Force and Torque Measurement solutions
Single column testing machine
STENTOR II
ANDILOG Technologies • [email protected] • Phone. : +33 (0) 820 888 202 • Fax : +33 (0) 820 888 902
STENTOR II material tester
Design and innovations that simplify your tests
The test stand Stentor II is a complete force measurement system, ready to be used.
Designed with the latest technologies of our force gauge Centor Touch, it can perform force
measurement in tension and compression up to 5000N.
The Stentor II is designed to perform tests on various types of materials and a wide range of
applications; it is suited to production, quality control and laboratories environments. It
meets all the requirement of force measurement when the speed of the test is specified or
when the speed changes the results on the force measurement.
Presentation
Thanks to its large color touch screen, the Stentor II displays the curve of force vs. deflection.
Its friendly-user graphics interface makes the tests easy to setup and the fast results to analyze
and use.
All-in-one system, it is possible to use it as a stand alone tester without any software or computer. Nevertheless, it keeps all the features of a computerized stand: statistics, calculations,
curve, memory for 1000 results,... With its outputs, you can connect the Stentor II to a computer or a logic controller through its USB, RS232 or TTL outputs.
The control command is used to configure the up and down features. A single button is used
to start test and tare the force. A part of its standard features are: cycles, limits stop, automatic return, automatic identification of additional load cell, and more.
Mechanical stops
Separated control command
to setup deflection, speed and
tester actions.
Large threaded working table to fix
a wide range of grips and fixtures.
Displays the curve of force vs
deflection or force vs time, on
a color touch screen.
2
One button to simply
start/stop the test.
Pre-loaded ball screws and crosshead guidance
system ensure high displacement precision
ANDILOG Technologies • [email protected] • Phone. : +33 (0) 820 888 202 • Fax : +33 (0) 820 888 902
Customize to your measurements
Fixtures and accessories
Dedicated solutions
Our product line of material testing equipment STENTOR II can perform several different types of tests and on different types of
sample; we know at Andilog that each measurement is unique. Our wide range of standard grips, fixtures, jig, probe, friction table
and platen matched your specific need.
Transmit
RSIC LAB
DATASTICK
TTL I/O
Transfer measurement data
to a standard Excel spreadsheet or text format.
Memories data, results, statistical or curve can be easily transferred.
With the Datastick option,
you can save directly your
results, curves and measurement on a USB stick. No
need any more to be
connected to a computer to
collect your measurements.
The Stentor II has 6 TTL
outputs and 2 TTL inputs,
which can be configured
with a logic controller, by
example, to transmit measurements data, tare the
values or start the tester.
3
ANDILOG Technologies • [email protected] • Phone. : +33 (0) 820 888 202 • Fax : +33 (0) 820 888 902
Characteristic application
Integrated calculations
The material tester Stentor II has pre-defined automatic calculations. You can configure up to two calculations simultaneously during the test.
First pic
Force at time
Application
Break force
Spring Stiffness
ITime of the peak force
Average force on windows
time or during the whole test
Deflection at break
Test types
4
Crimping/wires test
Peeling test
Spring tests
Crushing test
on bottle
Texture
Compression testing
on foam
ANDILOG Technologies • [email protected] • Phone. : +33 (0) 820 888 202 • Fax : +33 (0) 820 888 902
MECHANICAL
STENTOR II 1KN
STENTOR II 2KN
STENTOR II 5KN
Capacity
1 kN
200 lbf
200 mm
7.9 in
350 mm
13.8 in
105 mm
4.1 in
3 mm/min
0.1 in/min
350 mm/min
13.7 in/min
350 mm/min
13.7 in/min
345x 500x851mm
13.58x19.68x33.5 in
35 kg
66 lb
220V
110 V
2 kN
500 lbf
300 mm
11.8 in
450 mm
17.7 in
105 mm
4.1 in
3 mm/min
0.1 in/min
350 mm/min
13.7 in/min
350 mm/min
13.7 in/min
345x500x951mm
13.58x19.68x37.44 in
50 kg
88 lb
220V
110V
5kN
1,000 lbf
300 mm
11.8 in
450 mm
17.7 in
105 mm
4.1 in
3 mm/min
0.1 in/min
300 mm/min
11.8 in/min
300 mm/min
11.8 in/min
345x500x951mm
13.58x19.68x37.44 in
55 kg
100 lb
220V
110V
Travel
Vertical space
Width between columns
/Depth
Minimum speed
Maximum speed
Return speed
Dimensions
LxDxH
Weight
Supply voltage
MEASURE
GAMME STENTOR II
Load cell capacity
Load cell accuracy
Load cell resolution
Force Units
Overload protection
Deflection accuracy
Deflection resolution
Deflection units
Data sampling rate
9 load cell from 10N to 5000N / 2 lbf to 1,000 lbf
0.1% full scale
1 / 10 000
N, lb, Kg, g, Oz, daN
Up to 200% of full scale
0.5% of reading value
0.02 mm / 0.001 in
mm, in
1 000 Hz
FEATURES
GAMME STENTOR II
Memory
Statistical
Display
Limits
Pre-defined calculations
SPIP technologies
RS232 outputs
USB Outputs
Analog outputs
TTL I/O
Bluetooth
Datastick
Safety guard
1 000 results, 1 curve
Automatic calculation of the mean and standard deviation of 2 results (max, min ...)
2 lines / 3 lines / 2 lines and curves
Stopping or reversal of movement sets on up and down limits
Break, average, sleeping mean, maximum, contact, first peak
Automatic recognition of additional sensors
Continuously (100Hz) or on demand through a computer
Continuously (1000Hz) or on demand through a logic controller
On Force only
6 outputs and 2 inputs
Optional: continuously (100Hz) or on demand through a computer
Optional: save data on USB stick: curves, results and statistical
Optional: with security door to stop engine when opening
Technical specification
Technical specification of the Stentor II
General working conditions :
- Working Temperature: 10°C to +35°C (50°F to 95°F)
- Humidity: normal condition for laboratory or industrial
- The material testing equipment should be used on a flat, stable and not subject to vibration environment
ANDILOG Technologies • [email protected] • Phone. : +33 (0) 820 888 202 • Fax : +33 (0) 820 888 902
5
Our international distributors
Argentina
Austria
Australia
Brazil
China
Colombie
Czech Republic
Denmark
Egypt
Estonia
Finland
Germany
Greece
Hungary
Indonesia
Israel
India
Iran
Italy
Mexico
Netherlands
Norway
Peru
Portugal
Republic of Korea
Romania
Russia
Singapore
Spain
Sweden
Switzerland
Thailand
Turkey
United Kingdom
Venezuela
Tunisie
Headquarter and
production site in
France
Production site and
customer support in
America
Single column testing machine
STENTOR II
Certifié ISO 9001 : 2008
Headquarter
USA
ANDILOG Technologies
BP 62001
13845 Vitrolles Cedex 9
France
[email protected]
www.andilog.fr
Tél. : +33 (0) 820 888 202
Fax : +33 (0) 820 888 902
COM-TEN Industries
6405 49th Street North
Pinellas Park, FL, 33781
USA
[email protected]
www.com-ten.com
Tél. : +1 727 520 1200
Fax : +1 727 520 0299