New designed STAHL barrier washing machines DIVIMAT D
_____________________________________________________________________________________
The new designed barrier washer DIVIMAT “D” is the result of a long experience
in production of barrier washing machines.
We are producing barrier washers since more than 30 years. Acc. this long
term experience we have developed the newest generation DIVIMAT “D”
We took into this new development all design features and experiences of
our production in barrier washers and our production experience of more
than 35 years in high spin and free standing washer extractors ATOLL.
The result is a new designed barrier washer with a recommendable price and
features which can be delivered only from us!
¾
PRODUCTION PLANT
If you are choosing a STAHL product you are sure that this will be produced in Germany, with an experience of
high quality products since 1909. The production plant is located in Sindelfingen near Stuttgart.
The STAHL Company is family owned, now in the 4th Generation. All of the STAHL family, employers and family
members are proud to produce these high quality products in Germany for more or less the whole world. It would
be a pleasure for all of us if we were allowed to offer our products to your company and to welcome you in the
future to visit our production plant.
Yours sincerely
STAHL Wäschereimaschinenbau GmbH
Visit us at www.stahl-laundry-machines.com!
Uwe Stahl
Manager
PS: We offer the complete range of laundry technology. Please contact us for more information.
Telefon:
Fax:
Mobil
Email
+ 49 – 7031 – 73840
+ 49 – 7031 – 38 18 44
+ 49 – 163 – 36 13 708
[email protected]
DIVIMAT D
The hygiene washer-extractors with a stable
double-sided drum suspension.
For the processing of linen according to hygiene
requirements in hospitals, homes and laundries.
DIVIMAT D – the hygiene washer-extractors
as through loading models
The DIVIMAT D hygiene washer-extractors were developed to deal
with the special problem of linen care in homes and hospitals. Care
institutions and laundries processing this type of linen are required
to divide their premises into a clean and unclean area. For this
purpose these washer-extractors are installed into a dividing wall.
The through-loading models are loaded from the front of the
machine on the unclean side and unloaded from the clean side,
which is directly opposite. Loading and unloading is easy and userfriendly by means of ergonomically designed large doors and a
drum that locks itself into position.
At a glance:
> at wall installation is possible > extremely stable double-sided
suspension > large drain valve > large loading and unloading
openings > automated current and water entry depending on linen
type and load size > drum opening stops automatically at door
opening > frequency converter controlled PTS drive > drums and
detergent container made of EDELSTAHL stainless steel > effective
overflow rinse system > cool-down procedure > infinitely variable
temperature control > maximum vibration-absorption by means of a
pneumatic spring / shock absorber combination > infinitely variable
revolution speed > error diagnostic system > freely programmable
FREEpro control unit > starting time pre-select
New, well-designed and
absolutely user friendly: the
large, side hinged doors.
No more dripping water caused by
top-hinged doors, no more cumbersome dragging out linen through drum
openings that are too small.
The drum of the DIVIMAT
automatically adjusts and locks itself
at the right access position. The
drum-flap can conveniently be opened
with one hand only.
Made by STAHL
Technical Data
Type DIVIMAT D
Drum volume
Door opening
Load weight (dry)*
Revolution speed variable upto
g-factor
Scoop ribs
Connected loads
Electric heating (opt. warm-w.)
Steam-HP/LP (4 - 6 bar)
Installation connections
Water ¾’’ thread
Steam HP /LP ½’’ thread
Water drain
Compressed air
Space requirements
Width
Depth
Heigth
Net weight
190
220
400
350
600
800
183
715 x 575
19
1000
420
5
220
715 x 575
22
1000
420
5
373
715 x 575
40
1000
420
5
335
715 x 575
35
900
408
6
575
715 x 575
60
900
408
6
763
715 x 575
80
900
408
6
18 (12)
18
18 (12)
18
2 x 18 (12/26)
36
2 x 18 (12/26)
36
2 x 18 (12/26)
60
2 x 18 (26)
80
DN
DN
DN
bar
20
20
70
6
20
20
70
6
25
25
70
6
25
25
70
6
25
25
70
6
25
25
100
6
mm
mm
mm
kg
1200
960
1525
750
1200
960
1525
770
1560
960
1525
875
1200
1250
1600
930
1560
1250
1600
1200
1920
1250
1600
1500
l
mm
kg
rpm
kW
kg/h(~)
*depending on load ratio
STAHL Wäschereimaschinenbau GmbH, Postfach 60 01 44, D-71050 Sindelfingen
Phone +49 (0)7031/7 38 40, Fax +49 (0)7031/38 18 44 + 38 81 33,
www.stahl-laundry-machines.com, E-Mail: [email protected]
Subject to alterations and mistakes. The illustrated machines may include optional features.
We are a company with a long tradition and are now manufacturing
laundry machines in the fourth generation. We are a dynamic,
competent family operation with clear principles. Quality is the most
important one, closely followed by innovation and the demand for
economically and technically perfected products.
Our local team vouches for these principles,
as Made by STAHL is for us implies the
quality inherent in Made in Germany.