Instrument Grade Brushless DC Servo Motors
3.55" x 2.5" (90mm x 64mm) Series
Part/Model Number
Specification
Units
Supply Voltage
VDC
oz-in
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Terminal Resistance
Ohms
Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Peak Current
Amps (A)
oz-in
Peak Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Thermal Resistance
Celsius/W
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
Continuous Torque
Performance (119050)
Speed
Current
4000
3500
3000
2500
45
40
35
30
25
20
1500
1000
15
10
50
24
22
0.1553
3715
4.4
60
11.5
0.081
7.518
0.053
5.56
0.053
0.425
0.449
1.48
4319
38
284
2.005
1.055
14.71
1.21
105
0.0138
9.74E-5
33.6
952.5
24
36
0.2542
4342
7.6
116
12.5
0.088
6.166
0.044
4.56
0.044
0.242
0.255
1.74
5259
61
375
2.6475
1.052
13.07
1.19
105
0.0145
1.02E-4
36.0
1020.6
Standard Features
2000
500
0
0
119051
• Shielded Ball Bearings
• 8-Pole Rotor
5
0
100 150 200 250 300
Torque (oz-in)
Connection Chart
• Neodymium Magnets
• 3-Phase Stator
• Hall Sensors
• Aluminum Housing
• Brakes
• Drives
Complementary Products
Current (A)
Speed (rpm)
4500
119050
• Encoders
• Gearboxes (consult factory)
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque recorded at max. winding temperature at 25°C ambient,
mounted to a 12.0”x12.0”x0.50” heat sink.
Color/Pin
Function
Motor ΦC
Black / 1
Vcc
2
Sensor 3
3
Sensor 2
4
Sensor 1
5
Ground
6
Motor ΦA
Red / 7
Motor ΦB
White / 8
60° Electrical Spacing
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
B 34
____
Instrument Grade Brushless DC Servo Motors
3.55" x 3.0" (90mm x 76mm) Series
Part/Model Number
Specification
Units
Supply Voltage
VDC
oz-in
Continuous Torque
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Terminal Resistance
Ohms
Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Peak Current
Amps (A)
oz-in
Peak Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Thermal Resistance
Celsius/W
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
Performance (119053)
Speed
Current
Speed (rpm)
3000
60
50
2000
40
1500
30
1000
20
500
10
100
200 300 400
Torque (oz-in)
24
63
0.4448
2641
7.9
123
16.6
0.117
9.451
0.067
6.99
0.067
0.323
0.389
1.24
3434
48
453
3.1982
1.205
10.29
1.15
105
0.0201
1.42E-4
48.0
1360.8
Standard Features
2500
0
0
119053
24
49
0.3459
3265
7.6
118
15
0.106
7.977
0.056
5.9
0.056
0.283
0.322
1.41
4067
54
428
3.0217
1.14
12.01
1.17
105
0.0191
1.35E-4
44.8
1270.1
• Shielded Ball Bearings
• 8-Pole Rotor
70
0
500
Connection Chart
• Neodymium Magnets
• 3-Phase Stator
• Hall Sensors
• Aluminum Housing
• Brakes
• Drives
Complementary Products
Current (A)
3500
119052
• Encoders
• Gearboxes (consult factory)
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque recorded at max. winding temperature at 25°C ambient,
mounted to a 12.0”x12.0”x0.50” heat sink.
Color/Pin
Function
Motor ΦC
Black / 1
Vcc
2
Sensor 3
3
Sensor 2
4
Sensor 1
5
Ground
6
Motor ΦA
Red / 7
Motor ΦB
White / 8
60° Electrical Spacing
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
B 35
____
Instrument Grade Brushless DC Servo Motors
3.55" x 3.75" (90mm x 95mm) Series
Part/Model Number
Specification
Units
Supply Voltage
VDC
oz-in
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Terminal Resistance
Ohms
Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Peak Current
Amps (A)
oz-in
Peak Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Thermal Resistance
Celsius/W
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
Continuous Torque
Performance (119056)
Speed (rpm)
2000
Speed
Current
119056
24
77
0.5436
2174
7.8
124
19.0
0.134
11.439
0.081
8.46
0.081
0.363
0.457
1.07
2838
44
496
3.5018
1.256
11.25
1.13
105
0.0286
2.02E-4
60.0
1701
24
91
0.6425
1864
8.1
126
20.1
0.142
12.764
0.09
9.44
0.09
0.404
0.524
0.99
2543
40
505
3.5653
1.297
10.28
1.11
105
0.0293
2.07E-4
64.0
1814.4
24
105
0.7413
1605
8.3
125
21.4
0.151
14.224
0.1
10.52
0.1
0.444
0.591
0.92
2281
37
518
3.6571
1.331
9.41
1.09
105
0.0303
2.14E-4
67.2
1905.1
Standard Features
50
30
1000
20
500
10
0
100 200 300 400 500 600
Torque (oz-in)
Connection Chart
• Neodymium Magnets
• 3-Phase Stator
• Hall Sensors
• Aluminum Housing
Comple*mentary Products
40
1500
0
0
119055
• Shielded Ball Bearings
• 8-Pole Rotor
Current (A)
2500
119054
• Encoders
• Gearboxes (consult factory)
• Brakes
• Drives
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque recorded at max. winding temperature at 25°C ambient,
mounted to a 12.0”x12.0”x0.50” heat sink.
Color/Pin
Function
Motor ΦC
Black / 1
Vcc
2
Sensor 3
3
Sensor 2
4
Sensor 1
5
Ground
6
Motor ΦA
Red / 7
Motor ΦB
White / 8
60° Electrical Spacing
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
B 36
____
Instrument Grade Brushless DC Servo Motors
3.55" x 4.25" (90mm x 108mm) Series
Part/Model Number
Specification
Units
Supply Voltage
VDC
oz-in
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Terminal Resistance
Ohms
Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Peak Current
Amps (A)
oz-in
Peak Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Thermal Resistance
Celsius/W
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
Continuous Torque
Performance (119058)
Speed (rpm)
1750
1500
Speed
Current
24
119
0.8401
1377
8.3
121
23.1
0.163
16.063
0.113
11.88
0.113
0.485
0.658
0.85
2021
34
541
3.8195
1.358
9.313
1.06
105
0.035
2.47E-4
75.2
2131.9
24
132
0.9319
1214
8.4
119
24.1
0.17
17.483
0.123
12.93
0.123
0.525
0.726
0.80
1856
32
549
3.8759
1.382
8.754
1.04
105
0.036
2.54E-4
77.6
2199.9
Standard Features
40
35
30
25
1250
119058
• Shielded Ball Bearings
• 8-Pole Rotor
1000
20
750
15
500
10
250
0
0
5
0
100 200 300 400 500 600
Torque (oz-in)
Connection Chart
• Neodymium Magnets
• 3-Phase Stator
• Hall Sensors
• Aluminum Housing
• Brakes
• Drives
Complementary Products
Current (A)
2000
119057
• Encoders
• Gearboxes (consult factory)
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque recorded at max. winding temperature at 25°C ambient,
mounted to a 12.0”x12.0”x0.50” heat sink.
Color/Pin
Function
Motor ΦC
Black / 1
Vcc
2
Sensor 3
3
Sensor 2
4
Sensor 1
5
Ground
6
Motor ΦA
Red / 7
Motor ΦB
White / 8
60° Electrical Spacing
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
B 37
____