LUMEN
MASS (KG)
700
11 445
11.2
700
13 734
11.2
64
700
17 601
11.2
LEDtec-SM 90W
40
700
11 445
12.6
LEDtec-SM 108W
48
700
13 734
12.6
LEDtec-SM 144W
64
700
17 601
13.7
LEDtec-RE 90W
40
700
11 445
12.6
LEDtec-RE 108W
48
700
13 734
12.6
LEDtec-RE 144W
64
700
17 601
13.7
LEDs
CURRENT (mA)
LEDtec S 90W
40
LEDtec S 108W
48
LEDtec S 144W
LEDtec S
LEDtec_02_2016
DESCRIPTION
Surface Mounted
Recessed
Standard optic: 5120 – symmetrical
Standard colour: White (RAL 9003), Brilliant finish
Standard CCT: Neutral white (4000K)
options and accessories
electrical
Incorporated movement detector
Correlated colour temperature
For surface mounted version
For recessed version (available on request)
Cool white light (5700K)
MECHANICAL
Protector
Polycarbonate (IK10)
Other RAL colour, Matt finish
Colour
Other RAL colour, Brilliant finish
Other RAL colour, Textured finish
PHOTOMETRICS
5120 - Symmetrical
Optics
5120 - Asymmetrical
ACCESSORIES
Remote control
To adjust the lighting levels and dimming profile
movement detector
remote control
The optional movement detector uses a specific lens to
If the pre-set lighting levels and dimming profile need to be
determine a detection zone. The standard lens is suitable for
changed, these can easily be adjusted by an optional remote
most applications. As an option, lenses can be provided for
control. This enables the lighting scenario to be adapted at any
special needs.
time.
BEKA LEDtec
Copyright © BEKA Schréder (Pty) Ltd – 13 West View Road – Olifantsfontein (South Africa) – The information, descriptions and illustrations herein are of only an indicative nature and subject to changes without notice.
ledtec
ordering data
LEDtec S
5136
LEDtec S
Surface mounted
Recessed
5136
5136
5136
5136
5136
5136
5136
5136
5136
5136
208 Mounting Holes
ø9
85
106
300 Mounting Holes
5136
380
ledtec
DIMENSIONS IN MM
475
Recessed version
Surface mounted version
CHARACTERISTICS – LUMINAIRE
CONSTRUCTION DETAILS
Optical compartment tightness level: IP 66
Control gear tightness level: IP 66
Impact resistance (glass): IK 07
Nominal voltage: 108-305V - 50Hz
Electrical class: I
Operating temperature (Ta): -40˚C to +40˚C
Weight (total): 13.7kg
Correlated colour temperature (CCT): Neutral white light
(4000K, CRI ≥70)
Materials:
Housing: Stainless steel (3cr12)
Protector: High-impact clear glass
Standard colour: White (RAL 9003),
Brilliant finish
The LEDtec is an LED lowbay range designed for energy-efficient
lighting in industrial and commercial environments.
The luminaire consists of an IP 66 protected LED engine, which is
thermally separated from the power supply/driver compartment.
Ease of installation is facilitated by the external mounting lugs and
a hingeable connector plate.
The luminaire housing is manufactured from stainless steel (3cr12),
epoxy powder coated to Schréder’s renowned specification for
exterior finishes.
The protector is manufactured from high-impact clear flat glass
(IK 07) or vandal-resistant polycarbonate (IK 10) (optional).
The luminaire bears the SANS 60598 mark.
The lowbay is designed to operate LED light sources of up to
144W in an ambient temperature (Tq) environment of up to 35˚C,
without reducing the useful lifetime of 90 000 hours, at a lumen
depreciation of not more than 30% (L70). The LEDs are effective
high-power LEDs, 4000K at a colour rendering index ≥70.
To maximize the reliability of the LEDs, the photometric engine
is completely sealed to IP 66. This ensures that the photometric
performance is maintained over time (LEDSafe).
Electronic temperature monitoring prevents overheating of LEDs
and power supply, positioned directly next to LEDs (ThermiX®).
The LEDtec is designed for LED light sources between 90W and
144W.
