AOP
Falling film
Sideloop
infraCABINET
Batch - Low transmission
Batch - High transmission
photonCABINET
Micro LED
Micro Medium pressure
controlCABINET
prozessCONTROL
Control unit
spectroSENSE
Photo-spectrometer
powerBOX
Power supply
Example configuration
MPDSEVO Batch-L Photoreactor 400-700 ml
The world’s bestselling batch photoreactor is particularly suitable for carrying out simple basic photochemical research with
a product volume of approx. 400-700 ml and is mentioned in
many publications. Its simple design makes this photoreactor
a universal, flexible standard photoreactor for liquids in which
the absorption of the reaction medium is not particularly high
and the specific demands on the photoreactor cannot be more
closely defined in advance.
mits the irradiation physics of the system to be measured by the
appropriate spectrometer.
The reaction times can be set at any frequency, which ensures a
high product turnover close to equilibrium.
The optical path of >2 cm makes it possible to mix the reaction
medium with a conventional magnetic stir bar. The corresponding magnetic stir bar creates the condition for a complete and
proper mixing of the reaction medium. This allows reactions
with a high transmission to be irradiated unproblematically in
the course of a process development phase.
Optionally the photoreactor can be heated or cooled down by
means of a temperature control cladding. The sensor port per-
17
AOP
Falling film
Sideloop
Batch - Low transmission
Batch - High transmission
Lamp holder
Micro LED
Micro Medium pressure
Immersion tube
MPDS®-Fitting
Cooling water inlet
Cooling water outlet
MPDS®-Fitting
Cooling tube
Filter liquid inlet
Filter tube (optional)
Filter liquid outlet
MPDS®-Fitting
Sampling
Inerting / Temperature measurement port
Radiation source
Port for optional UV sensor
Drain
Peschl Ultraviolet GmbH
Weberstraße 19, 55130 Mainz / Germany
peschl-ultraviolet.com
Phone
Fax
Email
+49 (0) 6131 143 845-0
+49 (0) 6131 143 845-90
[email protected]
18