SECTION H - SPECIALTY BALL VALVES
TABLE OF CONTENTS
SERIES
DESCRIPTION
PAGE
BRONZE
7K-100 Series
71-500 Series
75-100 Series
7K-100-SV Series
77-100-SV Series
78-124 & 78-125
78-248, 250, 256, 438
78-257 Thru 78-267
78-621 Thru 78-625
Threaded Full Port Bronze with Drain
Threaded Bronze Spring Return Handle
Threaded Bronze Pad Locking Valve
Threaded Full Port Bronze with Safety Vent (W/Threaded Port)
Threaded Bronze Full Port with Safety Vent
Threaded Bronze 5-Port Fuel Selector
Threaded Bronze Surface Mount
M x F Threaded Brass and Bronze Instrumentation
Threaded Bronze Irrigation
H-5
H-6
H-8
H-10
H-11
H-12
H-13
H-14
H-15
CARBON STEEL
7A-130-26 Series
89-500 Series
Threaded Dry Chlorine Carbon Steel with Ni-Cu Ball & Stem
Threaded Carbon Steel Spring Return Handle
H-3
H-16
STAINLESS STEEL
7H-800 Series
76-500 Series
M x F Threaded Full Port Stainless Steel
Threaded Stainless Steel Spring Return Handle
H-4
H-9
NICKEL
74-100 Series
Threaded Chemical Resistant Nickel
H-7
Carbon Steel Double Union End Ball Valve
Socket Weld Carbon Steel, Double Union End
Threaded Cast Carbon Steel
ASME 150 & 300 Flanged
H-17
H-18
H-19
D-4
UL LISTED CARBON STEEL
73-300 Series
73-400 Series
489-100 Series
87A/88A Series
“Apollo” Flow Controls
industrial.apollovalves.com
Customer Service (704) 841-6000
H-1
SECTION H SPECIALTY BALL VALVES
H-2
Customer Service (704) 841-6000
www.apolloflowcontrols.com
“Apollo” Flow Controls
7A-130-26 SERIES
CARBON STEEL DRY CHLORINE BALL VALVE W/ Ni-CU BALL & STEM
Female NPT Thread. 400 CWP (psig), Cold Non-Shock.
For Use With Dry Chlorine Gas and Dry Liquid.
Complies With Recommendations of Chlorine Institute Pamphlet No. 6.
MSS SP-110 compliant.
FEATURES
• Chevron style stem packing
• Ni-Cu ball and stem
• Investment Cast Parts
•
•
•
•
Zinc phosphate corrosion protection
Blowout-proof stem design
Bolted, adjustable packing gland
Vented ball
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
12
13
PART
Lever and grip
Bolt (2)
Gland plate
Packing set
Body
Seats (2)
Ball
Retainer
Body seal
Stem bearing
Stem
Packing gland
Lever nut
MATERIAL
304 SS w/vinyl
Zinc Plated Steel
304 SS
PTFE, Chevron style
A216-WCB
RPTFE
B164
A216-WCB
RPTFE
RPTFE
B164
A276-316
18-8 SS
Pressure/Temperature Ratings - Page M-16, Graph No. 17
DIMENSIONS
PRODUCT
NUMBER
7A-131-26
7A-132-26
7A-133-26
7A-134-26
7A-135-26
7A-136-26
7A-137-26
7A-138-26
“Apollo” Flow Controls
industrial.apollovalves.com
SIZE
A
B
C
D
E
WT.
1/4”
3/8”
1/2”
3/4”
1”
1.25”
1.5”
2”
0.43
0.50
0.50
0.68
0.87
1.00
1.25
1.50
1.56
1.56
1.56
2.00
2.37
2.24
2.65
3.25
2.75
2.75
2.75
3.50
4.12
4.24
5.13
6.00
1.93
1.93
1.93
2.31
2.43
3.00
3.38
3.67
3.87
3.87
3.87
4.87
4.87
5.50
8.00
8.00
1.25
1.21
1.14
2.11
2.94
4.40
7.04
10.86
Customer Service (704) 841-6000
H-3
7H-800 SERIES
M x F STAINLESS STEEL FULL PORT HYDRO BALL VALVE
Male x Female NPT Thread, 800 CWP (psig), Cold Non-Shock.
125 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
MSS SP-110 compliant.
FEATURES
• Blowout-proof stem design
• Adjustable packing gland
• Threaded drain port
• 316 SS ball & stem
• MPTFE packing
• PTFE seats
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
-01
-31-
OPTION
Standard Configuration
7H Series w/Boss NOT Drilled & Tapped
SIZES
All
1/4” to 1”
Pressure/Temperature Ratings - Page M-18, Graph No. 21
STANDARD MATERIAL LIST
PART
T-handle & grip
Stem packing
Stem bearing
Ball
Seat (2)
Stem
Gland screw
Lever nut
Retainer
Body
1
2
3
4
5
6
7
8
9
10
MATERIAL
SS
MPTFE
RPTFE
A276-316
PTFE
A276-316
A276-316
304 SS
A276-316
A351-CF8M
DIMENSIONS
PRODUCT
NUMBER
7H-801-01
7H-802-01
7H-803-01
7H-804-01
7H-805-01
H-4
SIZE
A
B
C
D
E
F
G
H
WT.
1/4”
3/8”
1/2”
3/4”
1”
0.37
0.37
0.50
0.75
1.00
1.47
1.55
1.79
2.01
2.39
2.46
2.54
2.83
3.42
4.17
1.39
1.39
1.45
2.08
2.38
2.56
2.56
2.56
3.25
3.93
0.93
0.93
1.00
1.01
1.12
0.53
0.53
0.53
0.75
0.94
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
1/8 NPT
0.65
0.62
0.73
0.86
1.65
Customer Service (704) 841-6000
www.apolloflowcontrols.com
“Apollo” Flow Controls
7K-100 SERIES
BRONZE FULL PORT BALL VALVE W/ SAFETY VENT
Female NPT Thread with Female NPT threaded drain port.
Recommended for water or air services.
Rated +50°F to 200°F, 0-125 psig.
