Electromagnets
Electromagnet in Plastic Case
with Interrupter Key, for Surface Mounting
DICTATOR electromagnets are appropriate
for the use in hold open systems on fire
protection doors.
The magnets in plastic casing are available
in two versions: with and without lateral Pg7
cable gland. Both types have an interrupter
key on top of the casing. The magnet can
therefore be used on both left and right opening doors, as the interrupter key is always
accessible. The plastic casing on the magnet
meets high aesthetic requirements. Installing
the magnet is very easy as the key is fixed
to the mounting plate. The plastic casing
can completely be removed for mounting.
DICTATOR magnets are equipped with a
spark extinction diode as standard. In the
event of faulty connection, the integrated
polarity protection prevents the spark
extinction diode being destroyed.
The electromagnets have been tested
according to EN 1155 and among others
are included in the following approvals:
Z-6.5-1903, Z-6.5-1707.
Technical Data
Voltage
24 VDC ±10 %
Power consumption
67 mA (1.6 W)
Duty cycle
100 %
Operating temperature -20 °C to +60 °C
Force
700 N
Remanence
0 N
Finish
magnet and mounting plate zinc-plated
Colour of casing
white (plastic)
© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 1027
Page 07.039.00
Electromagnets
Dimensions
70
26
ø 60
8
5
38
55
4x ø 4,2
102
18
ø 20
18
55
24
5
1
25
7,5
Electromagnet EM GD 60 F 26 T
70
ø 20
ø 60
8
5
38
55
4x ø 4,2
102
18
18
55
5
24
1
25
7,5
Electromagnet EM GD 60 F 26 TK
Order Information
Page 07.040.00
EM GD 60 F 26 T electromagnet
force 700 N
part no. 040097
EM GD 60 F 26 TK electromagnet
force 700 N
part no. 040045
© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 1027