Cat. No.D02-01
Thermometers with
Electric Contact
OUTLINE
This thermometer with an electric contact is an
indicating thermometer in which an electric contact
is installed. The contact can be set at any
positions. A pressure type thermometer, in which
liquid is charged and its expansion and contraction
due to temperature change is applied, is used as an
temperature element. This thermometer is
classified into the non-mercury organic liquid filled
type and mercury filled type. Additionally, this
catalog is formed by classifying this thermometer
into the type with a microswitch and the type with a
contact point according to the type of applied
contact, and into the drip-proof type and the
pressure resistant explosion-protected type
according to the construction of a case.
* When selecting a thermometer, select a thermometer which is
normally applied to a temperature range of 30% to 60% of full
span. Check to confirm that the material of the wetted parts is
appropriate to measuring gas or liquid.
SPECIFICATION 1
Manufacturing temperature range:
Liquid filled type
• -70g ~ 600g
Mercury filled type
• -50g ~ 650g
Electric contact type:
With micro switch
With contact switch
Construction:
Indoor use (With contact switch)
Drip-proof type (With micro switch)
Explosion-protected type (d2G4)
Water-proof (Application for transformer)
Dial Size:
100 DIA., 150 DIA.
* 75 DIA. of thermometers with contact switch is available.
Contact NKS for details.
Mounting:
Remote surface mounting
Remote panel mounting
(Mounting hole • Mounting clamp)
Bulb • Connection material:
304st.st.
Bulb material:
Capillay
Armored tube
304st.st. or 316st.st.
430st.st. or 430st.st. +PVC
Connection:
R1/2 (PT) , R3/4 (PT) , 1/2NPT, G1/2B (PF) ,
G3/4B (PF)
JIS10K20ARF, JIS10K25ARF,
ANSI1B150RF, ANSI1B300RF
* For other connections, please contact us.
Accuracy:
Indicator accuracy
Reproductibity
Within ±2%F.S.
Within 2%F.S.
SELECTION GUIDE OF THERMOMETERS WITH ELECTRIC CONTACT1
1. Features of switch
Micro switch
F
Traveling contact
Plunger
Micro switch is able to take
electricity rating greatly, and is
available for various control other
than dispatch of warning with safety
from vibration.
Contact point
(Open and low contacting pressure) switch
Hair spring
Setting tip
Element move
a type
of contact point
b type
of contact point
Mounting
Characteristic
Moving tip
Mercury filled type
Type
Rating
Liquid filled type
Mercury filled type
Micro switch
Liquid filled type
Contact switch
Resistance load
Inductire load*
125V AC 5A
125V AC 4A
250V AC 5A
250V AC 4A
30V DC 5A
30V DC 4A
125V DC 0.4A
125V DC 0.4A
-•-•-•-•-•* AC: Power factor more than
DC: Time-contact 7ms or less.
Withstand voltage
The contact point is mainly applied to warning
including a buzzer and a slashing lamp. However,
it can be applied to switching large capacity
electricity on and off through a relay. A contacting
tip is made of high melting point alloy of platinum
and osmium.
A contact point should be applied under the normal
open mode.
Resistance load
100V AC
0.5A
200V AC
0.25A
100V DC
0.05A
200V DC
0.025A
1500V AC 1 minute
The insulation resistance (with
microcontact) should be 100MΩ or
larger by a 500V DC megger.
* The minimum load of the microcontact is
800mW and that of the contact point
1W. In the case of the microcontact,
minute load application can be
specified.
1000 V AC 1 minute
2. Explosion-protected temperature switch
The electric appliance, which is used at hazardous areas where inflammable gas or liquid causing ignition explosion exists, is imposed use of
the the explosion protected products which passed national official approval.
Thermometers with electric contact used at each place of the factory , indoor storage, outdoor tank storage, indoor tank storage, general
handling place, passage handling place of dangerous materials is available for pressure-proof and explosion- proof type.
3. Compensation system by installation place
When the ambient temperature around temperature gauge changes, the filled liquid in the indicator and capillary tube also changes to expand or
shrink and this cause the indication error. To compensate this error, following compensations are provided.
(1) Bimetal compensation
• When the ambient temperature around indicator and lead parts changes at a same time.
(2) Lead compensation
• When the ambient temperature around indicator and lead parts changes independently.
1) When the temperature change around indicator is small and big for lead parts or it's opposite case.
2) When the lead parts is under various ambient temperature condition.
3) When a part of lead parts is heated.
1)
2)
3)
Boiler
4. Temperature range (Scale range)
Normal using range.
• Scale range should be selected to use normally between 30 to 60% of full span.
• When the temperature exceeds the temperature range, it may cause to break the temperature gauge.
For example, if there will be a case that the gauges pass the right on the equator or cold district during
transportation, or store them at cold district, it needs careful attention.
2
SELECTION GUIDE OF THERMOMETERS WITH ELECTRIC CONTACT2
4. Bulb type
Union type
• Standard spec.
By tightening the fixing screw, it fixied
to the connecting thread so that
position of bulb does not change.
Maximum allowable working pressure
of union type is
Less than 200g h 2MPa
Over 200g h 1MPa
Bulb
Fixing screw
(If the pressure is higher than above,
thermowell should be provided.)
Connecting thread
Slide type
• At the time when it needs to adjust the bulb position by the changing the position of fluid to be measured in a tank or other vessel.
• At the time when it needs to insert the bulb up to the bottom of thermowell.
Bulb
Connecting thread
Fixing screw
By tightening the gasket with fixing
screw, bulb can be fixed at any
position.
Maximum allowable working pressure
of slide type is 0.3MPa
(If the pressure is higher than above,
thermowell should be provided.)
Gasket
Plain type
• In case the bulb to be casted into the fluid.
5. Bulb minimum insertion length
Minimum
insertion length
Minimum
insertion length
According to type, temperature range and bulb diameter, minimum insertion
length is decided.
When placing order or decide the specifications, select a suitable length
which is longer than the minimum insertion length to keep the performance.
A good example
A bad example
6. Thermowell
In the case of following conditions, thermowell should be provided to protect bulb.
(1) In case of corrosion fluid, thermowell with suitable material is necessary.
(2) In case of high pressure, necessary to use thermowell suitable for operating pressure.
(3) In case of fluid with flow, necessary to use thermowell suitable for flow and viscosity.
(4) In case of fluid leaking out when taking off the thermometer,necessary to use thermowell.
(5) In case of filled liquid in thermometer is leak out from bulb and it is harmful, necessary to use thermowell.
(1)
(2)
Corrosion
(3)
(4)
High pressure
Flow
3
Taking off thermometer
(5)
Leakage of filled liquid
THERMOMETERS WITH ELECTRIC CONTACT1
1. With micro switch thermometer
Mounting
Max. lead Dial size
length
(mm)
Sensing method
Manufacturing range
Compensation
Liquid filled type
-70g ~ 150g
Lead
compensation
-
Liquid filled type
-70g ~ 300g
Lead
compensation
15m
100
Model
TF14
Drip-proof type (Non-explosion protected)
I stem type
Mercury filled type
-50g ~ 650g
Bimetal
compensation
10m
TE54
Liquid filled type
-70g ~ 300g
Lead
compensation
20m
TF56
Mercury filled type
-50g ~ 650g
Bimetal
compensation
10m
Liquid filled type
-70g ~ 300g
Lead
compensation
20m
Hole
mounting
Clamp
mounting
Mercury filled type
-50g ~ 650g
Bimetal
compensation
10m
Hole
mounting
Clamp
mounting
Liquid filled type
-70g ~ 300g
Lead
compensation
20m
Mercury filled type
-50g ~ 650g
Bimetal
compensation
10m
Liquid filled type
-70g ~ 300g
Lead
compensation
Mercury filled type
-50g ~ 650g
Mercury filled type
100 DIA. surface mounting
150
150DIA. surface mounting
Clamp
mounting
20m
-
TD25
Bimetal
compensation
10m
-
TD21
-30g ~ 650g
Bimetal
compensation
5m
100
TX54
Mercury filled type
-30g ~ 650g
Bimetal
compensation
5m
150
TX56
Liquid filled type
-70g ~ 300g
Lead
compensation
20m
150
TX81
100DIA. panel mounting
Explosion-protected
type
TE56
TF64
TF74
TE64
TE74
TF66
TF76
TE66
TE76
150DIA. panel mounting
* For transformer
(Waterproof and moisture protected type)
TF54
100
Hole
mounting
Clamp
mounting
Hole
mounting
Surface mounting
Surface mounting
* Specifications in accordance with JEM standard.
4
THERMOMETERS WITH ELECTRIC CONTACT2
2. With contact switch thermometer
Drip-proof type (Non-explosion protected)
Mounting
Surface mounting
Panel mounting
(Hole mounting )
* For transformer
(Waterproof and moisture protected type)
Explosion-protected
type
Panel mounting
(clamp mounting )
Sensing method
Manufacturing range
Compensation
Max. lead
length
Dial size
Model
(mm)
Lead compensation h20m
100
Bimetal compensation h5m
150
Lead compensation h50m
100
Bimetal compensation h20m
150
Lead compensation h20m
100
Bimetal compensation h5m
150
Lead compensation h50m
100
Bimetal compensation h20m
150
Lead compensation h20m
100
Bimetal compensation h5m
150
Lead compensation h50m
100
Bimetal compensation h20m
150
TK54
TK56
TJ54
TJ56
TK64
TK66
TJ64
TJ66
TK74
TK76
TJ74
TJ76
-70g ~ 500g
Bimetal
compensation
5m
-
TD10
Mercury filled type
-50g ~ 650g
Bimetal
compensation
20m
-
TD11
Liquid filled type
-70g ~ 500g
Bimetal
compensation
5m
100
TW84
Liquid filled type
-70g ~ 500g
Bimetal
compensation
5m
100
TW54
Liquid filled type
-70g ~ 500g
Mercury filled type
-50g ~ 650g
Liquid filled type
-70g ~ 500g
Mercury filled type
-50g ~ 650g
Liquid filled type
-70g ~ 500g
Mercury filled type
-50g ~ 650g
Liquid filled type
Indoor use
Water-proof type
* Specifications in accordance with JEM standard.
5
CONNECTION • BULB SPECIFICATION
1. Without thermowell
Connection
d DIA.
Connection
Fixing screw
W22 Thread 14
Bulb
out dia.
d DIA.
Flange type
d DIA.
Union type
Screw type
• Not available to direct type and
slide type.
10 DIA.
24
(10)
L
34
Max. operating pressure: 2MPa (20kgf/cm2) for less than 200g
1MPa (10kgf/cm2) for 200g or over
12 DIA.
Fixing screw
d DIA.
T
d DIA.
Gasket
Connection
Slide type
8 DIA.
Note
13 DIA.
L
(10)
40
16 DIA.
• T=1/2 is not available.
• Slide type is not available.
Thermowell
out dia.
d1 DIA
Bulb
out dia.
d DIA
Max. operating pressure 0.3MPa (3kgf/cm2)
2. With thermowell
Connection
Flange type
d1 DIA.
Union type
L
(10)
45
d1 DIA.
15 DIA. 10 DIA.
• T=1/2 is not available.
L
(10)
40
19 DIA. 13 DIA.
Connection R1/2 (PT) or 1/2 NPT
d1 DIA.
W22 thread 14
(10)
L
Fixing screw
23 DIA. 13 DIA.
(25) 45
• T=1/2 is not available.
• Welding type well is not
available.
Coneection R1/2 (PT) or 1/2 NPT
L
(10)
(25)
45
Flange rating
R1/2 (PT) , 1/2NPT
G1/2B (PF)
R3/4 (PT) , G3/4B (PF)
JIS10K20ARF
JIS10K25ARF
ANSl1B150RF
ANSl1B300RF
(Fixing screw only=W22 thread14)
Taper 19
23
Fixing screw
Connecting screw
Standard
connection
Note
12 DIA. 8 DIA.
d1 DIA.