FEATURES
• Chromium plated ball
• Mounting pad for easy actuator mounting
• Adjustable packing
• Blowout-proof stem design
• RPTFE seats and stuffing box ring
OPTIONS AVAILABLE: (More information in Section J)
E
TAPPING:
3/4" (10-24 NC)
1" - 1.25" (1/4-20 NC)
3/4" - 1.25" SIZE
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
K
D
G
(SUFFIX)
-01
-02-04-07-08-10-15-16-17-18-24-27-30-32-35-40-45-46-47-48-49-50-56-57-58-60-63-92-94-
ØA
J
F
B
H
TAPPING:
1.50" - 2" (5/16" - 24 UNF)
2.50" (1/4" - 20 NC)
C
1.5" - 2.5" SIZE
K
G
STANDARD MATERIAL LIST
PART
Lever and grip
Stem packing
Stem bearing
Ball
Seat (2)
Retainer
Gland nut
Stem
Lever nut
Body
MATERIAL
Steel, zinc plated w/vinyl
RPTFE
RPTFE
B16 Brass, chrome plated
RPTFE
B16 Brass (1/4” to 1”)
B584-C84400 (1.25” to 2.5”)
B16 Brass
B16 Brass
Steel, zinc plated
B584-C84400
SIZES
All
1/4” to 2.5”
1/4” to 2.5”
1/4” to 1.25”
1/4” to 2.5”
1/4” to 2.5”
1/4” to 1.25”
3/4” to 2.5”
1/4” to 2.5”
1/4” to 2.5”
1/4” to 2.5”
1/4” to 2.5”
1/4” to 1.25”
1/4” to 1.25”
3/4” to 2”
1/4” to 1.25”
1/4” to 2.5”
1/4” to 2.5”
1/4” to 3/4”
1/4” to 2”
1/4” to 2.5”
1/4” to 2.5”
1/4” to 2.5”
1/4” to 2.5”
3/4” to 2.5”
1/4” to 2.5”
1/4” to 2.5”
1/4” to 2.5”
1/4” to 2.5”
NOTE:
Also consider the 7K with “SV” suffix. The 7K with “SV” suffix has spring
washers that keep the upstream seat in contact with the ball.
DIMENSIONS
PRODUCT
NUMBER
7K-101-01
7K-102-01
7K-103-01
7K-104-01
7K-105-01
7K-106-01
7K-107-01
7K-108-01
7K-109-01
OPTION
Standard Configuration
Stem Grounded
2.25” Stem Extension (Carbon Steel, Zinc Plated)
Steel Tee Handle
90º Reversed Stem
SS Lever & Nut
Wheel Handle, Steel
Chain Lever, Vertical
Rough Chrome Plated
Plain Yellow Grip
Graphite Packing
SS Latch-Lock Lever & Nut
Cam-Lock & Grounded
SS Tee Handle & Nut
PTFE Trim
Cyl-Loc & Grounded
Less Lever and Nut
Latch Lock Lever -Closed Position
SS Oval latch-Lock Handle & Nut
SS Oval Handle (No Latch) & Nut
No Lubrication. Assembled Dry.
2.25” CS Locking Stem Extension
MPTFE Seats and Packing
Oxygen Cleaned
Chain Lever - Horizontal
Grounded Ball & Stem
NPT x Solder/Socketweld
Balancing Stop
2.25” CS Stem Extension & Balancing Stop
SIZE
A
B
C
D
E
F
G
H
J
K
WT.
1/4”
3/8”
1/2”
3/4”
1”
1.25”
1.5”
2”
2.5”
0.43
0.50
0.50
0.81
1.00
1.25
1.50
2.00
2.50
1.12
1.12
1.12
1.56
1.81
2.12
2.37
2.65
3.25
2.25
2.25
2.25
3.12
3.62
4.25
4.75
5.37
6.50
1.81
1.81
1.81
2.12
2.62
2.87
3.34
3.71
4.12
3.87
3.87
3.87
4.87
5.50
5.50
8.00
8.00
8.00
0.87
0.93
0.93
-
1.37
1.50
1.50
2.08
2.41
2.75
0.093
0.093
0.125
0.296
0.310
0.370
0.500
0.625
1.090
1.18
1.18
1.25
1.56
1.78
2.03
2.21
2.68
3.00
0.901
1.121
1.371
1.282
1.562
2.002
0.70
0.66
0.73
1.93
3.42
5.15
6.81
11.85
17.35
1 To Top of Mounting Pad
2 To Centerline of Mounting Pad
“Apollo” Flow Controls
REV. 04APR16
industrial.apollovalves.com
Customer Service (704) 841-6000
H-5
71-500 SERIES
BRONZE BALL VALVE W/ SPRING RETURN HANDLE
Female NPT Thread, 600 CWP (psig), Cold Non-Shock.
150 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
MSS SP-110 compliant.
FEATURES
•
•
•
•
•
•
•
•
Spring return to close (-01)
Spring return to open (-08)
All components of lever are SS
Operating torque is approximately three times standard valve torque
Reinforced seats
Blowout-proof stem design
Adjustable packing gland
Chromium plated ball
VARIATIONS AVAILABLE
• 71-540 Series
• 71-590 Series
(316 SS Ball & Stem)
(Pinned Retainer)
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
-01
-P -01-T -01-08-14-20-21-24-35-49-57-
OPTION
Standard Configuration
BSPP (Parallel) Thread Connection
BSPT (Tapered) Thread Connection
90º Reversed Stem
Side Vented Ball (Uni-Directional)
Slot Vented Ball
UHMWPE Seats (Non-PTFE)
Graphite Packing
PTFE Trim
No Lubrication. Assembled Dry.
Oxygen Cleaned
SIZES
All
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
Pressure/Temperature Ratings - Page M-10, Graph No. 4
STANDARD MATERIAL LIST
DIMENSIONS
PRODUCT
NUMBER
71-501-01
71-502-01
71-503-01
71-504-01
71-505-01
71-506-01
71-507-01
71-508-01
H-6
SIZE
A
B
C
D
WT.