APPLICATIONS
• Fuel station canopies
• Industrial areas
• Warehouses and workshops
• Multi-purpose halls
KEY ADVANTAGES
• Fully designed and manufactured in South Africa
• Designed to operate LED light sources of up to 144W in an
ambient temperature (Tq) environment of up to 35˚C, without
reducing the useful lifetime of 90 000 hours, at a lumen
depreciation of not more than 30% (L70)
• Optical compartment - IP 66
• Suitable for operating temperatures (Ta) of -40˚C to +40˚C
• Designed for easy and reliable canopy and ceiling installation
• Easily accessible power supply/driver compartment
• Glare-reduced light distribution
432
options
• High-impact resistant polycarbonate protector (IK 10)
• Incorporated movement detector
• Asymmetrical light distribution
260
120
700
675
443
520
424
355
450 to 470 (Cut-Out)
ø9
PHOTOMETRY
424
520
High-Power white LEDs
OVERVIEW
Number of LEDs
Neutral white (4000K)
Nominal flux (lm)
*
Current: 700mA
Power consumption (W)
Lifetime residual flux @ Tq 35˚C (**)
40 LEDs
48 LEDs
64 LEDs
11445
13734
17601
90
108
144
@60.000h
@90.000h
90%
70%
(*) The nominal flux is an indicative LED flux @ Tj 25°C based on LED manufacturer’s data. The real flux output of the luminaire depends on environmental
conditions (e.g. temperature and pollution) and the optical efficiency of luminaire.
The type of LED used is subject to change due to the ongoing rapid progress taking place in LED technology.
(**)
In accordance with LM-80 – TM-21
LIGHT DISTRIBUTIONS
LED optic 5120 - SYM
350 300 250 200 150 100 50
90˚
80˚
LED optic 5120 - ASYM
cd/klm
70˚
600 500 400 300 200 100
90˚
80˚
cd/klm
70˚
60˚
50˚
60˚
50˚
40˚
30˚
40˚
20˚
270˚/90˚
10˚
0˚
20˚
10˚
0˚
180˚/0˚
90°
90°
180°
30˚
270˚/90˚
180˚/0˚
0°
180°
0°
Movement detector
270°
270°
Electronic data files can be downloaded from
www.schreder.com.au
LEDtec S
5136
LEDtec S
Surface mounted
Recessed
5136
5136
5136
5136
5136
5136
5136
5136
5136
5136
208 Mounting Holes
ø9
85
106
300 Mounting Holes
5136
380
ledtec
DIMENSIONS IN MM
475
Recessed version
Surface mounted version
CHARACTERISTICS – LUMINAIRE
CONSTRUCTION DETAILS
Optical compartment tightness level: IP 66
Control gear tightness level: IP 66
Impact resistance (glass): IK 07
Nominal voltage: 108-305V - 50Hz
Electrical class: I
Operating temperature (Ta): -40˚C to +40˚C
Weight (total): 13.7kg
Correlated colour temperature (CCT): Neutral white light
(4000K, CRI ≥70)
Materials:
Housing: Stainless steel (3cr12)
Protector: High-impact clear glass
Standard colour: White (RAL 9003),
Brilliant finish
The LEDtec is an LED lowbay range designed for energy-efficient
lighting in industrial and commercial environments.
The luminaire consists of an IP 66 protected LED engine, which is
thermally separated from the power supply/driver compartment.
Ease of installation is facilitated by the external mounting lugs and
a hingeable connector plate.
The luminaire housing is manufactured from stainless steel (3cr12),
epoxy powder coated to Schréder’s renowned specification for
exterior finishes.
The protector is manufactured from high-impact clear flat glass
(IK 07) or vandal-resistant polycarbonate (IK 10) (optional).
The luminaire bears the SANS 60598 mark.
The lowbay is designed to operate LED light sources of up to
144W in an ambient temperature (Tq) environment of up to 35˚C,
without reducing the useful lifetime of 90 000 hours, at a lumen
depreciation of not more than 30% (L70). The LEDs are effective
high-power LEDs, 4000K at a colour rendering index ≥70.
To maximize the reliability of the LEDs, the photometric engine
is completely sealed to IP 66. This ensures that the photometric
performance is maintained over time (LEDSafe).
Electronic temperature monitoring prevents overheating of LEDs
and power supply, positioned directly next to LEDs (ThermiX®).
