F 2 S B s e r i e s L E D A re a L i g h t s
PROJECT:
TYPE:
PREPARED BY:
DATE:
F2SB048
F2SB080
F2SB100
F2SB150
F2SB200
F2SB300
Multiple Mounting Options
Heavy Duty Slim Design
High Performance LEDs
Reliable Driver with Long Life Span 2
Effective Thermal Management
Dark Bronze or White Finish
White Finish
available on all models
F2SB
1
Series
LED Area Lights
Construction
IES Classification:
The Type III (pre-installed) is ideal for roadway, general parking and other area
lighting applications where a larger pool of lighting is required. It is intended
to be located near the side of the area, allowing the light to project outward
and fill the area. Optional Lens for Type II, Type IV and Type V distribution.
IP Rating:
Ingress Protection rating of IP65 for dust and water.
Ambient Temperature:
Suitable for use in 45°C (113°F) ambient temperatures.
Cold Weather Starting:
The minimum starting temperature is -40°F/-40°C.
Thermal Management:
Superior thermal management with external Air-Flow fins.
Housing:
Die-cast aluminum housing.
Mounting:
Heavy-duty mounting options, angle adjustable, with seal & stainless steel screws
Lens:
Polycarbonate.
Gaskets:
High-temperature silicone gaskets
Finish:
Our environmentally friendly polyester powder coatings are formulated for
high-durability and long-lasting color, and contains no VOC or toxic heavy metals.
Green Technology:
Mercury and UV free, and RoHS compliant. Polyester powder coat finish
formulated without the use of VOC or toxic heavy metals.
Technical Specifications
Warranty:
PacLights warrants these LED products will be free from defects in materials and
workmanship for a period of five (5) years from the date of delivery to the end user,
including coverage of light output, color stability, driver performance and fixture
finish. Please refer to our full warranty.
Qualifications
ETL Listing:
ETL LISTED, CONFORMS TO UL STD 1598; CERTIFIED TO CSA STD C22.2 No.250.0
Suitable for wet locations.
IESNA LM-79 & LM-80 Testing:
PacLights LED luminaries have been tested by an independent laboratory in
accordance with IESNA LM-79 and LM-80.
Full Cutoff:
This product is a full cutoff, fully shielded luminaire.
*1
DLC Qualification:
Selected models of this product are on the Design Lights Consortium (DLC) Qualified
Products List and are eligible for rebates from DLC Member Utilities. To view our DLC
qualified products, please consult the DLC Qualified Products List
at www.designlights.org/qpl.
LED Characteristics
Lifespan:
100,000-hour LED lifespan based on IES LM-80 results and TM-21 calculations.
LEDs:
Multi-chip, high-output, long-life LEDs
Color Stability:
LED color temperature is warrantied to shift no more than 200K in CCT over a
5 year period.
Color Temp:
3000k(Warm white), 3500k, 4000k(Natural white), 4500k, 5000k (Daylight)
Color Uniformity:
PacLights' range of CCT (Correlated Color Temperature) follows the guidelines of
the American National Standard for Specifications for the Chromaticity of Solid State
Lighting (SSL) Products, ANSI C78.377-2011.
Color Rendering Index:
>70
Electrical
Drivers:
100-277V or 300-480v, 50-60Hz, Power Factor >95%，1-10v Dimmable
THD:
<15%
Optional Add-ons - field installed
Models
Model
Voltage(v)
Watts(W)
Lumens(LM) at 5000k
48
5,006
F2SB080
80
8,040
F2SB100
100
10,482
150
15,474
200
21,850
300
30,520
F2SB048
100-277
F2SB150
F2SB200
100-277
or
300-480
F2SB300
Options SKU
Description
AC2SBPS
Photocell, Twist Lock. 1.5 Fc, 120-277vAC, Instant On, 2-5sec OFF Delay
AC2SBPS480
Photocell, Twist Lock. 1.5 Fc, 480vAC, Instant On, 2-5sec OFF Delay
AC2SBSU
Surge Protector. VMAX AC: 277v, maximum Lightning Surge Current: 20,000A
AC2SBSU480
Surge Protector. VMAX AC: 480v, Maximum Lightning Surge Current: 20,000A
Ordering Information
F2SB150
LV
Model
Voltage
LV = 100-277v
(48/80/100/150/200/ 300w)
HV = 300-480v
(100/ 150/200/300w)
Mounting Options (field installed, angle adjustable)
Color Temperature
30 = 3000k (warm white)
35 = 3500k
40 = 4000k (natural white)
45 = 4500k
50 = 5000k (daylight)
AC2SBSF
Slipfitter Mount
AC2SBTM
Trunnion Mount
AC2SBAM1
Arm Mount for Square Pole
AC2SBAM2
Arm Mount for Round Pole
PacLights, LLC | PO BOX 928, Chino Hills, California 91709 USA Tel 800 988 6386 | Fax 800 685 5689
50
3M
B
SF
PS+SU
Mount
SF = Slipfitter
AM1= Arm (Square Pole)
AM2= Arm (Round Pole)
TM = Trunnion
Housing Finish Color
W = White
B = Dark Bronze
Light Distribution
2 = Type II (85° x 135°)
3S = Type III Short (90° x 120°)
3M = Type III Medium (90° x 140°) - included
4 = Type IV (140° x 100°)
5A = Type V (90°)
5B = Type V (120°)
www.PacLights.com | [email protected]
Optional Add-ons
if 2 or more are chosen,
add “+” in between.
PS = AC2SBPS or AC2SBPS480
SU = AC2SBSU or AC2SBSU480
see Optional Add-ons table for detail
www.paclights.com/product-tag/F2SB
AC2LEN
Lens
R
F 2 S B s e r i e s L E D A re a L i g h t s
visit our website for more information
Lens Options SKU for Light Distribution
2
Size
X = for F2SB048
(requires 1 pcs per fixture)
R = for F2SB080/100/150
(requires 1 pcs per fixture )
for F2SB200/300
(requires 2 pcs per fixture )
Light Distribution
2 = Type II (85° x 135°)
3S = Type III Short (90° x 120°)
3M = Type III Medium (90° x 140°) - included
4 = Type IV (140° x 100°)
5A = Type V (90°)
5B = Type V (120°)
Dimensions
F2SB048 installed with
Arm Mount (for Square Pole)
F2SB080/100/150 installed with
Arm Mount (for Square Pole)
F2SB200/300 installed with
Arm Mount (for Square Pole)
Mount Dimensions
AC2SBSF - Slipfitter (2.375” O.D)
AC2SBAM1 - Arm Mount (Square Pole)
AC2SBTM - Trunnion Mount
AC2SBAM2 - Arm Mount (Round Pole)
Pole Installation Suggestions
PacLights, LLC | PO BOX 928, Chino Hills, California 91709 USA Tel 800 988 6386 | Fax 800 685 5689
www.PacLights.com | [email protected]