1/4”
3/8”
1/2”
3/4”
1”
1.25”
1.5”
2”
0.43
0.50
0.50
0.68
0.87
1.00
1.25
1.50
1.12
1.12
1.12
1.50
1.68
2.00
2.18
2.34
2.25
2.25
2.25
3.00
3.37
4.00
4.37
4.68
7.00
7.00
7.00
7.00
7.00
9.00
9.00
9.00
1.47
1.45
1.35
2.33
2.59
4.18
5.31
6.41
Customer Service (704) 841-6000
1
2
3
4
5
PART
Handle
Stem packing
Stem bearing
Ball
Seat (2)
6
Retainer
7
8
9
10
11
Gland nut
Stem
Lever nut
Body seal
Body
www.apolloflowcontrols.com
MATERIAL
SS w/vinyl
Multifill PTFE
RPTFE
B16 Brass, chrome plated
Multifill PTFE
B16 Brass (1/4” to 1”)
B584-C84400 (1.25” to 2”)
B16 Brass
A276-316
Steel, zinc plated
PTFE (1.25” to 2”)
B584-C84400
“Apollo” Flow Controls
74-100 SERIES
CHEMICAL RESISTANT NICKEL BALL VALVE
Female NPT Thread, 800 CWP (psig), Cold Non-Shock.
150 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
FEATURES
•
•
•
•
•
•
Investment cast components
Reinforced SS lever and nut
Blowout-proof stem design
Adjustable packing gland
Fire safe “by design” (requires -24 suffix)
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
STANDARD MATERIAL LIST
1
2
3
4
5
PART
Lever and grip
Stem packing
Stem bearing
Ball
Seat (2)
6
Retainer
7
8
9
10
11
Gland nut
Stem
Lever nut
Body seal
Body
MATERIAL
304 SS w/vinyl
MPTFE
RPTFE
Nickel 200, ASTM-B162
RPTFE
Nickel 200, ASTM-B160 (1/2” to 1”)
Nickel CZ100, ASTM-A494 (1.5” to 2”)
A276-316
Nickel 200, ASTM-B160
18-8 SS
PTFE (1.5” & 2”)
Nickel CZ100, ASTM-A494
(SUFFIX)
-01
-P -01-T -01-02-04-07-14-15-16-18-21-24-27-30-32-35-39-45-46-48-49-50-56-58-60-
OPTION
Standard Configuration
BSPP (Parallel) Thread Connection
BSPT (Tapered) Thread Connection
Stem Grounded
2.25” Stem Extension (Carbon Steel, Zinc Plated)
Steel Tee Handle
Side Vented Ball (Uni-Directional)
Wheel Handle, Steel
Chain Lever - Vertical
Plain Yellow Grip
UHMWPE Seats (Non-PTFE)
Graphite Packing (fire safe “by design”)
SS Latch-Lock Lever & Nut
Cam-Lock and Grounded
SS Tee Handle & Nut
PTFE Trim
SS Hi-Rise, Locking Wheel Handle, SS Nut
Less Lever & Nut
Latch Lock Lever - Lock Close Only
SS Oval Handle (No Latch) & Nut
No Lubrication. Assembled Dry.
2.25” CS Locking Stem Extension
Multifill Seats & Packing
Chain Lever - Horizontal
Grounded Ball & Stem
SIZES
All
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
3/4” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
3/4” to 2”
1/2” to 2”
Pressure/Temperature Ratings - Page M-18, Graph No. 22
DIMENSIONS
PRODUCT
NUMBER
74-103-01
74-104-01
74-105-01
74-107-01
74-108-01
SIZE
A
B
C
D
E
WT.
1/2”
3/4”
1”
1.5”
2”
0.50
0.68
0.87
1.25
1.50
1.12
1.50
1.68
2.18
2.34
2.25
3.00
3.37
4.37
4.68
1.75
2.12
2.25
3.06
3.25
3.87
4.87
4.87
8.00
8.00
0.58
1.18
1.57
4.11
6.02
“Apollo” Flow Controls
REV. 22JUN16
industrial.apollovalves.com
Customer Service (704) 841-6000
H-7
75-100 SERIES
BRONZE PAD LOCKING BALL VALVE
Female NPT Thread, 600 CWP (psig), Cold Non-Shock.
150 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
MSS SP-110 compliant.
FEATURES
•
•
•
•
VARIATIONS AVAILABLE
Reinforced seats Blowout-proof stem design
May be padlocked in open or closed position with no change of hardware
Adjustable packing gland
• 75-140 Series
• 75-190 Series
(316 SS Ball & Stem)
(Pinned Retainer)
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
-01
-P -01-T -01-02-05-08-10-14-17-18-20-21-24-35-41-49-57-60-
OPTION
Standard Configuration
BSPP (Parallel) Thread Connection
BSPT (Tapered) Thread Connection
Stem Grounded
Plain Ball
90º Reversed Stem
SS Lever & Nut
Side Vented Ball (Uni-Directional)
Rough Chrome Plated - Bronze Valves
Plain Yellow Grip
Slot Vented Ball
UHMWPE Trim (Non-PTFE)
Graphite Packing
PTFE Trim
Automatic Drain (+50°F to 200°F limit. 125 psig max.)
No Lubrication. Assembled Dry.
Oxygen Cleaned
Grounded Ball & Stem
SIZES
All
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
Pressure/Temperature Ratings - Page M-10, Graph No. 4
STANDARD MATERIAL LIST
DIMENSIONS
PRODUCT
NUMBER
75-101-01
75-102-01
75-103-01
75-104-01
75-105-01
75-106-01
75-107-01
75-108-01
SIZE
A
B
C
D
E
WT.
1/4”
3/8”
1/2”
3/4”
1”
1.25”
1.5”
2”
0.43
0.50
0.50
0.87
0.87
1.00
1.25
1.50
1.10
1.10
1.10
1.68
1.68
1.98
2.14
2.35
2.22
2.22
2.22
3.35
3.35
3.97
4.31
4.67
1.74
1.74
1.74
2.20
2.20
2.56
2.74
2.93
2.87
2.87
2.87
3.81
3.81
5.50
5.50
5.50
0.80
0.77
0.70
2.03
1.83
3.48
4.23
5.69
1
2
3
4
5
PART
Lever and grip
Stem packing
Stem bearing
Ball
Seat (2)
6
Retainer
7
8
9
10
11
Gland nut
Stem
Lever nut
Body seal
Body
REV. 20JUL16
H-8
Customer Service (704) 841-6000
www.apolloflowcontrols.com
MATERIAL
Steel, zinc plated w/vinyl
MPTFE
RPTFE
B16 Brass, chrome plated
RPTFE
B16 Brass (1/4” to 1”)
B584-C84400 (1.25” to 2”)
B16 Brass
B16 Brass
Steel, zinc plated
PTFE (1.25” & 2”)
B584-C84400
“Apollo” Flow Controls
76-500 SERIES
STAINLESS STEEL BALL VALVE W/ SPRING RETURN HANDLE
Female NPT Thread, 1/4” to 1” 2000 CWP (psig), 1.25” to 2” 1500 CWP (psig). Cold Non-Shock.
