P4 Direct Linear Pendant Specification Sheet

Project:
Comments:
P4 4" WIDE PENDANT
Prepared By:
High performance stand alone pendant fixture
Programmable digital dimming to 0.1%
Tunable spectrum single point source produces wide
range of white, pastels & saturated colors
Connects with Ketra’s N3 Satellite for power, wireless
control and connection to Ketra’s library of light content
Closed-loop color point maintenance to <1 MacAdam
ellipse over lifetime and temperature
Ketra’s technology ensures consistent appearance and
guaranteed compatibility over LED technology generations
HARDWARE ORDERING GUIDE
HOUSING
P4
Series
BT
Length
Lumens
Platform
& Control
Voltage
Code
Series
4" Wide Pendant
Housing
Color
Ceiling
Type
Voltage
4 feet (50")
120VAC 60Hz
BT
Code
36 inches
36
72 inches
72
Cabling
11
Input Only
1
Input & Output
2
6 feet (74")
06
220-277AC 60Hz
21
8 feet (98")
08
220-277AC 50Hz
22
Cable Color
Housing Color
Lumens
Cable
Color
Aircraft Cable Length
Wide Platform, Tunable
Length
04
Cabling
Code
Platform & Control
P4
Aircraft
Cable
Length
400 Lumens
04
Matte White
MW
White
W
600 Lumens
06
Matte Black
MB
Black
B
800 Lumens
08
1100 Lumens
11
Ceiling Type
Hard Ceiling
C1
T-Bar
C2
770-000026-01-r04
Specifications are subject to change without notice
Designed in Austin, TX
512-347-1100 | ketra.com
© 2017 Ketra, Inc. All rights reserved
P4 4" WIDE PENDANT
SPECIFICATIONS1
OPTICAL PERFORMANCE
ELECTRICAL
Lumen Output2
P4.04 408lm/ft
P4.06 608lm/ft
P4.08 817lm/ft
P4.11 1071lm/ft
Power consumption
P4.04 8 W/ft
P4.06 10.1 W/ft
P4.08 13 W/ft
P4.11 16.7 W/ft
CRI (Ra)3
>90
Power Factor
>0.9
Lumen Maintenance4
50K Hours to L70@25˚C Ambient
Current
0.140 A/ft Max
Color Spatial Uniformity 3
<2 MacAdam ellipses across field angle
Color Point Range5
<1 MacAdam ellipse over product lifetime
Efficacy
P4.04 51.6 lm/W
P4.06 60.2 lm/W
P4.08 62.9 lm/W
P4.11 64.1 lm/W
Beam Angles
80x95˚
Dimming Range5
0.1–100% lm output
KETR
Max. qty of fixture length per
40
N3 power feed
DRAWING IS VALID FOR:
Natural Light. Bett
Max total run length,
100ft
including cable,
per N3
810-000054-XX
- P4, 4FT
ENVIRONMENTAL
3815 S. CAPITAL OF T
SUITE 100
AUSTIN, TX 7
P: 512.872.43
Ambient Operating Temperature
-20 to 50˚C
Storage Temperature
-20 - 80˚C
Humidity
0 - 95%, Non-condensing
N3 Satellite 810-000056-XX - P4,
N3IND1RECBK
8FT
Certification
UL, cUL, RoHS
N3 Satellite Plenum Rated
Location
UL Damp Location, IP20
810-000055-XX - P4, 6FT
ACCESSORIES
N3IND1PLEBK
MECHANICAL
Weight
1.35 lbs, 600 g
Housing Material
Powder Coated Aluminum, Polymer
Lens Material
Non-yellowing heat/
UV stabilized PMMA
Additional Optic Lens Holder
2.5” Lens, 1/8” Thick
Additional Trim Lens Holder
2.75” Lens, 1/8” Thick
Housing Material
Powder Coated Steel, Polymer
Lens Material
Glass
2.5"
[63.3mm]
r-,
4.0"
[101.6mm]
FORM FACTOR
Dimensions
M
Length
Height
Width
5.25"
4"
I_
-
E
E
M
M
�
L...J
98"
72"
98.0"
[2489.2mm]
50"
r-,
":
(0
P4, 6FT
Ol
(0
�
P4, 8FT
74.0"
[1879.6mm]
E
E
�
L...J
-
C
All performance measurements taken with fixture stabilized at 25°C ambient, 100% power input, unless otherwise stated, within CCT range of 2700 - 5000K.