Standard type
Double socket type
Fixing screw
Slide type
Fixing screw
W22 thread 14
Union type Slide type
Screw type
13 DIA.
• T=1/2 is not available.
• Welding type well is not
available.
Note
Other connections except shown left
are available.
Contact NKS for details.
3. Plain type
Note
fd
Plain type
Bulb
L
d DIA.=8 DIA., 10 DIA., 12 DIA., 13DIA., 16 DIA.
6
Remote type only.
Not available to direct type.
GRADUATIONS
Refer to the manufacturing specifications of respective models regarding
the graduations of respective models.
range g
Scale division and number entry position
0 ~ 50
0
0
0
0 ~ 100
0 ~ 500
0 ~ 60
10
20
100
0
0
0
0 ~ 120
0 ~ 600
0 ~ 80
10
20
100
20
40
200
0
0
0 ~ 400
0 ~ 150
0 ~ 250
0 ~ 650
60
50
0
100
-10
-20
0
0
100
100
60
120
600
60
300
80
400
120
150
150
150
150
200
50
100
500
50
100
500
100
50
0
40
80
400
90
50
0
0 ~ 300
40
80
400
40
200
30
0
30
60
300
30
60
300
20
100
0
0 ~ 200
20
40
200
200
200
200
300
250
250
400
300
500
TD21 • TD25
600 650
Contact indication figure
-10 ~ 50
-20 ~ 100
-10 ~ 100
-10
-30 ~ 50
0
-30
-30 ~ 120
-50
-70 ~ 50
-70
-70 ~ 100
-70
20
40
20
-20
-30
-50 ~ 50
10
20
-10
-40
-50
TE 5 • 6 • 7 (100 DIA.)
(With micro switch)
10
-20
0
50
100
80
20
30
60
0
-20
40
80
60
30
-40
-60
40
0
0
30
60
100
40
50
90
20
0
120
40
20
40
50
50
50
Mark in case
of two contacts
100
TE 5 • 6 • 7 (150 DIA.)
TF 5 • 6 • 7 (150 DIA.)
(With micro switch)
Contact indication
figure
Contact indication
figure
TJ 5 • 6 • 7 (100 DIA., 150 DIA.)
TK 5 • 6 • 7 (100 DIA., 150 DIA.)
(With contact switch)
TD10 • TD11
Contact indication
figure
Contact
indication figure
Contact
point type
Mark
Upper limit type
H
OFF
ON
Lower limit type
L
ON
OFF
Upper & Lower
limit type
HL
ON
OFF
OFF
ON
Ground: white
Entry: Black color, red for graduation line
and figure of minus parts.
7
TYPE OF CONTACT AND WIRING SYSTEM
With micro switch
1. Upper limit type with one contact • H (Connecting 1) - 2))
Wiring
When the temperature rises to a set value, contact points work to turn a circuit ON.
Black pointer
Operation
set
min.
3
max.
OFF
Load
Power source
Increase in
temperature
ON
OFF
2 1
ON
Black pointer
Decrease
Wiring 1) and 2) reverses ON and OFF at the set point.
Note: If this type is applied as the lower limit type,
setting should be corrected by the dead band.
Dead band
2. Lower limit type with one contac • L (Connecting 2) - 3))
Wiring
When the temperature decreases to a set value, contact points work to turn a circuit ON.
Black pointer
Operation
Dead band
ON
1
ON
OFF
Decrease
Black pointer
Power source
Wiring 1) and 2) reverses ON and OFF at the set point.
Note: If this type is applied as the upper limit type, setting
should be corrected by the dead band.
max.
set
Load
Increase in
temperature
OFF
min.
2 3
3. Upper & lower limit type with two contact • HL
(1) - 2) Connecting, 5) - 6) Connecting)
Wiring
Black pointer
This is the combination of the upper limit type and the lower limit type and
each works independently.
Refer to the previous 1 and 2 for the functioning figure.
3
2
1
Load
4
5
6
Load
Red pointer
3
2
1
Power source
Power source
Wiring
4. Upper limit type with two contact • 2H
(Connecting 1) - 2), Connecting 4) - 5))
This is the combination of two upper limit types and each works independently.
Refer to the previous 1 for the functioning figure.
Black pointer
Load
6
5
4
1
2
3
Load
4
5
6
Load
Load
Red pointer
Power source
Power source
Wiring
5. Lower limit type with two contact • 2L
(Connecting 2) - 3), Connecting 5) - 6))
Black pointer
This is the combination of two lower limit type and each works independently.
Refer to the previous 2 for the functioning figure.
Power source
Power source
Red pointer
6. Center parts setting type with two contact • HLR
Wiring
This is the series combination of the upper limit type and lower limit type.
When both contact points are ON, the circuit turns ON.
Operation
OFF
min.
OFF
ON
set
set
2
1
Load
max.
Power source
Black pointer Red pionter
With contact switch
Wiring
1. Upper limit type with one contact • H
When the temperature rises to a set value, contact points work to turn a circuit ON.
Load
1
Upper
limit
Operation
Power source
2
OFF
min.
ON
set
Black pointer
max.
Wiring
2. Lower limit type with one contact • L
When the temperature decreases to a set value, contact points work to turn a circuit ON.
Load
1
Operation
Lower
limit
ON
min.
OFF
set
max.
3. Upper & lower limit type with two contact • HL
Wiring
Upper
limit
This is the combination of the upper limit type and the lower limit type.
Because of the common pole, each circuit doesn't work indepently.
Operation
OFF
min.
ON
set
ON
Power source
2
Red pointer
Lower
limit
Black pointer
max.
OFF
Red pointer
2
3
Load
1
Power source
Load
8
EXPLOSION-PROOF
Explosion-protected construction
Explosion-protected construction is a totally enclosed construction such that even if the explosive gas explodes inside the container, the container
withstands the force of the explosion and there is no danger of ignition of external explosive gases.
Application range: d2G4
1) Explosion-protected construction: d
2) Explosion class
:2
3) Ignitability
: G4
4) Hazardous areas : Zone 1 or zone 2
5) Objective industries: Petrochemical, chemical fiber, syntthetic resin, ethylene, methanol,dielectric products manufacturing, liquefied gas,
electric hurnace, pharmaceuticals, paints, ammonium sulfate, soda, other measurement medium or industries in which
there is the danger of ighition and explosion.
Classification of hazardous areas:
Hazardous area
Contents
Zone 0
A place where hazardous atmosphere is continuously pressent or present for a long period under ordinary circumstances.
Zone 1
A place where hazardous atmosphere is likely to occur under ordinary circumstances.
Zone 2
A place where hazardous atmosphere is likely to occur under abnormal circumstances.
Explosion test equipment
Classification of explosion:
1
Minumum gap with a 25mm lenght of
patch which permits the flame
propagation.
Over 0.6mm
2
0.4mm to 0.6mm
3
Up to 0.4mm
Explosion
class
Classification of ignition groups:
Ignition class
Ignition point
Limits of temperature rise (deg)
G1
Over 450g
320
G2
300g to 450g
200
G3
200g to 300g
200
G4
135g to 200g
200
G5
100g to 135g
200
G6
85g to 100g
200
Example of classification of typical explosive gases:
Ignition class
Explosion class
The standard ambient temprature range
limit of the electrical instrument in the
normal using shall be 40g
G1
G2
G3
G4
Acetone
Ethanol
Gasoline
Acetadehyde
Hexane
Etyhl ether
Ammonia
Amylacetate-iso
Carbon monoxide
1-Butanol
Ethane
Butane
G5
Acetic acid Butric anhydride
1
Ethyl acetate
Toulene
Propane
Benzene
Methanol
Methane
2
3
Carbon gas
Water gas
Hydrogen
Ethylene
Ethyelenoxide
Acetylene
Carbon dioxide
9
G6
EXPLOSION-PROOF 2
Method of leading external conductors and cable to a terminal box
1) Flame-proof packing type
Cable
Cable out side DIA. Protection tube
Inner dia.
Connection
Ring packing
Out dia.
9. 4
10. 5
23
12
9. 9
10. 1
PF1/2
10. 5
PF3/4
11. 0
11. 5
11. 9
14
12. 0
12. 5
12. 6
29. 5
13. 1
15. 5
13. 5
PF3/4
Terminal
box
PF1
Washer
13. 6
14. 5
16. 5
15. 6
d DIA.
D DIA.
Ring packing
M6 set screw
Cable gland
Cable clamp
Cable protection tube connection
Cable outside diameter
2) Conduit type
Conduit tube connection
PF 3/3
10
THERMOMETERS WITH MICRO SWITCH / DRIP-PROOF • DIRECT TYPE
TF14Liquid filled dial thermometer
#Dimension
(102)
(104)
112 DIA.
136
Gasket bore. 9 DIA.
Setting
positioning axis
I stem type
#Specification
Manufacturing range -70 ~ 150g
Case
Construction: Drip-proof • equivalent to IP33, Material: AC7A , Finishing: Black
Use switch
Accuracy
Wetted parts material Bulb: 304st.st., Connection • Flange: 304st.st.
JIS C 4505 Industrial switch
Indication Within ±2% F.S.. (No load to contactor)
Electric rating
Resistance load
Inductive load*
125V AC5A
125V AC4A
Setting
Setting
Internal abjustment
250V AC5A
250V AC4A
30V DC5A
30V DC4A
Compensation
Lead compensation
125V DC0.4A
125V DC0.4A
-• -• -• -• -• -• -•Dead band
Within 6% F.S.
* AC: Power factor more than 0.4
Ambient temperature error Within ±2% F.S./15deg
DC: Time-contact 7ms or less
Connection
R1/2 (PT) , R3/4 (PT) , 1/2NPT, G1/2B (PF) , G3/4B (PF) 1/2 is not available with 16 Dia. bulb and 19 Dia., 23 Dia. thermowell.
Number of contacts One contact • Two contact
Flange
Within 2% F.S.
Within ±3% F.S.
JIS10K20ARF, JIS10K25ARF, 0ANS11B150RF, ANS11B300RF
Without
thermowell
Connection
Reproductibity
Union type, Slide type
Double socket union type: R1/2, 1/2NPT (Connection)
With
thermowell Double socket slide type: R1/ 1/ NPT (Connection)
2, 2
Slide type is not available with 8 Dia. and 16 Dia. bulb.
#Range • Bulb DIA. • Bulb length
Range
g
Minimum
graduation
g
-70 ~ 50
2
-70 ~ 100
5
-50 ~ 50
2
-30 ~ 50
2
-20 ~ 100
2
-10 ~ 100
2
-10 ~ 50
1
0 ~ 50
1
~ 60
1
~ 80
2
~ 100
2
~ 120
2
~ 150
2
Value in parenthesis is the case with thermowell.
Bulb length (L) mm
Minimum insertion length
standard
Bulb Dia.$Length
d
(d1)
10
(15)
$
$
$
$
$
$
$
$
$
$
$
$
$
$
L
(L)
d=8 DIA.
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
150
(200)
150
(150)
150
(200)
200
(200)
150
(200)
150
(200)
300
(300)
300
(300)
300
(300)
200
(300)
200
(200)
150
(200)
150
(150)
160
(185)
125
(150)
180
(205)
215
(240)
160
(185)
170
(195)
265
(290)
355
(380)
315
(340)
245
(270)
205
(230)
180
(205)
155
(180)
130
(155)
105
(130)
145
(170)
170
(195)
130
(155)
135
(160)
210
(235)
270
(295)
245
(270)
195
(220)
165
(190)
145
(170)
125
(150)
d=12 DIA.
100
85
110
130
100
105
155
195
180
145
125
110
100
Note • Above length is the minimum necessary length of bulb to be inserted into the fluid to be measured.
• Bulb length should be over the above length and specify 5mm steps.
• In case of plain type of bulb, minimum length to be added 40mm to the above length.