150 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
MSS SP-110 compliant.
FEATURES
•
•
•
•
•
Spring return to close (-01)
Spring return to open (-08)
Carbon and Graphite Reinforced seats (MPTFE)
All components of lever are stainless steel
Operating torque is approximately three times standard valve torque
•
•
•
•
•
Blowout-proof stem design
Adjustable packing gland
Meets NACE MR0175 (2000) & MR0103 (2012)
Investment cast components
Fire safe “by design” (requires -24 suffix)
OPTIONS AVAILABLE: (More information in Section J)
• inimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
-01
-P -01-T -01-08-14-21-24-35-44-49-52-57-60-
OPTION
Standard Configuration
BSPP (Parallel) Thread Connection
BSPT (Tapered) Thread Connection
90º Reversed Stem
Side Vented Ball (Uni-Directional)
UHMWPE Seats (Non-PTFE)
Graphite Packing (fire safe “by design”)
PTFE Trim
Seal Welded
No Lubrication. Assembled Dry.
Two Tack Welds
Oxygen Cleaned
Grounded Ball & Stem
SIZES
All
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
Pressure/Temperature Ratings Page M-14, Graph No. 14 (1/4” to 1”)
Page M-13, Graph No. 12 (1.25” to 2”)
STANDARD MATERIAL LIST
DIMENSIONS
PRODUCT
NUMBER
76-501-01A
76-502-01A
76-503-01A
76-504-01A
76-505-01A
76-506-01
76-507-01
76-508-01
SIZE
A
B
C
D
WT.
1/4”
3/8”
1/2”
3/4”
1”
1.25”
1.5”
2”
0.37
0.37
0.50
0.68
0.87
1.00
1.25
1.50
1.03
1.03
1.12
1.50
1.68
2.00
2.18
2.75
2.06
2.06
2.25
3.00
3.37
4.00
4.37
5.50
7.00
7.00
7.00
7.00
7.00
9.00
9.00
9.00
1.26
1.25
1.31
1.98
2.35
3.96
4.78
6.66
“Apollo” Flow Controls
1
2
3
4
5
PART
Handle
Stem packing
Stem bearing
Ball
Seat (2)
6
Retainer
7
8
9
10
11
Gland nut
Stem
Lever nut
Body seal
Body
industrial.apollovalves.com
MATERIAL
SS w/vinyl
Multifill PTFE (MPTFE)
RPTFE
A276-316
Multifill PTFE (MPTFE)
A276-316 (1/4” to 1”)
A351-CF8M (1.25” to 2”)
A276-316
A276-316
18-8 SS
PTFE (1.25” to 2”)
A351-CF8M
Customer Service (704) 841-6000
H-9
7K-100-SV SERIES
BRONZE FULL PORT BALL VALVE W/ SAFETY VENT
Female NPT Threaded with Female NPT threaded drain port.
Recommended for water or air services.
Rated 0-200 psig; -20°F to 150°F
FEATURES
• Adjustable packing gland
• Mounting pad for easy actuator mounting
• Full port for full flow
• Reinforced seats
• Blowout-proof stem design
• Downstream venting in closed position TAPPING:
3/4" (10-24 NC)
1" TO 1.25" (1/4"-20 NC)
3/4" TO 1.25" SIZE
8
G
9
4
OPTIONS AVAILABLE: (More information in Section J)
E
10
2
1
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
14
5
D
(SUFFIX)
-01
-02-04-07-08-10-15-16-17-18-24-27-30-32-40-45-46-47-48-49-50-57-58-60-92-94-
ØA
13
12
F
TAPPING:
1.50" TO 2" (5/16"-24 UNF)
6
B
7
H
C
11
3
J
1.5" TO 2" SIZE
K
G
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
11
PART
Packing Gland
Lever nut
Seat
Stem bearing
Stem packing
Seat
O-ring
Spacer
Belleville washers
Stem
Ball
12
Retainer
13
14
Body
Lever/grip
MATERIAL
B16 Brass
Steel, zinc plated
RPTFE
RPTFE
RPTFE
RPTFE
Fluorosilicone
B16 Brass
Stainless Steel
B16 Brass
B16 Brass, chrome plated
B16 Brass (1/2” to 1”)
B584-C84400 (1.25” to 2”)
B584-C84400
Steel, zinc plated w/vinyl
OPTION
Standard Configuration
Stem Grounded
2.25” Stem Extension (Carbon Steel, Zinc Plated)
Steel Tee Handle
90º Reversed Stem
SS Lever & Nut
Wheel Handle, Steel
Chain Lever - Vertical
Rough Chrome Plated - Bronze Valves
Plain Yellow Grip
Graphite Packing
SS Latch-Lock Lever & Nut
Cam-Lock and Grounded
SS Tee Handle & Nut
Cyl-Loc and Grounded
Less Lever & Nut
Latch-Lock Lever - Lock in Closed Position Only
SS Latch-Lock Oval Handle & Nut
SS Oval Handle (No Latch) & Nut
No Lubrication. Assembled Dry.
2.25” CS Locking Stem Extension
Oxygen Cleaned
Chain Lever - Horizontal
Grounded Ball & Stem
Balancing Stop
2.25” CS Stem Extension & Balancing Stop
SIZES
All
1/2” to 2”
1/2” to 2”
1/2” to 1.25”
1/2” to 2”
1/2” to 2”
1/2” to 1.25”
3/4” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 1.25”
1/2” to 1.25”
1/2” to 1.25”
1/2” to 2”
1/2” to 2”
1/2” to 3/4”
1/2” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
3/4” to 2”
1/2” to 2”
1/2” to 2”
1/2” to 2”
DIMENSIONS
PRODUCT
NUMBER
7K-103-SV
7K-104-SV
7K-105-SV
7K-106-SV
7K-107-SV
7K-108-SV
SIZE
A
B
C
D
E
F
G
H
J
K
WT.