I
2
Lumen measurement complies with IES LM-79-08 testing procedures.
3
Lumen maintenance values calculated in accordance to TM-21 procedures based on LM-80 compliant measurement data.
1
770-000026-01-r04
Specifications are subject to change without notice
Designed in Austin, TX
512-347-1100 | ketra.com
FOR REFERENC
NOT FOR
CONSTRUCT
DRAWING TYPE: PDD
DRAWING#:
REVISION#: 00
© 2017 Ketra, Inc. All rights reserved
DATE: 04/05/2017
DRAWN BY: JR, CEH
50.0"
CHECKED BY: GEB
98.0"
P4 4" WIDE PENDANT
[2489.2mm]
P4, 8FT
DIMENSION DRAWINGS
-
74.0"
[1879.6mm]
FOR REFERENCE ONL
NOT FOR
CONSTRUCTION
P4, 6FT
DRAWING TYPE: PDD
DRAWING#:
REVISION#: 00
C
DATE: 04/05/2017
DRAWN BY: JR, CEH
50.0"
[1270.0mm]
CHECKED BY: GEB
DRAWING
SCALE: NTS
P4, 4FT
IS VAL
810-000054-XX SHEET NAME
P4
810-000055-XX
PRODUCT
DOCUMEN
DRAWING
810-000056-XX SHEET
r-,
":
(0
E
E
1
�
Ol
(0
�
OF
1
L...J
C
2.5"
[63.3mm]
I
98.0"
[2489.2mm]
P4, 8FT
4.0"
[101.6mm]
74.0"
[1879.6mm]
C
I
98.0"
[2489.2mm]
P4, 6FT
P4, 8FT
C
74.0"
[1879.6mm]
P4, 6FT
PROPRIETARY
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
KETRA. INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE
WRITTEN PERMISSION OF KETRA, INC.
IS PROHIBITED.
-
50.0"
[1270.0mm]
P4, 4FT
C
50.0"
[1270.0mm]
P4, 4FT
770-000026-01-r04
Specifications are subject to change without notice
Designed in Austin, TX
512-347-1100 | ketra.com
© 2017 Ketra, Inc. All rights reserved
I_
Wide Gamut:
Ketra’s tunable spectrum lamp can easily be configured via our
Design
Studio software tool. The product can reproduce any
P4intuitive
4" WIDE
PENDANT
color point within the triangle shaped gamut indicated in the chart
below. With Ketra’s innovative optical and thermal feedback system,
the 520
color
point is maintained to an accuracy of <1 MacAdam ellipse
WIDE
GAMUT
CIE 1931 Color Chart
over the lifetime of the product and across operating temperature range.
0.9
y
0.8
540
0.9
y
0.7
0.8
0.6
560
540
Green: 0.256, 0.600
0.7
Green
500
0.5
560
580
0.6
0.4
Green: 0.256, 0.600
Red: 0.681, 0.307
Green
500
0.5
ody
kB
ac
l
B
580
480
600
Red: 0.681, 0.307
ody
kB
ac
Bl
0.4
0.3
480
0.1
0.0
0.0
0.1
0.0
Blue: 0.170, 0.110
Blue
480
Blue: 0.170, 0.110
470
460 470
0.0
700
Blue
480
0.1
700
620
Red
0.2
620
Red600
0.3
0.2
Ketra’s P4 Linear Pendant can easily be configured via our intuitive
Design Studio software. The product can reproduce any color point
within the triangle shaped gamut indicated in this illustration. With
Ketra’s innovative optical and thermal feedback system, the color point
is maintained to an accuracy of <1 MacAdam ellipse over the lifetime of
the product and across operating temperature range.
