FRAMELESS PRODUCT SPECIFICATIONS GUIDE
REV 16_20_07
LANZ CABINET ENVIRONMENTAL STATEMENT
Lanz Cabinets believes that we are only guests on this earth and has practiced being an
environmentally friendly company long before it was vogue. We are committed to continuous
improvement and conducting business in a fashion that safeguards the earth, our employees,
customers and neighbors from environmental hazards.
We dedicate efforts to make environmentally friendly the norm rather than the exception—we
include Environmental Management in our Quality Manual and it is reflected in our Core Values,
“We will be sensitive to the environment by promoting the use of renewable resources, recyclable
products and sustainable practices."
Our management, engineering and purchasing teams are constantly researching leading edge
technologies for ways to conserve energy and reduce the impact of our hazardous and nonhazardous waste streams. Where we do have waste, we look for ways to recycle, and if the waste
needs to be disposed of, we choose the way that has the least impact on our earth.
We are active members of the Kitchen Cabinet Manufacturers Association (KCMA), and certified
adherents to their Environmental Stewardship Program (ESP).
KCMA ESP certification requires a company to be certified
annually and show compliance in the following areas: air quality,
product resource management, process resource management,
environmental stewardship, and community relations.
FRAMELESS PRODUCT SPECIFICATIONS GUIDE
A
C
B
D
E
G
F
A
Full height pantry applied finished end
E
Easy reach or lazy susan cabinet
B
Deep refrigerator cabinet
F
Finished toe kick
C
Deep refrigerator panel
G
Base applied finished end
D
Matching integrated finished ends
FRAMELESS PRODUCT SPECIFICATIONS GUIDE
TABLE OF CONTENTS
Frameless Base Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Dimensions & Toe-kick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Frameless Wall Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Frameless Tall Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Dimensions & Toe-kick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Frameless Vanity Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Dimensions & Toe-kick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Frameless ADA Compliant Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Overview & Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
RDT Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Standard Frameless Operational Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Common Frameless Optional Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Standard Frameless Cabinet Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Frameless Door & Applied End Material Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Cabinet Care Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Warranty Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
FRAMELESS BASE CABINETS
A
B
I
F
K
H
L
J
C
G
D
E
REV 16_20_07
M
A
3/4" Doweled top stretchers—front and back
B