The LEDtec is designed for LED light sources between 90W and
144W.
APPLICATIONS
• Fuel station canopies
• Industrial areas
• Warehouses and workshops
• Multi-purpose halls
KEY ADVANTAGES
• Fully designed and manufactured in South Africa
• Designed to operate LED light sources of up to 144W in an
ambient temperature (Tq) environment of up to 35˚C, without
reducing the useful lifetime of 90 000 hours, at a lumen
depreciation of not more than 30% (L70)
• Optical compartment - IP 66
• Suitable for operating temperatures (Ta) of -40˚C to +40˚C
• Designed for easy and reliable canopy and ceiling installation
• Easily accessible power supply/driver compartment
• Glare-reduced light distribution
432
options
• High-impact resistant polycarbonate protector (IK 10)
• Incorporated movement detector
• Asymmetrical light distribution
260
120
700
675
443
520
424
355
450 to 470 (Cut-Out)
ø9
PHOTOMETRY
424
520
High-Power white LEDs
OVERVIEW
Number of LEDs
Neutral white (4000K)
Nominal flux (lm)
*
Current: 700mA
Power consumption (W)
Lifetime residual flux @ Tq 35˚C (**)
40 LEDs
48 LEDs
64 LEDs
11445
13734
17601
90
108
144
@60.000h
@90.000h
90%
70%
(*) The nominal flux is an indicative LED flux @ Tj 25°C based on LED manufacturer’s data. The real flux output of the luminaire depends on environmental
conditions (e.g. temperature and pollution) and the optical efficiency of luminaire.
The type of LED used is subject to change due to the ongoing rapid progress taking place in LED technology.
(**)
In accordance with LM-80 – TM-21
LIGHT DISTRIBUTIONS
LED optic 5120 - SYM
350 300 250 200 150 100 50
90˚
80˚
LED optic 5120 - ASYM
cd/klm
70˚
600 500 400 300 200 100
90˚
80˚
cd/klm
70˚
60˚
50˚
60˚
50˚
40˚
30˚
40˚
20˚
270˚/90˚
10˚
0˚
20˚
10˚
0˚
180˚/0˚
90°
90°
180°
30˚
270˚/90˚
180˚/0˚
0°
180°
0°
Movement detector
270°
270°
Electronic data files can be downloaded from
www.schreder.com.au
LUMEN
MASS (KG)
700
11 445
11.2
700
13 734
11.2
64
700
17 601
11.2
LEDtec-SM 90W
40
700
11 445
12.6
LEDtec-SM 108W
48
700
13 734
12.6
LEDtec-SM 144W
64
700
17 601
13.7
LEDtec-RE 90W
40
700
11 445
12.6
LEDtec-RE 108W
48
700
13 734
12.6
LEDtec-RE 144W
64
700
17 601
13.7
LEDs
CURRENT (mA)
LEDtec S 90W
40
LEDtec S 108W
48
LEDtec S 144W
LEDtec S
LEDtec_02_2016
DESCRIPTION
Surface Mounted
Recessed
Standard optic: 5120 – symmetrical
Standard colour: White (RAL 9003), Brilliant finish
Standard CCT: Neutral white (4000K)
options and accessories
electrical
Incorporated movement detector
Correlated colour temperature
For surface mounted version
For recessed version (available on request)
Cool white light (5700K)
MECHANICAL
Protector
Polycarbonate (IK10)
Other RAL colour, Matt finish
Colour
Other RAL colour, Brilliant finish
Other RAL colour, Textured finish
PHOTOMETRICS
5120 - Symmetrical
Optics
5120 - Asymmetrical
ACCESSORIES
Remote control
To adjust the lighting levels and dimming profile
movement detector
remote control
The optional movement detector uses a specific lens to
If the pre-set lighting levels and dimming profile need to be
determine a detection zone. The standard lens is suitable for
changed, these can easily be adjusted by an optional remote
most applications. As an option, lenses can be provided for
control. This enables the lighting scenario to be adapted at any
special needs.
time.
BEKA LEDtec
Copyright © BEKA Schréder (Pty) Ltd – 13 West View Road – Olifantsfontein (South Africa) – The information, descriptions and illustrations herein are of only an indicative nature and subject to changes without notice.
ledtec
ordering data