Celere HS
Schollis Grip
Cinec Award 2016 „Optics“
for the Celere HS Set
Dear H.I.T. Fan,
last years we won fans all over the
globe, and the cinec award as bonus.
Become part of our story about awesome film lenses and grip.
Kind regards,
Content
Celere HS Set3,4
Celere HS 18.5mm T1.55
Celere HS accessories6
The Camera Sled7
The Special Car Mount8
Ground Level9
Hang Me Up10
WCU 3/4 Monitor Adapter10
BNC Easy Click11
FaderLux ViewingGlass12
Off Set & Lifter13
Multi Euro-adapter14
Tripod adapter 150mm 15
Long off-set 475mm15
Base Plate16
Touch and Go16
Inch bolts16
Adapter Threads16
Index Schollis Grip17
Index Celere Lenses18,19
Merchants20
2
Catalog December 2016
Celere HS Set
The Celere Set was designed to please DoPs and became a Cinec Award
winner in the category optics.
It consists of four prime lenses and was made for the challenges of digital
cinematography. During the development international Directors of Photography were involved, resulting in excellent optical as well as mechanical
performance so that the daily on set demands such as swapping a lens will
be quick and fast, meaning “Celere”.
All lenses of the Core Set have the same weight, size and form. Therefore
little to no adjustment of the accessories is needed after changing a lens.
With 1050g (+/-10g) each, they are lightweight, robust and yet compact in
size.
The Celere HS Primes are designed for up to 8k RED
VistaVision (wide screen) and all have a high speed
of T1. 5. They have very little breathing, a nice pleasing Bokeh and no vignetting. With these characteristics they can cover up to any S35mm or Full Frame
sensor whether it is a film or digital camera.
The look is described by users as neutral to slightly warm with a bit of contrast. The look can be individualized through the use of 77mm filters and
interchangeable front lens elements. If you like it
classic, you can use our uncoated glass as well as
net diffusion behind the lens to give it more of that
analogue look.
Celere HS lenses are available in variable PL, CanonEF and Sony-E mount.
3
Catalog December 2016
Celere HS Set
4
Celere Lenses
25mm
36mm
50mm
85mm
Aperture Range
T/1.5- T/22
T/1.5- T/22
T/1.5- T/22
T/1.5- T/22
Focusing Range
25mm (9.8 inches) – ∞
33cm (13.0 inches) – ∞
48cm (18.9 inches) – ∞
100cm (39.4 inches) – ∞
Focus Scale
Fokus Markings
Fokus Markings
Fokus Markings
Fokus Markings
Fokus Markings
250°
250°
250°
250°
Front Diameter
85mm
85mm
85mm
85mm
Front Filter Thread
77mm
77mm
77mm
77mm
Length
108mm for full frame – 118mm
with extra ring for super 35
118/90 mm
118/90 mm
118/90 mm
Diameter
90 mm
90 mm
90 mm
90 mm
Camera Mount
PL, EF, E
PL, EF, E
PL, EF, E
PL, EF, E
Weight
1050 g (2.31 lb) +/- 10g
1050 g (2.31 lb) +/- 10g
1050 g (2.31 lb) +/- 10g
1050 g (2.31 lb) +/- 10g
Catalog December 2016
Celere HS 18.5mm T1.5
„When we first tested the prototype
we had this Wow Feeling. We felt we
created something
exordenary. It was
bright, so wide on the full frame sensor, sharp and little breathing that it took our breath
away.“
- Steven Kisilevich, Owner and
Product Developer
The first 18.5mm with real High
Speed T1.5 and covering Full
Frame. The breathing is outstanding little, the closefocus at
23cm. The gearing of the rings
matches with the Celere HS
set, the focus markings have
250°. It size is 126mm/96mm
with a weight of 1285g. The
Vario Mount System provides
quick and easy changes to PL,
EF and E.
18.5mm T1.5 with PL Mount
Protype from 09/16
We start to deliver in March 2017,
pre-orders can be placed.