11
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
90
(115)
75
(100)
100
(125)
115
(140)
90
(115)
95
(120)
135
(160)
170
(195)
155
(180)
125
(150)
110
(135)
100
(125)
90
(115)
75
(100)
65
(90)
80
(105)
95
(120)
75
(100)
80
(105)
105
(130)
135
(160)
120
(145)
100
(125)
90
(115)
80
(105)
75
(100)
Max.
500
THERMOMETERS WITH MICRO SWITCH/DRIP-PROOF • REMOTE TYPE1
Liquid filled dial thermometer
TF 54 • 100 DIA. • Surface mounting
#Dimension
(102)
3-5.5 DIA.
Mounting hole
136
136 DIA.
112 DIA.
P.C.D.122
Gasket bore. 9DIA.
Setting
positioning axis
TF 56 • 150 DIA. • Surface mounting
#Dimension
(159)
3-5.5 DIA.
Mounting hole
140
3
125
178 DIA.
159 DIA.
P.C.D.165
76
Gland JIS20b
Armored
tube
Setting
positioningaxis
TF 64 • 74 • 100 DIA. • Panel mounting
#Dimension
Mounting hole
TF74
Mounting clamp
134
3-5.5 DIA.
Mounting hole
(46)
21
Gasket bore. 9 DIA.
4
P.C.D.124
Armored
tube
110 DIA.
TF64
112 DIA.
Mounting
136 DIA.
Model
2-Mounting
clamp
Setting
positioningaxis
TF 66 • 76 • 150 DIA. • Panel mounting
#Dimension
Model
Mounting
TF66
Mounting hole
TF76
Mounting clamp
129.5
3-5.5 DIA.
Mounting hole
159 DIA.
3
178 DIA.
15
P.C.D.165
30
Setting
positioning axis
12
61
26
152 DIA.
Gland JIS20b
3-Mounting
clamp
Armored
tube
THERMOMETERS WITH MICRO SWITCH/DRIP-PROOF • REMOTE TYPE 2
TF54 • 56 • 64 • 74 • 66 • 76 Liquid filled type
#Specification
Manufacturing range
Case
-70 ~ 300g
Construction: Drip-proof • equivalent to IP43, Material: TF54 • 64 • 74: AC7A, TF56 • 66 • 76: ADC12, Finishing: Black
Use switch
Accuracy
Wetted parts material Bulb: 304st.st., Connection • Flange: 304st.st.
JIS C 4505 Industrial switch
Electric rating
Resistance load
Inductive load
125V AC5A
125V AC4A
Setting
Internal abjustment
Within ±3% F.S.
250V AC5A
250V AC4A
30V
DC5A
30V DC4A
1 • 2 • 3 • 4 • 5 • 8 • 10 • 15 • 20 (m)
Dread band Within 4% F.S.
125V DC0.4A
125V DC0.4A
Standard 3m
Max. 20m
-• -• -• -• -• -• - • Ambient
Within ±2%F.S./15deg
* AC: Power factor more than 0.4
temperature error
Lead compensation
DC: Time-contact 7ms or less
R1/2 (PT) , R3/4 (PT) , 1/2NPT, G1/2B (PF) , G3/4B (PF) 1/2 is not available with 16 Dia. bulb and 19 Dia., 23 Dia. thermowell.
Number of contacts One contact • Two contact
Setting
Lead length
Compensation
Connection
Flange
Within 2% F.S.
JIS10K20ARF, JIS10K25ARF, ANS11B150RF, ANS11B300RF
Without
thermowell
Connection
Indication Within ±2% F.S.
Reproductibity
With thermowell
Union type, Slide type
Double socket union type: R1/2, 1/2NPT (Connection)
Slide type is not available with 16 Dia. bulb.
Double socket slide type: R1/2, 1/2NPT (Connection)
* For other connections, please contact us.
#Range • Bulb DIA. • Bulb length
Range
g
Minimum
graduation
g
-70 ~ 50
2
-70 ~ 100
5
-50 ~ 50
2
-30 ~ 50
2
-20 ~ 100
2
-10~ 100
2
-10~ 50
1
0 ~ 50
1
~ 60
1
~ 80
2
~ 100
2
~ 120
2
~ 150
2
~ 200
5
~ 250
5
~ 300
5
Value in parenthesis is the case with thermowell.
Bulb length (L) mm
Minimum insertion length
Standard
Bulb Dia.$Length
d
(d1)
10
(15)
$
L
(L)
d=8 DIA.
(d1=12 DIA.)
d=DIA.10
(d1=150 DIA.)
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
150
(200)
150
(150)
150
(200)
200
(200)
150
(200)
150
(200)
300
(300)
300
(300)
300
(300)
200
(300)
200
(200)
150
(200)
150
(150)
100
(150)
100
(150)
100
(150)
160
(185)
125
(150)
180
(205)
215
(240)
160
(185)
170
(195)
265
(290)
355
(380)
315
(340)
245
(270)
205
(230)
180
(205)
155
(180)
110
(135)
100
(125)
90
(115)
130
(155)
105
(130)
145
(170)
170
(195)
130
(155)
135
(160)
210
(235)
270
(295)
245
(270)
195
(220)
165
(190)
145
(170)
125
(150)
95
(120)
85
(110)
80
(105)
d=12 DIA.
100
85
110
130
100
105
155
195
180
145
125
110
100
75
70
65
Note • Above length is the minimum necessary length of bulb to be inserted into the fluid to be measured.
• Bulb length should be over the above length and specify 5mm steps.
• In case of plain type of bulb, minimum length to be added 40mm to the above length.
13
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
90
(115)
75
(100)
100
(125)
115
(140)
90
(115)
95
(120)
135
(160)
170
(195)
155
(180)
125
(150)
110
(135)
100
(125)
90
(115)
70
(95)
65
(90)
60
(85)
75
(100)
65
(90)
80
(105)
95
(120)
75
(100)
80
(105)
105
(130)
135
(160)
120
(145)
100
(125)
90
(115)
80
(105)
75
(100)
60
(85)
60
(85)
55
(80)
Max.
500
THERMOMETERS WITH MICRO SWITCH/DRIP-PROOF • REMOTE TYPE3
Mercury filled dial thermometer
TE 54 • 100 DIA. • Surface mounting
#Dimension
3-5.5 DIA.
Mounting hole
(107)
76
4
P.C.D.122
62
136 DIA.
112 DIA.
30
Setting
positioning axis
Gland JIS20b
TE 56 • 150 DIA. • Surface mounting
#Dimension
(159)
3-5.5 DIA.
Mounting hole
140
3
125
178 DIA.
159 DIA.
P.C.D.165
Gland JIS20b
Armored
tube
Setting
positioning axis
TE 64 • 74 • 100 DIA. • Panel mounting
#Dimension
76
Model
Mounting
TE64
Mounting hole
TE74
Mounting clamp
9
3-5.5 DIA.
Mounting hole
(47)
21
4
P.C.D.124
110 DIA.
136 DIA.
112 DIA.
Gland JIS20b
2-mounting
clamp
Setting
positioning axis
TE 66 • 76 • 150 DIA. • Panel mounting
#Dimension
TE66
Mounting hole
Gland JIS20b
Mounting clamp
3
P.C.D.165
Setting
positioning axis
14
61
26
178 DIA.
TE76
129.5
3-5.5DIA.
Mounting hole
152 DIA.
Mounting
159 DIA.
Model
3-Mounting
clamp
Armored
tube
THERMOMETERS WITH MICRO SWITCH/DRIP-PROOF • REMOTE TYPE 4
TE 54 • 56 • 64 • 74 • 66 • 76 Mercury filled dial thermometer
#Specification
Manufacturing range
-50 ~ 650g
Construction: Drip-proof • equivalent to IP43, Material: TE54 • 64 • 74: AC7A, TE56 • 66 • 76: ADC12, Finishing: Black
Case
Use switch
JIS C 4505 Industrial switch
Accuracy
Wetted parts material Bulb: 304st.st., Connection • Flange: 304st.st.
Electric rating
Resistance load
Inductive load*
125V AC5A
125V AC4A
Setting
Internal abjustment
Within ±4% F.S.
250V AC5A
250V AC4A
30V
DC5A
30V DC4A
Dead band Within 8% F.S.
1 • 2 • 3 • 4 • 5 • 8 • 10 (m)
125V DC0.4A
125V DC0.4A
Standard 3m Max. 10m
- •- •- •- •- •- •- •Ambient
* AC: Power factor more than 0.4
Within ±2% F.S./15deg
temprature error
Bimetal compensation
DC: Time-contact 7ms or less
R1/2 (PT) , R3/4 (PT) , 1 /2NPT, G1/2B (PF) , G3/4B (PF) 1/2 is not available with 16 Dia. bulb and 19 Dia., 23 Dia. thermowell.
Number of contacts 100 DIA.One contact, 150 DIA. One contact • Two contact
Setting
Lead length
Compensation
Connection
Flange
Indication Within ±2% F.S.
Reproductibity
Within 2% F.S.
JIS10K20ARF, JIS10K25ARF, ANS11B150RF, ANS11B300RF
Without
thermowell
Union type, Slide type
Double socket union type: R1/2, 1/2NPT (Connection)
With
thermowell Double socket slide type: R1/2, 1/2NPT (Connection)
Connection
Slide type is not available with 16 Dia. bulb.
* For other connections, please contact us.
#Range • Bulb DIA. • Bulb length
Value in parenthesis is the case with thermowell.
Bulb length (L) mm
Minimum insertion length
Standard
Range
g
Bulb Dia.$Length
Minimum
graduation
d
(d1)
g
$
L
(L)
With one contact
With one contact With two contact
-30 ~ 50
2
-30 ~ 120
2
-20 ~ 100
2
-10~ 50
1
0 ~ 50
1
~ 60
1
~ 80
2
~ 100
2
~ 120
2
~ 150
2
~ 200
5
~ 250
5
~ 300
5
~ 400
10
~ 500
10
~ 600
10
~ 650
20
10
(15)
400
$ (400)
200
$ (200)
200
$ (300)
400
$ (500)
10
(15)
10
(15)
400
$ (500)
400
$ (400)
300
$ (300)
200
$ (300)
200
$ (200)
150
$ (150)
150
$ (150)
100
$ (150)
100
$ (100)
100
$ (100)
100
$ (100)
100
$ (100)
10
(15)
500
$ (500)
300
$ (300)
400
$ (400)
d=8 DIA.
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
410
(430)
210
(230)
265
(285)
305
(325)
160
(180)
200
(220)
390
(410)
-
-
-
-
-
-
$
$
$
$
$
$
$
$
$
$
$
500
(500)
400
(400)
400
(400)
300
(300)
200
(300)
150
(200)
150
(150)
100
(150)
100
(100)
100
(100)
100
(100)
410
(430)
320
(340)
265
(285)
210
(230)
170
(190)
135
(155)
120
(140)
90
(110)
75
(95)
65
(85)
65
(85)
390
(410)
305
(325)
240
(260)
200
(220)
160
(180)
130
(150)
105
(125)
95
(115)
75
(95)
60
(80)
55
(75)
55
(75)
d=12 DIA.
215
115
145
270
335
270
215
170
145
115
95
80
70
55
50
45
40
With tne contact (Not available to 100mm Dia.)
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
180
(200)
100
(120)
120
(140)
225
(245)
285
(305)
225
(245)
180
(200)
145
(165)
120
(140)
100
(120)
85
(105)
70
(90)
60
(80)
50
(70)
45
(65)
40
(60)
40
(60)
135
(155)
75
(95)
90
(110)
170
(190)
210
(230)
170
(190)
135
(155)
110
(130)
90
(110)
75
(95)
65
(85)
55
(75)
50
(70)
40
(60)
40
(60)
40
(60)
40
(60)
d=8 DIA.
