Mounting brackets for
Z45/75, Z3N 75
ZHZ 500/600
and Z 100
Z 45/75
Tow hook
approval
94/20/EC
450/750kgs lifts
Truck model
Mercedes
Sprinter
&
Volkswagen
Crafter
Only as spare part
Pre 2006
56784TL
3250
Year of
design
3500
Post 2006
Weight kgs
5000
<− 2013
Ford
Transit
2014−>
Peugeot Boxer
Citroen Jumper
Fiat Ducato
(European chassie)
Iveco Daily
Renault Master
Opel Movano
Nissan NV400
Wheelbase (mm)
Year of
design
Wheelbase (mm)
No
Yes
With extension?
No
MB Sprinter 300 / VW Crafter
Wheelbase 3665
Single cab, double cab
Art. No: 53932
MB Sprinter 300 / VW Crafter
Wheelbase 4325
Single cab, double cab
Art. No: 53926
MB Sprinter 500 / VW Crafter
Wheelbase 3665
Double wheel
Art. No: 53898
MB Sprinter 500 / VW Crafter
Wheelbase 4325
Double wheel
Art. No: 56015
Toyota Dyna
75038TL
3665
53932TL
Ok
4325
53926TL
Ok
3665
53898TL
Ok
4325
56015TL
Ok
53646TL
Ok
53649TL
Ok
L4
L1, L2 & L3
74215TL
53649TL
Ok
Only as spare part
<− 2006
56095TL
Old design
2007 −>
New design
Short overhang
57336TL
Long overhang
57337TL
53642TL
No
Adapt for tow hook?
Yes, only for 3.5 ton trucks
56418TL
<− 2006
53650TL
2010 ->
57378TL
Ok
100, 150
Art. No: 56233
Ok
Recommended 53642TL
Renault Maxity
Renault Mascot
Nissan Cabstar
Isuzu N & F
53650TL
57411TL
100 &150 Overhang?
Toyota Dyna
MB Sprinter 300 / VW Crafter
Wheelbase 3250
Art. No: 56784
spec short body
Yes
With extension?
Mounting brackets for Z 45/75
model?
Long (1700mm)
56233TL
short (1020mm)
53650TL
Ok
Art. No: 57336
53642TL
200
3665
55557TL
Ok
4325
55573TL
Ok
VW T5 / T6
w. Floby bodies
53742TL
Ok
VW T6 Floby
75124TL
Ok
VW T5
56908TL
Ok
VW T6
75119TL
Ok
WV Crafter med Weight kgs
orginal board
3500
Wheelbase (mm)
Ford Transit 330/350, 260/300
With Ford extension 2013
Art. No: 53646
European chassis vertical
Citroen Jumper, Fiat Ducato, Peugeot Boxer
Short overhang or long overhang with long body
Ford Transit L4
2014
Art. No: 74215TL
Ford Transit 330/350, 260/300
Without extension
Art. No: 53649
Always check the body building instruction
from the truck supplier.
Brackets marked “only as sparepart”
Not for new installation on trucks because not
updated underrun protection the demands for today1
2
Tow hook for Z45 / 75
Mounting brackets for Z 45/75
Eurochassie horizontal
Citroen Jumper, Fiat Ducato, Peugeot Boxer
Long overhang
Art. No: 57337
European chassis
Citroen Jumper / Fiat Ducato / Peugeot Boxer
Art. No: 56095
Renault Master / Opel Movano
Nissan NV 400
Year of design 2010 →
Art. No: 57378
On the Z45/75 range it is often possible to install a tow hook. It is required however that
the brackets which are installed on the vehicle chassis are approved and certified. Please
refer to the latest version of the “bracket tree” to check whether the model you are
interested is included. The lift and brackets must be installed according to ZEPRO´s
instructions in order for the approval to be valid. The weight of the trailer that is allowed
may depend on the positioning of the tow hook.
Iveco with tow hook
Art. No: 56418
Only reinforcement kit Art.No 71232TL
Z
ZN
ZL
Various components of the tow hook system
The tow hook is delivered with a 50 mm ball as standard, however, it is possible to order
a combi system with a 50 mm ball and pin. This shifts the ball centre 15 mm rearwards.
Universal bracket
Iveco Daily exept tow hook / Renault
Mascot
Art. No: 53642
Universal bracket
For the ZN model only, ZEPRO can offer an extension.
