HIGH VISCOSITY LIQUID PUMPS
FLUX-HIGH VISCOSITY
LIQUID PUMPS
– HIGHLY ACCLAIMED...
FLUX high viscosity liquid pumps have been tried and
tested in numerous industrial sectors around the world.
FLUX pumps are available in a variety of types and
models designed to meet every requirement for transferring thin to high viscosity media.
All models are easy to operate and maintain.
Naturally, they all carry the advanced design and safety
features that users expect from FLUX. For the last 50
years, we have manufactured innovative, high-quality
products. Operators readily acknowledge the performance of our powerful and extremely reliable pumps.
IN THIS BROCHURE:
FLUX eccentric worm-drive pumps are designed
for a wide range of applications and are available
in two versions:
1. The robust bearing flange version is suited to continuous operation and is available with a three-phase electric motor or a compressed air motor.
2. A lightweight, easy-to-handle version for quick-change
applications is equipped with a planetary gear. GS
pump models are used with a FLUX commutator motor
or compressed air motor, and are ideal for conveying
=cP) viscosity.
substances with up to 30.000 mPas (^
The GS6 model is suitable for lower capacities, cover=cP) and
ing the viscosity range up to 80.000 mPas (^
available with a variety of motors.
NOTE
FLUX screw pumps are ideal for quickly and safely transferring thin to medium viscosity liquids with viscosities up
=cP). In contrast to the eccentric wormto 20.000 mPas (^
drive pumps they can be used against a closed discharge
side. FLUX screw pumps are available with either a threephase electric motor or a compressed air motor in a
variety of power ratings.
2
Eccentric worm-drive pumps approved
for use in hazardous areas Zone 0,
for transferring high flammability fluids
class IIA and IIB, see page 18.
2 –3
Introduction
Table of contents
4–5
Eccentric worm-drive pump Type F 550 S
version with bearing flange
6–7
Eccentric worm-drive pump Type F 550 GS
version with planetary gear
8–9
Eccentric worm-drive pump Type F 550 GS6
version with planetary gear;
By-pass valve
10 –11
Sanitary pump Type F 560 S
version with bearing flange
12 –13
Sanitary pump Type F 560 GS
version with planetary gear
14 –15
Eccentric worm-drive pumps
horizontal version
16 –17
Screw pump Type F 520 S
barrel pump version and
version with bearing flange
18 –19
Eccentric worm-drive pumps
approved for use in Zone 0;
Viscosity Chart
TABLE OF CONTENTS
FLUX
INNOVATORS IN FLOW TECHNOLOGY
3
FLUX ECCENTRIC WORM-DRIVE PUMPS TYPE F 550 S AND F 550 SB
VERSION WITH BEARING FLANGE
Recommended for transferring:
Thin to high viscosity, even pasty,
yet still flowing substances.
Three-phase motor
Typical applications:
Transferring viscous substances
from barrels and/or containers.
Feeding filling machines.
Compressed
air motor
Available drive motors:
Three-phase electric or
compressed air motors.
F 550 S-54/26
E CCENTRIC
WORM
Three-phase motors of 0,75 or 1,1 kW,
with a speed of 930 or 700 rpm.
For high viscosity, pasty substances a
motor of 1,1 kW is required with a
recommended speed of 700 rpm for vis=cP),
cosities exceeding 50.000 mPas (^
because of the low velocity of such products. A speed of 930 rpm may be used
if a follow-on plate would support the
continuous flow of the product to the
pump inlet.
=cP)
For viscosities up to 25.000 mPas (^
a motor of 0,75 kW and 930 rpm will be
sufficient.
On compressed air motors of 0,3 to
2,0 kW, the speed may be controlled by
a valve in the air supply line.
Seal types:
F 550 S with mechanical seal or
F 550 SB with stuffing box.
Pump
Type
F 550 S-50/21
F 550 SB-50/21
F 550 S-54/26
F 550 SB-54/26
Viscosity
mPas (^
=cP)
Curve
No.
1
1
1.000 – 2.000
2
20.000 –25.000
3
1
4
1.000 – 2.000
5
20.000 –25.000
6
F 550 S-50/21 AND F 550 SB-50/21
F 550 S-54/26 AND F 550 SB-54/26
H [bar]
Scope of supply:
A complete eccentric worm-drive pump
consists of: drive motor, pump, stator and
hose connection.
8
6
7
6
4
5
5
4
3
Values ± 10% obtained with a speed of 930 rpm
3
1
2
2
1
0
0
10
20
30
40
50
Q [l/min]
Delivery data for other viscosities on request.
4
ECCENTRIC WORM-DRIVE PUMPS VERSION WITH BEARING FLANGE, WITHOUT STATOR
Typ e
F 550 S-50/21
F 550 SB-50/21
F 550 S-54/26
F 550 SB-54/26
Delivery rate
max. 30 l/min
max. 30 l/min
max. 50 l/min
max. 50 l/min
Delivery head
max. 8 bars
max. 8 bars
max. 8 bars
max. 8 bars
Seal type
Mechanical seal in
ceramic oxide,
o-rings in FPM
Stuffing box in PTFE,
re-adjustable
Mechanical seal in
ceramic oxide,
o-rings in FPM
Stuffing box in PTFE,
re-adjustable
Material
Bearing flange in aluminium*; outer tube, shaft, eccentric worm in stainless steel 1.4571 (316 Ti)
Outer-Ø
50 mm
50 mm
54 mm
54 mm
Part No./Weight
Immersion length 700 mm
Immersion length 1000 mm
Immersion length 1200 mm
550 25 507/4,9 kg
550 25 510 /5,6 kg
550 25 512 /6,1 kg
550 25 530/5,9 kg
550 25 531/6,6 kg
550 25 532/7,1 kg
550 25 649/5,4 kg
550 25 652/6,1 kg
550 25 654/6,6 kg
550 25 694/6,4 kg
550 25 695/7,1 kg
550 25 696/7,6 kg
*Type F 550 SF with bearing flange in stainless steel on request.
STATORS FOR ECCENTRIC WORM-DRIVE PUMPS TYPE F 550 S AND F 550 SB
Material
Temperature
Remarks
Weight
Outer-Ø
Part No.
NBR white
(Perbunan)
max. 90 °C
particularly suitable for oils and greases,
also for food products
0,5 kg
0,6 kg
50 mm
54 mm
550 24 248
550 25 621
NBR black
(Perbunan)
max. 90 °C
particularly suitable for oils and greases,
not suitable for food products
0,5 kg
0,6 kg
50 mm
54 mm
550 24 244
550 25 620
CSM
(Hypalon)
max. 90 °C
paricularly suitable for corrosive products
not suitable for oils, greases nor food products
0,5 kg
0,6 kg
50 mm
54 mm
550 24 253
550 25 622
FPM
(Viton)
max. 150 °C
excellent chemical resistance to all different
0,5 kg
kind of products, not suitable for food products 0,6 kg
50 mm
54 mm
550 24 247
550 25 666
PTFE
(Teflon)
max. 150 °C
excellent chemical resistance,
particularly suitable for food products,
pharmaceuticals and cosmetics
50 mm
54 mm
550 24 256
550 25 625
0,6 kg
0,7 kg
Hose connection complete with union G 11/2 (BSP 11/2“ female) for pumps Type F 550 S and F 550 SB
DN 25 Part No. 959 04 002
DN 32 Part No. 959 04 003
DN 38 Part No. 959 04 004
DRIVE MOTORS FOR ECCENTRIC WORM-DRIVE PUMPS TYPE F 550 S AND F 550 SB
Three-phase motors 230/400 Volt, 50 Hz, jet-proof to IP 55
Capacity
Speed
Weight
Motor with
cable terminal box
Part No.
