P E R I M E T E R
S O L U T I O N S
contemporary display and merchandising systems
PEERLESS
display + merchandising
TM
systems
FREELINE
N O N
M O D U L A R
The FREELINE non modular system offers complete
flexibility, combining both lateral and vertical
adjustability. Ideal for retail, showroom and commercial
interiors, discreet wall mounted crossrails are easily fitted
onto elevations. Loose mobile posts may be freely applied
together with a wide selection of hanging rails, shelves
and display accessories.
Although refined in scale, FREELINE is equally effective
for full merchandising presentation or minimalist displays.
01 - 02
To reposition displays, simply lift off and relocate at will.
LADIESWEAR
MENSWEAR
FOOTWEAR ACCESSORIES
CHILDRENSWEAR
LINGERIE
SWIMWEAR
GIFTWARE LEATHERGOODS SPORTSWEAR
Whether you are considering a new shopfit or an upgrade to your existing interior, FREELINE may
be readily fitted to new or existing walls, without the need for costly shopfitting.
FREELINE
Floor Units
FREELINE floor units are
available to complement
the wall systems. Offering
maximum flexibility, these
versatile units support the
same mobile posts and
fittings to allow perimeter
equipment to easily be
moved from walls to floor.
See separate literature for further
information.
FREELINE
N O N
M O D U L A R
Crossrails
Surface mounted crossrails
with aluminium, coloured or
veneered cappings may be
applied directly to walls.
Semi-recessed crossrails in
aluminium or colour, are
designed to be partially
concealed by facing panels
for more discreet displays.
Surface mounted crossrail and capping
Semi-recessed crossrail
Posts
Posts
are
available
in
alternative lengths and may be
freely suspended from crossrails
and remain mobile for easy
relocation.
Rectangular Post
Elliptical Post
32x15mm section
illustrated full size
34x17mm section
illustrated full size
03 - 04
A wide variety of fittings
including rails, arms, shelves
and display accessories may be
applied to accommodate varied
merchandising needs.
Single or double tier displays
are recommended for most
installations, however this may
be varied to suit individual
project needs.
See technical literature for
further infomation.
Accessory + Graphic
Display panels
Side + Front Hanging + Shelving
Mobile display panels, pre-fitted
with slotted uprights or plug-in
ferrule systems, may be attached.
A selection of side hanging or rear display rails,
forward facing arms, prongs or specialist fittings
may be applied.
Rails and arms connect directly into the mobile
vertical posts, enabling displays to be totally
flexible and repositioned anywhere along the
horizontal crossrails.
Glass or timber shelves are available to order,
supported by rectangular or curved brackets and
optional fixings.
Mobile panels are also offered with a selection of
display fittings, but can also be supplied plain for
graphics and signage, or as suspended mirrors.
OMNI
WA L L U N I T S
REGULAR + LARGE
OMNI wall units are available in four standard sizes, providing
contemporary, adaptable fixtures ideal for fashion, accessories and
giftware. Merchandise may be displayed directly from fine stainless
steel frames or optional fittings. These include glass or timber
shelves, accessory prongs and intermediate display rails for front
and side presentation.
LARGE and REGULAR units are designed to rest on floors with simple
fixing to walls. See next page for MEDIUM and SMALL units.
See PEERLESS data sheets for technical infomation.
05 - 06
OMNI wall units are illustrated with
optional glass tops, shelves and
intermediate rails.
OMNI
REGULAR wall frame
OW.R2
1480H x 1200W x 300D*
* Overall
unit depths will vary subject to
fittings and merchandise displayed.
OMNI LARGE wall frame
OW.H2
OMNI
Floor Units
OMNI floor units are available
to complement OMNI wall
frames. Available in two
standard sizes with optional
fittings, floor units are also
designed to provide complete
flexibility for merchandising.
See separate literature for
further information.
2120H x 1200W x 300D*
OMNI
WA L L U N I T S
SMALL + MEDIUM
OMNI SMALL and MEDIUM wall units are
designed for easy wall mounting.
Units illustrated with optional shelves may
be fitted at heights to accommodate
suspended side or forward facing
merchandise. Accessory rails or timber
panels pre-fitted with PEERLESS plug-in
ferrule systems may also be attached.
07 - 08
Frames may be used in isolation or
combined with other OMNI wall unit sizes.
small
regular
large
medium
OMNI wall units are illustrated with
optional glass tops, shelves and
intermediate rails.
OMNI
SMALL wall frame
OW.S2
400H x 1200W x 300D*
* Overall
unit depths will vary subject to
fittings and merchandise displayed.