Metal box drawer construction (double wall soft close full extension option available)
C
5/8" Full depth adjustable shelf
D
All doors full overlay design
E
5/8" Toe kick material provided at front of leg levelers
F
Doweled engineered panel and rail joinery
G
5/8" Bottom panel
H
1/4" Captured backs in bases (except sinks)
I
5/8" Drawer bottoms and backs
J
3/4" Field applied finished end panel (match to door panel)
K
1mm PVC solid color case tape coordinated with finished case selection
L
Reference door style subsection detail for typical materials provided at back of door
M
Reference door style subsection detail for typical materials provided at back of applied finished ends
PRODUCT SPECIFICATIONS GUIDE | Frameless Base Cabinets | Overview
5
BASE CABINET DIMENSIONS
24"
24 13/16"
APPLIED
FINISH END
34 1/2"
UNFINISHED
END
VARIES IN WIDTH
TOP VIEW
24" W MAX
FRONT VIEW
TOE KICK DETAIL
34 1/2"
4 1/2"
•Finished toe kick material to compliment
doors and finished ends
3 1/8"
24" W CASE
24
" W TO DOOR FACE
PRODUCT SPECIFICATIONS GUIDE | Frameless Base Cabinets | Dimensions & Toe-kick
REV 16_20_07
6
13/16
BASE SINGLE FULL HEIGHT
BASE PAIR FULL HEIGHT
24" W UP TO 36" W MAX
9" W UP TO 24" W MAX
BASE SINGLE DRAWER
BASE STANDARD DRAWER
REV 16_20_07
9" W UP TO 24" W MAX
PRODUCT SPECIFICATIONS GUIDE | Frameless Base Cabinets | Configurations
24" W UP TO 30" W MAX
7
BASE STANDARD (2) DRAWER
BASE (2) DRAWER COOK TOP
FALSE FRONT
30" W UP TO 36" W MAX
BASE (4) DRAWER STACK
30" W UP TO 36" W MAX
BASE (3) DRAWER STACK
EQUAL HEIGHT
(EQ)
EQ
EQ
EQ
EQ
9" W UP TO 24" W MAX
PRODUCT SPECIFICATIONS GUIDE | Frameless Base Cabinets | Configurations
REV 16_20_07
8
9" W UP TO 24" W MAX
BLIND BASE WITH BREADBOARD
BREADBOARD IS
CONCEALED BEHIND
DRAWER FRONT
24
30" W UP TO 36" W MAX
24
13/16
13/16
BREADBOARD
SITS IN METAL
U-CHANNEL GUIDE
"
" TO DOOR FACE
SECTION VIEW
BASE SINGLE DRAWER BREADBOARD
BASE 3 DRAWER BREADBOARD
EQ
EQ
REV 16_20_07
9" W UP TO 24" W MAX
PRODUCT SPECIFICATIONS GUIDE | Frameless Base Cabinets | Configurations
9" W UP TO 24" W MAX
9
BASE POTS AND PANS
EQ
EQ
30" W UP TO 36" W MAX
SINK BASE FULL HEIGHT
SINK BASE FALSE FRONT
FALSE FRONT
24" W UP TO 36" W MAX
PRODUCT SPECIFICATIONS GUIDE | Frameless Base Cabinets | Configurations
REV 16_20_07
10
24" W UP TO 36" W MAX
BASE BLIND SINGLE DOOR
30" W UP TO 36" W MAX
BASE BLIND DOOR AND DRAWER
REV 16_20_07
30" W UP TO 36" W MAX
PRODUCT SPECIFICATIONS GUIDE | Frameless Base Cabinets | Blind Configurations
11
BASE CORNER SINK
FULL TOP
59
1/8
"
21
28
1/4
7/8
"
"
24"
42"
21
32"
7/8
"
24
24"
3/4
"
24"
24"
24
3/4
" WIDE
42"
PLAN VIEW
BASE CORNER EZ REACH
32"
20"
32"
32"
32"
20"
PRODUCT SPECIFICATIONS GUIDE | Frameless Base Cabinets | Corner Configurations
REV 16_20_07
12
BASE CORNER W/LAZY SUSAN
BLIND BASE CABINETS
60"
24"
60"
12"
12"
12"
RIGHT BLIND BASE
3/4
"
3
3/4
24"
LEFT BLIND BASE
24"
24"
3
12"
"
FILLER
FILLER
ADJACENT
CABINET
21"
21"
ADJACENT
CABINET
BASE EZ AND LAZY SUSAN CLEARANCE
36"
32"
4" VOID
36"
32"
4" VOID
TYPICAL ADJOINING
BASE CABINET
REV 16_20_07
24"
PRODUCT SPECIFICATIONS GUIDE | Frameless Base Cabinets | Details