Motor with
motor protection switch
Part No.
0,75 kW
930 rpm
12,5 kg
001 01 006
001 01 046
0,75 kW
700 rpm
22,0 kg
001 01 506
001 01 546
1,1 kW
930 rpm
16,0 kg
001 01 007
001 01 047
1,1 kW
700 rpm
23,0 kg
001 01 507
001 01 547
Carrying handle
Weight 1,0 kg
Part No.
001 10 504
Three-phase motors 230/400 Volt, 50 Hz, explosion-proof to EEx e II T3
Capacity Speed
Weight
Motor
Part No.
Motor prot. switch
Range of setting
Weight Part No.
0,75 kW
930 rpm
15,0 kg
001 01 066
1,6 – 2,5 A
2,5 kg
936 06 118
0,75 kW
700 rpm
22,0 kg
001 01 566
1,6 – 2,5 A
2,5 kg
936 06 118
0,95 kW
700 rpm
22,0 kg
001 01 567
2,5 – 4,0 A
2,5 kg
936 06 119
1,1 kW
930 rpm
18,0 kg
001 01 067
2,5 – 4,0 A
2,5 kg
936 06 119
Carrying handle
for explosionproof motors, with
support for motor
protection switch
Weight 1,5 kg
Part No.
001 10 567
Compressed air motors, max. operating pressure 7 bars
Type
Capacity
Speed at 6 bars
Thread on air inlet
3/8 (BSP 3/8“
Weight
Part No.
FPM 4 Ex
0,6 kW
1000 rpm
G
female)
5,0 kg
001 04 000
FPM 6 Ex
1,2 kW
1000 rpm
G 1/2 (BSP 1/2“ female)
7,0 kg
001 04 014
female) 10,0 kg
001 04 002
FPM 8 Ex
!
2,0 kW
1000 rpm
G
1/2 (BSP 1/2“
ECCENTRIC WORM-DRIVE PUMPS TYPE F 550 S AND F 550 SB
FLUX
Carrying handle
Weight 1,0 kg
Part No. 001 10 520
Eccentric worm-drive pumps approved for use in hazardous area Zone 0, see page 18.
5
FLUX ECCENTRIC WORM-DRIVE PUMPS TYPE F 550 GS AND F 550 GSB
VERSION WITH PLANETARY GEAR
F 416 Ex
F 416-2 Ex
Recommended for transferring:
Thin to medium viscosity liquids
up to a maximum viscosity of
=cP).
30.0000 mPas (^
Typical applications:
Liquid transfer from barrels and/or
containers.
The pumps type F 550 GS and F 550
GSB are particularly lightweight and
easy-to-handle making them extremely
versatile pumps.
The lightest model has a weight of 5,5 kg
only. The weight of the complete pump
depends on the immersion length and
motor assembly.
F 417 EL
F 457
Available drive motors:
Commutator motors or
compressed air motors.
F 458
An infinitely variable speed variator –
also available on explosion-proof
models – allows the operator to set
pump capacity to specific delivery
requirements.
F 550 GS-50/21
F 460 Ex
Seal types:
F 550 GS with mechanical seal or
F 550 GSB with stuffing box.
Scope of supply:
A complete eccentric worm-drive pump
consists of: drive motor, pump, stator and
hose connection.
Curve
No.
F 550 GS-50/21 AND F 550 GSB-50/21
8
1
1
2.000 – 3.000
2
12.000 –15.000
3
6
1
4
5
2.000 – 3.000
5
4
7
15.000 – 20.000
6
3
4
F 416 Ex/F 416-1Ex
1
F 416-2 Ex
2.000 – 3.000
F 457
F 457 EL
15.000 – 25.000
7
F 417/ F 417 EL
F 458/F 458 EL
F 460 Ex
F 460 Ex EL
F 458-1
F 460-1 Ex
8
9
7
8
6
7
3
6
5
5
5
8
4
3
2
4
8
2
3
1
2
9
7
9
1
2
1
1
6
0
0
Values ± 10%
F 550 GS-54/26 AND F 550 GSB-54/26
H [bar]
Viscosity
mPas (^
=cP)
H [bar]
Pump
Type
5
10
15
0
20
25
30
35
Q [l/min]
0
10
20
30
40
50
Q [l/min]
Delivery data for other viscosities on request.
6
ECCENTRIC WORM-DRIVE PUMPS VERSION WITH PLANETARY GEAR, WITHOUT STATOR
Type
F 550 GS-50/21
F 550 GSB-50/21
F 550 GS-54/26
F 550 GSB-54/26
Delivery rate
max.30 l/min
max. 30 l/min
max. 50 l/min
max. 50 l/min
Delivery head
max. 8 bars
max. 8 bars
max. 8 bars
max. 8 bars
Seal type
Mechanical seal in
ceramic oxide,
o-rings in FPM
Stuffing box in PTFE,
re-adjustable
Mechanical seal in
ceramic oxide,
o-rings in FPM
Stuffing box in PTFE,
re-adjustable
Material
Outer tube, shaft, eccentric worm in stainless steel 1.4571 (316 Ti)
Outer-Ø
50 mm
50 mm
54 mm
Part No./Weight
Immersion length 700 mm
Immersion length 1000 mm
Immersion length 1200 mm
54 mm
550 24 807/4,3 kg
550 24 810/5,0 kg
550 24 812/5,5 kg
550 24 838/4,3 kg
550 24 839/5,0 kg
550 24 840/5,5 kg
550 25 675/4,8 kg
550 25 676/5,5 kg
550 25 677/6,0 kg
550 25 697/4,8 kg
550 25 698/5,5 kg
550 25 699/6,0 kg
STATORS FOR ECCENTRIC WORM-DRIVE PUMPS TYPE F 550 GS AND F 550 GSB
Material
Temperature
Remarks
Weight
Outer-Ø
Part No.
