Brushless DC Motors with Integrated Controller
5.25" x 6.76" (133mm x 172mm) Series
Part/Model Number
Specification
Units
150203-01
Supply Voltage
VDC
oz-in
Continuous Torque
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Winding Resistance
Ohms
Winding Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Peak Current
Amps (A)
oz-in
Peak Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Rotation
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
27.6
100
0.706
3525
11.70
261
28.9
0.204
9.57
0.068
7.08
0.068
0.11
0.24
1.70
3900
16.5
150
1.059
2.18
2.9
CCW (SE)
105
0.0168
1.19E-4
288
8164.7
Performance (150203-00)
4500
18
16
3500
3000
2500
Speed
Current
14
12
10
8
2000
1500
1000
6
4
25
50
75
100
Torque (oz-in)
2
0
125
Connection Chart
• Neodymium Magnets
• Integrated Controller
• Sealed to IP65
• Aluminum Housing
Complementary Products
Current (A)
Speed (rpm)
4000
500
0
0
Standard Features
• Sealed Ball Bearings
• 4-Pole Rotor
Color/Pin
Red
Black
Function
+27.6 VDC
Return
• Gearboxes (consult factory)
• NEMA 56 Mounting
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque Recorded with max. winding temperature at 25°C ambient,
mounted to a 12.0”x 12.0”x 0.50” heatsink.
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
F 11
____
Brushless DC Motors with Integrated Controller
5.25" x 8.78" (133mm x 223mm) Series
Part/Model Number
Specification
Units
150214-00
Supply Voltage
VDC
oz-in
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Winding Resistance
Ohms
Winding Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Peak Current
Amps (A)
oz-in
Peak Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Rotation
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
27.6
320
2.2592
1875
20.00
444
54.0
0.381
16.77
0.118
12.40
0.118
0.11
0.32
1.20
2225
30.0
504
3.5582
0.01
1.5
CCW (SE)
105
0.0299
2.11E-4
296
8391.5
Continuous Torque
Performance (150214-00)
2500
1500
25
Speed
Current
15
1000
10
500
5
0
0
100
200
300
Torque (oz-in)
0
400
Connection Chart
• Neodymium Magnets
• Integrated Controller
• Sealed to IP65
• Aluminum Housing
Complementary Products
20
Current (A)
Speed (rpm)
2000
Standard Features
• Sealed Ball Bearings
• 4-Pole Rotor
• Gearboxes (consult factory)
• NEMA 56 Mounting
Color/Pin
Red
Black
Orange
Function
+27.6 VDC
Return
Low Speed
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque Recorded with max. winding temperature at 25°C ambient,
mounted to a 12.0”x 12.0”x 0.50” heatsink.
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
F 12
____
Brushless DC Motors with Integrated Controller
5.25" x 10.15" (133mm x 256mm) Series
Part/Model Number
Specification
Units
150215-00
Supply Voltage
VDC
oz-in
Continuous Torque
Nm
Speed @ Cont. Torque
RPM
Current @ Cont. Torque
Amps (A)
Continuous Output Power
Watts (W)
oz-in/sqrt W
Motor Constant
Nm/sqrt W
oz-in/A
Torque Constant
Nm/A
V/krpm
Voltage Constant
V/rad/s
Winding Resistance
Ohms
Winding Inductance
mH
No-Load Current
Amps (A)
No-Load Speed
RPM
Peak Current
Amps (A)
oz-in
Peak Torque
Nm
Electrical Time Constant
ms
Mechanical Time Constant
ms
Rotation
Max. Winding Temperature
Celsius
oz-in-sec2
Rotor Inertia
kg-m2
oz
Weight (Mass)
g
27.6
864
6.0998
1700
48.50
1086
86.3
0.609
16.97
0.12
12.55
0.12
0.05
0.20
2.50
2200
55.5
1025
7.2365
0.01
1.4
CCW (LE)
105
0.0726
5.13E-4
475
13466
Standard Features
2500
50
2000
40
30
1500
Speed
Current
1000
10
500
0
0
20
200
400 600
Torque (oz-in)
0
800 1000
• Sealed Ball Bearings
• 4-Pole Rotor
Connection Chart
• Neodymium Magnets
• Integrated Controller
• Sealed to IP64
• Aluminum Housing
Complementary Products
Current (A)
Speed (rpm)
Performance (150215-00)
• Gearboxes (consult factory)
Color/Pin
Stud (+)
Stud (-)
White
Function
+27.6 VDC
Return
Low Speed
Notes
eat sink.
2 Peak values are theoretical and supplied for reference only.
3 Continuous Torque Recorded with max. winding temperature at 25°C ambient,
mounted to a 12.0”x 12.0”x 0.50” heatsink.
This document is for informational purposes only and should not be considered as a binding description of the products or their performance in all applications. The performance data on this page depicts typical performance under controlled
laboratory conditions. Actual performance will vary depending on the operating environment and application. AMETEK reserves the right to revise its products without notification. The above characteristics represent standard products.
For products designed to meet specific applications, contact PITTMAN Motor Sales Department.
PITTMAN PRODUCTS
343 Godshall Drive, Harleysville, PA 19438
USA: +1 267 933 2105 - Europe: +33 240928751 - Asia: +86 21 5763 1258
www.pittman-motors.com
F 13
____