CIE 1931 Color Chart
520
360
460
0.2
0.1
0.3
0.2
360
0.3
0.4
0.4
0.5
0.5
0.6
0.6
the product and across operating temperature
range
x
x
0.7
0.8
0.7
Calibrated Gamut: color point is maintained to an
accuracy of <1 MacAdam ellipse over the lifetime of
the product
and point
across
operating to
temperature
Calibrated
Gamut: color
is maintained
an
accuracy
of <1 MacAdam ellipse over the lifetime of
range
Expanded Gamut: Color calibration is
relaxed
suchColor
thatcalibration
each product
produces
Expanded
Gamut:
is
thesuch
most
saturated
color
it is capable of.
relaxed
that
each product
produces
the most saturated color it is capable of.
0.8
Custom Order Codes:
Custom Order Code
Notes
Code
Custom Field
I= Incandescent
H= Halogen
X= Xenon
L = Lee
A = illuminant A
R= Rosco
”XXXX”(Gel #)
Gel
Standard gel colors available
G
G = GAM
D = D65 Source
A = Apollo
GENERAL SPECIFICATIONS
CCT Value
Specifiable in 1° Kelvin increments 1,400 K - 10,000 K
K
XXXXX
LEDCIE
Luminaire
employ closed
loop x=.340,
optical and
thermal
feedback
LED Luminaire shall
and IP 20
1931 x, shall
y Coord.
Example:
y=.350
OC=A340350
A be sealed, meeting UL damp location
XXXXXX
capable of maintaining color point accuracy of <1 MacAdam ellipse.
requirements.
Pantone
Ketra can emulate standard Pantone colors
P
XXXXXX
Lamp
Ketra can emulate typical lamps and dim curves
LED Luminaire shall have color spatial uniformity of <2 MacAdam
ellipses over full field angle.
General Specifications:
L
LED Luminaire shall be dimmable to 0.1% of measured luminous flux
with digital dimming.
LED Luminaire shall be capable of a CRI >90 at any point along the
Black Body Curve from 2700 - 5000K.
LED Luminaire shall be UL listed and RoHS compliant.
LED lamp shall employ closed loop optical and thermal
LED lamp
shall
compatible
E26 or
base sockets.
LED Luminaire
shall
be be
capable
of in situwith
firmware
andGU24
software
feedback
capable
of
maintaining
color
point
accuracy
of
LED
lamp
shall
be
dimmable
to
0.1%
of
measured
LED Luminaire shall be a single source multi-die emitter.
upgrades.
<1 MacAdam ellipse.
luminous flux with digital dimming.
LED lamp shall have color spatial uniformity of <2 MacAdam ellipses
LED lamp shall be UL listed and RoHS compliant.
over full field angle.
LED lamp shall be capable of in situ firmware and
LED lamp shall have an integrated wireless control on-board.
software upgrades.
LED lamp shall be capable of a CRI >90 at any point along the
LED Lamps shall be warranted to be free from material defects in
LED Luminaire lamp shall be
Black Body Curve from 2700 - 5000K.
material and workmanship for five (5) years or 25,000 hours from date
LED lamp shall be a single source multi-die emitter consisting
of shipment, whichever is less.
of both monochromatic and phosphor converted blue LED die.
LED lamp shall be sealed, meeting UL damp location and
IP20 requirements.
LED A20 lamp shall be #
770-000017-14
770-000026-01-r04
Specifications
are subject to change without notice.
Specifications are subject to change without notice
Designed in Austin, Texas
Designed in Austin, TX
+1.512.347.1100 | www.ketra.com
512-347-1100 | ketra.com
© 2016 Ketra. Inc. All rights reserved
© 2017 Ketra, Inc. All rights reserved

Download Report