NBR white
(Perbunan)
max. 90 °C
particularly suitable for oils and greases,
also for food products
0,5 kg
0,6 kg
50 mm
54 mm
550 24 248
550 25 621
NBR black
(Perbunan)
max. 90 °C
particularly suitable for oils and greases,
not suitable for food products
0,5 kg
0,6 kg
50 mm
54 mm
550 24 244
550 25 620
CSM
(Hypalon)
max. 90 °C
particularly suitable for corrosive products,
not suitable for oils, greases nor food products
0,5 kg
0,6 kg
50 mm
54 mm
550 25 253
550 25 622
FPM
(Viton)
max. 150 °C
excellent chemical resistance to all different
0,5 kg
kind of products, not suitable for food products 0,6 kg
50 mm
54 mm
550 24 247
550 25 666
PTFE
(Teflon)
max. 150 °C
excellent chemical resistance,
particularly suitable for food products,
pharmaceuticals and cosmetics
50 mm
54 mm
550 24 256
550 25 625
0,6 kg
0,7 kg
Hose connection complete with union G 11/2 (BSP 11/2“ female) for pumps Type F 550 GS and F 550 GSB
DN 25 Part No. 959 04 002
DN 32 Part No. 959 04 003
DN 38 Part No. 959 04 004
COMMUTATOR AND COMPRESSED AIR MOTORS FOR PUMPS TYPE F 550 GS AND F 550 GSB
Commutator motors 230 Volt, 50 Hz (other voltages and/or frequencies on request)
Type
Capacity
protected to
max. viscosity
Weight
F 417
450 Watt
IP 24
2,4 kg
–
417 01 004
F 417 EL
450 Watt
IP 24
=cP)
10.000 mPas (^
^cP)
10.000 mPas (=
2,4 kg
–
417 01 012
F 457
800 Watt
IP 24
F 457 EL
800 Watt
IP 24
F 458
460 Watt
IP 55
F 458 EL
460 Watt
IP 55
F 458-1
700 Watt
IP 55
F 460 Ex
460 Watt
II 2G EEx de IIC T6
F 460 Ex EL
460 Watt
II 2G EEx de IIC T6
F 460-1 Ex
700 Watt
II 2G EEx de IIC T6
Part No.
with NVR*
Part No.
without NVR*
=cP)
30.000 mPas (^
^
30.000 mPas (=cP)
4,0 kg
457 01 005
4,0 kg
457 01 003
457 01 041
=cP)
12.000 mPas (^
=cP)
12.000 mPas (^
5,3 kg
458 00 006
458 00 001
5,3 kg
458 00 027
=cP)
25.000 mPas (^
^cP)
12.000 mPas (=
6,1 kg
458 01 004
458 01 001
5,3 kg
460 00 006
460 00 001
=cP)
12.000 mPas (^
^cP)
25.000 mPas (=
5,3 kg
460 00 028
6,1 kg
460 01 004
457 01 002
–
–
460 01 001
*NVR = no-volt release
Compressed air motors, explosion-proof, operating pressure max. 6 bar, thread on air inlet G 1/4 (BSP 1/4“ female)
Type
Capacity
Valve type
max. viscosity
Weight
Part No.
1,4 kg
416 00 100
0,9 kg
416 00 020
1,0 kg
416 00 030
F 416 Ex
470 Watt
trigger operated valve
F 416-1 Ex
470 Watt
without valve
=cP)
30.000 mPas (^
^cP)
30.000 mPas (=
ball valve
=cP)
30.000 mPas (^
F 416-2 Ex
!
470 Watt
ECCENTRIC WORM-DRIVE PUMPS TYPE F 550 GS AND F 550 GSB
FLUX
Eccentric worm-drive pumps approved for use in Zone 0, see page 18.
7
FLUX ECCENTRIC WORM-DRIVE PUMP TYPE F 550 GS6
VERSION WITH PLANETARY GEAR
Recommended for transferring:
Thin to high viscosity media
up to a maximum viscosity of
=cP).
80.000 mPas (^
F 403
Typical applications:
Very lightweight and easy-to-handle
pump designed for lower capacities.
Extremely smooth transfer operations
with a speed of 210 or 420 rpm only.
Available drive motors:
Single-phase AC motors with capacitor
or three-phase motors.
Seal types:
With mechanical seal or, on request,
with stuffing box.
F 550 GS6-50/21
Scope of supply:
A complete eccentric worm-drive pump
consists of: drive motor, pump, stator
and hose connection.
Speed
F 550 GS6-50/21
F 550 GS6-54/26
Motor 1450 rpm
Pump 210 rpm
1
Motor 2850 rpm
Pump 420 rpm
2
Motor 1450 rpm
Pump 210 rpm
3
Motor 2850 rpm
Pump 420 rpm
4
Viscosity: 25.000 mPas (^
=cP)
Values ± 10%
Curve
No.
F 550 GS6-50/21 AND
F 550 GS6-54/26
H [bar]
Pump
Type
8
7
6
1
5
3
2
4
4
3
2
1
0
0
5
10
15
20
25
Q [l/min]
Delivery data for other viscosities on request.
8
ECCENTRIC WORM-DRIVE PUMP VERSION WITH PLANETARY GEAR, WITHOUT STATOR
Typ e
F 550 GS6-50/21
F 550 GS6-54/26
Delivery rate
max. 13 l/min
max. 20 l/min
Delivery head
max. 8 bars
max. 8 bar
Seal type
Mechanical Seal* in ceramic oxide, o-rings in FPM
Material
Outer tube, shaft, eccentric worm in stainless steel 1.4571 (316 Ti)
Outer-Ø
50 mm
54 mm
Part No./Weight
Immersion length 700 mm
Immersion length 1000 mm
Immersion length 1200 mm
550 23 200/4,3 kg
550 23 201/5,0 kg
550 23 202/5,5 kg
550 23 300/4,8 kg
550 23 301/5,5 kg
550 23 302/6,0 kg
*version with stuffing box on request.
STATORS FOR ECCENTRIC WORM-DDRIVE PUMPS TYPE F 550 GS6
Material
Temperature
Remarks
Weight
Outer-Ø
Part No.
NBR white
(Perbunan)
max. 90 °C
particularly suitable for oils and greases,
also for food products
0,5 kg
0,6 kg
50 mm
54 mm
550 24 248
550 25 621
NBR black
(Perbunan)
max. 90 °C
particularly suitable for oils and greases,
not suitable for food products
0,5 kg
0,6 kg
50 mm
54 mm
550 24 244
550 25 620
CSM
(Hypalon)
max. 90 °C
particularly suitable for corrosive products,
not suitable for oils, greases nor food products
0,5 kg
0,6 kg
50 mm
54 mm
550 24 253
550 25 622
FPM
(Viton)
max. 150 °C
excellent chemical resistance to all different
0,5 kg
kind of products, not suitable for food products 0,6 kg
50 mm
54 mm
550 24 247
550 25 666
PTFE
(Teflon)
max. 150 °C
excellent chemical resistance,
particularly suitable for food products,
pharmaceuticals and cosmetics
50 mm
54 mm
550 24 256
550 25 625
0,6 kg
0,7 kg
Hose connection complete with union G 11/2 (BSP 11/2“ female) for pumps Type F 550 GS6
DN 25 Part No. 959 04 002
DN 32 Part No. 959 04 003
DN 38 Part No. 959 04 004
DRIVE MOTORS FOR ECCENTRIC WORM-DRIVE PUMPS TYPE F 550 GS6
Single-phase AC motors with capacitor,
230 Volt, 50 Hz, jet-proof to IP 55, with motor protection switch, 5 m cable and plug
Type
Capacity
Speed
max. viscosity
Weight
Part No.
F 403/4
0,30 kW
1450 rpm
8,0 kg
403 01 014
F 403/2
0,50 kW
2850 rpm
=cP)
40.000 mPas (^
=cP)
30.000 mPas (^
8,0 kg
403 01 015
F 403/4
0,55 kW
1450 rpm
=cP)
80.000 mPas (^
11,0 kg
403 01 016
Carrying handle
Weight 1,0 kg
Part No.
001 10 568
Three-phase motors 230/400 Volt, 50 Hz, jet-proof to IP 55, with motor protection switch, without cable
Type
Capacity
Speed
max. viscosity
Weight
Part No.