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
320
(340)
410
(430)
430
(450)
240
(260)
305
(325)
-
-
-
-
-
-
-
390
-
410
(430)
320
(340)
245
(265)
200
(220)
155
(175)
125
(145)
105
(125)
90
(110)
85
(105)
Note • Above length is the minimum necessary length of bulb to be inserted into the fluid to be measured.
• Bulb length should be over the above length and specify 5mm steps.
• In case of plain type of bulb, minimum length to be added 40mm to the above length.
15
d=12 DIA.
430
(450)
355
(375)
305
(325)
240
(260)
185
(205)
150
(170)
120
(140)
100
(120)
80
(100)
75
(95)
70
(90)
295
170
215
390
295
250
215
170
130
110
85
75
60
55
50
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
250
(270)
145
(165)
180
(200)
330
(350)
185
(205)
110
(130)
135
(155)
240
(260)
340
(360)
240
(260)
185
(205)
155
(175)
135
(155)
110
(130)
85
(105)
70
(90)
60
(80)
50
(70)
45
(65)
40
(60)
40
(60)
330
(350)
250
(270)
210
(230)
180
(200)
145
(165)
115
(135)
95
(115)
75
(95)
65
(85)
55
(75)
50
(70)
45
(65)
Max.
d=8 DIA., 16 DIA.
1000
d=10 DIA., 12 DIA.
13 13 DIA.
3000
EXPLOTION-PROOF THERMOMETER WITH MICRO SWITCH 1
TD 25 Liquid filled dial thermometer
#Dimension
Terminal
box
175
221
15
4-10 DIA.
Mounting hole
40 °
40°
P.C.D.230
157
(160)
62
214 DIA.
25 (75)
Flame-proof
packing type
105
165
Setting positioning
axis
80
115
Applicable model
d2G4
Labor ministry inspection No.
No.24201
Weight
Approx.12kg (Indicator part)
Conduit type
Manufacturing range
Indication dial
Use switch
Accuracy
#Specification
-70 ~ 300g
With local indicator
JIS C 4505 Industrial switch
Number of contacts One contact, Two contact
Setting
Lead length
Case
Wetted parts
Compensation
Connection
Flange
Indication Within ±2% F.S.
Reproductibity
Setting
Dead band
Electric rating
Resistance load
Within 2% F.S.
Within ±3% F.S.
125V
250V
30V
125V
Within 4% F.S.
External adjustment
Ambient
1 • 2 • 3 • 4 • 5 • 8 • 10 • 15 • 20 (m)
Within ±2% F.S./15deg
Standard 3m temperature error
Max. 20m
Construction: Drip-proof • equivalent to IP54, Material: AC7A, Finishing : Glay
AC5A
AC5A
DC5A
DC0.4A
Inductive load
(
Power factor 0.75
)
Time-contact 7ms or less
125V
250V
30V
125V
AC4A
AC4A
DC4A
DC0.4A
Bulb: 304st.st., Connection • Flange: 304st.st.
Lead compensation
R1/2 (PT) , R3/4 (PT) , 1/2NPT, G1/2B (PF) , G3/4B (PF) 1/2 is not available with 16 Dia. bulb and 19 Dia., 23 Dia. thermowell.
JIS10K20ARF, JIS10K25ARF, ANSI1B150RF, ANSI1B300RF
Without
thermowell
Connection
Union type, Slide type
Double socket union type: R1/2, 1/2NPT (Connection)
With
thermowell Double socket slide type: R1/2, 1/2NPT (Connection)
Slide type is not available with 16 Dia. bulb.
#Range • Bulb DIA. • Bulb length
Range
g
Minimum
graduation
g
-70 ~ 50
2
-70 ~ 100
5
-50 ~ 50
2
-30 ~ 50
2
-20 ~ 100
2
-10~ 100
2
-10~ 50
1
0 ~ 50
1
~ 60
1
~ 80
2
~ 100
2
~ 120
2
~ 150
2
~ 200
5
~ 250
5
~ 300
5
Value in parenthesis is the case with thermowell.
Bulb length (L) mm
Minimum insertion length
Standard
Bulb Dia.$Length
d
(d1)
10
(15)
$
L
(L)
d=8 DIA.
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
150
(200)
150
(150)
150
(200)
200
(200)
150
(200)
150
(200)
300
(300)
300
(300)
300
(300)
200
(300)
200
(200)
150
(200)
150
(150)
100
(150)
100
(150)
100
(150)
160
(185)
125
(150)
180
(205)
215
(240)
160
(185)
170
(195)
265
(290)
355
(380)
315
(340)
245
(270)
205
(230)
180
(205)
155
(180)
110
(135)
100
(125)
90
(115)
130
(155)
105
(130)
145
(170)
170
(195)
130
(155)
135
(160)
210
(235)
270
(295)
245
(270)
195
(220)
165
(190)
145
(170)
125
(150)
95
(120)
85
(110)
80
(105)
d=12 DIA.
100
85
110
130
100
105
155
195
180
145
125
110
100
75
70
65
Note • Above length is the minimum necessary length of bulb to be inserted into the fluid to be measured.
• Bulb length should be over the above length and specify 5mm steps.
• In case of plain type of bulb, minimum length to be added 40mm to the above length.
16
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
90
(115)
75
(100)
100
(125)
115
(140)
90
(115)
95
(120)
135
(160)
170
(195)
155
(180)
125
(150)
110
(135)
100
(125)
90
(115)
70
(95)
65
(90)
60
(85)
75
(100)
65
(90)
80
(105)
95
(120)
75
(100)
80
(105)
105
(130)
135
(160)
120
(145)
100
(125)
90
(115)
80
(105)
75
(100)
60
(85)
60
(85)
55
(80)
Max.
500
EXPLOTION-PROOF THERMOMETER WITH MICRO SWITCH 2
TD 21 Mercury filled dial thermometer
#Dimension
Terminal
box
175
221
15
40°
4-10 DIA.
Mounting hole
40 °
(157)
(160)
214DIA.
P.C.D. 230
Flame-proof
packing type
165
105
115
Applicable model
d2G4
Labor ministry inspection No.
No.24200
Weight
Approx11.5kg(Indicator part)
Conduit type
Manufacturing range
Indication dial
Accuracy
#Specification
-50 ~ 650g
With local indicator
Use switch
JIS C 4505 Industrial switch
Number of contacts One contact, Two contact
Setting
1 • 2 • 3 • 4 • 5 • 8 • 10 (m)
Setting
Dead band
Internal adjustment
Lead length
Indication Within ±2%F.S.
Reproductibity
standard 3m
Electric rating
Resistance load
Within 2%F.S.
Within ±4%F.S.
125V
250V
30V
125V
Within 8%F.S.
Ambient
Within ±2%F.S./15deg
temperature error
AC5A
AC5A
DC5A
CD0.4A
Inductive load
(
Power factor 0.75
)
Time-contact 7ms or less
125V
250V
30V
125V
Max. 10m
AC4A
AC4A
DC4A
DC0.4A
Construction: Drip-proof • equivalent to IP54, Material: AC7A, Finishing : Glay
case
Wetted parts
Bulb: 304st.st., Connection • Flange: 304st.st.
Compensation
Bimetal compensation
R1/2 (PT) , R3/4 (PT) , 1/2NPT, G1/2B (PF) , G3/4B (PF) 1/2 is not available with 16 Dia. bulb and 19 Dia., 23 Dia. thermowell.
Connection
Flange
JIS10K20ARF, JIS10K25ARF, ANSI1B150RF, ANSI1B300RF
Without
thermowell
Union type, Slide type
Double socket union type: R1/2, 1/2NPT (Connection)
With
thermowell Double socket slide type: R1/2, 1/2NPT (Connection)
Connection
Slide type is not available with 16 Dia. bulb.
#Range • Bulb DIA. • Bulb length
Value in parenthesis is the case with thermowell.
Bulb length (L) mm
Minimum insertion length
standard
Range
Minimum
graduation
g
g
Bulb Dia.$Length
d
(d1)
$
L
(L)
With one contact
With one contact With two contact
-30 ~ 50
2
-30 ~ 120
2
-20 ~ 100
2
-10~ 50
1
0 ~ 50
1
~ 60
1
~ 80
2
~ 100
2
~ 120
2
~ 150
2
~ 200
5
~ 250
5
~ 300
5
~ 400
10
~ 500
10
~ 600
10
~ 650
20
10
(15)
400
$ (400)
200
$ (200)
200
$ (300)
400
$ (500)
10
(15)
10
(15)
400
$ (500)
400
$ (400)
300
$ (300)
200
$ (300)
200
$ (200)
150
$ (150)
150
$ (150)
100
$ (150)
100
$ (100)
150
$ (150)
150
$ (150)
150
$ (150)
10
(15)
500
$ (500)
300
$ (300)
400
$ (400)
d=8 DIA.
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
410
(430)
210
(230)
265
(285)
305
(325)
160
(180)
200
(220)
390
(410)
-
-
-
-
-
-
500
$ (500)
400
$ (400)
400
$ (400)
300
$ (300)
200
$ (300)
150
$ (200)
150
$ (150)
100
$ (150)
100
$ (100)
100
$ (100)
100
$ (100)
410
(430)
320
(340)
265
(285)
210
(230)
170
(190)
135
(155)
120
(140)
90
(110)
75
(95)
65
(85)
65
(85)
390
(410)
305
(325)
240
(260)
200
(220)
160
(180)
130
(150)
105
(125)
95
(115)
75
(95)
60
(80)
55
(75)
55
(75)
d=12 DIA.
215
115
145
270
335
270
215
170
145
115
95
80
70
55
50
45
40
d=16 DIA.
(d1=23 DIA.)
180
(200)
100
(120)
120
(140)
225
(245)
285
(305)
225
(245)
180
(200)
145
(165)
120
(140)
100
(120)
85
(105)
70
(90)
60
(80)
50
(70)
45
(65)
40
(60)
40
(60)
135
(155)
75
(95)
90
(110)
170
(190)
210
(230)
170
(190)
135
(155)
110
(130)
90
(110)
75
(95)
65
(85)
55
(75)
50
(70)
40
(60)
40
(60)
40
(60)
40
(60)
d=8 DIA.
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
d=12 DIA.
320
(340)
410
(430)
430
(450)
240
(260)
305
(325)
-
-
-
-
-
-
-
390
-
410
(430)
320
(340)
245
(265)
200
(220)
155
(175)
125
(145)
105
(125)
90
(110)
85
(105)
Note • Above length is the minimum necessary length of bulb to be inserted into the fluid to be measured.
• Bulb length should be over the above length and specify 5mm steps.
• In case of plain type of bulb, minimum length to be added 40mm to the above length.
17
Max.
With tne contact
d=13 DIA.
(d1=19 DIA.)
430
(450)
355
(375)
305
(325)
240
(260)
185
(205)
150
(170)
120
(140)
100
(120)
80
(100)
75
(95)
70
(90)
295
170
215
390
295
250
215
170
130
110
85
75
60
55
50
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
250
(270)
145
(165)
180
(200)
330
(350)
185
(205)
110
(130)
135
(155)
240
(260)
340
(360)
240
(260)
185
(205)
155
(175)
135
(155)
110
(130)
85
(105)
70
(90)
60
(80)
50
(70)
45
(65)
40
(60)
40
(60)
330
(350)
250
(270)
210
(230)
180
(200)
145
(165)
115
(135)
95
(115)
75
(95)
65
(85)
55
(75)
50
(70)
45
(65)
d=8 DIA., 16 DIA.,
1000
d=10 DIA., 12 DIA.,
13 DIA.
3000
THRMOMETER WITH MICRO SWITCH FOR TRANSFORMER 1
TX 54
• 56 Mercury filled dial thermometer • Waterproof and moisture resistance type
TX54 • 100 DIA.
TX56 • 150 DIA.
Armored
tube
b
4-7 DIA.
Mounting hole
D
b
4-10 DIA.
