Ordering Information
Thermoplastic
Splinting Materials
Ordering Information
Order Description
Size
Code
Unit of
Measure
Orthoplast® Thermoplastic Sheets
Order Description
Size
Code
Unit of
Measure
Accessories
72312-00
Non-perforated
45cm x 60cm
4 per case
72295-07
Adhesive Fleece Liner
3cm x 13.7m
1x1
72312-01
Perforated
90cm x 60cm
2 per case
72295-06
Terry Cloth and Foam Liner
58cm x 100cm
1 x 1
72295-05
Adhesive Felt Liner
58cm x 100cm
1x1
72295-00
Adhesive Hook Fabric
2.5cm x 9.1m
1x1
Orthoplast® II Thermoplastic Sheets
72323-00
Non-perforated
45cm x 60cm
4 per case
72295-01
Stretch Loop
2.5cm x 13.7m
1x1
72323-01
Perforated
90cm x 60cm
2 per case
72295-02
Adhesive Hook Fabric
5cm x 9.1m
1x1
72295-03
Stretch Loop
5cm x 13.7m
1x1
72308-00
Thumb Spica Liner
7.5cm Short Arm 1 x 10
Orthoplast® Memory Thermoplastic Sheets
72312-06
1.6mm Non-perforated
45cm x 60cm
2 per case
72308-01
Thumb Spica Liner
7.5cm Long Arm 1 x 10
72312-07
1.6mm Perforated
45cm x 60cm
2 per case
72308-02
Thumb Spica Liner
5cm Short Arm
1 x 10
72312-08
2.4mm Non-Perforated
45cm x 60cm
2 per case
72308-03
Thumb Spica Liner
5cm Long Arm
1 x 10
72312-09
2.4mm Perforated
45cm x 60cm
2 per case
72312-10
3.2mm Non-Perforated
45cm x 60cm
2 per case
72312-11
3.2mm Perforated
45cm x 60cm
2 per case
• Orthoplast®
• Orthoplast® II
• Orthoplast®
Memory
BSN medical Ltd. P.O. Box 258, Willerby, Hull HU10 6WT
Tel: 01482 670100 Fax: 01482 670111
www.bsnmedical.co.uk Email: [email protected]
59192
RN/ORTHOSS/00193/1206
© 2006 BSN medical Ltd.
REV 12/06
The combined durability, mouldability and cohesive excellence of the Orthoplast® range has made it one of the most widely used thermoplastic splinting materials.
Orthoplast®
Orthoplast® Memory
Orthoplast® II
PRODUCT BENEFITS
PRODUCT BENEFITS
PRODUCT BENEFITS
Resistant to over-stretching
Made from polycaprolactone material
100% Elastic Memory
• Retains sufficient elasticity during application to
achieve optimum moulding and comformability
• Excellent conformability and mouldability
• E
nsures ability to return to its original sheet
form
• P
articularly suited for the construction of hand splints
that are invariably of a more intricate nature and
design
• Easy and forgiving to handle when in use
The material can be riveted, strapped, bonded and
strengthened
Self-adhering when heated
• Edges trim and finish well
PRODUCT CHARACTERISTICS
• F
or use with larger applications, such as fracture
bracing and lower limb treatment where strength and
durability are a necessity
•May be used to produce a comprehensive range of
products and functional braces
• Can be used in both a water bath or with dry heat
•Heating time is around 2 minutes at a temperature of
70-75˚ C/160-170˚ F
• Suitable for serial splinting
Excellent drape for upper body extremities
• Offers multi-functional capability
• Rubber based synthetic
• Makes it readily remouldable
Translucent appearance on reaching activation
temperature
• D
isplays moderate yet controllable stretch characteristics
Ideal for use
with larger
applications
• A
llows the material to conform to the body contours
without wrinkling
PRODUCT CHARACTERISTICS
• Ideal for use in upper limb splinting applications where
conformability and mouldability are of paramount
importance
Particularly suited
for the construction
of hand splints
• Readily cut or trimmed with scissors, the edges become
self-finishing
•Heating time is around 1-2 minutes at a temperature of
65-70˚ C/140-158˚ F
• A
llows for precise positioning of the material
on the area to be covered
• Prevents accidental self bonding after heating
PRODUCT CHARACTERISTICS
• Ideally suited for serial splinting and splints for
both the upper and lower limbs
• Low temperature thermoplastic
• Edges are self-finishing
• Working time is 3-4 minutes
•Heating time is 1-2 minutes at a temperature of
60-70˚ C/140-158˚ F
• Exists in perforated and non-perforated versions
• Working time is 3-4 minutes
• Working time is 5-8 minutes
Ideally suited
for serial
splinting
A protective coating on both sides
3 Thickness Variations:
1.6mm
Ideal for children, hand or finger splints
• Exists in perforated and non-perforated versions
• Exists in perforated and non-perforated versions
Available in 2 Variations:
2.4mm
Ideal for hand and wrist
3.2mm
Ideal for upper and lower limb
• NON-PERFORATED Excellent rigidity and minimal resistance to stretch
• PERFORATED Allows air circulation whilst retaining rigidity