13
VOID CORNER FILLERS
3
5/8
"
23
22"
1/4
"
1
24"
VOID CORNER
3"
2
•Void corner fillers
•3 3/4" stock
•Trim to one side to 3" wide reveal
RANGE FILLER
PLAN VIEW
3/4
18"
61
1/2
"
3/4
31
1/2
"
"
18"
"
96"
34
1/2
3/4" X 4" FINISHED SPACERS
TO MATCH DOOR FINISH
INSTALLED FLUSH TO FACE OF CASE
"
3/4
18"
3/4
31
1/2
"
"
18"
PRODUCT SPECIFICATIONS GUIDE | Frameless Base Cabinets | Details
REV 16_20_07
14
"
FRAMELESS WALL CABINETS
A
B
G
C
F
H
D
E
I
K
J
REV 16_20_07
L
A
5/8" Top panel
B
1/4" Captured back
C
Self locking shelf pins
D
6-Way adjustable clip on 110 degree hinge opening (soft close option)
E
5/8" Bottom panel
F
5/8" Side panels
G
5/8" Full-depth adjustable shelves
H
3/4" Field applied finished end panel (match to door finish)
I
1mm PVC solid color case tape coordinated with finished case selection
J
White laminate typical at exposed bottom of wall cabinets
K
Reference door style subsection detail for typical materials provided at back of door
L
Reference door style subsection detail for typical materials provided at back of applied finish ends
PRODUCT SPECIFICATIONS GUIDE | Frameless Wall Cabinets | Overview
15
TYPICAL WALL CABINET– SECTION VIEW
12
13/16
"
TO FACE OF DOOR
4
1/2
CONCEALED
NAILER
"
11"
INSIDE
CLEAR
DEPTH
24"
30"
36"
4
1/2
"
CONCEALED
NAILER
18"
12"
CASE DEPTH
WALL UNDERCABINET LIGHTING DETAILS– SECTION VIEW
DETAIL
DETAIL
36"
CLEATING ATTACHED TO
BOTTOM FROM UNDERSIDE
WITH BRAD NAILS
12"
1 3/4" VALANCE ATTACHED
TO UNDERSIDE “IN FIELD"
WITH CLEATING
DOORS EXTEND 1 3/4"
WITH 1 3/4" VALANCE
ATTACHED TO UNDERSIDE
“IN FIELD" WITH CLEATING
PRODUCT SPECIFICATIONS GUIDE | Frameless Wall Cabinets | Dimensions
REV 16_20_07
16
12"
REFRIGERATOR UPPER (12" TO 18"H)
12 13/16" D
W/ APPLIED
FINISHED ENDS
18" TO 24" D
UP TO 36" W MAX
UPPER SINGLE (24"H)
9" W UP TO 24" W MAX
REV 16_20_07
DEEP REFRIGERATOR UPPER (12" TO 18"H)
UP TO 36" W MAX
UPPER SINGLE (30"H)
9" W UP TO 24" W MAX
PRODUCT SPECIFICATIONS GUIDE | Frameless Wall Cabinets | Configurations
17
STANDARD PAIRED UPPER (30"H)
UP TO 36" W MAX
BLIND SINGLE UPPER (30"H)
UP TO 36" W MAX
24" X 24" W
BLIND PAIRED UPPER (30"H)
UP TO 36" W MAX
PRODUCT SPECIFICATIONS GUIDE | Frameless Wall Cabinets | Configurations
REV 16_20_07
18
45 DEGREE CORNER UPPER (30"H)
HORIZONTAL OPEN CASE
VERTICAL OPEN CASE
12" DEEP
12" DEEP
OPEN
FIXED SHELF
OPEN
OPEN
FINISHED CASE TAPE
1/4" FINISHED BACK
CASE TO COMPLIMENT
OPEN DESIGN
FINISHED CASE TAPE
1/4" FINISHED BACK
CASE TO COMPLIMENT
OPEN DESIGN
GLASS WALL CABINET
12
13/16
" DEEP WITH DOOR
REV 16_20_07
• Coordinated finished
interior for glass door
• 1 mm PVC solid color
case tape coordinated
with finish case selection
PRODUCT SPECIFICATIONS GUIDE | Frameless Wall Cabinets | Open Cabinets
19
WALL CABINET WITH LIFT DOOR
PLAN VIEW
*MAXIMUM WIDTH OF LIFT DOOR UPPERS = 36"
LIFT SYSTEM HARDWARE
DUCTED RANGE UPPER
12"
14
1/2
"
12
3/4
"
8
3/4
"
30"
10
1/4
"
OPTIONAL INTERIOR
HOOD VENT COVER
DUCTED BOTTOM DETAIL
PRODUCT SPECIFICATIONS GUIDE | Frameless Wall Cabinets | Details
REV 16_20_07
20
WALL CABINET FILLERS
