Working with Scaled Drawings

Drawing 1 is at a scale of 1:100 - As a result the
text which is 3mm stays in porportion to the
building.
POOL
LOMBAARD STREET
GROUND FLOOR
Drawing 3 is at a scale of 1:500 - As a result the
text which is 3mm appears almost half the size of
the building.
Drawing 1 - 1:100
A solution to this would be to change the text size on each different scale and
put it on a different layer for example all the floor plan's text on a layer & the
site plan text on a different layer
LOMBAARD STREET
POOL
GROUND FLOOR
A: 60.000 m2
TILES
Another common habit is that the entire site plan is created at a scale of 1:100
including text to fit that scale & then when the drawing is put onto layout &
rescaled to 1:500 in the Drawing Selection Settings instead of in the View map
settings.
Drawing 2 -1:200
POOL
A: 60.000 m2
TILES
Drawing 3 - 1:500
POOL
GROUND FLOOR
A: 60.000 m2
TILES
LOMBAARD STREET
GROUND FLOOR
LOMBAARD STREET
WORKING WITH SCALED DRAWINGS
A: 60.000 m2
TILES
Drawing 2 is at a scale of 1:200 - As a result the
text which is 3mm appears bigger, because the
building is half the size of drawing 1.
This isn't necessarily the wrong way of doing it, however in most cases the
text comes out 1/2 mm tall and impossible to read as well as the fills appear
very dense as shown on drawing 4.
Drawing 4 - 1:500