1/2”
3/4”
1”
1.25”
1.5”
2”
0.50
0.81
1.00
1.25
1.50
2.00
1.50
1.82
2.05
2.37
2.63
3.00
2.59
3.37
3.86
4.50
5.00
5.69
1.76
2.16
2.69
2.91
3.31
3.73
3.88
4.78
5.43
5.43
7.78
7.78
0.50
0.87
0.93
0.93
1.04
1.20
1.12
1.37
1.50
1.50
3.06
3.52
0.12
0.29
0.31
0.37
0.50
0.62
1.25
1.56
1.78
2.03
2.21
2.68
0.901
1.121
1.37 1
1.282
1.562
0.73
1.93
3.42
5.15
6.81
11.85
1 To Top of Mounting Pad
2 To Centerline of Mounting Pad
REV. 18APR16
H-10
Customer Service (704) 841-6000
www.apolloflowcontrols.com
“Apollo” Flow Controls
77-100-SV SERIES
BRONZE FULL PORT BALL VALVE W/ SAFETY VENT
Female NPT Thread, 0-200 psig, -20°F to 150°F
MSS SP-110 compliant.
FEATURES
• Blowout-proof stem design
• Adjustable packing gland
• Full port for full flow & min. pressure drop
• Reinforced seats • Mounting pad for easy actuator mounting
• Down stream venting in closed position
OPTIONS AVAILABLE: (More information in Section J)
TAPPING
1/4" - 3/4" (10-24 UNC)
1" & 1-1/4" (1/4-20 UNC)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
G
(SUFFIX)
-01
G
-02-04-07-08-10-15-16-17-18-24-27-30-32-36-40-45-46-47-48-49-50-57-58-60-
BDR
F
E
2
11
1
10
9
4
15
5
D
8
OA
TAPPING
1/4" - 3/4" (10-24 UNC)
1" & 1-1/4" (1/4-20 UNC)
13
7
B
12
6
G
14
3
C
F
G
1-1/2" - 2"
5/16"- 24 UNF
15
14
D
DIMENSIONS
PRODUCT
NUMBER
77-101-SV
77-102-SV
77-103-SV
77-104-SV
77-105-SV
77-106-SV
77-107-SV
77-108-SV
OPTION
Standard Configuration
Stem Grounded F
2.25” Stem Extension (Carbon Steel, Zinc Plated)
Steel Tee Handle
1-1/2" - 2"
5/16"- 24 UNF
90º Reversed Stem
SS Lever & Nut
Wheel Handle, Steel
Chain Lever - Vertical
Rough Chrome Plated - Bronze Valves
Plain Yellow Grip
Graphite Packing
SS Latch-Lock Lever & Nut
Cam-Lock and Grounded
SS Tee Handle & Nut
SS High-Rise Round Handle & Nut
Cyl-Loc and Grounded
Less Lever & Nut
Latch Lock Lever - Lock in Closed Position Only
SS Oval Latch-Lock Handle & Nut
SS Oval Handle (No Latch) & Nut
No Lubrication. Assembled Dry.
2.25” CS Locking Stem Extension
Oxygen Cleaned
Chain Lever - Horizontal
Static Grounded Ball & Stem
SIZES
All
1/4” to 2”
1/4” to 1.25”
1/4” to 1.25”
1/4” to 2”
1/4” to 2”
1/4” to 1.25”
3/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 1.25”
1/4” to 1.25”
1/4” to 1.25”
1/4” to 1.25”
1/4” to 2”
1/4” to 2”
1/4” to 3/4”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
3/4” to 2”
1/4” to 2”
STANDARD MATERIAL LIST
SIZE
A
B
C
D
E
F
G
WT.
1/4”
3/8”
1/2”
3/4”
1”
1.25”
1.5”
2”
0.43
0.50
0.50
0.81
1.00
1.25
1.50
2.00
1.43
1.60
1.50
1.82
2.05
2.37
2.63
3.00
2.52
2.69
2.59
3.37
3.86
4.50
7.78
5.69
1.76
1.76
1.76
2.16
2.69
2.91
3.31
3.73
3.88
3.88
3.88
5.43
5.43
5.43
7.78
7.78
0.50
0.50
0.50
0.87
0.93
0.93
2.08
2.40
1.12
1.12
1.12
1.37
1.50
1.50
3.06
3.52
0.79
0.75
0.69
1.83
3.32
5.05
6.71
11.75
“Apollo” Flow Controls
industrial.apollovalves.com
1
2
3
4
5
PART
Packing gland
Lever nut
Seat
Stem bearing
Stem packing
MATERIAL
B16 Brass
Steel, zinc plated
RPTFE
RPTFE
MPTFE
6
Seat
RPTFE
7
8
9
10
11
12
O-ring
Body seal
Spacer
Belleville washers
Stem
Ball
13
Retainer
14
15
Body
Lever/grip
Fluorosilicone
PTFE (1.25” to 2”)
B16 Brass
SS
B16 Brass
B16 Brass, chrome plated
B16 Brass (1/4” to 1”)
B584 C84400 (1.25” to 2”)
B584 C84400
Steel, zinc plated w/vinyl
Customer Service (704) 841-6000
H-11
78-124 & 78-125 SERIES
BRONZE 5-PORT FUEL SELECTOR BALL VALVE
Female NPT Thread. 50 CWP (psig).
FEATURES
•
•
•
•
• Blowout-proof stem design
• Adjustable packing gland
• PTFE seats
Stainless steel lever and nut
Non-lubricated design
Operation: Four selected inlets feed on common outlet.
Pointer on handle indicates the selected inlet
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
PART
Lever and grip
Stem packing
Stem bearing
Ball
Seat (4)
Gland nut
Stem
Lever nut
Retainer (3)
Body
PRODUCT
NUMBER
78-124-01
78-125-01A
H-12
MATERIAL
304 SS w/vinyl
MPTFE
RPTFE
B16 Brass, chrome plated
PTFE
B16 Brass
B16 Brass
304 SS
B16 Brass
B584-C84400
SIZE
A
B
C
D
E
F
G
H
WT./100
1/2”
3/4”
0.50
0.75
1.26
1.53
2.52
3.12
2.27
2.87
3.53
3.87
1.12
1.53
10-24
1/4-20
1.40
1.98
106
264
Customer Service (704) 841-6000
www.apolloflowcontrols.com
“Apollo” Flow Controls
78-248, 250, 256 & 438 SERIES
BRONZE THREADED SURFACE MOUNT BALL VALVE
Female NPT Thread, 600 CWP (psig), Cold Non-Shock.