RIGHT BLIND
WALL CABINET
DOUBLE FILLER
AT CORNERS
FILLER
• Fillers are 5/8" – 3/4" thick
• Provided as “trim to fit” at installation
• Back Fillers are 5/8" – 3/4" thick
• Face fillers provided to match doors
• Both provided as “trim to fit” at installation
CORNER CABINET DETAILS
TOP VIEW 45 DEGREE
WALL CORNER CABINET
DETAIL CONNECTIONS
24"
24"
2
12"
24"
24"
16
3/16
"
1
REV 16_20_07
12"
PRODUCT SPECIFICATIONS GUIDE | Frameless Wall Cabinets | Details
21
REV 16_20_07
22
FRAMELESS TALL CABINETS
EQUAL HEIGHT DOORS
OFFSET HEIGHT DOORS
A
A
B
B
I
I
C
D
D
G
G
C
F
F
H
E
REV 16_20_07
J
H
E
J
A
5/8" Top panel
B
1/4" Captured back
C
Self locking shelf pins
D
6-Way adjustable clip on 110 degree hinge opening (soft close option)
E
5/8" Bottom panel
F
5/8" Full-depth adjustable shelves
G
3/4" Field applied finished end panel (match to door finish)
H
1mm PVC solid color case tape coordinated with finished case selection
I
Reference door style subsection detail for typical materials provided at back of door
J
Reference door style subsection detail for typical materials provided at back of applied finished ends
PRODUCT SPECIFICATIONS GUIDE | Frameless Tall Cabinets | Overview
23
TALL CABINET EQUAL HEIGHT DOORS
24
13/16
"
24"
84"–95"
CASE
DEPTH
APPLIED
FINISH END
PLAN VIEW
4
1/2
"
3 1/8"
VARIES IN WIDTH
UP TO 24"
24"
24 13/16"
TO FACE OF DOORS
ELEVATION
SECTION VIEW
3D TOE VIEW
TALL CABINET OFFSET HEIGHT DOORS
24
13/16
"
24"
CASE
DEPTH
APPLIED
FINISH END
84"–95"
PLAN VIEW
4
VARIES IN WIDTH
UP TO 24"
1/2
"
3 1/8"
24"
24 13/16"
TO FACE OF DOORS
ELEVATION
3D TOE VIEW
PRODUCT SPECIFICATIONS GUIDE | Frameless Tall Cabinets | Dimensions & Toe-kick
REV 16_20_07
24
SECTION VIEW
TALL SINGLE EQUAL DOORS
TALL SINGLE UNEQUAL DOORS
FIXED SHELF
FIXED SHELF
95"H MAX
95" H MAX
24" W MAX
24" W MAX
TALL STANDARD UNEQUAL DOORS
TALL STANDARD EQUAL DOORS
FIXED SHELF
FIXED SHELF
95"H MAX
REV 16_20_07
95"H MAX
24" W UP TO 36" W MAX
PRODUCT SPECIFICATIONS GUIDE | Frameless Tall Cabinets | Configurations
24" W UP TO 36" W MAX
25
TALL SINGLE OVEN
95"H MAX
TALL DOUBLE OVEN
95"H MAX
PRODUCT SPECIFICATIONS GUIDE | Frameless Tall Cabinets | Configurations
REV 16_20_07
26
FRAMELESS VANITY CABINETS
A
B
I
F
K
H
L
J
C
G
D
E
REV 16_20_07
M
A
3/4" Doweled top stretchers—front and back
B
Metal box drawer construction (double wall soft closing full extension option available)
C
5/8" Full depth adjustable shelf
D
All doors full overlay design
E
5/8" Toe kick material provided at front of leg levelers
F
Doweled engineered panel and rail joinery
G
5/8" Bottom panel
H
1/4" Captured backs in bases (except sinks)
I
5/8" Drawer bottoms and backs
J
3/4" Field applied finished end panel (match to door panel)
K
1mm PVC solid color case tape coordinated with finished case selection
L
Reference door style subsection detail for typical materials provided at back of door
M
Reference door style subsection detail for typical materials provided at back of applied finished ends
PRODUCT SPECIFICATIONS GUIDE | Frameless Vanity Cabinets | Overview
27
VANITY BASE DIMENSIONS
