PRESENCELIGHT 360
Presence Detectors
PRESENCELIGHT 360
SQUARE DETECTION AREA 360° UP TO 64 M2)
PRESENCE DETECTOR (PIR) FOR CEILING MOUNTING INSTALLATION
AUTOMATIC LIGHTING CONTROL BASED ON PRESENCE AND BRIGHTNESS
LIGHT SWITCH OUTPUT (RELAY, 230 V)
SUITABLE FOR INDOOR AND OUTDOOR USE
PULSE FUNCTION FOR STAIRCASE TIME SWITCH
MIXED LIGHT MEASUREMENT, SUITABLE FOR FLUORESCENT LAMPS (FL/PL), HALOGEN/ INCANDESCENT LAMPS AND LEDS
MANUAL SETTINGS ADJUSTMENT / REMOTE CONTROL OPTIONAL
CODE
OPERATING VOLTAGE
CHANNEL
COLOUR
TYPE
2000000
230 V AC
Light
White
PresenceLight 360
2000800
230 V AC
Light
Black
PresenceLight 360 BK
TECHNICAL DATA
Operating voltage
Frequency
Recommended installation height
Installation type
Power consumption
Light measurement
Setting range brightness
Light switch-off delay
Type of contact light
Lamps
Resistive load
Incandescent/halogen lamp load
Compact and fluorescent lamps
Compact and fluorescent lamps
(Number of electronic ballasts)
LED lamp
Type of connection
Max. cable cross section
Mounting plate
Size of concealed housing
Ambient temperature
Type of protection
230 V AC
50 Hz
2 – 3,5 m
Ceiling installation
0,7 W
Mixed light measurement
10 – 1500 lx
Pulse (0,5 s), 10 s-20 min
Relay 230 V
Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs
1400 VA
1200 W
960 VA (cos f = 0,8), 580 VA (cos f = 0,5)
10 x (1 x 54/58W), 5 x (2 x 54/58W), 16 x (1 x 35/36W), 8 x (2 x 35/36W),
16 x (smaller than 35/36W)
< 2W = 25W / 2–8W = 70W / > 8W = 80W
Screw terminals
2 x 2,5 mm2
70 x 70 mm
Ø 55 mm (NIS, PMI)
-20 °C … +50 °C
IP 54 (when fitted)
PRESENCELIGHT 360
Presence Detectors
PRESENCELIGHT 360
DETECTION RANGE (RECTANGULAR)
Mounting
height (A)
2m
Sittings (S)
Walking (T)
9m |3mx3m
20 m2 | 4,5 m x 4,5 m
2.5 m
16 m | 4 m x 4 m
36 m | 6 m x 6 m
0,5 m
3m
20 m2 | 4,5 m x 4,5 m
49 m2 | 7 m x 7 m
1m
3.5 m
—
64 m2 | 8 m x 8 m
1m
2
2
CONNECTION DIAGRAMS
2
0,5 m
DESCRIPTION
• Presence detector (PIR)
• Square detection area
• Ceiling mounted
• The square detection area allows accurate and
simple planning
• Mixed light measurement
• Light switch output (relay, 230 V)
• Automatic lighting control
• Lighting control with light threshold value and selflearning switch-off delay
• Pulse function for staircase time switch
• Can be configured remotely
• The switching behaviour of the presence detector
is controlled by presence and light
• The self-learning switch-off delay adjusts to
occupants’ behaviour
• The pulse function is for controlling a staircase
time switch
• The presence detector has a mixed light
measurement and is suitable for switching the
following types of lamp: Fluorescent lamps (FL/PL),
halogen and incandescent lamps as well as LEDs
• Test operation mode checks the detection area
and installation
• The parameters can either be set using the
potentiometer or via the optional service remote
control SendoPro 868-A
SCALE DRAWINGS