150 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
MSS SP-110 compliant.
FEATURES
• Blowout-proof stem design
• Adjustable packing gland
• Two piece body
• Reinforced seats OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
-01
-T -01-04-07-10-14-15-17-27-30-32-35-41-56-57-
OPTION
Standard Configuration
BSPT (Tapered) Thread Connection
2.25” Stem Extension (Carbon Steel, Zinc Plated)
Steel Tee Handle
SS Lever & Nut
Side Vented Ball (Uni-Directional)
Wheel Handle, Steel
Rough Chrome Plated - Bronze Valves
SS Latch-Lock Lever & Nut
Cam-Lock and Grounded
SS Tee Handle & Nut
PTFE Trim
Automatic Drain (+50°F to 200°F limit. 125 psig max.)
Multifill Seats & Packing
Oxygen Cleaned
SIZES
All
1/4” to 3/4”
1/4” to 3/4”
1/4” to 3/4”
1/4” to 3/4”
1/4” to 3/4”
1/4” to 3/4”
1/4” to 3/4”
1/4” to 3/4”
1/4” to 3/4”
1/4” to 3/4”
1/4” to 3/4”
1/4” to 3/4”
1/4” to 3/4”
1/4” to 3/4”
Pressure/Temperature Ratings - Page M-10, Graph No. 4
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
PART
Lever and grip
Stem packing
Stem bearing
Ball
Seat (2)
Retainer
Gland nut
Stem
Lever nut
Body
PRODUCT
NUMBER
78-248-01
78-250-01
78-256-01
78-438-01
MATERIAL
Steel, zinc plated w/vinyl
MPTFE
RPTFE
B16 Brass, chrome plated
RPTFE
B16 Brass
B16 Brass
B16 Brass
Steel, zinc plated
B584-C84400
SIZE
A
B
C
D
E
F
G
WT.
1/4”
3/8”
1/2”
3/4”
0.43
0.50
0.50
0.68
1.12
1.12
1.12
1.50
2.25
2.25
2.25
3.00
1.78
1.78
1.78
2.12
3.87
3.87
3.87
4.87
0.93
0.93
0.93
1.06
1.87
1.87
1.87
2.12
0.68
0.68
0.65
1.40
“Apollo” Flow Controls
industrial.apollovalves.com
Customer Service (704) 841-6000
H-13
78-257 THRU 78-267 SERIES
BRASS & BRONZE INSTRUMENTATION BALL VALVE
Male x Female NPT Thread. 400 CWP (psig), Cold Non-Shock.
Air & Liquid Service Rating.
FEATURES
•
•
•
•
• Plated steel tee handle
• PTFE seats
• Compact design
Micro-finish ball
Nitrile stem seal
Optional mixed end fittings available
Blowout-proof stem design
DIMENSIONS
TEE
HANDLE
NUMBER
78-260-05
78-261-05
SIZE
E
C V*
WT.
BRASS INSTRUMENTATION BALL VALVE
1/8”M x 1/8”F 0.21 0.37 1.43 0.87 1.25
1/4”M x 1/4”F 0.31 0.43 1.43 0.87 1.25
4.0
5.5
0.20
0.19
E
C V*
WT.
BRASS INSTRUMENTATION BALL VALVE
1/8”M X 1/8”F 0.21 0.37 1.43 0.75 N/A
1/4”M X 1/4”F 0.31 0.43 1.43 0.75 N/A
4.0
5.5
0.20
0.19
SCREW
SLOT
NUMBER
78-262-05
78-263-05
SIZE
A
A
B
B
C
C
D
D
*The Cv factor is the gallons of water per minute that the valve will pass with a 1 psig pressure drop.
DIMENSIONS
SCREW
SLOT
NUMBER
78-257-01
78-258-01
LEVER
HANDLE
NUMBER
78-267-01
SIZE
E
C V*
WT.
BRONZE INSTRUMENTATION BALL VALVE
1/8”M x 1/4”F 0.21 0.80 1.60 0.72 N/A
1/4”M x 1/4”F 0.31 0.80 1.60 0.72 N/A
4.0
5.5
0.19
0.19
C V*
WT.
5.5
0.20
SIZE
A
A
B
B
C
C
D
D
E
BRONZE INSTRUMENTATION BALL VALVE
1/4”M X 1/4”F 0.25 0.65 1.45 0.93 1.37
*The Cv factor is the gallons of water per minute that the valve will pass with a 1 psig pressure drop.
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
10
PART
Lever and grip
Drive pin
O-Ring
Stem
Seat (2)
Stem boss
Ball*
Stem screw
Retainer
Body
MATERIAL
Steel, zinc plated w/vinyl
Steel, zinc plated
Nitrile
B16 Brass
PTFE
B16 Brass
B16 Brass
Steel, zinc plated
B16 Brass
B16 Brass or B584-C84400
* Chrome Plated Ball In Bronze Valves.
Pressure/Temperature Ratings - Page M-10, Graph No. 3
H-14
Customer Service (704) 841-6000
www.apolloflowcontrols.com
“Apollo” Flow Controls
78-621 THRU 78-625 SERIES
BRONZE IRRIGATION BALL VALVE
Female NPT Thread. 600 psig Water, Cold Non-Shock.
FEATURES
•
•
•
•
• Adjustable packing gland
• Automatic Draining in the Off Position
• Stainless steel underground curb stop handle
Two piece body
RPTFE seats and stuffing box ring
Temperature range: +50ºF to +400ºF
Blowout-proof stem design
STANDARD MATERIAL LIST
1
2
3
4
5
6
7
8
9
PART
Head adapter
Stem packing
Stem bearing
Ball
Seat (2)
Body seal
Gland nut
Stem
Screw
10
Retainer
11
Body
MATERIAL
A351-CF8M
MPTFE
RPTFE
B16 Brass, chrome plated
RPTFE
PTFE (1.25” to 2”)
B16 Brass
B16 Brass
SS
B16 Brass (3/4” to 1”)
B584-C84400 (1.25” to 2”)
B584-C84400
Pressure/Temperature Ratings - Page M-10, Graph No. 4
Drain Port
Caution: Do not use where drained media could cause damage.
See options section (option -41) for description of Auto-Drain feature.
DIMENSIONS
PRODUCT
NUMBER
78-621-01
78-622-01
78-623-01
78-624-01
78-625-01
SIZE
A
B
C
D
E
WT.
3/4”
1”
1.25”
1.5”
2”
0.68
0.87
1.00
1.25
1.50
1.47
1.66
1.98
2.12
2.35
2.96
3.34
3.97
4.28
4.67
2.40
2.53
3.00
3.18
3.37
1.81
1.81
2.50
2.50
2.50
1.59
1.92
3.57
4.68
6.11
“Apollo” Flow Controls
industrial.apollovalves.com
Customer Service (704) 841-6000
H-15
89-500 SERIES
CARBON STEEL BALL VALVE W/ SPRING RETURN HANDLE
Female NPT Thread, 1/4”to 1” 2000 CWP (psig), 1.25” to 2” 1500 CWP (psig). Cold Non-Shock.
150 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
MSS SP-110 compliant.
FEATURES
•
•
•
•
•
•
•
Spring return to close (“01” suffix)
Spring return to open (“08” suffix)
All components of lever are stainless steel
Zinc phosphate corrosion protection
Operating torque is approximately three times standard valve torque
Blowout-proof stem design
Adjustable packing gland
• Investment cast components
• Multifill seats
• Fire safe “by design” (requires -24 suffix)
VARIATIONS AVAILABLE
• 89-540 Series
(316 SS Ball & Stem)
OPTIONS AVAILABLE: (More information in Section J)
• Minimum quantities apply
• To specify an option, replace the “01” standard suffix with the suffix of the option.
• To specify multiple options, replace the “01” suffix with the desired suffixes in the
numerical order shown below. NOTE: Not all suffixes can be combined together.
(SUFFIX)
-01
-P -01-T -01-08-14-24-35-
OPTION
Standard Configuration
BSPP (Parallel) Thread Connection
BSPT (Tapered) Thread Connection
90º Reversed Stem
Side Vented Ball (Uni-Directional)
Graphite Packing (fire safe “by design”)
PTFE Trim
SIZES
All
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
1/4” to 2”
Pressure/Temperature Ratings Page M-14, Graph No. 13 (1/4” to 1”)
Page M-13 Graph No. 11 (1.25” to 2”)
STANDARD MATERIAL LIST
DIMENSIONS
PRODUCT
NUMBER
89-501-01A
89-502-01A
89-503-01A
89-504-01A
89-505-01A
89-506-01
89-507-01
89-508-01
H-16
SIZE
A
B
C
D
WT.
1/4”
3/8”
1/2”
3/4”
1”
1.25”
1.5”
2”
0.37
0.37
0.50
0.68
0.87
1.00
1.25
1.50
1.03
1.03
1.12
1.50
1.68
2.00
2.18
2.75
2.06
2.06
2.25
3.00
3.37
4.00
4.37
5.50
7.00
7.00
7.00
7.00
7.00
9.00
9.00
9.00
1.26
1.25
1.31
1.98
2.35
3.96
4.78
6.66
Customer Service (704) 841-6000
1
2
3
4
5
Part
Handle
Stem packing
Stem bearing
Ball
Seat (2)
MATERIAL
SS
Multifill PTFE
RPTFE
A108-CS chrome plated
Multifill PTFE
6
Retainer
A108-CS (1/4” to 1”)
A216-WCB (1.25” to 2”)
7
8
9
10
11
Gland nut
Stem
Lever nut
Body seal
Body
A108-CS
A276-316
Steel, Zinc Plated
PTFE (1.25” to 2”)
A216-WCB
www.apolloflowcontrols.com
“Apollo” Flow Controls
73-300 SERIES
STEEL DOUBLE UNION END BALL VALVE
Female NPT Thread, 3000 CWP (psig), Cold Non-Shock, 150 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
MSS SP-110 compliant.
FEATURES
•
•
•
•
•
•
•
VARIATIONS AVAILABLE
Heavy duty quarter turn lever
Reinforced seats and seals
Steel barstock design
Easy installation and maintenance
Blowout-proof stem design
Adjustable packing gland
Zinc phosphate corrosion protection
• 73-340 Series
(316 SS ball & Stem)
UL LISTING @ 250 PSIG MAX
• Guide YRPV: Gas shutoff valve for use with natural and
manufactured gases.
• Guide YSDT: LP gas shutoff valve.
• Guide YRBX: Flammable liquid shutoff valve.
Note: Listings apply ONLY to the standard -01 valves.
STANDARD MATERIAL LIST
PART
Lever and grip
Stem packing
Stem bearing
Ball
Tailpiece (2)
Retainer
Gland nut
8
Stem
9
10
11
12
13
14
15
Lever nut
Body
Seat (2)
Union nut (2)
Seat holder
Union seal (2)
Retainer seal
MATERIAL
Steel, zinc plated w/vinyl
RPTFE
RPTFE
ASTM A276, Type 316 Stainless Steel
A108-CS
A108-CS
A108-CS
ASTM A108, CS, zinc phosphate finish
or
ASTM A276, Type 316 Stainless Steel
Steel, zinc plated
A108-CS
RPTFE
A108-CS
A108-CS
RPTFE
RPTFE
Pressure/Temperature Ratings - Page M-15, Graph No. 15
DIMENSIONS
PRODUCT
NUMBER
73-301-01
73-302-01
73-303-01
73-304-01
73-305-01
73-306-01
73-307-01
73-308-01
1
2
3
4
5
6
7
SIZE
A
B
C
D
E
WT.
1/4”
3/8”
1/2”
3/4”
1”
1.25”
1.5”
2”
0.43
0.57
0.62
0.81
1.00
1.25
1.50
1.75
2.50
2.50
2.50
2.71
2.96
2.87
3.46
3.75
5.00
5.00
5.00
5.31
6.06
6.12
7.12
7.50
2.50
2.50
2.50
2.62
3.12
3.43
3.56
4.18
5.62
5.62
5.62
5.62
6.62
8.00
8.00
9.00
3.51
3.45
3.35
4.48
7.04
9.96
14.83
20.50
“Apollo” Flow Controls
industrial.apollovalves.com
Customer Service (704) 841-6000
H-17
73-400 SERIES
CARBON STEEL DOUBLE UNION END SOCKET WELD BALL VALVE
Socket Weld End, 3000 CWP (psig), Cold Non-Shock.
