QDS BELT REELER
TO SUIT 913, 130 & ED10 LHD
DATA SHEET: A2U913-850013 Rev.: 5
390
1335
2660
2165
1765
2260
1600 WIDE
1246
1200 WIDE
150
150
Date: 14/10/2004 Page 1 of 2
MAX DRUM
Ø2000
1700
MAXIMUM DRUM & BELT WEIGHT
LIFT ARMS
LOWERED
LIFT ARMS
ED10
5500kg
4000kg
130
5500kg
4000kg
913
3200kg
2500kg
RAISED
2236 (130)
135 (130)
125 (913)
2486 (ED10)
2625 (130)
2175 (913)
PARKED POSITION
C.G DRUM & REELER
APPROX 6560kg LOADED
3235 (130)
DIMENSIONS ARE APPROXIMATE AND APPLY ONLY TO STANDARD MACHINES
VA Eimco Australia Pty Limited
A.C.N 070 973 330
PO BOX 595 Raymond Terrace NSW 2324
Old Punt Road, Tomago NSW 2322
Ph: +61 2 4985 2625 Fax: +61 2 4985 2699
PO Box 1346 Emerald QLD 4720
13 Industrial Ave, Emerald Qld 4720
Ph: +61 7 4982 4664 Fax: +61 7 4982 4667
QDS BELT REELER
TO SUIT 913, 130 & ED10 LHD
DATA SHEET: A2U913-850013 Rev.: 5
Date: 14/10/2004 Page 2 of 2
DRIVE UNIT :
Hydraulic Gear Motor Through Planetary Reducer
OUTPUT SPEED :
28 RPM @ 151 l/min
MAXIMUM OUTPUT TORQUE :
8900 Nm (913 & 130)
10400 Nm (ED10)
SYSTEM PRESSURE :
13.79 MPa (913 & 130)
17.5 MPa (ED10)
BELT PULL. :
100 mm Radius
250 mm Radius
500 mm Radius
750 mm Radius
1000 mm Radius
913 & 130
89 kN
35 Kn
18 kN
12 kN
9 kN
ED10
104 kN
41 kN
21 kN
14 kN
10 kN
MAXIMUM BELT CAPACITY :
Assume Steel Cord Belt @ 1200kg/m3
Belt Thickness (mm)
10
12
14
16
18
20
ED10 & 130
Reeler Capacity (m)
286
238
204
179
159
143
VA Eimco Australia Pty Limited
A.C.N 070 973 330
913
Reeler Capacity (m)
167
139
119
104
92
83
PO BOX 595 Raymond Terrace NSW 2324
Old Punt Road, Tomago NSW 2322
Ph: +61 2 4985 2625 Fax: +61 2 4985 2699
PO Box 1346 Emerald QLD 4720
13 Industrial Ave, Emerald Qld 4720
Ph: +61 7 4982 4664 Fax: +61 7 4982 4667
QDS BELT REELER
TO SUIT 913, 130 & ED10 LHD
DATA SHEET: A2U913-850013 Rev.: 5
Date: 14/10/2004 Page 3 of 2
WARNING
Overloading of lifting equipment may cause personal injury, death or property
damage. Due to configuration changes or options requested, weights stated above
can vary by up to 20%. Voest Alpine Mining & Tunnelling recommend that the safe
working load for this machine is the minimum sling capacity of either those required
by government regulation, safety practices or laws in effect at the customers
location. Removal of a protective structure could cause serious injury or death.
Replacement with correctly torqued Grade 8 fasteners is mandatory.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Copyright
The drawings, information and graphics contained in this document are and shall always remain the property of Voest Alpine Mining & Tunnelling Pty Limited, and
shall not be made public or used directly or indirectly in any way detrimental to our interests. No person shall amend or alter the contents or format of this
document in any way without written permission from Voest Alpine Mining & Tunnelling Pty Limited. However, where permission is granted, Voest Alpine Mining &
Tunnelling Pty Limited will not take responsibility for the accuracy of any text, graphics or parts thereof extracted or cut from this document and inserted into any
other form or source.
Disclaimer
Voest Alpine Mining & Tunnelling Pty Limited expressly disclaim all and any liability to any person, whether a purchaser of this document or not, in respect of
anything and or the consequences of anything done or omitted to be done by any such person in reliance, whether whole or partial upon the whole or any part of
the contents of this document.
VA Eimco Australia Pty Limited
A.C.N 070 973 330
PO BOX 595 Raymond Terrace NSW 2324
Old Punt Road, Tomago NSW 2322
Ph: +61 2 4985 2625 Fax: +61 2 4985 2699
PO Box 1346 Emerald QLD 4720
13 Industrial Ave, Emerald Qld 4720
Ph: +61 7 4982 4664 Fax: +61 7 4982 4667