thirteen
JIC 8000
CERAMIC FIBER BLANKET
Ceramic fiber product are made from exceptionally pure
alumina, silica and refactory oxides. This assures that all
ceramics fiber have excellent temperature resistance,
outstanding thermal stability, and good resistance to
devitrification.
Technical Characteristic and Application :
 Excellent thermal stability
The high purity fibers have good resistance to devitrification and are suitable or use up to 12600 C
 Low thermal conductivity
Ceramic fiber is an excellent insulator, having lower thermal conductivity than normal refacton lining material
 Low heat storage
Heat up and cooldown times are reduced substantially, and the productivity of a furnace or kiln can be increased
in cyclical operations.
 Light Weight
Structural strength requirement are reduced with considerable saving as result.
 Resistant to thermal shock
A furnace or kiln can be rapidly heated and cooled.
 Chemically stable
Ceramic fiber product are essentially unaffected by all chemicals except hydrofluoric and phosphoric acid, and
strong alkalis. If wet by oil or water, their thermal and physical properties will be fully restored after drying.
 Resilient and resistant to physical abuse
 They provide acoustic insulation resulting in a quiter working environment
Properties
Melting Point
Density
Thermal Conductivity
(at 600 C)
Shot Content
(212m UP)
Linear Srinkage After Soaking
(2411 at 1100 C)
Tensile Strength
Chemical Composition
(Ai203 + SiO2)
(Ai202)
: 12600 C
: <17600 C
: 70 - 160 kg/m3
Thermal Conductivity
: 0.17 Kcl/m.h.C
: 10%
0,3
: 2%
: 0.5 kg/cm2
: 99.4
: 46.2
0,2
Standard size :
Thicknes
Width
Length
0,5" / 12.5 mm
610 mm
7200 mm
1" / 25 mm
610 mm
7200 mm
2" / 50 mm
610 mm
3600 mm
0,1
200
1
1
400
600
800 1000
Mean Temperature 0C
1200
JIC 2008
CERAMIC FIBER ROPE
Ceramic Fiber rope (with or without wire) :
1. Ceramic fiber round braided rope
2. Ceramic fiber twisted rope (yam)
3. Ceramic fiber square braided rope
4. Ceramic fiber twisted rope (wicker)
Technical Characteristics :
 Excellent high temperature stability
 Excellent tensile strength
 Excellent thermal electrical insulation
 Excellent chemical stability resistance
 Low thermal conductivity
Application :
 Insulation of-high-temperature tube, container, etc.
 The seal of the door of industrial furnace
 The protection of cable, fuel tube, etc.
 Fireproof twine, wrap, cover, etc.
 Compound material produce.
Properties :
 Temperature
 Density
 Organic content
: 6000 C
: 400-600 kg/m3
: <a 15%
JIC 1208 - JIC 1108
CERAMIC FIBER CLOTH - TAPE
Technical Characteristics :
 Excellent high temperature stability
 Excellent tensile strength
 Excellent thermal electrical insulation
 Excellent chemical stability resistance
 Low thermal conductivity
Properties :
 Temperature: 6000 C
 Density: 500 kg/m3
 Organic content: 15%
Cloth:
 Dimension
Tape:
 Dimension
Application :
 Insulation of high-temperature tube,
container, etc.
 The curtain of industrial furnace
 The rolled curtain to meet spark
 The seal of the door of industrial furnace
 The protection of cable, fuel tube, etc.
 Fireproof rolled curtain
 Compound material produce
 Fireproof twine, wrap, cover, etc.
: 30000 x 2200 x 2 mm
30000 x 2200 x 3 mm
: 30000 x50 x 2 mm
30000x50x3 mm
2
JIC 900
ROCKWOOL BLANKET
Rockwool product are made from silica oxida, aluminium oxide,
calsium monoxida and others. This assures that all rockwool have
good temperature resistance, outstanding thermal stability, and good
resistance to devitrification. These product is an ideal insulation
material and suitable for acoustic absorption effects.
Technical Characteristics :
1. Small thermal conductivity and good performance of insulation
The fiber of rockwool is fine and flexible. The fiber is well distributed,
thermal conductivity is between 0.039 and 0.043 W/m.k. Rock wool is
an ideal insulation material to reach excellent result of energy saving.
2. Fire resistance
This product is accredited as a non-combustable material by tested to ASME E-136. The Rockwool product are
based on stone wool, which cannot burn and which can stand temperatures up to 650
degrees C. Rockwool stone the best guarantee for an effective fire protection.
3. Sound Insulation
Rock wool products are usually used for sound absorption in wall of building.
4. Moisture absorption
These product are water-repellent, non-hygroscopic. Rockwool absorbs very little water from the air.
For example, at relative humidity of 90 per cent the hygroscopic water content in rockwool is only approx. 0.004 per
cent by volume, which is totally unimportant in practice.