Art. No: 53650
50 mm ball
Universal bracket for C frame
Art. No: 57411
Support plate for sub frame
Art. No: 74213TL
VW T5 / T6
Only for Swedish Floby bodies
Art. No: 53742
VW T5 / T6
With spare wheel bracket
Art. No: 56908
3
50mm ball and pin
Extension plate
Adapter Triplex
Extension only for ZN
Triplex
4
Mounting brackets Z3N
Z3N 75
750 kg lift
Truck model
Mercedes
Sprinter 3xx
&
Volkswagen
Crafter 35
Ford
Transit L4
Fiat Ducato
Peugeot Boxer
Citroen Jumper
Mercedes Sprinter 4325 and 3665
Volkswagen Crafter 4325 and 3665
Art. No: 74376TL
Year of
design
Year of
design
Year of
design
Wheelbase (mm)
2006−>
4325
L4
2014−>
74376TL
74819TL
L1 L2 L3
In progress
L5
In progress
L1 - L4
2007−>
Iveco Daily
35
Renault Master
Nissan NV400
Opel Movano
3665
75035TL
74645TL
Year of
design
2010−>
Single wheels back
Canter Fuso
3,5 t
Iveco Daily
Art. No: 74645TL
Ford Transit L4
Art. No: 74819TL
2014
Renault Master / Opel Movano
Nissan NV 400
Year 2010
Art. No: 74840TL
Canter Fuso
Art. No: 75003TL
Fiat Ducato
Peugeot Boxer
Citroen Jumper
Art. No: 75035TL
74840TL
75003TL
8
5
6
Z 100
ZHZ 500 / 600
1000 kg lift
500 / 600 kg lifts
Truck model
Truck model
3500
Mercedes
Sprinter /
Volkswagen
Crafter
3250
In progress
3665
73167TL
4325
2006−>
5000
och
4600
Super
Singel
Volkswagen T5
(Panel van)
1600
73169TL
2000
73169TL
3665
4325
Overhang (mm)
1600
In progress
2000
73169TL
Weight (kgs)
5000
Wheelbase (mm)
Mercedes
Vario
Model
3665
56479TL
4325
56478TL
600 & 800
56476TL
Mercedes
Atego
75221TL
<− 2014 With extension
In progress
Ford
Transit
Model
Yes
No
430, 460, 470
2014−> With extension
Yes
No
56480TL
L4
L1, L2, L3
Not allowed to be equipped with taillift
RWD
<− 2013
Ford
Transit
Mercedes
Sprinter
3500
In progress
FWD
73029TL
Ford Transit
Custom
2013−>
Jumbo
RWD/FWD 4x4
2014−>
Peugeot
Boxer
Fiat
Ducato
Citroën
Jumper/
Relay heavy
<− 2010
FWD
Renault Master
Opel Movano
Nissan NV400/
Interstar
5t, 5,5t & 6,5t
56476TL
76013TL
Nissan
Atleon
56476TL
72807TL
L4
76013TL
L1, L2, L3
72807TL
76013TL
74451TL
FWD
74452TL
RWD
75236TL
In progress
Iveco
Daily
Canter Fuso
Model
40C, 50C, 65C &
56476TL
Iveco
Eurocargo
56476TL
MAN
TGL
56476TL
Isuzu
N-Serie
Model
N50, N62 &
56476TL
Isuzu
F-serie
56476TL
DAF
LF
56476TL
Toyota
Dyna
Other
vehicles with
C-frame
Model
200
Always check the body building instruction from the truck supplier.
Maximum 12 tons
8
7
56478TL
56476TL
2010 −>
Iveco Daily
4325
Nissan
Cabstar
L1, L2, L3
L4
Model
56479TL
72807TL
75018TL
2007 −>
Renault
Mascott
3665
56476TL
RWD
2007 −>
Wheelbase (mm)
Renault
Maxity
74914TL
L4
5000
56477TL
56476TL
FWD
2007 −>
Weight (kgs)
75046TL
Renault
Midlum
Not allowed to be equipped with taillift
L1, L2, L3
Volkswagen
Crafter
56477TL
56476TL
56476TL
Zepro
market leader in tail lifts
ZEPRO is a Swedish manufacturer of tail lifts with over
40 years of experience. Designed to overcome the
arctic winters of northern Europe, desert heat and
tropical moisture, our tail lifts are made to always deliver – no matter where you are.
Thanks to high-quality materials and components,
ZEPRO has become a leading brand known for dura-
bility, reliability, a wide product range and a global service network. The company is a part of HIAB and Cargotec, the leading supplier of load handling solutions
for professional users.
Nobody can match our quality and precision. In the
world of tail lifts, ZEPRO is second to none.
2017-04-24
Z-Lyften Produktion AB
P.O. Box 31
641 21 Katrineholm, Sweden
Tel.: + 46 (0)150-48 95 50
Fax: + 46 (0)150 48 95 51
9
zepro.com