F 403/4
0,55 kW
1450 rpm
8,0 kg
403 01 011
F 403/2
0,75 kW
2850 rpm
=cP)
80.000 mPas (^
=cP)
50.000 mPas (^
8,0 kg
403 01 013
Carrying handle
Weight 1,0 kg
Part No.
001 10 568
BY-PASS VALVE, THREAD ON INLET G 11/2 (BSP 11/2“ FEMALE) –
THREAD ON OUTLET G 11/2 A (BSP 11/2“MALE)
By-pass valve
Material
Pressure
Discharge Connection
Weight
Part No.
Stainless steel 1.4571 (316 Ti) 4 – 6 bars
Flow back tube
3,1 kg
001 18 027
Stainless steel 1.4571 (316 Ti) 4 – 6 bars
Hose connector DN 13
2,7 kg
001 18 029
Brass
2 – 8 bars
Flow back tube
2,3 kg
001 18 026
Brass
2 – 8 bars
Hose connector DN 13
1,9 kg
001 18 028
ECCENTRIC WORM-DRIVE PUMP TYPE F 550 GS6 / BY-PASS VALVE
FLUX
9
FLUX SANITARY PUMP F 560 S
VERSION WITH BEARING FLANGE
Recommended for transferring:
Thin to high viscosity, even pasty,
yet still flowing substances.
Three-phase motor
Typical applications:
A pump designed to meet the specific
requirements of the food, cosmetics and
pharmaceutical industries.
Compressed
air motor
Available drive motors:
Three-phase electric motors or
compressed air motors.
F 560 S3A-50/21
E CCENTRIC
WORM
The F 560 S can be stripped down in no
time for cleaning and/or sterilisation.
Different seal types are available and
easily exchangeable. The stator housing
comprises a safety bar to protect containers and to allow transfer operations
from plastic inliners.
The F 560 S pump is available in special
version with 3A approval:
ground and polished, equipped with
a closed mecanical seal in stainless steel
and sliding faces in silicium carbide
(SiC).
Seal type:
Mechanical seal
Scope of supply:
A complete sanitary pump consists of:
drive motor, pump, stator and hose
connection.
F 560 S1-50/21
F 560 S2-50/21
F 560 S3A-50/21
F 560 S1-54/26
F 560 S2-54/26
F 560 S3A-54/26
Viscosity
mPas (^
=cP)
Curve
No.
1
1
1.000 – 2.000
2
20.000 –25.000
3
1
4
1.000 – 2.000
5
20.000 –25.000
6
F 560 S1, S2, S3A-50/21 AND
F 560 S1, S2, S3A-54/26
H [bar]
Pump
Type
8
6
7
6
4
5
5
4
3
Values ± 10% obtained with a speed of 930 rpm
3
1
2
2
1
!
10
Eccentric worm-drive pumps approved
for use in Zone 0, see page 18.
0
0
10
20
30
40
50
Q [l/min]
Delivery data for other viscosities on request.
SANITARY PUMPS
Eccentric worm-drive pump, version with bearing flange in stainless steel, without stator
Type
F 560 S1-50/21
F 560 S2-50/21
1/6
Thread on outlet
Rd 58 x
G
Delivery rate
max. 30 l/min
Delivery head
max. 8 bars
Seal type
11/2
F 560 S1-54/26
A
Rd 58 x
F 560 S2-54/26
1/6
G 11/2 A
max. 30 l/min
max. 50 l/min
max. 50 l/min
max. 8 bars
max. 8 bars
max. 8 bars
Mechanical seal in SiC, o-rings in FPM (food-grade)
Material
Bearing flange, outer tube, shaft, eccentric worm in stainless steel 1.4571 (316 Ti)
Outer-Ø
50 mm
50 mm
54 mm
Part No./Weight
Immersion length 700 mm
Immersion length 1000 mm
Immersion length 1200 mm
54 mm
560 20 007/5,8 kg
560 20 010/6,5 kg
560 20 012/7,0 kg
560 20 107/5,8 kg
560 20 110/6,5 kg
560 20 112/7,0 kg
560 22 007/6,3 kg
560 22 010/7,0 kg
560 22 012/7,5 kg
560 22 107/6,3 kg
560 22 110/7,0 kg
560 22 112/7,5 kg
Eccentric worm-drive pump in 3A-version, with bearing flange in stainless steel, outlet Clamp 2“ without stator
Type
F 560 S3A-50/21
F 560 S3A-54/26
Delivery rate
max. 30 l/min
max. 50 l/min
Delivery head
max. 8 bars
max 8 bars
Seal type
Closed mechanical seal in stainless steel, sealing faces SiC, o-rings in FPM (food-grade)
Material
Bearing flange, outer tube, shaft, eccentric worm in stainless steel 1.4571 (316 Ti),
ground and polished according to 3A standards
Outer-Ø
50 mm
54 mm
Part No./Weight
Immersion length 700 mm
Immersion length 1000 mm
Immersion length 1200 mm
560 20 607/5,8 kg
560 20 610/6,5 kg
560 20 612/7,0 kg
560 22 607/6,3 kg
560 22 610/7,0 kg
560 22 612/7,5 kg
SANITARY PUMPS TYPE F 560 S
FLUX
STATOR IN PTFE, STATOR HOUSING IN STAINLESS STEEL WITH SAFTY BAR
Type F 560 S1 and F 560 S2
Type F 560 S3A
outer-Ø 50 mm Part No. 560 21 900 Weight 0,6 kg
outer-Ø 50 mm Part No. 560 21 901 Weight 0,6 kg
outer-Ø 54 mm Part No. 560 23 900 Weight 0,7 kg
outer-Ø 54 mm Part No. 560 23 901 Weight 0,7 kg
Hose connection complete with union nut or Clamp for Pumps Type F 560 S1, F 560 S2 and F 560 S3A
Union nut Rd 58 x 1/6
DN 25 Part No. 959 04 115
DN 32 Part No. 959 04 134
DN 38 Part No. 959 04 130
Union nut G 11/2
DN 25 Part No. 959 04 002
DN 32 Part No. 959 04 003
DN 38 Part No. 959 04 004
Clamp 2“
–
DN 38 Part No. 959 04 109
–
DRIVE MOTORS FOR PUMPS TYPE F 560 S1, F 560 S2 AND F 560 S3A
Three-phase motors 230/400 Volt, 50 Hz, jet-proof to IP 55, painting red/black*
Capacity
Speed
Weight
Motor with
cable terminal box
Part No.
Motor with
motor protection switch
Part No.
0,75 kW
930 rpm
12,5 kg
001 01 006
001 01 046
0,75 kW
700 rpm
22,0 kg
001 01 506
001 01 546
1,1 kW
930 rpm
16,0 kg
001 01 007
001 01 047
1,1 kW
700 rpm
23,0 kg
001 01 507
001 01 547
Carrying handle
Weight 1,0 kg
Part No.
001 10 504
Three-phase motors 230/400 Volt, 50 Hz, explosion-proof to EEx e II T3, painting red/black*
Capacity Speed Weight Motor
Part No.
Motor protection switch
Range of setting
Weight
Part No.
