 33 18 19
14 x 15
16 x 17
17 x 19
18 x 19
145
155
160
160
21.5
24
26
27.5
22.5
26
28.5
28.5
78
127
199
199
10
10
10
10
'
1
43 33 20 22
43 33 21 23
43 33 24 26
43 33 24 27
1
20 x 22
21 x 23
24 x 26
24 x 27
170
170
190
190
29.5
30.5
34.5
34.5
32
33
37
38.5
232
251
300
301
5
5
5
5
43 33 30 32
43 33 32 36
43 33 36 41
43 33 41 46
1
30 x 32
32 x 36
36 x 41
41 x 46
205
225
225
245
42
45
50
56
45
50
56
62
382
535
648
755
5
2
2
2
43 33 46 50
43 33 55 60
46 x 50
55 x 60
245
245
62
70
68
76
878
1178
2
2
'
103
TCS 10750/10, 6x7-20x22 mm
'
Code
Empty tray
x
öU
175 x 350 x 40 mm, 10 pieces
'
R
Code
g
'
96 83 87 56
1130
'
No 10750
sizes 6 x 7; 8 x 9; 10 x 11; 12 x 13;
14 x 15; 16 x 17; 18 x 19; 20 x 22 mm
No 10750 1/2
sizes 6; 7
'
'
10750 1/2
Tommy bars
for No 10750, stepped.
'
Code
size
48 01 00 06
48 01 00 07
48 01 00 08
6
7
8
'
'
L = Length
'
98
for No 10750
A mm
Length
mm
R
g
S
6 x 7–14 x 15
16 x 17–24 x 27
30 x 32–55 x 60
180
320
630
57
338
1400
1
1
1