5. Corrosion resistance
As rockwool is made from practically non-alkaline materials, it does not react chemically and therefore does not
support corrosion.
6. Chemical Properties / Biological properties
Mineral wool is neutral (PH 7) or slightly alkaline and meet the requirement of standard ASTM C 795 JIS A 9504. It
will not normally support the growth of molds, fungi and bacteria.
Product Description
These product are relatively flexible, lightweight mats.
Application
Normal type among blankets, which is suitable for big diameter pipelines, boilers, vessels, flat and irregular surface,
building walls with good thermal and accoustic absorption effects.
Density
Density rock wool blanket is 80 kg/m3, 100 kg/m3 and 130 kg/m3
Thermal conductivity
Thicknes
mm
Size
Size in mm
K-value
W/mK
80 kg/m3
100 kg/m3
130 kg/m3
50
0.038
0.037
0.036
75
0.044
0.043
0.042
100
0.053
0.051
0.050
3
Length
Width
Thickness
5000
600
50 -100
JIC 901
ROCKWOOL BOARD
Product Description
These product are high quality, resin-bonded boards with various
compression.
Application
Used in building wall/roots, elevator wells. Vessel, tanks, oven, ducts
and other industrial equipment insulation.
Density
Density rock wool, board is 80 kg/m3, 100 kg/m3, 120 kg/m3, 140
kg/m3, 150 kg/m3 and 200 kg/m3
Dimensi
Thickness 25 - 150 mm
Length
mm
910
1000
1200
1210
Width
mm
600
605
630
910
JIC 902
ROCKWOOL PIPE
Product Description
The pipe section is produced from non-combustible mineral fibers. It
performs strong and rigid. Each section is split at one side and hinged
at the other side for easy installation.
Application
The pipe sections are suitable for application on process and piping
works operating at maximum temperature 750°C, with outer diameter
of the Insulation up to 610mm. It can also be used in air-conditioning
systems, flange and central-heating, The high water-repellent effect
and external shock resistance make it Ideal for application In condition
where water can penetrate the Insulation system and great
compression resistance is required.
Tickness mm
22
27
34
43
48
60
76
89
108
114
133
140
159
165
219
273
325
351
406
456
508
558
610
Density : 130 kg/m3, 150 kg/m3
Length of all sizes 1000 mm
Other/special size, d ensity and thickness on request
4
JIC 8900
THERMO COVER
The conventional heat insulator has a drawback
that disassembly and remounting work had to
be done if overhaul and maintenance of the
insulated instrument reduce the irksome work
was far as possible, THERMO COVER, an
economical energy-saving and resources-saving
type heat insulator, was invented by integrating
the insulator and jacket to enable them to be
easily mounted, disassembled and remounted.
Characteristics :
(1) All-weather type :
Being different from the conventional heat insulator, made of
asbestos material, THERMO COVER has a substrate made of
silicone coated glasscloth, characterized by an all-weather type
insulator with water heat oil and chemical resistance.
(2) Freely mountable and dismountable :
Being fixed using snap hook, button and adhesive tape etc. with
specific devices according to the individual applications,
THERMO COVER can be mounted and dismounted easily by
everyone with no special skillfulness.
(3) Beatiful and economical
Appearance of THERMO COVER is colored with silicone of light
gray or silver, Since a dust-free atmosphere can be maintained
on the occasion of mounting and dismounting, THERMO
COVER is the most suitable insulator
for the precision
instrument plant, food plant and hospital where environmental
preservation should be strictly kept.
THERMO COVER is an economical insulator because it is
repeatedly usable having a low dissipation of energy.
(4) A custom made product is available
Products in compliance with all purposes, not only for the flange
and valve uses but also for the measuring instrument, flexible
pipe and pump device uses, are provided.
Specification :
Glasscloth substrate without treatment.. safety
working temperature 550 °C
Silica glasscloth......................safe working
temperature 800 °C
As filled material, glass wool for low tempera
ture use up to about 250 °C, rockwool, long
glass-yarn pincushion mat, and ceramic fiber for
high temperature use are applied. Fitting metal
made of brass (Cr-plating) and fitting string
made of glassfiber are used.
Requests for on-site measurement
Standard type products can be made for ball valve and flange.
THERMO COVER for other valves and equipment is
custommade. Dimensional drawings or on-site diagrams of pipe
slittings and wiring are always necessary, (Assignment of muffler
type or handle cap is recommended. On-site measurement will
be conducted by us.)
5
JIC 7000 CH, JIC 7000 / A
SILTEMP / SILICATEX
(With or without aluminized)
DESCRIPTION :
Cloth waven with glass yarn as a covering for heat insulation,
Heat retaining, protection from welding flame curtains and as
Thermal barrier.