UNFINISHED
END
21
13/16
32
1/2
"
21"
"
APPLIED
FINISHED
END
CASE DEPTH
PLAN VIEW
VARIES IN WIDTH
ELEVATION
TOE KICK DETAIL
32
4
1/2
1/2
"
"
3
1/8
•Finished toe kick material compliments
doors and finished ends
"
21"
PRODUCT SPECIFICATIONS GUIDE | Frameless Vanity Cabinets | Dimensions & Toe-kick
REV 16_20_07
28
VANITY SINGLE FULL HEIGHT
VANITY STANDARD FULL HEIGHT
24" W UP TO 36" W MAX
24" W MAX
VANITY SINGLE (1) DRAWER
VANITY STANDARD (1) DRAWER
24" W UP TO 30" W MAX
REV 16_20_07
24" W MAX
PRODUCT SPECIFICATIONS GUIDE | Frameless Vanity Cabinets | Configurations
29
VANITY PAIR STANDARD (2) DRAWER
30" W UP TO 36" W MAX
SINK VANITY FULL HEIGHT
VANITY (3) DRAWER STACK
9" W UP TO 30" W MAX
SINK VANITY FALSE FRONT
FALSE FRONT
24" W UP TO 36" W MAX
PRODUCT SPECIFICATIONS GUIDE | Frameless Vanity Cabinets | Configurations
REV 16_20_07
30
24" W UP TO 36" W MAX
FLOATING (2) DRAWER VANITY
FLOATING FULL HEIGHT VANITY
EQ
21
1/2
21
"
1/2
"
EQ
21"
21"
FLOATING VANITY MOUNTING REQUIREMENTS
FLOATING SINK
MOUNTING BRACKET
BLOCKING
REQUIREMENTS
1/2"
1" 1" 1"
3/4"
3/8"
.250 DIA
1" 2 1/2"
2"
2" X 6" WALL
BLOCKING
BY OTHERS
REQUIRED
3/8"
4"
1"
.250 DIA
1"
1"
1"
4"
10"
5 5/8"
2 1/2"
1"
5
5/8
1/2"
2"
"
10"
• Material is 16GA MS
REV 16_20_07
•Holes are 5mm unless
otherwise stated
PRODUCT SPECIFICATIONS GUIDE | Frameless Vanity Cabinets | Configurations
31
REV 16_20_07
32
FRAMELESS ADA COMPLIANT CABINETS
ADA COMPLIANT KITCHEN SINK BASE
ADA COMPLIANT KITCHEN SINK BASE
FULL HEIGHT DOORS
D
C
B
B
A
A
A
Adaptable for ADA with removable bottom and toe kick
B
Open back eliminates need for cut outs
C
Front fascia positioned behind doors
D
False front height complies to 27"H clearance requirement
24
30"
30"
27" CLEAR
27" CLEAR
4
1/2
4
"
34
1/2
1/2
"
34
"
1/2
"
RDT
Cap Screw
1" Gap
REV 16_20_07
Floor Line
PRODUCT SPECIFICATIONS GUIDE | Frameless ADA Compliant Cabinets | Overview & Dimensions
System
Screw
33
STANDARD RDT KITCHEN SINK FULL HEIGHT
OPTIONAL RDT KITCHEN SINK FALSE FRONT
FALSE FRONT
STANDARD RDT VANITY SINK FULL HEIGHT
OPTIONAL RDT VANITY SINK FALSE FRONT
FALSE FRONT
PRODUCT SPECIFICATIONS GUIDE | Frameless ADA Compliant Cabinets | RDT Configurations
REV 16_20_07
34
RDT KITCHEN AND VANITY CABINET ASSEMBLY
2) Remove doors and hinges
1) Fully assembled cabinet
3) Remove screws from deck and bracket
4) Remove deck and toes
5) Remove brackets
RDT MOUNTING BRACKET
1
1
16
5/16
1/4
"
1/4
"
8/32" THREAD
"
PRODUCT SPECIFICATIONS GUIDE | Frameless ADA Compliant Cabinets | RDT Configurations
35
ADA VANITY SHROUD
ADA KITCHEN SHROUD
21"
24"
23 1/4"
23 1/4"
REMOVABLE KITCHEN OR VANITY
SINK BASE CABINET
SHROUD CROSS SECTION
MOUNTING REQUIREMENTS
• Removable cabinet is
screwed to shroud
• Remove screws to
remove cabinets
SHROUD
2" X 6" WALL
BLOCKING
BY OTHERS
REQUIRED
22"
OPTIONAL
REMOVABLE
SINK BASE
CABINET
24" D MAX
PRODUCT SPECIFICATIONS GUIDE | Frameless ADA Compliant Cabinets | RDT Configurations
REV 16_20_07
36
STANDARD FRAMELESS OPERATIONAL HARDWARE
Unless otherwise specified, the following comes standard with all frameless configurations.