0,75 kW
930 rpm 15,0 kg 001 01 066
1,6 – 2,5 A
2,5 kg
936 06 118
0,75 kW
700 rpm 22,0 kg 001 01 566
1,6 – 2,5 A
2,5 kg
936 06 118
0,95 kW
700 rpm 22,0 kg 001 01 567
2,5 – 4,0 A
2,5 kg
936 06 119
1,1 kW
930 rpm 18,0 kg 001 01 067
2,5 – 4,0 A
2,5 kg
936 06 119
Carrying handle
for explosion-proof
motors with support for motor protection switch
Weight 1,5 kg
Part No.
001 10 567
Compressed air motors, max. operating pressure 7 bars, painting red/black*
Type
Capacity
Speed at 6 bars
Thread on air inlet
3/8 (BSP 3/8“
Weight
Part No.
FPM 4 Ex
0,6 kW
1000 rpm
G
female)
5,0 kg
001 04 000
FPM 6 Ex
1,2 kW
1000 rpm
G 1/2 (BSP 1/2“ female)
7,0 kg
001 04 014
FPM 8 Ex
2,0 kW
1000 rpm
G
1/2 (BSP 1/2“
female)
10,0 kg
Carrying handle
Weight 1,0 kg
Part No. 001 10 520
001 04 002
*special painting white on request.
11
FLUX SANITARY PUMP TYPE F 560 GS
VERSION WITH PLANETARY GEAR
F 416 Ex
F 416-2 Ex
Recommended for transferring:
Thin to medium viscosity liquids
up to a maximum viscosity of
=cP).
30.000 mPas (^
Typical applications:
Very lightweight and easy-to-handle
pump for use in the food, cosmetics and
pharmaceutical industries. The F 560 GS
can be stripped down in no time for cleaning and/or sterilisation. Different seal
types are available and easily exchangeable. The stator housing comprises a
safety bar to protect containers and to
allow transfer out of plastic inliners.
The F 560 GS is available in special version with 3A approval: ground, polished,
with a closed mechanical seal in stainless
steel and sliding faces in silicium carbide
(SiC).
F 417 EL
F 457
F 458
Available drive motors:
Electric commutator motors or
compressed air motors.
An infinite variable speed variator
allows the operator to set pump
capacity to specific delivery
requirements.
F 560 GS2-50/21
F 460 Ex
Seal type: Mechanical seal
Scope of supply:
A complete sanitary pump consists of:
drive motor, pump, stator and hose
connection.
F 560 GS1, GS2, GS3A-50/21
1
2.000 – 3.000
2
12.000 –15.000
3
6
1
4
5
2.000 – 3.000
5
4
7
15.000 – 20.000
6
3
4
F 416 Ex/F 416-1Ex
1
F 416-2 Ex
2.000 – 3.000
F 457
F 457 EL
15.000 – 25.000
7
F 458-1
F 460-1 Ex
Values ± 10%
!
8
9
F 560 GS1, GS2, GS3A-54/26
8
1
F 417/ F 417 EL
F 458/F 458 EL
F 460 Ex
F 460 Ex EL
12
Curve
No.
H [bar]
Viscosity
mPas (^
=cP)
H [bar]
Motor
Type
7
8
6
7
3
6
5
5
5
8
4
3
2
4
8
2
3
1
2
9
7
9
1
2
1
1
6
0
0
5
10
15
0
20
25
Eccentric worm-drive pumps approved for use in Zone 0 see page 18.
30
35
Q [l/min]
0
10
20
30
40
50
Q [l/min]
Delivery data for other viscosities on request.
SANITARY PUMPS TYPE F 560 GS
Eccentric worm-drive pump with planetary gear, suitable up to 30.000 mPa (^
=cP), without stator
Type
F 560 GS1-50/21
F 560 GS2-50/21
1/6
G 11/2
F 560 GS1-54/26
A
Rd 58 x
1/6
F 560 GS2-54/26
G 11/2 A
Outlet
Rd 58 x
Delivery rate
max. 30 l/min
max. 30 l/min
max. 50 l/min
max. 50 l/min
Delivery head
max. 8 bars
max. 8 bars
max. 8 bars
max. 8 bars
Seal type
Mechanical seal in SiC, o-rings in FPM (food-grade)
Material
Bearing flange, outer tube, shaft eccentric worm in stainless steel 1.4571 (316 Ti)
Outer-Ø
50 mm
50 mm
54 mm
54 mm
Part No./Weight
Immersion length 700 mm
Immersion length 1000 mm
Immersion length 1200 mm
560 20 307/5,4 kg
560 20 310/5,7 kg
560 20 312/6,2 kg
560 20 407/5,4 kg
560 20 410/5,7 kg
560 20 412/6,2 kg
560 22 307/5,8 kg
560 22 310/6,2 kg
560 22 312/6,7 kg
560 22 407/5,8 kg
560 22 410/6,2 kg
560 22 412/6,7 kg
Eccentric worm-drive pump, 3A-version, with bearing flange in stainless steel,
outlet Clamp 2“, without stator
Type
F 560 GS3A-50/21
F 560 GS3A-54/26
Delivery rate
max. 30 l/min
max. 50 l/min
Delivery head
max. 8 bar
max 8 bar
Seal type
Closed mechanical seal in stainless steel, sliding faces SiC, o-rings in FPM (food-grade)
Material
Bearing flange, outer tube, shaft, eccentric worm in stainless steel 1.4571 (316 Ti),
ground and polished according to 3A standards
Outer-Ø
50 mm
54 mm
Part No./Weight
Immersion length 700 mm
Immersion length 1000 mm
Immersion length 1200 mm
560 20 707/5,8 kg
560 20 710/6,5 kg
560 20 712/7,0 kg
560 22 707/6,3 kg
560 22 710/7,0 kg
560 22 712/7,5 kg
SANITARY PUMPS TYPE F 560 GS
FLUX
STATOR IN PTFE, STATOR HOUSING IN STAINLESS STEEL WITH SAFETY BAR
Type F 560 GS1 and F 560 GS2
Type F 560 GS3A
Outer-Ø 50 mm Part No. 560 21 900 Weight 0,6 kg
Outer-Ø 50 mm Part No. 560 21 901 Weight 0,6 kg
Outer-Ø 54 mm Part No. 560 23 900 Weightt 0,7 kg
Outer-Ø 54 mm Part No. 560 23 901 Weight 0,7 kg
Hose connection complete with union nut or Clamp for pumps Type F 560 GS1, F 560 GS2 and F 560 GS3A
Union nut Rd 58 x 1/6
Union nut G
11/2
DN 25 Part No. 959 04 115
DN 32 Part No. 959 04 134
DN 38 Part No. 959 04 130
DN 25 Part No. 959 04 002
DN 32 Part No. 959 04 003
DN 38 Part No. 959 04 004
Clamp 2“
–
DN 38 Part No. 959 04 109
–
COMMUTATOR MOTORS AND COMPRESSED AIR MOTORS FOR PUMPS F 560 GS1, F 560 GS2, F 560 GS3A
Commutator motors 230 Volt, 50 Hz (other voltages and/or frequencies on request)
Type
Capacity
protected to
max. viscosity
Weight
F 417
450 Watt
IP 24
2,4 kg
–
417 01 004
F 417 EL
450 Watt
IP 24
=cP)
10.000 mPas (^
^cP)
10.000 mPas (=
2,4 kg
–
417 01 012
F 457
800 Watt
IP 24
F 457 EL
800 Watt
IP 24
F 458
460 Watt
IP 55
F 458 EL
460 Watt
IP 55
F 458-1
700 Watt
IP 55
F 460 Ex
460 Watt
II 2G EEx de IIC T6
F 460 Ex EL
460 Watt
II 2G EEx de IIC T6
F 460-1 Ex
700 Watt
II 2G EEx de IIC T6
Part No.