Temperature :
JIC 7000 CH
JIC 7000
: 1000° C
: 650° C
STANDARD SIZE :
T
: 0,9 mm - 1,5 mm
W
: 1 yard.
L
: 55 yard
Available
: JIC 1007 Twisted Rope Size1/4" to 1"
JIC 2007 Round Braided Rope Size1/4''to 2"
JIC 2017 Square Braided Rope Size1/4''to 2"
JIC 7100 / A / T / TA
BULKY GLASS FIBER CLOTH / ALUMINIZED / TAPE / TAPE + AL
DESCRIPTION :
Cloth waven with Bulky Glass Yarn Heat insulation or curtain
as a substitute for Asbestos Cloth.
The most efficient for flexibility, resin impregnation heat
insulation.
SPECIFICATION :
Heat Resistant
Tensile strength
Standard Size :
T
: 1,5 mm
W
: 1 meter
L
: 30 meter
: 600° C
: Warp 203
Weft 125
Shirinkage in percentage :
800° C x 0,5 hr
: 5%
JIC 3220 - JIC3225 / G
(Glass Cloth Gasket / Glass Cloth + Wire + Graphite)
Characteristic
Glass cloth is coated with heat-resistant rubber compound and
fabricated into manhole type gasket, JIC-3225 is same type, but wire
reinforced. Graphite coated also available.
Max. Service Temperature
JIC 3220
: 3000 C
JIC 3225
: 5000 C
Application
Heat resistant and mechanic strength areas such as super:
heated steam,6 exhaust gas; etc.
6
JIC 1004
TWISTED ASBESTOS ROPE
DESCRIPTION :
Made by twisting numbers of Asbestos Yarn.
APPLICATION :
Packing for Heat-Resistance or Heat Keeping in Steamer, boiler, vehicles
and machineries and sealing for highly heated part,
TEMPERATURE :
400° C
STANDARD SIZE :
1/8" up
JIC 1204
THERMO CLOTH
JIC 1205
THERMO TAPE
DESCRIPTION :
Cloth coated with aluminium foil on
one side by a special method. The
use of this product perfectly keeps off
heat sparks, oil, water, etc
DESCRIPTION :
Made by cutting JIC-1204 into tapes
to prescribed dimensions.
APPLICATION :
Coating of air exhaust pipes, mufflers, etc. of combustion engines for ships as
well as thermal insulation of various kinds of high temperature pipe duct sand
all kinds of materials of aluminium made materials.
TEMPERATURE : 400° C
STANDARD SIZE : T : 1/16" & 1/8"
W : 1-1,1 mtr
L : 30 meter/ up
Refr. : KS L 5202
JIS R 3451
JIC 1600
RUBBERIZED ASBESTOS
CLOTH
JIC 1600 W
RUBBERIZED ASBESTOS
CLOTH WIRE INSERTED
DESCRIPTION :
Asbestos cloth or metallic asbestos
cloth coated with Heat-Resistant
rubber compound ( also called Tacky
Sheet).
DESCRIPTION :
Same as JIC-1600, but inserted by
wire.
APPLICATION :
Gasket of Manhole, Handhole, joint of flange for steam, hot water, gas.
TEMPERATURE : 400° C ,
TEMPERATURE : 500° C
STANDARD SIZE : T : 1/16" & 1/8"
W : 1 -1,1 meter
L : 30'meter/up
Refr. : KS L 5202
JIS R 3451
STANDARD SIZE : T : 1/16" & 1/8"
W : 1- 1,1 meter
L : 30 meter/ up
Refr : KS L 5202
JIS R 3451
7
JIC 1112
METALIC
ASBESTOS TAPE
JIC 1102
ASBESTOS TAPE
DESCRIPTION :
Asbestos Yarn is woven into tape
(ribbon) form.
DESCRIPTION :
Tape woven with metal wire inserted
yarn.
APPLICATION :
Heat
Insulation,
Heat-Resistant
Gasket, Material of Packings.
Application:
Same as JIC-1102 but more suitable
for brake lining, clutch facing and
gasket.
TEMPERATURE : 400° C
STANDARD SIZE : T : 1/16" & 1/8"
W : 1'up
L : 30 meter/Up
TEMPERATURE : 500° C
STANDARD SIZE : T : 1/16" & 1/8"
W : 1"up
L : 30 meter/up
Refr : KS L 5202
JIS R 3451
Refr. : KS L 5202
JIS R 3451
JIC 1202
ASBESTOS
CLOTH
JIC 1203
METALIC
ASBESTOS CLOTH
DESCRIPTION :
Cloth woven with asbestos yarn by
plain weave,
DESCRIPTION :
Cloth but woven with Metallic
Asbestos Yarn.
APPLICATION :
Packing for Hot-Resistance, Fire
Protection Clothes, Gloves Insulation
for boilers and varies uses.
