edition version 1.1
BlueLine
IFM series
ice flake production
ICM series
ice cube production series
Green ICE
KW Antibacteria
IFM series
ice flake production
IFM 70
IFM 85
IFM 50
IFM 120
IFM 200
158
IFM series ice flake machine (IFM 50)
Entirely made from stainless steel, with receding door for easier access to
the ice, and featuring an innovative concept in internal mechanics, namely
the reduction unit placed in the upper section of the evaporator. The
self-standing, single-body structure is foamed with polyurethane resins.
Granular flaked ice is produced in a vertical cylinder and conveyed to the
container/reservoir by means of an endless screw.
Airtight compressor and environment-friendly HFC refrigerant. Pilot lights
indicate operation and lack of utility water. A safety thermostat stops ice
production when the container reaches maximum storage capacity.
Possibility of air or water condensation. In the latter case, hourly
production is estimated to be 10% above standard.
IFM 50 series ice flake machines
Model
24h-production
Capacity Kg.
reservoir
External
measurements (WXDXH)
Power Kw
Power supply
Weight
IFM 50
Kg. 50
10
42x62x76
0,42
V 230/Hz50
Kg. 52
Structures entirely made from stainless steel, with receding door • New concept air filter, in contact with the condenser; owing to its
position, air flow inside the technical part of the machine is kept
for easier access to the ice, and featuring an innovative concept in
unaltered, and removal for periodical cleaning is facilitated. To avoid
internal mechanics, namely the reduction unit placed in the upper
progressive reduction of ice production capacity, the air condenser
section of the evaporator. The self-standing, single-body structure
must be kept free from dust accumulation. KW proposes an air filter
is foamed with polyurethane resins. All models are treated with
placed close to the condenser. Simple and efficient, the filter can be
AgION®, an antibacterial substance added when processing the main
easily removed directly from the front panel: when the “clean me”
plastic components involved in the ice production cycle.
warning light turns on, it will only take a minute to clean it thoroughly
under running water.
• Pressure drainage system (optional item) for residual water from
the ice production cycle and for water resulting from ice flake thawing
inside the container. This system allows for matchless installation
flexibility and offers a solution for difficult installations when the drain
High yield ice production system. The environment-friendly refrigerant
trap is at a distance of up to 15 metres and up to 1.5 metres from floor
gas is expanded directly inside a sturdy steel cylinder. Airtight compressor
level, also avoiding wastewater problems.
and environment-friendly refrigerant. Pilot lights indicate operation and
lack of utility water. A safety thermostat stops ice production when the
• Provision for storage container sanitisation system: an efficient
container reaches maximum storage capacity. Possibility of air or water
food-grade bactericidal agent, certified for food contact, contained in
condensation. In the latter case, hourly production is estimated to be
a small bag (to be replaced monthly) placed on the inner part of the
10% above standard. The machines allow the production of both supercontainer door, slowly releases sanitising vapours inside the container
and on all its contents, ice scoop included. This system is proposed
granular ice (with low water content), recommended for all industrial
by KW as a simple and efficient way to maintain the highest ice flake
applications, and granular ice (with high water content) for use on
usage safety.
delicate products.
KW Antibacteria
• Hygienic ice scoop holder: the best way to prevent contamination of
the ice flakes is to avoid bacterial proliferation on surfaces in contact
with the ice, and in particular on the scoop. This is why it is important
to store it in a clean place. The scoop holder inside the container is
sanitised by the new sanitisation system, to scoop out ice quickly and
hygienically.
Front panel with:
• ON/OFF switch (not provided on the IFM 70 model)
• Dirty condenser warning light
• Refrigerant T alarm
• T sensor failure alarm
• Water drainage pump failure alarm
IFM production units boast highly advanced technologies and
performance, with:
• Energy Saving System: this system optimises production cycle
efficiency, improving ice quality and reducing operation costs.
Green ICE
IFM 70-85-120-150-200 (ice flake production)
Model
24h-production
Capacity Kg.
reservoir
External
measurements (WXDXH)
Power Kw
Power supply
Weight
IFM 70
Kg. 70
25
53x62x93
0,33
V 230/Hz50
Kg. 55
IFM 85
Kg. 85
32
59x62x113
0,40
V 230/Hz50
Kg. 70
IFM 120
Kg. 120
40
95x60x91
n.d.
V 230/Hz50
Kg. 80
IFM 150
Kg. 150
55
95x60x112
n.d.
V 230/Hz50
Kg. 100
IFM 200
Kg. 200
55
95x60x112
n.d.
V400/3/Hz50
Kg. 140
K W A P PA R E C C H I S C I E N T I F I C I
159
ICM series
ice cube production series
ICM 32
ICM 52
ICM 150
160
ICM series ice cube machine (ICM 18)
Entirely made from stainless steel, with insulated polyurethane ice container,
available in both the air and water refrigeration versions. (Solid) ice cubes are
produced by spraying water on a copper evaporator, which cools and thus
forms crystalline ice cubes with a compact cooling area. When the cycle is
inverted the ice cubes fall into the container below.
Airtight compressor and environment-friendly refrigerant. Pilot lights indicate
operation and lack of utility water. A safety thermostat stops ice production
when the container reaches maximum storage capacity. Possibility of air
or water condensation. In the latter case, hourly production is estimated
to be 10% above standard.