Mounting hole
P.C.D. D3
w
a
P.C.D.D3
n
h
D DIA.
D
w
Setting
positioning axis
Setting
positioning axis
Model Dial size
TX54
100
Dimension
D
D3
125 126
Model Dial size
b
W
h
87.5
4
112.5
TX56
150
Dimension
D
D3
a
b
W
h
188
180
23
90
7
215
Manufacturing range
Use switch
Accuracy
#Specification
-30 ~ 650g
JIS C 4505 Industrial switch
Number of contacts One contact, Two contact
Setting
Max. pointer
Max.lead length
case
Wetted parts
Compensation
Connection
Flange
Internal adjustment
Indication Within ±2% F.S.
Reproductibity
Setting
Dead band
Option
Electric rating
Within 2% F.S.
Resistance load
250V AC3A
125V DC0.4A
Inductive load
2000V AC1 minute
Insulation resistance
It is more than 500V DC 100MΩ with megger
Within ±4% F.S.
Within 8% F.S.
Ambient
Within ±2% F.S./15deg
temperature error
5m (standard 3m)
Construction: Water-proof • equivalent to IP65 , Material: Alminium alloy, Finishing: Black
Bulb: 304st.st., Connection • Flange: 304st.st.
Bimetal compensation
R1/2 (PT) , R3/4 (PT) , 1 /2NPT, G1/2B (PF) , G3/4B (PF) 1/2 is not available with 16 Dia. bulb and 19 Dia., 23 Dia. thermowell.
JIS10K20ARF, JIS10K25ARF, ANSI1B150RF, ANSI1B300RF
Without
thermowell
Connection
Union type, Slide type
Double socket union type: R1/2, 1/2NPT (Connection)
With
thermowell Double socket slide type: R1/2, 1/2NPT (Connection)
Slide type is not available with 16 Dia. bulb.
#Range • Bulb DIA. • Bulb length
Range
g
Value in parenthesis is the case with thermowell.
Bulb length (L) mm
Minimum insertion length
Minimum
graduation
g
d=8 DIA.
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
d=12 DIA.
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
-30 ~ 120
2
120 (140)
95 (115)
70
60 (80)
-20 ~ 100
2
150 (170)
120 (140)
85
75 (95)
60 (80)
0 ~ 100
2
180 (200)
140 (160)
100
85 (105)
65 (85)
~ 120
2
150 (170)
120 (140)
85
75 (95)
60 (80)
~ 150
2
120 (140)
95 (115)
70
60 (80)
50 (70)
~ 200
5
100 (120)
80 (100)
60
55 (75)
45 (65)
~ 300
5
70 (90)
60 (80)
45
40 (60)
40 (60)
~ 500
10
55 (75)
45 (65)
40
40 (60)
40 (60)
~ 650
20
45 (65)
40 (60)
40
40 (60)
40 (60)
Note • Above length is the minimum necessary length of bulb to be inserted into the fluid to be measured.
• Bulb length should be over the above length and specify 5mm steps.
• In case of plain type of bulb, minimum length to be added 40mm to the above length.
18
Max.
50 (70)
d=8 DIA., 16 DIA.
1000
d=10 DIA., 12 DIA.,
13 DIA.
3000
THRMOMETER WITH MICRO SWITCH FOR TRANSFORMER2
TX 81 Liquid filled dial thermometer • Waterproof and moisture resistance type
#Dimension
Armored
tube
b
E
4-10 DIA.
Mounting hole
a
Setting
positioning axis
Setting
pointer
h
E1
D DIA.
w
Dimension
Model Dial size
TX81
150
D
E
E1
a
b
W
h
188
127
152
23
105
7
206
Manufacturing range
Use switch
Accuracy
#Specification
-70 ~ 300g
JIS C 4505 Industrial switch
Number of contacts One contact ~ Four contact
Setting
Max. pointer
Max.lead length
Cace
Wetted parts
Compensation
Connection
Flange
Internal adjustment
Indication Within ±2% F.S.
Reproductibity
Setting
Dead band
Electric rating
Within 2% F.S.
Resistance load
Within ±4% F.S.
250V AC10A
Inductive load
Within 7% F.S.
125V DC0.6A
2000v AC 1minute
Insulation resistance
20m (standard 3m)
It is more than 500V DC 100MΩ with megger
Construction: Water-proof • equivalent to IP65, Material: Alminium alloy, Finishing: Black
Standard
Ambient
Within ±2% F.S./ 15deg
temperature error
Bulb: 304st.st., Connection • Flange: 304st.st.
Lead compensation
R1/2 (PT) , R3/4 (PT) , 1/2NPT, G1/2B (PF) , G3/4B (PF) 1/2 is not available with 16 Dia. bulb and 19 Dia., 23 Dia. thermowell.
JIS10K20ARF, JIS10K25ARF, ANSI1B150R, ANSI1B300RF
Without
thermowell
Connection
Union type, Slide type
Double socket union type: R1/2, 1/2NPT (Connection)
With
thermowell Double socket slide type: R1/2, 1/2NPT (Connection)
Slide type is not available with 16 Dia. bulb.
#Range • Bulb DIA. • Bulb length
Range
g
Minimum
graduation
g
Value in parenthesis is the case with thermowell.
Bulb length (L) mm
Minimum insertion length
d=8 DIA.
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
d=12 DIA.
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
-70 ~ 100
5
125 (150)
105 (130)
85
75 (100)
65 (90)
-50 ~ 50
2
180 (205)
145 (170)
110
100 (125)
80 (105)
-20 ~ 100
2
160 (185)
130 (155)
100
90 (115)
75 (100)
0 ~ 50
1
355 (380)
270 (295)
195
170 (195)
135 (160)
~ 100
2
205 (230)
165 (190)
125
110 (135)
90 (115)
~ 120
2
180 (205)
145 (170)
110
100 (125)
80 (105)
75 (100)
~ 150
2
155 (180)
125 (150)
100
90 (115)
~ 200
5
110 (135)
95 (120)
75
70 (95)
60 (85)
~ 300
5
90 (115)
80 (105)
65
60 (85)
55 (80)
Note • Above length is the minimum necessary length of bulb to be inserted into the fluid to be measured.
• Bulb length should be over the above length and specify 5mm steps.
• In case of plain type of bulb, minimum length to be added 40mm to the above length.
19
Max.
500
THERMOMETER WITH CONTACT SWITCH /INDOOR • REMOTE TYPE1
TK 54 • 56 Liquid filled dial thermometer • TJ 54 • 56 Mercury filled dial thermometer
Surface mounting
#Dimension
Stiing
pointer
b
3-5.5DIA.
Mounting hple
w
D DIA.
D1 DIA.
P.C.D. D3
Model Dial size
TJ54
TK54
TJ56
TK56
Dimension
D3
b
W
C
128
115
78
3
(111)
178
165
85
4
(137)
D
D1
100
112
150
165
Gasket bore 9 DIA.
Setting
positioning axis
c
TK 64 • 66 Liquid filled dial thermometer • TJ 64 • 66 Mercury filled dial thermometer
Panel mounting
(Mounting hole )
#Dimension
(46)
b
a
Setting pointer
Gasket bore. 9 DIA.
D4 DIA.
D DIA.
D1 DIA.
w
3-5.5DIA. Mounting hole
P.C.D. D3
Setting
positioning axis
TK 74 • 76 Liquid filled dial thermometer • TJ 74 • 76 Mercury filled dial thermometer
Panel mounting
(Mounting clamp)
b
Setting
pointer
Setting
pointer
(46)
Gasket bore. 9 DIA.
a
D DIA.
D4 DIA.
#Dimension
Settting
positioninf axis
Model
Dial size
TJ64 • TJ74
TK64 • TK74
TJ66 • TJ76
TK66 • TK76
Dimension
D3 D4
a
b
W
100
112 136 122 104
19
79
3
150
165 192 178 158
21
85
4
D
D1
Manufacturing range TK 53 • 70 ~ 500g TJ 53 • ~ 650g
Use switch
Contact switch (Open type low contact)
Number of contacts One contact, Two contact
Setting
TK33
Lead length
TJ33
Case
Wetted parts
Connection
Flange
Accuracy
#Specification
Indication Within ±2% F.S.
Reproductibity
Setting
Within 2% F.S.
Within ±3% F.S.
Electric rating
Resistance load
100V AC0.5A
200V AC0.25A
100V DC0.05A
200V DC0.025A
External adjustment
Dead band Within ±4% F.S.
1 • 2 • 3 • 4 • 5 • 8 • 10 • 15 • 20 (m) Standard 3m
Ambient
Within ±2% F.S./ 15deg
Bimetal compenstion 5m max.
temperature error
(350g or over 30m)
Bimetal compenstion
TJ34, TK34
Lead compenstion 20m max.
1 • 2 • 3 • 4 • 5 • 8 • 10 • 15 • 20 (m) Standard 3 m Compenstion TJ36, TK36
Bimetal compenstion • Lead compenstion
Bimetal compenstion 20 m max.
In case of more than 350g only bimetal compensation type.
Lead compenstion 50 m max.
Construction: Indoor use • equivalent to IP32, T354: ADC12, Others: AC7A, Finishing: Black
Bulb: 304st.st., Connection • Flange: 304st.st.
R1/2 (PT) , R3/4 (PT) , 1/2NPT, G1/2B (PF) , G3/4B ([F) 1/2 is not available with 16 Dia. bulb and 19 Dia., 23 Dia. thermowell.
JIS10K20ARF, JIS10K25ARF, ANSI1B150RF, ANSI1B300RF
Without
thermowell
Connection
Union type, Slide type
Double socket union type: R1/2, 1/2NPT (Connection)
With
thermowell Double socket slide type: R1/2,1/2NPT (Connection)
20
Slide type is not available with 16 Dia. bulb.
THERMOMETER WITH CONTACT SWITCH/INDOOR • REMOTE TYPE2
#Range • Bulb DIA. • Bulb length
TK 5 • 6 • 7 (Liquid filled dial thermometer • With contact switch)
Range
g
Minimum
graduation
g
-70 ~ 50
2
-70 ~ 100
5
-50 ~ 50
2
-30 ~ 50
2
-20 ~ 100
2
-10 ~ 50
1
0 ~ 50
1
~ 60
1
~ 80
2
~ 100
2
~ 120
2
~ 150
2
~ 200
5
~ 250
5
~ 300
5
~ 400
10
~ 500
10
d
(d1)
10
(15)
Value in parenthesis is the case with thermowell.
Bulb length (L) mm
Minimum insertion length
Standard
Bulb Dia.$Length
$
L
(L)
d=8 DIA.
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
200
(200)
200
(200)
50
(75)
40
(65)
55
(80)
65
(90)
50
(75)
70
(95)
95
(120)
70
(95)
65
(90)
55
(80)
50
(75)
40
(65)
40
(65)
40
(65)
40
(65)
230
(255)
230
(255)
45
(70)
40
(65)
45
(70)
55
(80)
45
(70)
60
(85)
75
(100)
60
(85)
55
(80)
45
(70)
45
(70)
40
(65)
40
(65)
40
(65)
40
(65)
170
(195)
170
(195)
d=12 DIA.