With NRV*
Part No.
without NRV*
=cP)
30.000 mPas (^
^cP)
30.000 mPas (=
4,0 kg
457 01 005
457 01 002
4,0 kg
457 01 003
457 01 041
=cP)
12.000 mPas (^
=cP)
12.000 mPas (^
5,3 kg
458 00 006
458 00 001
5,3 kg
458 00 027
=cP)
25.000 mPas (^
^
12.000 mPas (=cP)
6,1 kg
458 01 004
458 01 001
5,3 kg
460 00 006
460 00 001
=cP)
12.000 mPas (^
^cP)
25.000 mPas (=
5,3 kg
460 00 028
6,1 kg
460 01 004
–
–
460 01 001
*NRV = no-volt release
Compressed air motors, explosion-proof, max. operating pressure 6 bars, female thread G 1/4 “ for compressed air
Type
Capacity
Valve type
max. viscosity
Weight
Part No.
1,4 kg
416 00 100
0,9 kg
416 00 020
1,0 kg
416 00 030
F 416 Ex
470 Watt
trigger operated valve
F 416-1 Ex
470 Watt
without valve
=cP)
30.000 mPas (^
^cP)
30.000 mPas (=
ball valve
=cP)
30.000 mPas (^
F 416-2 Ex
470 Watt
13
FLUX ECCENTRIC WORM-DRIVE PUMPS F 550 S TR
HORIZONTAL INSTALLATION ON A BASE PLATE, VERSION WITH BEARING FLANGE
Recommended for transferring:
Thin to high viscosity, even pasty,
yet still flowing substances.
F 550 S-54/26 TR
Typical applications:
The F 550 S TR is designed for horizontal
use. A base plate facilitates the installation with a three-phase electric motor.
The pump is available
in two versions:
F 550 S TR with bearing flange in
aluminium and flange connection between outer tube and stator housing.
F 550 SF TR with bearing flange in
stainless steel and clamp connection
between outer tube and stator housing
as well as on pump inlet and outlet.
F 550 SF-54/26 TR
Both versions comprise a stator
in PTFE.
Available drive motors:
Three-phase electric motors.
Seal type:
Mechanical seal
Scope of supply:
A complete horizontal pump consists of:
drive motor, pump and stator, hose
connection on inlet and outlet, base plate.
F 550 S-54/26 TR
F 550 SF-54/26 TR
Viscosity
mPas (^
=cP)
Curve
Nr.
1
1
1.000 – 2.000
2
20.000 –25.000
3
Values ± 10% obtained with a speed of 930 rpm
F 550 S-54/26 TR AND
F 550 SF-54/26 TR
H [bar]
Pumps
Type
8
7
2
6
5
4
3
3
1
2
1
0
0
5
10
15
20
25
30
35
40
45 50
Q [l/min]
Delivery data for other viscosities on request.
14
ECCENTRIC WORM-DRIVE PUMPS IN HORIZONTAL VERSION
Eccentric worm-drive pump type F550 S TR with bearing flange in aluminium, flange connection between
outer tube and stator housing, thread on outlet G11/2 A (BSP 11/2“ male)
Type
F 550 S-54/26 TR
Delivery rate
max. 50 l/min
Delivery head
max. 8 bars
Seal type
Mechanical seal in ceramic oxide, o-rings in FPM
Material
Bearing flange in aluminium; outer tube, shaft, eccentric worm in stainless steel 1.4571 (316 Ti)
Weight
5,5 kg
Part No.
550 25 503
Base plate
Part No. 001 15 002/5,7 kg
Eccentric worm-drive pump type F550 SF TR with bearing flange in stainless steel clamp connection between
outer tube and stator housing, inlet and outlet Clamp 2“, with PTFE stator
Typ e
F 550 SF-54/26 TR
Delivery rate
max. 50 l/min
Delivery head
max. 8 bars
Seal type
Mechanical seal in SiC, o-rings in FPM (food grade)
Material
Bearing flange, outer tube, shaft, eccentric worm in stainless steel 1.4571 (316 Ti)
Weight
6,1 kg
Part No.
550 25 692
Base plate
Part No. 001 15 002/5,7 kg
Hose connection complete with union nut or clamp for pumps type F 550 S TR and F 550 SF TR
Union nut G 11/2“
DN 25 Part No. 959 04 002
Union nut G 2
–
Clamp 2“
–
DN 32 Part No. 959 04 003
DN 38 Part No. 959 04 004
DN 32 Part No. 959 04 059
DN 38 Part No. 959 04 060
–
DN 38 Part No. 959 04 109
DRIVE MOTORS FOR ECCENTRIC WORM-DRIVE PUMP TYPE E F 550 S-54/26 TR AND F 550 SF-54/26 TR
Three-phase motors 230/400 Volt, 50 Hz, jet-proof to IP 55, with cable terminal box, without cable
Capacity
Speed
Weight
Part No.
0,75 kW
930 rpm
12,5 kg
001 01 046
0,75 kW
700 rpm
22,0 kg
001 01 546
1,1 kW
930 rpm
16,0 kg
001 01 047
1,1 kW
700 rpm
23,0 kg
001 01 547
ECCENTRIC WORM-DRIVE PUMPS TYPE F 550 S TR
FLUX
15
FLUX SCREW PUMP TYPE F 520 S
IN BARREL PUMP VERSION AND IN VERSION WITH BEARING FLANGE
Three-phase motor for
F 520 S-50/45
Recommended for transferring:
thin to medium viscosity
liquids up to a max. viscosity
=cP).
of 20.000 mPas (^
AC motor F 403
for F 520 S-41/37
Typical applications:
Version with bearing flange – robust
pump design suitable for viscosities
=cP).
up to 20.000 mPas (^
The screw pumps type F 520 S – in
contrast to the F 550 and F 560 series
pumps are not a positive displacement
pump design.This allows pumping
operations against a closed outlet.
The pump type F 520 S is also available
in a special version with 3A approval:
ground, polished, equipped with a closed mechanical seal in stainless steel,
slidicing faces in silicium carbide (SiC).
F 520 S-50/45
S CREW
Available drive motors:
Three-phase electric motors or
compressed air motors.
Seal types:
Mechanical seal
F 520 S-50/45
F 520 S3A-50/45
F 520 S-41/37
Viscosity
Curve
mPas (^
=cP) Nr.
1.200
1
2.500
2
20.000
3
600
4
2.000
5
F 520 S/S3A-50/45
F 520 S-50/45, F 520 S3A-50/45
AND F 520 S-41/37
Viskosität [mPas]
20.000
3,0
H [bar]
Pumps
Type
F 520 S-41/37
Scope of supply:
A complete screw pump consists of:
drive motor, pump and hose connection.
3,0
2,5
10.000
2,2
2,0
3
1,5
5.000
1,5
Values ± 10% obtained with a speed of 2850 rpm
5
2
1,0
1.000
500
0,75
Motorleistung in kW
4
1
0,5
0,0
0
5
10
15
20
25
30
35
40
Q [l/min]
Delivery data for other viscosities on request.