ICM series ice cube machine (ICM 18)
Model
24h-production
Capacity Kg.
reservoir
External
measurements (WXDXH)
Power Kw
Power supply
Weight
ICM 18
Kg. 18
4,5
37x48x63
0,25
V 230/Hz50
Kg. 32
Structures entirely made from stainless steel, with insulated polyurethane
ice container; all models are available in both the air and water
refrigeration versions.
All models are treated with AgION®, an antibacterial substance added
when processing the main plastic components involved in the ice
production cycle.
KW Antibacteria
(Solid) ice cubes are produced by spraying water on an evaporator, which
cools and thus forms crystalline ice cubes free from residual minerals,
by emptying the water from the water system. Airtight compressor and
environment-friendly refrigerant. Pilot lights indicate operation and lack
of utility water.
Front panel with:
• ON/OFF switch (not provided on the IFM 70 model)
• Dirty condenser warning light
• Refrigerant T alarm
• T sensor failure alarm
• Water drainage pump failure alarm, (optional item)
• Patented system to reduce limescale build-up: the lime that precipitates
due to the effect of cavitation gathers in a hollow purposely created in the
water collection basin, under the pump. The operator can easily remove
the soft rubber plug that contains limescale at regular intervals, Limescaleis
eliminated by simply rinsing the plug under running water.
• Accessibility to all water system parts for easy maintenance. Removal
of the plug also facilitates access to the pump filter, for ordinary cleaning
operations aimed at removing limescale and other impurities. The spray
nozzles and pipe fittings can be easily and immediately removed and reinserted thanks to a central “quick disconnect” coupling, thus guaranteeing
perfect cleaning and ordinary maintenance operations.
• Pressure drainage system (optional item) for residual water from the ice
production cycle and for water resulting from ice cube thawing inside the
container. This system allows for matchless installation flexibility and offers
a solution for difficult installations when the drain trap is at a distance of up
to 15 metres and up to 1.5 metres from floor level, also avoiding wastewater
problems.
• Provision for storage container sanitisation system: an efficient foodgrade bactericidal agent, certified for food contact, contained in a small
bag (to be replaced monthly) placed on the inner part of the container
door, slowly releases sanitising vapours inside the container and on all its
contents, ice scoop included. This system is proposed by KW as a simple and
efficient way to maintain the highest ice cube usage safety.
ICM production units boast highly advanced technologies and
performance, with:
• New concept air filter, in contact with the condenser; owing to its
position, air flow inside the technical part of the machine is kept unaltered,
and removal for periodical cleaning is facilitated. To avoid progressive
reduction of ice production capacity, the air condenser must be kept free
from dust accumulation. KW proposes an air filter placed close to the
condenser. Simple and efficient, the filter can be easily removed directly
from the front panel: when the “clean me” warning light turns on, it will only
take a minute to clean it thoroughly under running water.
• Hygienic ice scoop holder: the best way to prevent contamination of the
ice flakes is to avoid bacterial proliferation on surfaces in contact with the
ice, and in particular on the scoop. This is why it is important to store the ice
scoop in a clean place. The scoop holder inside the container is sanitised by
the new sanitation system, to scoop out ice quickly and hygienically.
• Energy Saving System: this system optimises production cycle efficiency,
improving ice quality
and reducing operation costs.
Green ICE
ICM (ice cube production units)
Model
24h-production
Capacity Kg.
reservoir
External
measurements (WXDXH)
Power Kw
Power supply
Weight
ICM 22
Kg. 24
9
38x60x64
0,40
V 230/Hz50
Kg. 40
ICM 32
Kg. 32
12,5
38x60x83
0,40
V 230/Hz50
Kg. 40
ICM 42
Kg. 38
19
53x60x91
0,48
V 230/Hz50
Kg. 50
ICM 52
Kg. 50
23
53x60x97
0,55
V 230/Hz50
Kg. 52
ICM 72
Kg. 71
34
68x60x105
0,95
V400/3/Hz50
Kg. 72
ICM 82
Kg. 83
48
68x60x112
0,70
V400/3/Hz50
Kg. 78
ICM 150
Kg. 145
70
108x72x113
1,1
V400/3/Hz50
Kg. 107
K W A P PA R E C C H I S C I E N T I F I C I
161
= min./max temperature alarm
Contacts:
Managing Director: [email protected]
Technical Production Manager: [email protected]
Sales Manager: [email protected]
Tender Commercial Office: [email protected]
International Sales Manager: [email protected]
Technical Support & Spare Parts: [email protected]
Service line: [email protected]
Delivery Office: [email protected]
Administration: [email protected]
= Internal light
= DATA LOGGER function
= energy failure alarm
= Alarm broken down probe
= Open door alarm
= Lock
= Disaster Ricovery / Safety Control
= Temperature recorder
KW Apparecchi Scientifici, taking into consideration the non change of the
principal characteristics of products, has the right o carry out modifications on
its products, without prior notice, that it deems necessary.
This catalogue is on an informative and illustrative basis, the quality of the
images and the contents may have come under alterations during printing
= Wheels
Cold storage
equipment
Incubation and
microbiological
test equipment
Ovens, drying
and sterilizing
equipment
ISO 9001:2008
180
Maintenance,
IQ,OQ,PQ, hardware
and software
for equipment
management
ISO 13485:2003
Medical
devices for
transfusion centres
ISO 14001:2004
OHSAS 18001 2007
KW APPARECCHI SCIENTIFICI s.r.l. • 53035 Monteriggioni (SI) • Via della Resistenza, 119 • Tel. +39 0577 309143 / 309145
www.kwkw.it • [email protected] • [email protected]