40
40
40
45
40
50
60
50
45
40
40
40
40
40
40
120
120
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
40
(65)
40
(65)
40
(65)
40
(65)
40
(65)
45
(70)
50
(75)
45
(70)
40
(65)
40
(65)
40
(65)
40
(65)
40
(65)
40
(65)
40
(65)
100
(125)
100
(125)
50
(75)
40
(65)
55
(80)
40
(65)
50
(75)
40
(65)
45
(70)
40
(65)
40
(65)
55
(80)
50
(75)
40
(65)
40
(65)
40
(65)
40
(65)
80
(105)
80
(105)
TJ 5 • 6 • 7 (Mercury filled dial thermometer • With contact switch)
Range
g
Minimum
graduation
g
-30 ~ 50
2
-30 ~ 120
2
-20 ~ 100
2
-10 ~ 50
1
0 ~ 50
1
~ 60
1
~ 80
2
~ 100
2
~ 120
2
~ 150
2
~ 200
5
~ 250
5
~ 300
5
~ 400
10
~ 500
10
~ 600
10
~ 650
20
Standard
d
(d1)
10
(15)
$
L
(L)
d=8
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
200
(200)
100
(150)
200
(200)
300
(300)
300
(300)
300
(300)
200
(200)
200
(200)
200
(200)
100
(150)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
210
(230)
120
(140)
145
(165)
290
(310)
360
(380)
290
(310)
210
(230)
170
(190)
145
(165)
120
(140)
90
(110)
75
(95)
70
(90)
60
(80)
50
(70)
45
(65)
45
(65)
160
(180)
95
(115)
110
(130)
220
(240)
270
(290)
220
(240)
160
(180)
130
(150)
110
(130)
95
(115)
75
(95)
60
(80)
60
(80)
50
(70)
40
(60)
40
(60)
40
(60)
d=12 DIA.
115
70
80
155
190
155
115
95
80
70
55
50
45
40
40
40
40
Note • Above length is the minimum necessary length of bulb to be inserted into the fluid to be measured.
• Bulb length should be over the above length and specify 5mm steps.
• In case of plain type of bulb, minimum length to be added 40mm to the above length.
21
500
d=8 DIA., 16 DIA. 1000
d=10DIA., 12DIA., 13DIA.
3000
Value in parenthesis is the case with thermowell.
Bulb length (L) mm
Minimum insertion length
Bulb Dia.$Length
Max.
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
100
(120)
60
(80)
70
(90)
130
(150)
160
(180)
130
(150)
100
(120)
85
(105)
70
(90)
60
(80)
50
(70)
45
(65)
40
(60)
40
(60)
40
(60)
40
(60)
40
(60)
75
(95)
50
(70)
55
(75)
100
(120)
120
(140)
100
(120)
75
(95)
65
(85)
55
(75)
50
(70)
40
(60)
40
(60)
40
(60)
40
(60)
40
(60)
40
(60)
40
(60)
Max.
d=8 DIA., 16 DIA. 1000
d=10 DIA., 12 DIA., 13 DIA.
3000
EXPLOTION-PROOF THERMOMETER WITH CONTACT SWITCH 1
TD 10 Liquid filled dial thermometer
$Dimension
Terminal
box
175
221
15
4-10 DIA.
Mounting hole
40°
40°
(160)
(157)
214 DIA.
P.C.D. 230
Flame-proof
packing type
165
105
115
80
Applicable model
d2G4
Labor ministry inspection No.
No.24199
(TD11Model applied product)
Weight
Approx.11kg (Indicator part)
Conduit type
Manufacturing range
Indication dial
Use switch
Accuracy
#Specification
-70 ~ 500g
With local indicator
Contact switch (Open type low contact)
Number of contacts One contact, Two contact
Setting
Lead length
Case
Wetted parts
Compensation
Connection
Flange
Electric rating
Within 2% F.S.
Resistance load
Within ±3% F.S.
100V
200V
100V
200V
Within 4% F.S.
Ambient
Within ±2% F.S./15deg
temperature error
Standard 3m
Max. 5m, 350g or over. 30m
Bulb:304st.st., Connection • Flange:304st.st.
Bimetal compensation
R1/2 (PT), R3/4 (PT), 1/2NPT, G1/2B (PF), G3/4B (PF) 1/2 is not available with 16 Dia. bulb and 19 Dia., 23 Dia. thermowell.
JIS10K20ARF, JIS10K25ARF, ANSI1B150RF, ANSI1B300RF
Union type, Slide type
Double socket union type:R1/2,1/2NPT (Connection)
Slide type is not available with 16 Dia. bulb.
With
thermowell Double socket slide type:R1/2,1/2NPT (Connection)
#Range • Bulb DIA. • Bulb length
Range
g
AC0.5A
AC0.25A
DC0.05A
DC0.025A
Construction : Drip-proof • equivalent to IP54, Material:AC7A, Finishing :Glay
Without
thermowell
Connection
Setting
Dead band
Internal adjustment
1 • 2 • 3 • 4 • 5 (m)
Indication Within ±2% F.S.
Reproductibity
Minimum
graduation
g
-70 ~ 50
2
-70 ~ 100
5
-50 ~ 50
2
-30 ~ 50
2
-20 ~ 100
2
-10 ~ 50
1
0 ~ 50
1
~ 60
1
~ 80
2
~ 100
2
~ 120
2
~ 150
2
~ 200
5
~ 250
5
~ 300
5
~ 400
10
~ 500
10
Value in parenthesis is the case with thermowell.
Bulb length (L)mm
Minimum insertion length
Standard
Bulb Dia.$Length
d
(d1)
10
(15)
$
L
(L)
d=8 DIA.
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
200
(200)
200
(200)
50
(75)
40
(65)
55
(80)
65
(90)
50
(75)
70
(95)
95
(120)
70
(95)
65
(90)
55
(80)
50
(75)
40
(65)
40
(65)
40
(65)
40
(65)
230
(255)
230
(255)
45
(70)
40
(65)
45
(70)
55
(80)
45
(70)
60
(85)
75
(100)
60
(85)
55
(80)
45
(70)
45
(70)
40
(65)
40
(65)
40
(65)
40
(65)
170
(195)
170
(195)
d=12 DIA.
40
40
40
45
40
50
60
50
45
40
40
40
40
40
40
120
120
Note • Above length is the minimum necessary length of bulb to be inserted into the fluid to be measured.
• Bulb length should be over the above length and specify 5mm steps.
• In case of plain type of bulb, minimum length to be added 40mm to the above length.
22
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
40
(65)
40
(65)
40
(65)
40
(65)
40
(65)
45
(70)
50
(75)
45
(70)
40
(65)
40
(65)
40
(65)
40
(65)
40
(65)
40
(65)
40
(65)
100
(125)
100
(125)
50
(75)
40
(65)
55
(80)
40
(65)
50
(75)
40
(65)
45
(70)
40
(65)
40
(65)
55
(80)
50
(75)
40
(65)
40
(65)
40
(65)
40
(65)
80
(105)
80
(105)
Max.
500
d=8 DIA., 16 DIA. 1000
d=10 DIA., 12 DIA., 13 DIA.
3000
EXPLOTION-PROOF THERMOMETER WITH CONTACT SWITCH 2
TD 11 Mercury filled dial thermometer
#Dimension
Terminal
box
175
221
15
4-10 DIA.
Mounting hole
40°
40°
(157)
(160)
214 DIA.
P.C.D. 230
Flame-proof
packing type
165
105
80
115
Applicable model
d2G4
Labor ministry inspection No.
No.24199
Weight
Approx.11kg (Indicator part)
Conduit type
Manufacturing range
Indication dial
Use switch
Accuracy
#Specification
-50 ~ 650g
With local indicator
Contact switch (Open type low contact)
Number of contacts One contact, Two contact
Setting
Lead length
Case
Wetted parts
Compensation
Connection
Flange
Electric rating
Within 2% F.S.
Resistance load
Within ±3% F.S.
100V
200V
100V
200V
Within 4% F.S.
Ambient
Standard 3m temperature error Within ±2% F.S./15deg
Max. 20m
Bulb: 304st.st., Connection • Flange: 304st.st.
Bimetal compensation
R1/2 (PT), R3/4 (PT), 1/2NPT, G1/2B (PF), G3/4B (PF) 1/2 is not available with 16 Dia. bulb and 19 Dia., 23 Dia. thermowell.
JIS10K20ARF, JIS10K25ARF, ANSI1B150RF, ANSI1B300RF
Union type, Slide type
Double socket union type:R1/2, 1/2NPT (Connection)
Slide type is not available with 16 Dia. bulb.
With
thermowell Double socket slide type:R1/2, 1/2NPT (Connection)
#Range • Bulb DIA. • Bulb length
Range
g
AC0.5A
AC0.25A
DC0.05A
DC0.025A
Construction: Drip-proof • equivalent to IP54 , Material: AC7A, Finishing: Glay
Without
thermowell
Connection
Setting
Dead band
Internal adjustment
1 • 2 • 3 • 4 • 5 • 8 • 10 (m)
Indication Within ±2% F.S.
Reproductibity
Minimum
graduation
g
-30 ~ 50
2
-30 ~ 120
2
-20 ~ 100
2
-10 ~ 50
1
0 ~ 50
1
~ 60
1
~ 80
2
~ 100
2
~ 120
2
~ 150
2
~ 200
5
~ 250
5
~ 300
5
~ 400
10
~ 500
10
~ 600
10
~ 650
20
Value in parenthesis is the case with thermowell.
Bulb length (L)mm
Minimum insertion length
Standard
Bulb Dia.$Length
d
(d1)
10
(15)
$
L
(L)
d=8 DIA.
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
$
200
(200)
100
(150)
200
(200)
300
(300)
300
(300)
300
(300)
200
(200)
200
(200)
200
(200)
100
(150)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
100
(100)
210
(230)
120
(140)
145
(165)
290
(310)
360
(380)
290
(310)
210
(230)
170
(190)
145
(165)
120
(140)
90
(110)
75
(95)
70
(90)
60
(80)
50
(70)
45
(65)
45
(65)
160
(180)
95
(115)
110
(130)
220
(240)
270
(290)
220
(240)
160
(180)
130
(150)
110
(130)
95
(115)
75
(95)
60
(80)
60
(80)
50
(70)
40
(60)
40
(60)
40
(60)
d=12 DIA.
115
70
80
155
190
155
115
95
80
70
55
50
45
40
40
40
40
Note • Above length is the minimum necessary length of bulb to be inserted into the fluid to be measured.
• Bulb length should be over the above length and specify 5mm steps.
• In case of plain type of bulb, minimum length to be added 40mm to the above length.
23
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
100
(120)
60
(80)
70
(90)
130
(150)
160
(180)
130
(150)
100
(120)
85
(105)
70
(90)
60
(80)
50
(70)
45
(65)
40
(60)
40
(60)
40
(60)
40
(60)
40
(60)
75
(95)
50
(70)
55
(75)
100
(120)
120
(140)
100
(120)
75
(95)
65
(85)
55
(75)
50
(70)
40
(60)
40
(60)
40
(60)
40
(60)
40
(60)
40
(60)
40
(60)
Max.
d= 8 DIA., 16 DIA. 1000
d=10 DIA., 12 DIA., 13 DIA.
3000
THRMOMETER WITH CONTACT SWITCH FOR TRANSFORMER 1
TW 84 Liquid filled dial thermometer • Indoor use
#Dimension
3-5.5 DIA.
Mounting hole
Setting
pointer
b
w
D DIA.
D1 DIA.
P.C.D. D3
Setting
positionaxis
Armored
tube
Model
Dimension
Dial size
TW84
100
D
D1
D3
b
W
112
134
124
78
3.5
Manufacturing range
Use switch
Accuracy
#Specification
-70 ~ 500g
Contact switch (Open type low contact)
Number of contacts One contact
Setting
Max. pointer
Max. lead length
Case
Wetted parts
Compensation
Connection
Flange
Internal adjustment
Indication Within ±2% F.S.
Reproductibity
Setting
Dead band
Option
Electric rating
Within 2% F.S.
Resistance load
200V AC 0.25A
200V DC 0.025A
Withstand voltage
* 1000V AC 1minute
Insulation resistance
It is more than 500V DC 100MΩ with megger
Within ±4% F.S.
Within 7% F.S.
Ambient
Within ±2% F.S./15deg
temperature error
5m (Standard 3m)
Construction: Indoor use • equivalent to IP43, Material: Alminium alloy, Finishing: Black
Bulb: 304st.st., Connection • Flange: 304st.st.