APPLICATION ;
Same as JIC-1202 but JIC 1203 is
Used for Brake Lining, Fire-Protection
screen and Heat-Resistant Gasket
which require super-heat or strength
resistance.
TEMPERATURE : 400° C
STANDARD SIZE : T : 1/16" & 1/8"
W : 1-1.1 meter
L : 30 meter/ up
TEMPERATURE : 500° C
STANDARD SIZE : T : 1/16" & 1/8"
W : 1- 1.1 meter
L : 30 meter /up
Refr. : KS L 5202
JIS R 3451
Refr : KS L 5202
JIS R 34511
JIC 1000
CALSIUM SILICATE
Description
Hard and new thermal insulation material featured with light weight, high
intesity, small thermal conductivity, high temperature-resistanace, high
erosian-resistance and cutting and sawing functions. The product is widely
applied to the insulation of heat, fire and sound of equipment, pipes, walls
and roof in the industries of power, metallurgy, refinery, petrochemical,
construction and shipping.
Techinal Properties
BULK DENSITY (KG/M3)
THERMAL CONDUCTIVITY (W/m.k)
COMPRESSIVE STRENGTH (MPa)
FLEXTURAL STRENGTH (MPa)
< 220
< 0.06
> 0.6
> 0.35
8
LINEAR SHRINKAGE (%)
MASS MOISTURE CONLENT (%)
SERVICE TEMPERATURE (0C)
< 2.0
< 7.5
650
Jl. Mayor Oking Jayaatmaja No. 88 Cibinong 16911, Jawa Barat
Telp.(021) 87918838 (Hunting), Facs.(021) 879188-41/-42/-43
Telp. (021) 6511234 (Hunting), Facs.(021) 6507546
i n d o p a c k Website: www.fajarbenua.co.id, E-mail: [email protected]
BRANCHES:
BALIKPAPAN
: Jl. Tulip Barat Blok E4/18, Komp. Balikpapan Baru, Balikpapan 76114 Telp. (0542) 87207374, Facs. (0542)872075
BALONGAN
: Jl. Taman Sindang Blok G No. 4, Indramayu 452111, Telp./Facs. (0234)273470
BATAM
: Perum. Anggrek Sari Emerald Blok E 2 No.100 Batam Center, Batam 29463, Telp. (0778)7548548
CILEGON
: Jl. Anyar Merak Ruko Bonakarta Blok A No. 26, Cilegon 42414 , Telp. (0254)387315-16, Facs. (0254)387314
CILACAP
: Jl. Gatot Subroto No. 75, Cilacap 53223, Telp./Facs. (0282) 534367
PALEMBANG
: Jl. Residen A. Rozak Komp. PHDM VIII No. 9, Kalidoni Palembang, Telp. (0711)714684, Facs. (0711)718237
PEKANBARU
: Jl. Tuanku Tambusai, Komp. MELLA Blok D-3, Pekanbaru, Riau 28282, Telp./Facs. (0761)571766/34475
SEMARANG
: Jl. Permata Hijau BB / 30 Pondok Hasanudin, Semarang 50142,Telp. (024)3510619 Facs. (024)3514473
SURABAYA
: Jl. Darmo Permai Timur 19F, Surabaya 60189, Telp. (031)7327000 (Hunting), Facs. (031)7327301
MAKASSAR
: Jl. Mawar, Komplek Nusa Tamalanrea Indah Blok ED 2, Makassar 90245, Telp./Facs (0411)4771974
MEDAN
: Komp. Tasbi II Blok V No. 16 Medan, Sumatera Utara 20133, Telp. (061)8217058, Facs. (061)8217058
MANUFACTURERS :
PT. TRI GRAHA SEALISINDO
TRI-GRAHA
PACKING & GASKET
Cloth & Tape
Gland Packing
Mechanical Seal
Mec
Fabric Expansion Joint
Flexible
e
Hose
PT. HIDROFLEX INDONESIA
EXPANSION JOINT
Metallic Expansion Joints
Rubber & Fabric Expansion Joints
Corrugated, Stainless Steel & Teflon/PTFE Hoses
Teflon Expansion Joints
Teflon Lined Stainless Steel Expansion Joints
Strainers
9
EC CE
RT I F ICAT E
PT. JEIL FAJAR
J
INDONESIA
Glass Fiber Cloth & Tape
Spiral Wound Gasket
Double Jacketed Gasket
Teflon/PTFE Lining / Ceramic Coating
ZIBO JEIL FAJAR GLASS FIBER
Glass Fiber Cloth, Tape & Yarn
East Taixue Road, Yiyuan County,, Zibo, Shandong, China
Working Together with :
JEIL E&S CO., LTD.
39-5,, Yusan
Yus dong, Yangsan-City, Kyungnam, Korea
US HOSE
CO., LTD
WiN FLEX
1529-12 Songjeong-dong, Ganseo-gu, Busan 618-817, Korea