Standard Metal Box Drawer
Color/Material: white metal
Dimensions: 550mm x 86mm (kitchen) | 400mm x 86mm (vanity)
Dynamic load capacity: 25kg (55 lbs)
• 3/4 slide extension
• Self-closing
• Up & down / left & right adjustment
Deep Metal Box Drawer
Color/Material: white metal
Dimensions: 550mm x 150mm (kitchen) | 400mm x 150mm (vanity)
Dynamic load capacity: 25kg (55 lbs)
• 3/4 slide extension
• Self-closing
• Up & down / left & right adjustment
Standard Double-Wall Full Extension Metal Drawer
Color/Material: white metal
Dimensions: 500mm x 84mm (kitchen) | 400mm x 84mm (vanity)
Dynamic load capacity: 40kg (88 lbs)
• Concealed full extension
• Silent system (guarantees smooth running)
• Full adjustment (up, down, left, right)
Deep Double-Wall Full Extension Metal Drawer
REV 16_20_07
Color/Material: white metal
Dimensions: 500mm x 135mm (kitchen) | 400mm x 135mm (vanity)
Dynamic load capacity: 40kg (88 lbs)
• Concealed full extension
• Silent system (guarantees smooth running)
• Full adjustment (up, down, left, right)
PRODUCT SPECIFICATIONS GUIDE | Standard Frameless Operational Hardware
37
Door Hinge
Color/Material: Brushed Nickel
Degree of opening: 110°
6-way book adjustment: • Height +/– 2MM
• Side +/– 2MM
• Depth + 3MM /–2MM
Lift Hinge
Color/Material: Brushed Nickel
Degree of opening: 100°– 107°
• Stay lift system
• Doors swing up and stay out of way
• Doors stay open at any degree and close silently
• Full access to inside of cabinet
Foldable Leg Leveler
Color/Material: Black Plastic
Dimensions: 33/4" min./7" max. high
• Shipped in retracted position
• Easy upright positioning
• Locks in place
Shelf Clip
Color/Material: Clear Plastic
• Locking shelf support with 5MM peg for 5/8" or 3/4" shelf
Decorative Screw Cap Covers
Color/Material: White plastic
Dimensions: 1/2" diameter
• Hides screw heads from view
• Friction fit—pops into place
Cabinet Door Bumpers
Color/Material: Clear Plastic
Dimensions: 1/2" diameter
• Self adhesive, easy peel-and-stick application
• Allows for quiet door closing
• Lessens stress on hinges
PRODUCT SPECIFICATIONS GUIDE | Standard Frameless Operational Hardware
REV 16_20_07
38
COMMON FRAMELESS OPTIONAL ACCESSORIES
Concealed Bread Board
Color/Material: White or black plastic
Dimensions: 9" W (min) to 24" W (max) X 213/4" deep
• Continuous finger pull along front edge
• Glides on metal rails
• Retracts flush to case
• Easy clean
Pull-out Trash Assembly
Color/Material: Gray Plastic
Dimensions: 143/8" W x 191/4"H
• Double 35 QT containers on full extension guides
• 100 lbs. weight capacity
REV 16_20_07
Contact your sales representative to find out more about other accessories
that might be available for your next project.
PRODUCT SPECIFICATIONS GUIDE | Common Frameless Optional Accessories
39
STANDARD FRAMELESS CABINET SPECIFICATIONS
CONSTRUCTION: Glue and dowel engineered panel joinery.
FACE STYLE: Flush overlay. Door and drawer faces overlay
the cases with minimal margins between faces for operating
clearance.
EXPOSED ENDS: 3/4" applied panels, finish surface to match
door material. Panels to be installed in field.
INTERIORS: End panels--5/8" thick composite panel with
white lamination on surface. Tops and Bottoms—5/8" thick
composite panel with white lamination on surface. Backs—1/4"
thick white lamination on MDF substrate. Backs provided
in all cabinets (except sink bases)and are captured in the
grooves of the side panels. Stretchers—3/4" thick composition
panel. Adjustable shelves—5/8" thick composition panel with
white lamination, and .5mm PVC edge banding at face edge.
All adjustable shelves are full depth and meet KCMA load
standards. Locking clips are provided as shelf supports.
FACE EDGEBANDING: 1mm PVC solid color case tape
coordinated with the finished case material selection.
DRAWER SYSTEMS: Metal box drawer construction with
5/8" thick drawer bottoms and backs. Standard drawer
system is three quarter extension, self-closing.
Upgrade available: to double wall softclose full extension
metal drawer system.
HINGES: Fully concealed, 6-way adjustable, clip-on application,
110 degree opening, self closing.
Upgrade available: to soft-close function.
LEG LEVELERS: Base and tall cabinets provided with ABS
plastic, folding leg levelers. Levelers are adjustable from
90mm to 190mm in height and support up to 150kg./leg,
shipped retracted.
TOE KICK: 5/8" matching exposed materials provided at front
of leg levelers, 4 ½" height standard. Toe kicks to be cut to
length and applied in field.
FILLER MATERIALS: 5/8" matching exposed materials
provided in standard widths and full material panel lengths. To
be trimmed for width and cut to length in the field.
QUALITY STANDARD: Lanz frameless cabinetry meets or
exceeds certification standards set by the Kitchen Cabinet
Manufacturers Association (KCMA) and meets the ANSI/
KCMA A161.1-2000 uniform performance and construction
standards for kitchen and vanity cabinets.
AVAILABLE UPGRADES: If you would like further clarification
about any of our products, processes, or possible upgrades,
please contact a Lanz Cabinet Sales Representative.
In keeping with our policy of continuous improvement, Lanz Cabinets reserves the right
to change specifications in design and materials as conditions require.
PRODUCT SPECIFICATIONS GUIDE | Standard Frameless Cabinet Specifications
REV 16_20_07
40
FRAMELESS DOOR & APPLIED END MATERIAL MATRIX
Collection
Door & applied end face material*
Door backer material
Applied end backer
Grandview
Melamine finish
Various patterns**
Matching melamine
Matching melamine
Urban lifestyles
Textured melamine
Various wood patterns**
Matching melamine
Matching melamine
Euroscapes
Rigid thermofoil (rtf)
Various patterns**
White laminate
Complimentary solid
color selected from
10 choices
Atlantic
Rigid thermofoil (rtf)
Arctic white color**
Various routed patterns*
White laminate
White laminate
Cityscapes
Selected wood veneers
Various species**
Matching veneer
Matching veneer
Ecowood
Engineered veneers
Various wood patterns**
Complimentary wood
veneer
Complimentary wood
veneer
Euro Hearthstone
5 piece stick & cope
2" solid wood frame and 1/4" veneer panel
Various species**
N/A
Matching veneer
Euro Pacific
5 piece mitered
2 1/8" solid wood frame and 1/4" veneer panel
Various species**
N/A
Matching veneer
Midtown
5 piece stick & cope
3" solid wood frame and 1/4" veneer panel
Various species**
N/A
Matching veneer
Manhattan
High gloss acrylic
Various colors**
Complimentary color
matte finish
Complimentary color
matte finish
Heritage
Rigid thermofoil (rtf)
Routed face*
Various rtf patterns**
White laminate
Complimentary solid
color selected from
10 choices
*Applied finished ends provided as slab construction-- exposed side to match door material.
**See door collection brochure.
REV 16_20_07
To see our full range of frameless door styles and options, visit:
lanzcabinets.com/frameless.cfm/section/doors-frameless
PRODUCT SPECIFICATIONS GUIDE | Frameless Door & Applied End Material Matrix
41
CABINET CARE INFORMATION
CARE OF YOUR CABINETS
Immediately following installation
LOADING YOUR CABINETS
Shelving
Use clean, soft cloths when cleaning your cabinets. Clean all
surfaces with a damp cloth, drying immediately with a dry cloth.
Failure to dry your cabinet may result in finish damage and
possibly damage the underlying wood.
When our cabinets are mounted by a Lanz Cabinet installer or
mounted according to our instructions, each square foot of shelf
will safely hold up to 25 pounds but not to exceed 450 pounds
total weight per cabinet, when applied slowly, over five minutes.