Bimetal compensation
R1/2 (PT), R3/4 (PT), 1/2NPT, G1/2B (PF), G3/4B (PF) 1/2 is not available with 16 Dia. bulb and 19 Dia., 23 Dia. thermowell.
JIS10K20ARF, JIS10K25ARF, ANSI1B150RF, ANSI1B300RF
Without
thermowell
Connection
Union type, Slide type
Double socket union type: R1/2, 1/2NPT (Connection)
With
thermowell Double socket slide type:R1/2, 1/2NPT (Connection)
Slide type is not available with 16 Dia. bulb.
• Apply the contact contactor in normal open condition.
• In the case of 2 contact point type, as a common pole exists, independent 2 circuits are not obtained.
* 2000V AC 1minute for transformer application.
#Range • Bulb DIA. • Bulb length
Range
g
Minimum
graduation
g
Value in parenthesis is the case with thermowell.
Bulb length (L) mm
Minimum insertion length
d=8 DIA.
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
d=12 DIA.
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
-70 ~ 100
5
40 (65)
40 (65)
40
40 (65)
40 (65)
-20 ~ 100
2
50 (75)
45 (70)
40
40 (65)
50 (75)
0 ~ 50
1
95 (120)
75 (100)
60
50 (75)
45 (70)
~ 100
2
55 (80)
45 (70)
40
40 (65)
55 (80)
~ 120
2
50 (75)
45 (70)
40
40 (65)
50 (75)
~ 150
2
40 (65)
40 (65)
40
40 (65)
40 (65)
~ 200
5
40 (65)
40 (65)
40
40 (65)
40 (65)
~ 300
5
40 (65)
40 (65)
40
40 (65)
40 (65)
~ 500
10
230 (255)
170 (195)
120
100 (125)
80 (105)
Note • Above length is the minimum necessary length of bulb to be inserted into the fluid to be measured.
• Bulb length should be over the above length and specify 5mm steps.
• In case of plain type of bulb, minimum length to be added 40mm to the above length.
24
Max.
500
d=8 DIA.,16 DIA.
d=10 DIA.,12 DIA.,13 DIA.
1000
3000
* Models of which temperature sensing portio
is partially flat can be mounfactured.
THRMOMETER WITH CONTACT SWITCH FOR TRANSFORMER 2
TW 54 Liquid filled dial thermometer • Waterproof and moisture resistance type
#Dimension
Armored
tube
4-7 DIA.
Mounting hole
P.C.D. D3
Setting
pointer
b
h
D
w
Dimension
Model Dial size
TW 54
100
D
D3
b
W
h
125
126
87.5
4
112.5
Manufacturing range
Use switch
Accuracy
#Specification
-70 ~ 500g
Contact switch (Open type low contact)
Indication Within ±2% F.S.
Electric rating
Within 2% F.S
Resistance load
200V AC 0.25A
200V DC 0.025A
Setting
Number of contacts One contactf • Two contact
Within ±4% F.S.
Withstand voltage
Setting
Internal adjustment
Dead band Within 7% F.S.
* 1000V AC 1minute
Ambient
Max. pointer
Option
Insulation resistance
Within ±2% F.S./15deg
temperature error
Max. lead length
5m (Standard 3m)
It is more than 500V DC 100MΩ with megger
Case
Construction: Water-proof • equivalent to IP65, Material: Alminium alloy, Finishing: Black
Wetted parts
Compensation
Connection
Flange
Reproductibity
Bulb: 304st.st., Connection • Flange: 304st.st.
Bimetal compensation
R1/2 (PT), R3/4 (PT), 1/2NPT, G1/2B (PF), G3/4B (PF) 1/2 is not available with 16 Dia. bulb and 19 Dia., 23 Dia. thermowell.
JIS10K20ARF, JIS10K25ARF, ANSI1B150RF, ANSI1B300RF
Without
thermowell
Connection
Union type, Slide type
Double socket union type:R1/2, 1/2NPT (Connection)
With
thermowell Double socket slide type:R1/2, 1/2NPT (Connection)
Slide type is not available with 16 Dia. bulb.
• Apply the contact contactor in normal open condition.
• In the case of 2 contact point type, as a common pole exists, independent 2 circuits are not obtained.
* 2000V AC 1minute for transformer application.
#Range • Bulb DIA. • Bulb length
Range
g
Minimum
graduation
g
Value in parenthesis is the case with thermowell.
Bulb length (L)mm
Minimum insertion length
d=8 DIA.
(d1=12 DIA.)
d=10 DIA.
(d1=15 DIA.)
d=12 DIA.
d=13 DIA.
(d1=19 DIA.)
d=16 DIA.
(d1=23 DIA.)
-70 ~ 100
5
40 (65)
40 (65)
40
40 (65)
-20 ~ 100
2
50 (75)
45 (70)
40
40 (65)
50 (75)
0 ~ 50
1
95 (120)
75 (100)
60
50 (75)
45 (70)
~ 100
2
55 (80)
45 (70)
40
40 (65)
55 (80)
~ 120
2
50 (75)
45 (70)
40
40 (65)
50 (75)
~ 150
2
40 (65)
40 (65)
40
40 (65)
40 (65)
~ 200
5
40 (65)
40 (65)
40
40 (65)
40 (65)
~ 300
5
40 (65)
40 (65)
40
40 (65)
40 (65)
~ 500
10
230 (255)
170 (195)
120
100 (125)
80 (105)
Note • Above length is the minimum necessary length of bulb to be inserted into the fluid to be measured.
• Bulb length should be over the above length and specify 5mm steps.
• In case of plain type of bulb, minimum length to be added 40mm to the above length.
25
Max.
40 (65)
500
d=8 DIA., 16 DIA.
d=10 DIA., 12 DIA., 13
1000
DIA.3000
Type No. Constituton 1 Please specify Type No., each spcification and temperature range when ordering.
(Note: For this Model, there is no applicable item for the figures X, but please specify X when ordering.)
TF
With micro switch • Liquid filled dial thermometer
TE
With micro switch • Mercury filled dial thermometer
TK
With contact switch • Liquid filled dial thermometer
TJ
1 Thermowell • Inner connection
0
With contact switch • Mercury filled dial thermometer
Mounting
1
With thermowell:W22 thread14 (Standard)
2
With thermowell:R1/2Double socket
3
With thermowell:1/2NPT Double socket
4
With thermowell:G1/2B Double socket
5
With thermowell:R3/4Double socket
Direct/I stem type (100 DIA.)
5
Remote/Surface nounting
6
Remote/Panel (Mounting hole)
7
Without thermowell
1
Please refer to other page for thermowell.
(SW33)
Remote/Panel (Mounting clamp)
15 Document
I stem type 150 Dia. and others direct type is available.
Contact NKS for details.
3 Connection
Mounting • Size
4
100
6
150
75 Dia. is available with electric contact.
Contact NKS for details.
2 Connecting form
0
Union type
1
Slide type
4
0
R1/2
1
R3/4
2
1
3
G1/2B
4
G3/4B
5
JIS10K20ARF
6
JIS10K25ARF
7
ANSI1B150RF
0
Nil
1
Please specify your requirement.
Drawing one sheet, Instruction manual,
Inspection procedure, Mill sheet, Test report.
/2NPT
14 Other additional spec.
8
ANSI1B300RF
A
Fixing screw (W22 thread 14)union type only
Z
Plain type
0
Nil
1
Please specify your requirement.
Case finishing • Dual scale with (f)
Connection 316st.st. option.
12 Outlet for electric wire
Plain type
Bulb dend type is
available.
0
12 Outlet for electric wire coduit type
DIN 9 DIA.
With contact switch.
3
PF3/4 Female (Standard)
2
PF1/2 Female
A
Rc1/2
B
1
/2NPT Female
With micro switch.
1
2
3
Selection spec.
4
5
6
Additional Spec. (Option)
7
8
9
10
11
T
12
13
14
15
X
Type No.
4 Range (g)
13 Treatment
1
0 ~ 50, 60, 80, 100, 120, 150
2
0 ~ 200, 250, 300 (Liquid filled type TF14 is not available)
0
3
0 ~ 400, 500 (Liquid filled type is not available)
1
Use no oil
4
0 ~ 600, 650 (Liquid filled type is not available)
2
Use no water
5
-10 ~ 50, -30 ~ 50, -50 ~ 50, -10 ~ 100
3
Use no oil • water
6
-70 ~ 50, -70 ~ 100 (Mercury filled type is not available)
7
-30 ~ 120, -20 ~ 100
10 Contact point type
Please specify range & unit.
5 Bulb Dia.
1
d=8 Dia.
2
d=10 Dia.
3
d=12 Dia.
Nil
6 Bulb length
1
H: Upper limit type with one contact
2
L: Lower limit type with one contact
3
HL: Upper & lower limit type with two contact
4
2H: Upper type with two contact
5
2L: Lower limit type with two contact
(Contact type is not available.)
4
d=13 Dia.
5
d=16 Dia.
1
2
From min. insertion length to ~ 500mm
Liquid filled type Max. 500mm
505 mm ~
1000 (8 DIA., 16 DIA.)
3000 (Others)
Mercury filled type only
(Contact type is not available.)
9 Compensation
Please specify bulb length.
1
Bimetal compensation (Micro liquid filled type is not available.)
2
Lead compensation (Micro mercury filled type is not available.
Contact 100 DIA. is not available.
Contact more than 350deg. impossibility.
7 Lead kind
9 Lead length
0
Nil (Direct type)
1
Capillary: 304st.st., Armored tube: 430st.st.
0
2
Capillary: 316st.st., Armored tube: 430st.st.
1
Less than 3m
3
Capillary: 304st.st., Armored tube: 430st.st.+PVC (Max. 100g)
2
Over 3m
4
Capillary: 316st.st., Armored tube: 430st.st.+PVC (Max.100g)
Nil (Direct type)
Please specify lead length.
* When placing an order, check to confirm the specifications including a model, range, bulb, a lead parts, etc. and then select a model number.
26
Type No. Constituton 2 Please specify Type No., each spcification and temperature range when ordering.
(Note: For this Model, there is no applicable item for the figures X, but please specify X when ordering.)
TD
Explotion-proof thermometer
Mounting
15 Document
25
With micro switch • Liquid filled dial thermometer
21
With micro switch • Mercury filled dial thermometer
10
With contact switch • Liquid filled dial thermometer
11
With contact switch • Mercury filled dial thermometer
0
Nil
1
Please specify your requirement.
Drawing one sheet, Instruction manual,
Inspection procedure, Mill sheet, Test report.
1 Thermowell • Inner connection
0
Without thermowell
1
With thermowell: W22 thread14 (Standard)
2
With thermowell: R1/2 Double socket
3
With thermowell: 1/2 NPT Double socket
4
1
5
14 Other additional spec.
Nil
1
Please specify your requirement.
Case finishing • Dual scale with (f)
Connection 316st.st. option.
With thermowell: G /2 Double socket
With thermowell: R3/4 Double socket
Please refer to other page for thermowell.
(SW33)
2 Connecting form
0
Union type
1
Slide type
4
Plain type
Bulb bend type is
available.
R /2
1
3
R /4
2
1
3
PF3/4 Female (Standard)
12 Outlet for electric wire
In case of flame-proof packing type
/2NPT
3
G1/2B
0
PF1/2 Female$10.5
4
G3/4B
1
PF1/2 Female$12
5
JIS10K20ARF
2
PF3/4 Female$10.5
6
JIS10K25ARF
3
PF3/4 Female$12
7
ANSI1B150RF
4
PF3/4 Female$14
ANSI1B300RF
5
PF3/4 Female$15.5
Fixing screw (W22 thread 14)union type only
6
PF3/4 Female$16.5
Plain type
7
PF1 Female$14
8
PF1 Female$15.5
9
PF1 Female$16.5
Z
3
1
0
A
2
12 Outlet for electric wire
In case of conduit type
3 Connection
8
1
0
Selection spec.