16
SCREW PUMP, BARREL PUMP VERSION AND VERSION WITH BEARING FLANGE
Type
F 520 S-41/37
F 520 S-50/45
Version
barrel pump
with bearing flange
max. Viscosity
=cP)
2.000 mPas (^
=cP)
20.000 mPas (^
Delivery rate
max. 20 l/min
max. 35 l/min
Delivery head
max. 2 bars
max. 3 bars
Seal type
Mechanical seal in ceramic oxide, o-rings in FPM
Material
Stainless steel 1.4571 (316 Ti)
bearing flange in aluminium;
outer tube and shaft in stainless steel 1.4571 (316 Ti)
Screw
Polyethylene (PE)
Stainless steel 1.4571 (316 Ti)
outer-Ø
41 mm
50 mm
Part No./Weight
Immersion length 700 mm 520 20 007/2,4 kg
Immersion length 1000 mm 520 20 010/3,0 kg
Immersion length 1200 mm 520 20 012/3,6 kg
520 23 003/5,5 kg
520 23 004/6,6 kg
520 23 022/7,4 kg
DRIVE MOTOR FOR SCREW PUMP TYPE F 520 S-41/37
Single-phase AC motor with capacitor, 230 Volt, 50 Hz, jet-proof to IP 55, speed 2850 rpm,
with motor protection switch, 5m cable and plug
Type
Capacity
Weight
Part No.
F 403/2
0,75 kW
8,0 kg
403 01 015
Carrying handle
Weight 1,0 kg
Part No.
001 10 568
SCREW PUMP TYPE F 520 S
FLUX
SANITARY PUMP, SCREW PUMP TO 3A-STANDARDS
with bearing flange in stainless steel, outlet Clamp 2“
Type
F 520 S3A-50/45
Version
max. Viscosity
with bearing flange
=cP)
20.000 mPas (^
Delivery rate
max. 35 l/min
Delivery head
max. 3 bars
Seal type
Closed mechanical seal in stainless steel, sliding faces in SiC, o-rings in FPM (food-grade)
Material
Bearing flange, outer tube, shaft in stainless steel 1.4571 (316 Ti), ground and polished according to
3A standards; screw in PTFE
Outer-Ø
50 mm
Part No./Weight
Immersion length 700 mm
Immersion length 1000 mm
Immersion length 1200 mm
520 23 030/6,4 kg
520 23 031/7,5 kg
520 23 032/8,3 kg
Hose Connection complete with union nut or clamp for screw pumps type F 520 S and F 520 S3A
F 520 S-41/37
DN 25 Part No. 959 04 041
DN 32 Part No. 959 04 042
F 520 S-50/45
DN 25 Part No. 959 04 002
DN 32 Part No. 959 04 003
F 520 S3A-50/45
–
–
DN 38 Part No. 959 04 004
DN 38 Part No. 959 04 109
–
DRIVE MOTORS FOR SCREW PUMPS TYPE F 520 S-50/45 AND F520 S3A-50/45*
Three-phase motors 230/400 Volt or 400 Volt at 3 kW, 50 Hz, jet-proof to IP 55, speed 2850 rpm, without cable
Capacity
Weight
Motor with
cable terminal box
Part No.
Motor with
motor protection switch
Part No.
0,75 kW
7,5 kg
001 00 006
001 00 046
1,5 kW
12,0 kg
001 00 008
001 00 048
2,2 kW
15,0 kg
001 00 009
001 00 049
3,0 kW
20,0 kg
001 00 010
001 00 050
Carrying handle
Weight 1,0 kg
Part No.
001 10 504
*special painting white on request.
17
ZONE 0
ECCENTRICC WORM-DRIVE PUMPS APPROVED FOR USE IN HAZARDOUS AREAS ZONE 0,
FOR TRANSFERRING HIGH FLAMMABILITY LIQUIDS CLASS IIA AND IIB
(Capacities and technical data identical with those of standard versions).
The version with stator in PTFE white, suitable for liquids class IIA,
is marked with designation „XA” (Ex II 1/2 G IIA T4).
The version with stator in PTFE black, suitable for liquids class IIB,
is marked with designation „XB” (Ex II 1/2 G IIB T4).
ECCENTRIC WORM-DRIVE PUMP, BEARING FLANGE VERSION, WITH STATOR IN PTFE WHITE
EC-TYPE EXAMINATION CERTIFICATE NO. PTB 99 ATEX 4050X
Type
Immersion length 700 mm
Immersion length 1000 mm
Immersion length 1200 mm
F 550 SXA-50/21
Part No. 550 23 020
Part No. 550 23 021
Part No. 550 23 022
F 560 S1XA-50/21
–
Part No. 560 20 810
Part No. 560 20 812
F 560 S2XA-50/21
–
Part No. 560 20 910
Part No. 560 20 912
ECCENTRIC WORM-DRIVE PUMP, PLANETARY GEAR VERSION, WITH STATOR IN PTFE WHITE
EC-TYPE EXAMINATION CERTIFICATE NO. PTB 99 ATEX 4051X
Type
Immersion length 700 mm
Immersion length 1000 mm
Immersion length 1200 mm
F 550 GSXA-50/21
Part No. 550 23 030
Part No. 550 23 031
Part No. 550 23 032
F 560 GS1XA-50/21
–
Part No. 560 21 010
Part No. 560 21 012
F 560 GS2XA-50/21
–
Part No. 560 21 110
Part No. 560 21 112
ECCENTRIC WORM-DRIVE PUMP, BEARING FLANGE VERSION, WITH STATOR IN PTFE BLACK
EC-TYPE EXAMINATION CERTIFICATE NO. PTB 99 ATEX 4052X
Type
Immersion length 700 mm
Immersion length 1000 mm
Immersion length 1200 mm
F 550 SXB-50/21
Part No. 550 23 400
Part No. 550 23 401
Part No. 550 23 402
F 560 S1XB-50/21
–
Part No. 560 21 210
Part No. 560 21 212
F 560 S2XB-50/21
–
Part No. 560 21 310
Part No. 560 21 312
ECCENTRIC WORM-DRIVE PUMP, PLANETARY GEAR VERSION, WITH STATOR IN PTFE BLACK
EC-TYPE EXAMINATION CERTIFICATE NO. PTB 99 ATEX 4053X
18
Type
Immersion length 700 mm
Immersion length 1000 mm
Immersion length 1200 mm
F 550 GSXB-50/21
Part No. 550 23 410
Part No. 550 23 411
Part No. 550 23 412
F 560 GS1XB-50/21
–
Part No. 560 21 410
Part No. 560 21 412
F 560 GS2XB-50/21
–
Part No. 560 21 510
Part No. 560 21 512
VISCOSITY CHART
Media
Alkyd resins
Apple-purée
Baby food
Brewers’s yeast
Butter
Butter cream, sour
Butter fat
Castor oil
Castor oil
Caustic soda 50%
Chocolate confectionery