Furniture treatment
Drawers
To maintain the beauty of your wood cabinets, simply care for
them as you would any fine furniture. Lanz Cabinets uses state of
the art AkzoNobel finishes which do not require wax. But, should
you decide to wax your cabinets, only use a wax that contains no
cleaners. Apply the wax with a clean soft cloth and then buff with
a clean dry cloth.
Drawers will safely hold up to 13 ½ pounds per square foot when
equally distributed.
Hinge/Drawer Guide Maintenance
As with any working part, our hinges or drawer guides may
become loose over time and therefore should be checked
periodically and tightened as necessary.
Normal cleaning
Wipe the cabinet surfaces with a clean, damp cloth and dry with
a clean, dry cloth. Mild soap and water may be used to clean oil,
grease, or other material from the surfaces. All soap residues should
be rinsed from the surfaces using a clean damp cloth. Immediately
dry with a clean dry cloth. Failure to dry your cabinet may result in
finish damage and possible damage of the underlying wood.
Scratches or nicks
These may be hidden using a touch-up furniture polish or marker on
shallow scratches, or by using a color matching wood tone putty on
deeper scratches or nicks. Buffing with a light coat of wax will aid in
blending into the surrounding area.
Thermofoil doors and laminate surfaces
Thermofoil doors and cabinets with laminate surfaces are
manufactured using materials that are designed for easy care.
Years of service and beauty can be maintained by following these
easy care suggestions:
Light cleaning
Clean all spills immediately using a clean soft cloth dampened
with clean water then dry immediately.
Heavier cleaning
Oils, grease and other soils that do not clean with water may be
removed using a solution of mild soap and water. The surface should
be rinsed immediately with a clean, damp cloth and dried thoroughly.
Excessive moisture may have the most detrimental effect on any
fine wood finish. Good furniture such as these cabinets cannot
withstand constant washing or exposure to water. Avoid hanging
dishtowels over doors or placing coffee makers where steam
vents directly onto cabinet surfaces. Constant dampness next to
dishwashers, sinks, and toe-kick areas can cause finish damage
and possibility damage the underlying wood if not dried as it
occurs. Immediately dry off any areas where water has spilled.
Keep all surfaces dry.
Harsh Cleaning Agents
Some cleaning agents, such as ammonia, can damage the finish
of your cabinets. Avoid exposing your cabinets to these and other
potential sources of ammonia-based cleaners, polishes, floor
waxes. Do not wipe your cabinets with a dishcloth as it may contain
soap, detergent, grease, or other household chemicals that may
damage the cabinet finish. Avoid using detergents, strong soaps, or
abrasive cleaners and pads, as they may be harmful to the finish.
Wax
While spray waxes may temporarily increase the sheen of your
cabinets, they will certainly leave build-up, which eventually has to
be removed and may damage the finish. Do not use any wax on
thermofoil doors or laminate surfaces.
PRODUCT SPECIFICATIONS GUIDE | Cabinet Care Information
REV 16_20_07
42
THINGS TO AVOID
Excessive Moisture
LANZ CABINETS WARRANTY POLICY
Lanz Cabinet Shop, Inc. (Seller) hereby agrees and warrants that all products manufactured and sold hereunder by Seller are free from defects
in material and workmanship for a ONE YEAR warranty period from the date of completion. All claims for defective goods must be submitted to
Seller in writing and must specify the defects present in the product. After Seller has had an opportunity to inspect the product, Seller, at his
sole discretion, will either replace or repair the product. This warranty is conditioned on the customer’s proper treatment of the product after
delivery and installation. All implied warranties are limited in duration to one year. Seller’s sole responsibility with respect to the products under
this warranty, any implied warranty or otherwise is as stated herein and Seller shall not be liable for consequential, indirect, or incidental damages.
Some states do not allow limitations on how long implied warranty lasts, or limitations and exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights which vary from state to state. All claims must be mailed to our main office at 3025 West
7th Place., Eugene, OR 97402. For all appointments, please contact our Customer Service Department at 541-485-4050. Hours of operation are
Monday through Friday, 7:30am – 4:00pm PST.
3025 WEST 7TH PLACE | EUGENE, OREGON 97402
PH 541 4485 4050 | www.lanzcabinets.com