Hy-Brid
Lifts
by Custom Equipment
HB-830
TM
Specifications & Features
Overall
LOW FLOOR LOADING
LOW PLATFORM HEIGHT, FULL SWING GATE
Extremely lightweight design allows for use on delicate or sensitive
surfaces.
Easy access to platform makes fatigue, neck and knee strain a
thing of the past
Virtually Maintenance Free
ZERO TURN RADIUS
Greater precision when driving the lift, ability to access previously
inaccessible areas
Improved life cycle cost of ownership
Longer run time
Work up to 16 hours on a single charge
Railings
Steel slideout extension
Supported on midrail, no platform rollers eliminates jamming
rounded Modular rails
Unique rail technology provides greater strength and durability
against wear and tear on the jobsite; pocket joints for easy railing
removal or replacement
Scissors
Slide-off Upper Control Box
Secure, yet easy removal allows greater operator mobility on platform
SINGLE HYDRAULIC LIFT CYLINDER
Reduces scissor sway
Only two hydraulic connections mean less leak points and
maintenance to worry about
solid scissor stack
velocity fuse on cylinder end
OVERSIZED 1.25” (3.18 cm) PINS
Prevents descent if hydraulic line failure occurs
Greater operator comfort, robust
base
FULL SIZE FORK POCKETS ON BOTH ENDS
Rounded corners
Better safety and stability when lifting
Minimizes surface contact damage if operator hits a wall
Counter-rotating wheels
direct drive dc wheel motors
Prevents damage to sensitive flooring; dual front wheel design
Quiet, efficient, and low amp draw
NON-MARKING WHEELS
mechanical pothole deployment in base
Pevents surface scuffs
Failsafe, simple
Specs
heights
US
Metric
Platform Working Height
14 ft
4.27 m
Platform Capacity (total)
Platform Height (max.)
8 ft
2.44 m
Platform Height (min.)
26.6 in
Ground Clearance
Stowed Height
US
Metric
500 lb
226.8 kg
Rated Occupancy
1 person
1 person
0.68 m
Weight
1080 lb
490 kg
2 in
5.1 cm
Inside Turning Radius
0 in
0 cm
69.25 in
1.76 m
Lift Speed up/down
10/10 sec
10/10 sec
dimensions
Performance
Floor Loading
Overall Width
30 in
0.76 m
Min. Wheel Load
68.88 psi
474.88 kPa
Overall Length
47 in
1.19 m
Max. Wheel Load
100.13 psi
690.34 kPa
Platform Width
25 in
0.64 m
Min. Machine Load
110.2 psf
5.28 kPa
Platform Length
44.5 in
1.13 m
Max. Machine Load
160.2 psf
7.67 kPa
19 in
0.48 m
Platform Extension - ANSI
1-262-644-1300
This brochure is for illustrative purposes only and based on the latest information available
at the time of printing. Hy-Brid Lifts reserves the right to make changes at any time, without
notice, to specifications, standard and optional equipment. Hy-Brid Lifts™ is a trademark of
Custom Equipment, Inc. © Custom Equipment, Inc. All rights reserved.
Part No. L01-03-0113
www.hybridlifts.com
Hy-Brid Lifts
™