8FE 802.3at + 2 Gigabit SFP L2 Managed Industrial PoE Switch

8FE 802.3at + 2 Gigabit
SFP L2 Managed
Industrial PoE Switch
IGS-1051
H/W Version: 1
The LevelOne IGS-1051 is an 8FE 802.3at + 2 Gigabit SFP L2 Managed Industrial PoE Switch.
It is designed with Hardened Marvell IC and Hardened POE controller to ensure
performance in harsh environment. With LevelOne Cold-Design technology, it will not only
power up your PD and also reduce its excessive heat to a minimum.
The LevelOne IGS-1051 is the best to be used in municipal, city surveillance, automation,
transportation, mining, heavy Industrial factory and other factory assembly lines
where needs PoE functionality and it can be used in extreme environments with an
operating temperature range of -40°C to 75°C.
Key Features
-
Advanced PoE Port Status and Configuration
Provides per port 30W, total 240Watts POE power connection.
POE Auto Checking features for PD Auto Recovery.
Easy network Management through web, CLI, and Telnet.
Virtual Cable Tester
STP/ RSTP Configuration
IGMP snooping V1, V2c, V3
Port-based VLAN, IEEE 802.1Q VLAN
QoS and DiffServ
SNMP v1/v2c/v3
Login security function to block unauthorized access
Network security connection in HTTP/ HTTPS, SSH/ SSL
Alarm through trap, syslog, e-mail, relay output
Port mirroring
Traffic control of multicast and broadcast
SPECIAL PROJECT MODEL
Technical Specification
GENERAL SPECIFICATION
Standard Compliance
•
•
•
•
•
•
•
•
•
•
•
•
•
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3z 100/1000Base-X Fiber
IEEE802.3x Flow Control and Back Pressure,
IEEE802.3af for POE
IEEE802.3at for POE+
IEEE 802.1ab LLDP (Link Layer Discovery)
IEEE 802.1D STP/MAC Bridges
IEEE 802.1w RSTP
IEEE 802.1Q VLAN
IEEE 802.1p Class of Service, QoS
IEEE 802.1X Access control and Authentication
IEEE 802.1ad Stacked VLAN, Q-In-Q
Port Configuration
8FE IEEE802.3af/at + 2 Gigabit SFP
Switch Architecture
Store and Forward
Switch Fabric
5.6 Gbps
MAC Address Table
8K; Auto learning
PoE SPECIFICATION
PoE Standard
IEEE802.3af, IEEE802.3at Max 30W per port
PoE Protection
PoE Over Load/Heat Protection, PoE Over Current Protection
Power Budget
Up to 200W at 48VDC
Advanced PoE Features
PoE Port Configuration, PoE Forced Mode, PoE Auto Checking,
PoE Scheduling
L2 FEATURES
VLAN
QoS
IGMP
Bandwidth Control
Spanning Tree
•
•
•
Port Based VLAN
IEEE 802.1Q Tag VLAN up to 256 VLAN/4096 VLAN ID
Double Tag VLAN (Q in Q)
Class of Service:
•
•
•
Port-Based QoS
IEEE802.1p VLAN priority QoS
IPv4/IPv6 DSCP classifier
•
IGMP Snooping and Query v1, v2
Ingress Rate Limit and Egress Traffic Shaping
•
Standard Spanning Tree 802.1d
www.level1.com I one world_one brand_one level_
All mentioned brand names are registered trademarks and property of their owners.
Technical specifications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.
SPECIAL PROJECT MODEL
•
Trunking
Rapid Spanning Tree (RSTP) 802.1w
Link Aggregation Control Protocol (LACP) IEEE 802.3ad
Security
•
IEEE802.1X: RADIUS authentication
MANAGEMENT
Port Mirroring
Port Mirroring Mode:
•
•
•
Other Management
Features
RX
TX
Both
SNMP v1/2c/3, HTTP/HTTPs, SSH, System Log, SMTP, DNS, LLDP,
Relay Alarm (1A@24VDC)
ENVIRONMETAL
Input Power
48VDC 1+1 Redundant Power Input
Operating Temperature
-40°C to 75°C
Relative Humidity
5% to 95% non-condensing
Installation
Wall Mount or DIN-Rail ; IP30 Housing
REGULATORY APPROVALS
EMI
•
•
•
•
FCC
CE
VCCI
EN55022/24 (ITE equipment)
Safety
•
CE EN60950-1
Stability
•
IEC60068-2-32 (Free Fall), IEC60068-2-27 (Shock),
IEC60068-2-6 (Vibration)
Order Information
IGS-1051
8FE 802.3at + 2 Gigabit SFP L2 Managed Industrial PoE Switch
www.level1.com I one world_one brand_one level_
All mentioned brand names are registered trademarks and property of their owners.
Technical specifications are subject to change without notice.
© Copyright Digital Data Communications GmbH. All Rights Reserved.