150 psig Saturated Steam.
Vacuum Service to 29 inches Hg.
MSS SP-110 compliant.
FEATURES
•
•
•
•
•
•
•
VARIATIONS AVAILABLE
Heavy duty quarter turn lever
Reinforced seats and seals
Steel barstock design
Easy installation and maintenance
Blowout-proof stem design
Adjustable packing gland
Zinc phosphate corrosion protection
• 73-440 Series
(316 SS Ball & Stem)
UL LISTING @ 250 PSIG MAX
• Guide YRPV: Gas shutoff valve for use with natural and manufactured gases.
• Guide YSDT: LP gas shutoff valve.
• Guide YRBX: Flammable liquid shutoff valve.
Note: Listings apply ONLY to the standard -01 valves.
STANDARD MATERIAL LIST
1
2
3
PART
Lever and grip
Stem packing
Stem bearing
4
Ball
5
6
7
Seat (2)
Retainer
Gland nut
8
Stem
9
10
11
12
13
14
15
Lever nut
Body
Tail Piece (2)
Union nut (2)
Seat holder
Union seal (2)
Retainer seal
MATERIAL
Steel, zinc plated w/vinyl
RPTFE
RPTFE
ASTM A108, Carbon Steel, Chrome Plated or
ASTM A276, Type 316 Stainless Steel
RPTFE
A108-CS
A108-CS
ASTM A108, CS, zinc phosphate finish or
ASTM A276, Type 316 Stainless Steel
Steel, zinc plated
A108-CS
A108-1018
A108-CS
A108-CS
RPTFE
RPTFE
Pressure/Temperature Ratings - Page M-15, Graph No. 15
DIMENSIONS
PRODUCT
NUMBER
73-403-01
73-404-01
73-405-01
73-406-01
73-407-01
73-408-01
SIZE
A
B
C
D
E
F
G
WT.
1/2”
3/4”
1”
1.25”
1.5”
2”
0.62
0.81
1.00
1.25
1.50
1.75
2.50
2.71
2.93
2.87
3.46
3.75
5.00
5.31
6.06
6.12
7.12
7.50
2.50
2.62
3.12
3.43
3.56
4.18
5.62
5.62
6.62
8.00
8.00
9.00
0.43
0.56
0.68
0.81
0.81
1.06
0.855
1.065
1.330
1.675
1.915
2.406
3.35
4.48
7.04
9.96
14.83
20.50
REV. 04APR16
H-18
Customer Service (704) 841-6000
www.apolloflowcontrols.com
“Apollo” Flow Controls
489-100-A SERIES
CARBON STEEL LP-GAS BALL VALVE
Female NPT Thread, 1/4” to 1” 2000 CWP (psig), 1.25” to 2” 1500 CWP (psig), 2.5” to 3” 1000 CWP (psig) Cold Non-Shock.
250 psig LP-Gas. 150 psig Saturated Steam.
Vacuum Service to 29 in. Hg.
MSS SP-110 compliant.
FEATURES
•
•
•
•
•
•
•
VARIATIONS AVAILABLE
UL Listed for LP-Gas, natural gas and flammable liquid to 250 psig • 489-140-01 Series with 316 SS Ball and Stem, UL Listed as noted above
Reinforced seats Mounting pad for easy actuator mounting
UL LISTINGS
Investment cast components
• Guide YSDT: LP-Gas shut-off valve.
Blowout-proof stem design
• Guide YRPV: Gas shut-off valve for use with natural and manufactured gases.
Adjustable packing gland
• Guide YRBX: Flammable liquid shutoff valve.
Zinc phosphate corrosion protection
• Guide MHKZ: No. 6 oil at 250ºF.
STANDARD MATERIAL LIST
1
2
3
PART
Lever and grip
Stem packing
Stem bearing
4
Ball
5
Seat (2)
6
Retainer
7
8
9
10
11
Gland nut
Stem
Lever nut
Body seal
Body
MATERIAL
Steel, zinc plated w/vinyl
RPTFE
RPTFE
A108-CS Chrome Plated or ASTM A276
316 SS
RPTFE
A108-12L14 (1/4” to 1”)
A216-WCB (1.25” to 3”)
A108-12L14
A108-12L14 or A276-316 SS
Steel, zinc plated
PTFE (1.25” to 3”)
A216-WCB
Pressure/Temperature Ratings Page M-14, Graph No. 13 (1/4” to 1”)
Page M-13, Graph No. 11 (1.25” to 2”)
DIMENSIONS
PRODUCT
NUMBER
489-101-01A
489-102-01A
489-103-01A
489-104-01A
489-105-01A
489-106-01
489-107-01
489-108-01
489-109-01
489-100-01
SIZE
A
B
C
D
E
F
G
WT.
1/4”
3/8”
1/2”
3/4”
1”
1.25”
1.5”
2”
2.5”
3”
0.37
0.37
0.50
0.68
0.87
1.00
1.25
1.50
2.50
2.50
1.03
1.03
1.12
1.50
1.68
2.00
2.18
2.75
3.37
3.37
2.06
2.06
2.25
3.00
3.37
4.00
4.37
5.50
6.75
6.75
1.75
1.75
1.81
2.12
2.25
2.62
3.05
3.24
4.12
4.12
3.87
3.87
3.87
4.87
4.87
5.50
8.00
8.00
8.00
8.00
0.50
0.50
0.50
0.87
0.87
0.93
0.93
0.93
2.75
2.75
1.12
1.12
1.12
1.37
1.37
1.50
1.50
1.50
3.37
3.37
0.58
0.54
0.63
1.27
1.63
3.06
3.98
5.99
15.57
16.79
“Apollo” Flow Controls
industrial.apollovalves.com
Customer Service (704) 841-6000
H-19
SECTION H - SPECIALTY BALL VALVES
REVISIONS
PAGE
H-5
H-18
H-10
H-7
H-8
H-20
DATE
04APR16
04APR16
18APR16
22JUN16
20JUL16
DESCRIPTION
Removed reference to Pressure-Temperature Graph 4
Added reference to Pressure-Temperature Graph 15
Corrected dimensions and drawing
Added -39 option to option table.
Added -21 and -35 options to option table.
Customer Service (704) 841-6000
www.apolloflowcontrols.com
“Apollo” Flow Controls