OMNI
MEDIUM wall frame
OW.M2 1030H x 1200W x 300D*
STEPPE
Ta b l e s
The STEPPE series of display
tables may be combined
with OMNI wall and floor
units.
See separate literature for
further information.
VERSO
WALL + CEILING FRAMES
The innovative VERSO wall and ceiling frames, offer minimalist presentation for retail
and showroom environments. Ideal for fashion and accessories, these flexible units
support side or front hanging with optional shelves.
The fine stainless steel frames are designed for perimeter locations with floor to wall
connection. Alternatively, units may be reversed and hung from structurally suitable
ceilings, either connected to walls or suspended in mid floor areas alone.
When suspended, VERSO features telescopic verticals to accommodate alternative ceiling
heights. Units may be combined in both floor mounted and suspended formats for
dramatic effect. Frames are illustrated with optional shelves.
09 - 10
See PEERLESS technical data sheets for further information.
VERSO wall to floor + wall to ceiling frame
VWF.01
VWF.02
Wall to Floor frame
1210W x 430D* x 1500H
Wall to Ceiling frame 1210W x 430D* x 1500H (2100H ext.)
* Overall
unit depths will vary subject to
fittings and merchandise displayed.
VERSO frame suspended from ceiling (mid floor)
VWF.03
Ceiling frame
1210W x 600D* x 1500H (2100H ext.)
ROTOR
Floor Units
ROTOR units are designed to
complement VERSO frames.
ROTOR is available in three
widths and two heights, with
optional display accessories.
See separate literature
further information.
for
Units feature our unique lift and twist
mechanism for instant conversion from
side to front hanging display.
UPRIGHT + POST
WA L L D I S P L AY S Y S T E M S
A refined collection of vertical UPRIGHTS and POSTS are offered
for perimeter and wall elevations, floor to ceiling mid floor
locations and window areas.
Whether your need is for a visible distinctive look or more
discreet support, our UPRIGHTS and POSTS will enhance
any retail, showroom and commercial interior, providing
optimum display and presentation.
Designed for maximum flexibility, an extensive range of
loose PEERLESS hanging rails, shelves and display
accessories are also available in alternative styles and
finishes to complement any design theme. Fittings are
easily attached to verticals and remain fully adjustable for
relocation to suit your merchandise.
11 - 12
POSTS AND PROFILES
POSTS and larger sections are offered in a
variety of rectangular and elliptical profiles,
with alternative fixings to enable them to be
attached directly to walls, or float slightly
away from perimeter elevations. Posts can
also be fitted from floor to ceiling where mid
floor or window displays are desired.
POSTS may be used on their own, integrated
into shopfitting works, or combination with
other PEERLESS systems to create many
varied and individual designs.
FLOOR FURNITURE
To extend the versatility of our perimeter
systems, freestanding fixtures are also
offered, with integrated POSTS to enable
loose equipment to be easily moved from
wall to floor units.
RECESSED UPRIGHTS
Where efficient yet discrete displays are preferred,
our finer UPRIGHTS may be integrated within
perimeter elevations, panels or joinery, for fully
recessed and unobtrusive appearance. Loose
PEERLESS fittings may again be attached for
maximum flexibility.
FERRULE
WA L L
PA N E L S
A distinctive range of WALL PANELS pre-fitted with our unique
FERRULE socket systems, providing refined and contemporary
solutions for retail display, merchandising and shelving.
WALL PANELS are available in optional sizes
and finishes to order, with a choice of
FERRULES to suite your presentation and
design requirements. Ferrules may be installed
at various centres to perfectly accommodate
your needs, with a wide range of adjustable
plug-in fittings and accessories available.
See separate literature for further information.
13 - 14
FERRULE PANELS may be mounted directly
on to walls, or fitted with adjustable feet and
brackets to float slightly in front of elevations.
Optional rear lighting can be added to
create more dramatic halo effects.
Panels may be spaced slightly apart or
grouped closer together for continuous
displays. Co-ordinated panel finishes may
also be combined to emphasise elevations.
PANELS are ideal alongside other PEERLESS
systems to define and break up areas.
Similarly, panels can be suspended from our
FREELINE non modular wall systems, or
included within our POST systems to feature
accessories or promotions.
FLOOR UNITS
In addition to our standard PEERLESS floor
units, special fixtures can be offered which
integrate our FERRULE PANELS into
customised freestanding furniture.
PEERLESS DESIGNS LIMITED
Unit 9 Brunswick Way
London N11 1JL
T
F
E
+44 ( 0)) 20 8362 8500
+44 ( 0)) 20 8362 8525
[email protected]
w w w. p e e r l e s s d e s i g n s . c o m
Registered in England No 1884996