Rubber Vibration Absorber
M8, M10 & M12 threads
The asa vibration absorbers are rubber metal connected parts to absorb impact loads on components to protect them and to extent the life time of
the system. The patented solution is especially designed for highest shear loads. An assembly system can be checked by arrows on the metal parts
to help to optimize and raise the load capability of the vibration absorber.
*Smax…maximum working distance
Dimensions
order number
description
MDGQ403008IIK
MDGQ504510IIK
MDGQ755512IIK
MDGQ1007516IIK
40x40x30
50x50x45
75x75x55
100x100x75
A
[in]
1.57
1.97
2.95
3.93
B
[in]
1.18
1.77
2.17
2.95
C
[in]
0.79
0.98
1.48
1.97
M
metric thread x length[in]
M8 x 0.39
M10 x 0.47
M12 x 0.59
M16 x 0.65
Smax
[in]
± 0.12
± 0.24
± 0.31
± 0.35
weight
[lbs]
0.28
0.62
1.45
4.23
Load capacities, maximum static loads
order number
description
MDGQ403008IIK
MDGQ504510IIK
MDGQ755512IIK
MDGQ1007516IIK
40x40x30
50x50x45
75x75x55
100x100x75
compression FD
[lbf]
180
550
960
2630
tension FZ
[lbf]
60
330
510
1978
compression/shear FDS
[lbf]
160
350
580
1551
compression CD
[lbf/in]
60
75
119
292
tension CZ
[lbf/in]
19
54
63
221
compression/shear CDS
[lbf/in]
52
58
73
173
tension/shear FZS
[lbf]
80
340
490
1428
compression/shear diagonal FDSD
[lbf]
210
510
870
1877
tension/shear
CfZS
[lb
/in]
26
56
62
159
compression/shear diagonal CDSD
[lbf/in]
71
84
108
210
Spring rates
order number
description
MDGQ403008IIK
MDGQ504510IIK
MDGQ755512IIK
MDGQ1007516IIK
K
40x40x30
50x50x45
75x75x55
100x100x75
Assembly Instructions
Material
Assembly of 4 vibration absorbers:
best mounting position:
metal
metal part to
be loaded
all 4 arrows have to point
towards the middle
elastomer
zinc coated
steel
natural rubber
working temperature range
-22°F to 176°F
fixed metal part
arrow points into
direction of load
This data sheet shows a technical overview of our products. Please contact us if more exact information is needed. As we are constantly improving our products, their characteristics, dimensions and weights may also change, although we
do our best to incorporate these changes continually. The information in this data sheet is intended to be used as a first general guideline only. asa assumes no liability for any information therein, any errors, omissions, misprints, nor any
direct or indirect damages, losses or costs resulting therefrom. The cooling performance and the general technical values indicated in this catalogue are measured at a test bench according to asa testing procedures Because there is no
standardized testing procedure, tests used by other manufacturers could have different results. Due to different conditions in testing and application environments the cooling performance may also vary by +/- 15%. Therefore we
recommend all coolers to be checked under the system operating conditions. This is also true of vibrations and mechanical stress as well as for pressure peaks and thermal stress and any other relevant factors.
© asa hydraulik, June 2013