Chocolate sauce
Cleaning emulsions
Cocao butter
Cocao paste
Coconut oil
Cod-liver oil
Corn oil
Cotton seed oil
Cream, 30–50% fat
Dental adhesive
Dipropyleneglycol
Evaporated milk
Evaporated milk, sweetened
Fruit juice
Fruit juice concentrate
Fruit mash
Gelatine
Glucose
Glycerine 100%
Glycerine 100%
Viscosity
Temperature
=cP)
500 – 3.000 mPas (^
^cP)
1.500 mPas (=
Media
20 °C
Molasses 80 °Bx
20 °C
Molasses 83 °Bx
=cP)
1.400 mPas (^
=cP)
370 mPas (^
40 °C
Molasses 85 °Bx
20 °C
Motor oil SAE 10 W
=cP)
30.000 mPas (^
^cP)
550 mPas (=
40 °C
Motor oil SAE 140
20 °C
Motor oil SAE 20 W
=cP)
45 mPas (^
=cP)
2.420 mPas (^
40 °C
Motor oil SAE 30
10 °C
Motor oil SAE 40
=cP)
1.000 – 1.500 mPas (^
^cP)
45 mPas (=
20 °C
Motor oil SAE 50
20 °C
Motor oil SAE 5W
=cP)
2.600 mPas (^
=cP)
280 mPas (^
40 °C
Motor oil SAE 90
50 °C
Oleic acid
=cP)
1.500 mPas (^
=cP)
50 mPas (^
70 °C
Olive oil
60 °C
Palm oil
=cP)
4.000 mPas (^
=cP)
80 mPas (^
20 °C
Paraffin emulsion
20 °C
Peanut oil
=cP)
35 mPas (^
=cP)
30 mPas (^
40 °C
Polyester resin
60 °C
Polyglycerine caprinate
=cP)
60 mPas (^
=cP)
11–115 mPas (^
20 °C
Polymer solution
20 °C
Polyol (A-Component)
=cP)
30.000 mPas (^
=cP)
107 mPas (^
20 °C
Polyol, non-pigmented
20 °C
Potassium hydroxide
=cP)
80 mPas (^
=cP)
6.100 mPas (^
40 °C
Printing ink (and colours)
20 °C
Pudding
=cP)
50 mPas (^
=cP)
1.500 mPas (^
20 °C
Rapeseed oil
20 °C
Resin solution
=cP)
600 mPas (^
=cP)
1.200 mPas (^
20 °C
Salad dressing
45 °C
Salad oil
=cP) 25–30 °C
4.300 – 6.800 mPas (^
=cP)
12.100 (^
0 °C
=cP)
4.500 mPas (^
10 °C
Shampoo
Soft cheese
Soybean oil
=cP)
1.490 mPas (^
^cP)
20 mPas (=
20 °C
Soybean oil, treated
20 °C
Starch solution 25° Baumé
=cP)
110 mPas (^
=cP)
8.000 mPas (^
80 °C
Steam turbine oil
20 °C
Sugar solution 65° Bx
=cP)
2.000 mPas (^
=cP)
8.500 mPas (^
40 °C
Sugar solution 70° Bx
20 °C
Tomato ketchup
=cP)
3.000 mPas (^
=cP)
65 mPas (^
20 °C
Tomato paste
40 °C
Tooth paste
=cP)
200 mPas (^
=cP)
55 mPas (^
20 °C
Train oil
20 °C
Transformer oil
=cP)
10–100 mPas (^
=cP)
150 mPas (^
20 °C
Transformer oil
45 °C
Vegetable soup
=cP)
85 mPas (^
=cP)
500 mPas (^
60 °C
Vitamin oil
90 °C
Water-based lacquer
=cP)
60–200 mPas (^
=cP)
600 mPas (^
20 °C
Whey
20 °C
Whipped foods
20 °C
White oil
Malt extract
=cP)
150 mPas (^
=cP)
9.500 mPas (^
Mayonnaise
=cP)
2.000 mPas (^
20 °C
Glycerine 100%
Glycol
Gravy
Hand creme
Honey
Jam
Lacquers (25% pigments)
Lard
Latex emulsions
Linseed oil
Liqueurs
Liquid egg
Liquid soap
Liquid wax
Lubricating oil
Machine oil, heavy
Machine oil, light
20 °C
Yogurt
Viscosity
Temperature
=cP)
10.000 mPas (^
^cP)
50.000 mPas (=
20 °C
=cP)
100.000 mPas (^
=cP)
160 mPas (^
20 °C
=cP)
2.300 mPas (^
^cP)
160 mPas (=
20 °C
=cP)
380 mPas (^
=cP)
600 mPas (^
20 °C
=cP)
900 mPas (^
^cP)
50 mPas (=
20 °C
=cP)
700 mPas (^
=cP)
40 mPas (^
20 °C
=cP)
85 mPas (^
=cP)
130 mPas (^
20 °C
=cP)
3.000 mPas (^
=cP)
40 mPas (^
20 °C
=cP)
3.000 mPas (^
=cP)
6.000 –7.000 mPas (^
30 °C
=cP)
20.000 mPas (^
=cP)
85.000 mPas (^
20 °C
=cP)
500 –5.000 mPas (^
=cP)
67 mPas (^
20 °C
=cP)
550 –2.200 mPas (^
=cP)
1.000 mPas (^
40 °C
=cP)
160 mPas (^
=cP)
7.100 mPas (^
20 °C
=cP)
1.300 –2.600 mPas (^
=cP)
65 mPas (^
20 °C
=cP)
3.000 mPas (^
=cP)
30.000 mPas (^
20 °C
=cP)
80 mPas (^
^cP)
600 –800 mPas (=
20 °C
=cP)
300 mPas (^
=cP)
300 –1.100 mPas (^
20 °C
=cP)
120 mPas (^
^cP)
400 mPas (=
20 °C
=cP)
1.000 mPas (^
=cP)
195 mPas (^
30 °C
=cP)
70.000 mPas (^
^cP)
100 mPas (=
40 °C
=cP)
30 mPas (^
=cP)
75 mPas (^
30 °C
=cP)
430 mPas (^
^cP)
4.500 mPas (=
20 °C
20 °C
20 °C
20 °C
20 °C
20 °C
20 °C
20 °C
40 °C
15 °C
ZONE 0 · VISCOSITY CHART
FLUX
10 °C
20 °C
40 °C
20 °C
20 °C
60 °C
20 °C
20 °C
20 °C
20 °C
20 °C
10 °C
10 °C
=cP)
900 mPas (^
=cP)
800 –1.500 mPas (^
20 °C
=cP)
1.500 mPas (^
^cP)
300 mPas (=
40 °C
=cP)
150 mPas (^
40 °C
40 °C
20 °C
The media listed above have to be considered as examples only, as their viscosity may change substantially due to different composition
and/or other temperatures. An in-service test will provide the utmost certainty in selecting the most suitable pump type. This applies especially
to „Non-Newtonian liquids“, the exact viscosity of which is difficult to define and may change during pumping operation (intrinsic viscosity).
FLUX sales representatives will always be at your disposal for an individual demonstration.
19
WORLD OF PUMPS –
PUMPS FOR THE WORLD
All around the globe, FLUX is synonymous
with top standards in pump technology.
Whether it is barrel pumps, high viscosity
liquid pumps, vertical centrifugal immersion
pumps, air-operated diaphragm pumps, liquid
meters, mixers or top class accessories –
FLUX with its complete and comprehensive range
is always the one to address to.
Benefit from our competence.
We look for ward to hearing from you!
F500 013/3 E
Distributed by: