Technical sheet SANIGAZ CONDENS GAS CONDENSING DHW WATER HEATER/ACCUMULATOR Sanigaz Condens 6 models from 30 to 120 kW CO ND ER • Condensing model with very high efficiency of up to 109% • Premix burner for natural gas and propane • Modulation of 100 to 40% • B23 or C13, C33, C43, C53 type device • Equivalent connection lengths: up to 40m concentric and 100m dissociated flues • Anti-legionella programming • Weekly program (up to 21 times) • Very low NOx emissions < 30 ppm • Very low noise level< 45 dB(A) • ACI anti-corrosion system ENS G BOIL IN SANIGAZ CONDENS SUPPLIED AS STANDARD WITH • Enamelled tank, 8 bar operating pressure • Protection against corrosion by the ACI system: electro catalytically activated titanium anode • Cover with 50 mm of insulation • Premix burner for natural gas and propane • Ionization and hotspot ignition electrode • Control panel comprising an interface with digital backlit display • Regulating aquastats, antifreeze, temperature and overheating limiter • Dry contact for alarm relay • Access hatch Ø 95 x 70 mm • Drain valve • Metal base for models 80, 100 and 120 kW (do not remove) • Natural gas supply 20 mbar Possibility to pair it with Corhydro OPTIONS • Propane Kit • G25 Kit ACCESSORIES • Safety group kit 7 bar • Flue or vertical or horizontal outlet valve accessories TANK SUPPLIES 2 choices: • Corsi tank: up to 1500 litres • Corhydro tank: up to 3000 litres WARRANTY • Tank: 3 years • Burner and electrical equipment: 2 years Corsi TECHNICAL CHARACTERISTICS AND PERFORMANCE Storage at 80° C, cold water at 10° C Continuous stepdown at 40° C in 10 min Stepdown at 40° C in 30 min in 1 h Temperature rise time (40° C) Continuous stepdown at 60° C in 10 min Stepdown at 60° C in 30 min in 1 h Temperature rise time (60° C) Cooling constant Units L/h L L L min L/h L L L min (Wh/24h/L/K) 370-30 370-50 937 570 880 1400 24 570 270 450 730 39 0.28 1442 670 1200 1900 15 870 330 620 1100 26 0.28 Models 370-60 460-80 1732 730 1400 2600 13 1100 370 720 1300 21 0.28 2415 870 1700 2900 12 1500 430 910 1700 28 0.31 460-100 460-120 2887 940 1900 3400 10 1800 460 1100 2000 23 0.31 3492 1100 2200 4000 8 2100 510 1300 2300 19 0.31 DIMENSIONAL CHARACTERISTICS Units Overall height Position on the base Diameter Depth Width Diameter of the exhaust outlet Height of the exhaust outlet Position of the exhaust outlet Position of the exhaust outlet Gas feed height Cold water inlet height Hot water outlet height Hot water outlet position Access hatch height Drain height Safety valve height Condensate trap height Ø cold water inlet Ø hot water outlet Ø gas feed Ø drain Ø safety valve Ø Access hatch Ø condensate trap Weight when empty A C D E F G H Hx Hy K M N Ny P R S W 1 2 3 4 5 6 7 - Hx 3 44º 370-30 Models 370-60 460-80 370-50 1" 1/2 1" 1/2 3/4" 3/4" 1" - 11.5 NPT 1" 1/2 95 x 70 1" 214 480 214 Hx C 480 480 Hy 6.5º E 3 Ny Ny 2 460-120 2060 530 850 1000 900 130/200 2015 310 440 1855 225 2060 205 290 225 1425 240 F 214 Hy 6 460-100 1910 705 100/150 1905 265 375 1800 160 1910 205 175 75 1410 145 mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm Inch Inch Inch Inch Inch mm Inch kg 2 6 5 4 4 45º Sanigaz Condens 30 to 60 kW 18º 45º D 45ºCondens 80 to 120 kW Sanigaz 18º 45º D G 2 5 G 2 3 3 5 5 A N A N K KH H S S 6 6 7 4 1 1 PM PR 7 4 W R M W F Hx 3 44º Hx C Hy Hy 6.5º E 3 Ny Ny 2 6 5 4 45º 18º 2 6 5 4 45º 45º D G 2 1 - Cold water inlet (male) 2 - Output DiHW (female) 3 3 - Gas feed (female) 45º 18º D 4 - Drain (female) 5 - Safety valve (female) 6 - Access hatch G 2 7 - Condensate trap 3 5 5 A N K H N A S KH S 6 6 PM 7 4 1 1 4 7 R W PR M W Presence in Europe 1. Ygnis head office – Bourg-la-Reine, France 2. Ygnis boiler factory – Pont-de-Vaux, France 3.Ygnis plate heat exchanger and heating equipment factory - Aulnay-sous-Bois, France 4. Ygnis boiler and DHW tank factory – Cauroir, France 5. Ygnis Belgium 6. Ygnis Switzerland 7. Ygnis Italy 8. Ygnis Spain 58, avenue du Général Leclerc 92340 BOURG LA REINE - FRANCE Tel: +(33)1 46 83 60 00 Fax: +(33)1 46 83 60 01 www.ygnis.com
© Copyright 2024 Paperzz