UCAO 4-9 (PDF 262,8 kB)

UCAO 4-9
Closure for Inline Splicing upto 60F
Features and Benefits
• Inline Splicing
• Standard Splice Trays with
Single Tray Access
• Upto 60F
• Accommodating Heatshrink or
Crimp Splice Protectors
• Mechanical Sealing
• Upto 4 Cables (or cable loop)
• Full Range of Optional Extras
for Custom Configurations
UCAO 4-9
Standard Splice Trays
For storing of mechanical or fusion splices as well as excess fiber length. Two buffer tubes
can be fixed at each of the four entries of
the tray. For easier access at a future time
it is recommended to store a maximum of
12 single fiber splices. The fiber excess
length should be 1200 mm and is stored in
the tray. With bending diameters between
60 and 80 mm it is guaranteed that the
stored fibers are free of any stress and
attenuation increase.
For fiber management type "E" with single
tray access, each tray has to be protected
by the transparent cover which is snapped
onto the tray.
Splice Organizers for Standard Splice Trays
For storing the splices safely in the trays, different organizers are available according to
the selected splice protector.
The organizers are simply snapped into the
trays – one for crimp splice protectors for
up to 12 splices or two for heat-shrink
splice protectors for up to 6 splices each.
Another type of organizer is used to store
either five heat-shrink protectors for 4-fiber
ribbons or for five mechanical splices
CamSplice A standard splice tray can
take up to two of these organizers.
Data Sheet: UCAO 4-9 Cebit 2002-en.doc
February 2002
COPYRIGHT© 2002
Corning Cable Systems GmbH & Co. KG
P.O. Box 70 03 09
81303 Munich, Germany
www.corning.com/cablesystems/europe
CCS reserves the right to improve, enhance, and modify the features and
specifications of CCS’s products without prior notification. The
information in this data sheet has been reproduced in good faith and is
accurate, to the best of CCS’s knowledge, at the time of printing.
However, CCS makes no warranty as to, and will not be liably on any
basis for, the information contained within this data sheet.