4
5
6
7
8
9
10
11
12
Additional Spec. (Option)
13
14
15
T D
Type No.
4
Range (g)
1
0 ~ 50, 60, 80, 100, 120, 150, 200, 250, 300
2
0 ~ 400, 500, 600, 650 (TD25is not available, TD10 650gis not available)
2
4
13 Treatment
-10 ~ 50, -10 ~ 100, -20 ~ 100, -30 ~ 50, -50 ~ 50,
-70 ~ 50, -70 ~ 100 (TD25 • 10 only)
-10 ~ 50, -20 ~ 100, -30 ~ 50,
-30 ~ 120 (TD21 • 11 only)
Please specify range & unit.
d=8 Dia.
2
d=10 Dia.
3
d=12 Dia.
4
d=13 Dia.
5
d=16 Dia.
Nil
1
Use no oil
2
Use no water
3
Use no oil • water
11 Type of outlet
5 Bulb Dia.
1
0
1
Conduit type
3
Flame-proof packing type
6 Bulb length
1
From min. insertion length to ~ 500mm
Liquid filled type Max. 500mm
2
505 mm ~
1000 (8 DIA., 16 DIA.)
3000 (Others)
Mercury filled type only
10 Contact point type
7 Lead kind
Capillary:3 04st.st., Armored tube: 430st.st.
2
Capillary: 316st.st., Armored tube: 430st.st.
3
Capillary: 304st.st., Armored tube: 430st.st.+PVC (Max. 100g)
4
Capillary: 316st.st., Armored tube: 430st.st.+PVC (Max.100g)
H: Upper limit type with one contact
2
L: Lower limit type with one contact
3
HL: Upper & lower limit type with two contact
4
2H: Upper limit type with two contact
(TD10 • 11 is not available)
2L: Lower limit type with two contact
(TD10 • 11 is not available)
5
Please specify bulb length.
1
1
9 Lead length
8 Lead length
1
Less than 3m
2
Over 3m
1
Bimetal compensation (TD21 • 10 • 11)
2
Lead compensation (TD25)
Please specify lead length.
* When placing an order, check to confirm the specifications including a model, range, bulb, a lead parts, etc. and then select a model number.
27
Type No. Constituton 3 Please specify Type No., each spcification and temperature range when ordering.
(Note:For this Model, there is no applicable item for the figures X, but please specify X when ordering.)
TX54
For transformer • With micro switch • Waterproof and moisture resistance type • Mercury filled dial thermometer, 100 DIA.
TX56
For transformer • With micro switch • Waterproof and moisture resistance type • Mercury filled dial thermometer, 150 DIA.
TX81
For transformer • With micro switch • Waterproof and moisture resistance type • Liquid filled dial thermometer, 150 DIA.
TW54
For transformer • With contact switch • Waterproof and moisture resistance type • Liquid filled dial thermometer, 100 DIA.
TW84
For transformer • With contact switch • Indoor type • Liquid filled dial thermometer, 100 DIA.
1 Thermowell • Inner connection
0
Without thermowell
1
With thermowell: W22 thread14 (Standard)
2
With thermowell: R /2 Double socket
3
1
With thermowell: /2 NPT Double socket
4
With thermowell: G1/2B Double socket
5
15 Document
1
3 Connection
With thermowell: R3/4 Double socket
Please refer to other page for thermowell.
(SW33)
2 Connecting form
R3/4
2
1
3
G1/2B
4
G3/4B
0
Nil
1
Please specify your requirement.
/2NPT
Union type
5
JIS10K20ARF
6
JIS10K25ARF
4
Plain type
7
ANSI1B150RF
3
Please specify your requirement.
Drawing one sheet, Instruction manual,
Inspection procedure, Mill sheet, Test report.
1
Slide type
2
1
R1/2
1
1
Nil
0
0
Bulb dend type is
available.
0
14 Other additional spec.
Case finishing • Dual scale with (f)
Connection 316st.st. option.
8
ANSI1B300RF
A
Fixing screw (W22 thread 14)union type only
Z
Plain type
Selection spec.
4
5
6
7
12 Outlet for electric wire
8
9
2
PF1/2 (TX54 • TW54)
3
PF3/4 (TX56)
4
PF1/1 (TX81)
0
Terminal for communication (TW84)
10
12
11
T
Additional Spec. (Option)
13
14
15
X
Type No.
4 Range (g)
13 Treatment
1
0 ~ 50, 100, 120, 150, 200, 300
2
0 ~ 400, 500 (TW54 • 84)
0
3
0 ~ 500, 650 (TX54 • 56)
1
Use no oil
4
-10 ~ 50, -20 ~ 100, -30 ~ 50,
-50 ~ 50, -70 ~ 50, -70 ~ 100 (TW54 • 84)
2
Use no water
3
Use no oil • water
5
-30 ~ 120, -20 ~ 100 (TX54 • 56)
6
Nil
-20 ~ 100, -50 ~ 50, -70 ~ 100 (TX81)
10 Contact point type
Please specify range & unit.
1
5 Bulb Dia.
1
d=8 Dia.
2
d=10 Dia.
3
d=12 Dia.
4
d=13 Dia.
5
d=16 Dia.
6 Bulb length
1
From min. insertion length to ~ 500mm
Liquid filled type Max. 500mm
2
505 mm ~
1000 (8 DIA., 16 DIA.)
3000 (Others)
Mercury filled type only
H: Upper limit type with one contact
2
L: Lower limit type with one contact
3
HL: Upper & lower limit type with two contact
(TW84 is not available.)
2H: Upper limit type with two contact
(TW54 • 84 is not available.)
2L: Lower limit type with two contact
(TW54 • 84 is not available.)
4
5
9 Cpmpensation
Please specify bulb length.
1
Bimetal compensation (TX54 • 56, TW54 • 84)
2
Lead compensation (TX81)
7 Lead kind
1
Capillary: 304st.st., Armored tube: 430st.st.
2
Capillary: 316st.st., Armored tube: 430st.st.
3
Capillary: 304st.st., Armored tube: 430st.st.+PVC (Max. 100g)
4
Capillary: 316st.st., Armored tube: 430st.st.+PVC (Max.100g)
8 Lead length
1
Less than 3m
2
Over 3m
Please specify lead length.
* When placing an order, check to confirm the specifications including a model, range, bulb, a lead parts, etc. and then select a model number.
28
THERMOWELL SPECIFICATION
#Connection parts and dimension
#Thermowell type,Size
Standard type
X Hex.
Welding type
S
T
Welding
T
Welding
d1 DIA.
Taper Screw
J
L
M
(10)
Double socket type
Drilled type (Straight)
R
(PT)
T
T
d1 DIA.
X Hex.
S
Screw type
J
(10)
Standard type
T
T
d2 DIA.
W DIA.
X Hex.
Drilled type (Taper)
Straight Screw
3
(mm)
J
T
M
(10)
T
W DIA.
Double socket type
X Hex.
d1 DIA.
Screw type
Union type
L
M
(25)
J
S
W
X
M
R21/
18
8
-
27$31.2
43
R43/
20
9.5
-
30$34.6
45
1
G /2 B
18
-
32
32$37
43
G3/4B
20
-
36
36$41.6
45
L
Welding type
Welding
(25)
M
d1 DIA.
(10)
Welding
Standard type
L
Drilled type (Straigh)
Flange type
JIS, ANSI, JPI
45
(10)
Flange type
Union type
d1 DIA.
Welding
Double socket type
L
(10)
d1 DIA.
Welding
d2 DIA.
Drilled type (Taper)
(25) 45
Note) Please refer to JIS, ANSI, JPI standard for flange size.
L
Bulb
type
15
19
Drilled type Welding type Drilled type Welding type Drilled type Welding type Welding type
Out dia (d1)
1
/2
3
/4
JIS, ANSI, JPI
o
o
o
o
o
o
Drilled type
o
o
o
Welding type
o
o
o
Drilled type
-
o
o
Welding type
-
o
o
23 DIA.
Drilled type
-
o
o
19 DIA./23 DIA. (Taper)
Drilled type
-
o
o
8.5
10.5
11
13.5
13.5
13.5
12 DIA.
d DIA.
8
8
10
10
13
13
13
15 DIA.
19 DIA.
29
Mounting
Flange
Drilled type
8.5
304 st.st., 316 st.st., 316 L st.st., Titanium, Hastelloy-B, and Monel-metal are available.
Coating is available with followings. Rubber, Kel-F, Teflon, Lead or Glass
Thermowell with coating is flange type only.
Screw (T)
Welding type
Inner dia
(d2DIA.)
#Thermowell material 1
Bulb
Thermowell
Standard Inner connection ( connection with thermometer )is
W22 thread 14 or Rc1/2
Thermowell
d DIA.
Thermo
-well
12
#Relation of Thermowell DIA. and connection
23, 19/23
(Taper)
d2 DIA.
Out dia
(d1 DIA.)
d1 DIA.
#Relation of Thermowell and bulb.
Type No. Constitution Please specify Type No., each spcification and temperature range when ordering.
(Note: For this Model, there is no applicable item for the figures X, but please specify X when ordering.)
1 • 2Connection
S W 1
Welding type
S W 2
Drilled type
S W 3
Drilled type
1
2
Straight W22 thread 14
Straight R 1/2
00
Screw Type,R1/2
01
Screw Type,R3/4
3
Straight
1/2 NPT
02
Screw Type,1/2NPT
4
5
Straight G 1/2 B
Straight R 3/4
03
Screw Type,G1/2B
04
Screw Type,G3/4B
6
Taper W22thread14
05
Flange type,JIS10K20ARF
7
8
Taper R 1/2
Taper 1/2 NPT
06
Flange type,JIS10K25ARF
07
Flange type,ANSI1B150RF
9
5
Taper G 1/2 B
Tape R 3/4
08
Flange type,ANSI1B300RF
0F
Flange type,JIS10K15ARF
0G
Flange type,JIS10K40ARF
0H
Flange type,JIS10K50ARF
Model
0W
Flange type,JPI1B150RF
0X
Flange type,JPI1B300RF
Other screw • flange (TF,GF,MF,FMF,R)
are avaibable, contact NKS for details.
3 Material
1
304 st.st.
2
316 st.st.
5
316 L st.st. Drilled type only.
In case of Drilled type, special material
titanium,hastelloy or other materials are available,
contact NKS for details.
Selection spec.
Thermowell
1
2
3
4
5
Additional Spec. (Option)
6
7
8
9
15
10
S W
X
11
X
12
13
X
X
14
X
Type No.
4 • 5Out dia
6 • 7 • 8LSize
12
Out dia12 DIA.
15
Out dia15 DIA.
001
~ 100
001
~ 100
19
Out dia19 DIA.
101
101 ~ 200
101
101 ~ 150
Welding type (mm)
Drilled type (mm)
23
Out dia23 DIA.
201
201 ~ 300
151
151 ~ 200
AA
Out dia 19/23 DIA.
Flange type with Drilled type only.
301
301 ~ 400
201
201 ~ 250
401
401 ~ 500
251
251 ~ 300
501
501 ~ 600
301
301 ~ 350
601
601 ~ 700
351
351 ~ 400
701
701 ~ 800
401
401 ~ 450
801
801 ~ 900
451
451 ~ 500
901
901 ~ 1000
501
501 ~ 550
551
551 ~ 600
601
601 ~ 650
651
651 ~ 700
701
701 ~ 750
751
751 ~ 800
801
801 ~ 850
851
851 ~ 900
901
901 ~ 950
951
951 ~ 1000
• Please specify L size.
• When required over 1000mm, please specify with 100mm steps.
30
9 Other additional spec.
0
Nil
1
Please specify your requirement.
Bore option (Drilled type only) with
plug chain.
15 Document
0
Nil
1
Please specify ypur requirement.
Drawing one sheet, Mill sheet.