INSTRUCTIONS
BLADE
AND
FOR
TEAR DROP
Box includes: (1) ProFlag™ Pole, (1) ProFlag™ Fabric Flag and (1) Professional ProFlag™ Carry Bag
Also includes one of following accessories: (1) Deluxe Folding Base Stand
or (1) Deluxe Ground Stake
POLE ASSEMBLY
Blade: 11’: ( 4 segments )
Blade: 16’: ( 5 segments )
Step 1. Remove all pole segments from the carry bag
Blade: 21’: ( 6 segments )
Step 2. (2a) Starting with the largest diameter segment,
Tear Drop: 9’: ( 4 segments )
wedge the bottom (solid) segment flag pole angled to the
ground. (2b) Using the next smaller diameter segment,
insert the solid end into
the top of the larger
sized segment.
Tear Drop: 11’: ( 4 segments )
Tear Drop: 14’: ( 5 segments )
Note: To ensure proper
fit, ensure segments
are fully inserted.
Step 3. Repeat until all
segments are connected.
2a.
2b.
3.
BLADE FLAG FABRIC / POLE ASSEMBLY
Step 1. Keeping the pole wedged to the ground,
insert top of the pole into bottom of flag fabric
pocket.
Step 2. Work flag fabric down until end of pole
completely reaches end of the flag fabric pole
pocket. This will ensure best and proper flag fit
on pole.
1.
Note: Working the fabric down slowly makes it
easier to slip flag fabric completely through.
3.
Step 3. Pressing and holding the flag fabric
against the pole, use the other hand and attach
the hook on the flag fabric cord to the eyelet on
the pole.
Note: To take ProFlag™ assembly down,
follow steps in reverse order.
2.
Continued to next page
© Copyright 2008 International E-Z UP, Inc. USA. All rights reserved. www.ezup.com
TEAR DROP FLAG FABRIC / POLE ASSEMBLY
Step 1. Keeping the pole wedged to the ground,
insert top of the pole into bottom of flag fabric
pocket.
Step 2. Work flag fabric down until end of pole
completely reaches end of the flag fabric pole
pocket. This will ensure best and proper flag fit
on pole.
1.
Note: (2b) Curling the pole at the end and working the fabric down slowly makes it easier to slip
flag fabric completely through.
3.
Step 3. Pressing and holding the flag fabric
against the pole, use the other hand and attach
the hook on the flag fabric cord to the eyelet
on the pole.
2.
4.
Step 4. Adjust strap to the desired tension.
Do not over tighten strap.
Note: To take ProFlag™ assembly down,
follow steps in reverse order.
2b.
FLAG POLE / DELUXE FOLDING BASE – DELUXE GROUND STAKE ASSEMBLY
Ground Base Open and set Deluxe
Folding Base on
ground at desired
location. Insert flag
pole into Deluxe
Folding Base stand.
Note: 21’ pole base stand uses
included adapter.
Stake - Hammer
stake into ground.
Insert the flag pole into
Deluxe Ground Stake.
Note: 21’ pole - ground
stake, cap provided for
driving stake into
ground. Remove cap
prior to installing flag
pole.
Blade: 11’ / 16’
Tear Drop: 9’ / 11’ / 14’
Blade: 21’
Warning: Do not set up within 30 feet of power lines. Do not use in electrical storms or high winds.
Covered under one or more of the following patents: 4,607,656; 4,924,896; 5,244,001; 5,421,356; 5,485,863;
INTERNATIONAL E-Z UP, INC.
5,490,533; 5,511,572; 5,632,292; 5,632,293; 5,794,546; 5,797,412; 5,813,425; 5,865,127; 5,921,260; 5,934,301;
1601 Iowa Avenue, Riverside, California 92507 USA
Voice (951) 781-0843 • Fax (951) 781-0586
6,041,800; 6,070,604; 6,076,312; 6,129,102; 6,138,702; 6,192,910; 6,230,729; 6,240,940; 6,431,193; 6,439,251;
6,601,599; 95-704390; 94/2354; 91461; 132167; 95/0693; 95/6140; 95/6141; 84107895; 684,978; 2123096;
190486; 289754; 215344; 701077; 2128935; 2949648; 48648; DE 695 10 919 T2; WO96/03561.International
Design Registration No. DM/009515 Benelux Design Registration No. 16959-04. Other US and foreign patents
pending.
© Copyright 2008 International E-Z UP, Inc. USA. All rights reserved. www.ezup.com IN.PF.BLTD.0118
www.ezup.com
800-45 SHADE
8 0 0 - 4 5 7 - 4 2 3 3
13963 A