|
ramic
all ce need
u
all yo
Adhesive 1 mm crown
Minimally invasive crown preparation for lithium disilicate glass-ceramic
Description
®
NEW Years of clinical experience have shown that the high strength of IPS e.max lithium disilicate of
500 MPa* in combination with adhesive cementation permit a crown layer thickness of at least
1 millimetre.
Indication
Full-contour anterior and posterior crowns
Contraindications
– Layer thicknesses below 1 mm
– Preparations with sharp edges
– Preparations without anatomical support and with irregular layer thicknesses
– Conventional and self-adhesive cementation
– Build-up materials other than composite
–Bruxism
– Lack of canine guidance
–Bridges
– Crowns on implants
Preparation guidelines
Crown preparation
for adhesive cementation
1.0
1.0
1.0
NEW
Anterior crown preparation
for adhesive cementation
NEW
1.0
1.0
1.0
1.0
10–30°
1.0
1.0
1.0
1.0
1.0
1.0
− Reduce the anatomical shape and observe the
− Reduce the anatomical shape and
stipulated minimum layer thickness. Circular
observe the stipulated minimum layer
shoulder preparation with rounded inner edges
thickness. Circular shoulder preparation
and/or chamfer preparation. Width of the circular
with rounded inner edges and/or chamfer
shoulder/chamfer at least 1.0 mm.
preparation. Width of the circular
– Reduce the incisal crown third by at least 1 mm.
shoulder/chamfer at least 1.0 mm.
– Reduce the vestibular and/or oral area by at least
Reduce the occlusal crown third by
1 mm.
1 mm.
– Reduce the vestibular and/or oral area
by 1 mm.
Adhese® Universal
The universal adhesive
Adhesive cementation
Monobond Etch & Prime®
Etch and prime in one easy step
**
Variolink® Esthetic
The esthetic luting composite
* mean biaxial flexural strength over 10 years (IPS e.max CAD 530 MPa, IPS e.max Press 470 MPa). Source: R&D Ivoclar Vivadent AG, Schaan, Liechtenstein
** O. Brix, Germany
Rx ONLY
For dental use only!
Manufacturer:
Ivoclar Vivadent AG, 9494 Schaan, Liechtenstein
www.ivoclarvivadent.com
Date information prepared: 2016-11-14, Rev. 0
see instructions
EN