5
Catalog December 2016
Celere HS accessories
The Celere lenses are designed with the unique Vario Mount system for
Mount changes within minutes in between PL, EF and E Mounts.
For reshimming while mount changes, we offer a set of standard shims.
Set of ten standard shims
(200400)
If you plan to keep your lenses for a long time, think about engraveing
them. They will look unique and be theft protected - Your name, Logo or
company name engraved can not be removed and get detected quickly
by crews on set.
Vario Mounts
Quick and simple changable mounts.
Additional PL Mount
(200200)
Addtional EF Mount
(200210)
Additional E Mount
(200220)
6
Costumized engravings
The front or distance ring can get
irremovable
engraved. Ask your
Dealer about it
when you order,
and we can make
you an offer depending on your
engravings.
Catalog December 2016
The Camera Sled
The camera sled we developed shines through in its high carrying capacity and is ideally suitable for heavy camera systems.
Thanks to our specially designed nylon rollers, it glides extremely easily and quietly. The guiderollers are mounted eccentrucally
and can be readjusted at any time.
The structure is completely out of aluminium. Through the use of
square tubing we have achieved a very high rigidity as well as
a low weight. The guide rails are bveled out of hardened steel.
They are Nickel-plated and thus shielded against oxidation. To
guard the rails against an impact they have been set slightly
inward.
The camera sled‘s ends have
magnetic dampeners which inhibit a sudden stop. If need be, the
magnetic brackets can be easily
unscrewd.
„DoPs asked us for a robust workinghorse slider which is quieter and
smoother. We then added a modular
design for the quickest mount changes,
secure rail extensions, perfect lowboy
adater and easy cleaning. Thus the camera sled was born.“
- Lars, Owner and Developer
One of its many features is
to mount it upside down (underslung). This is achieved
through the sled‘s precision
prism rails.
The camera guiede rails are
extendable as often as you like.
This is simple to do with very
little hands on. We developed
the sled ensuring that it can
be very easily cleaned.
The sled can be fully extended
by opening the toggle latches.
The core concept lies within its
7
modular design. Various fluidhead adapters can be quickly
changed, i.e. 100mm/150mm
bowl or Mitchell base.
The camera sled comes in
three common sizes:
65cm/26.6“ (100600),
95cm/37,4“ (100610),
120cm/49,2“ (100615).
Additionally we offer various
mounting accessories such as:
Step-less rotary joint for Euro-mount or Mitchell base, Euro-Spigot, Euro-shell, Mitchell
base, 28mm spigot adapters
an end-brackets for lighting
stands.
Mitchell base attached
(100625)
Catalog December 2016
Special Car Mount
(100700)
The Special Car Mount is suitable for one camera or alternatively Grip & Lighting equipment. With the available extension up to three cameras can be rigged. It has a load
capacity for up to 80 kilos (176 lbs.) and is perfectly suited for uneven surfaces, such as
car hoods. Rigging takes just a few minutes. After adjusting the camera, the Special Car
Mount has to be additionally secured (e.g. Ratchet straps).
The Special Car Mount has a high inertia thanks to its
own weight and the payload is distributed within a larger
area. This enables the Special Car Mount to absorb shakes and vibrations to a high extent.
The sole mechanical component is based on an adjustable system of pins. Up to 42 pins can be
inserted into the Special Car Mount. Each pin has an integrated magnet on the bottom side. To
protect the surface and to avoid any shifting, each pin is equipped with a rubber foot.
The Special Car Mont’s pin system is easily fixated with a central
locking device.
Every Special Car Mount contains six sets
of 42 pins each. The sets consist of the following lengths:
100mm, 150mm, 200mm, 250mm,
300mm and 350mm.
Thus, the Special Car Mount is freely height-adjustable and applicable for all kinds of smooth to uneven surfaces. The Special Car
Mount itself is only 120mm high – including the four-way-leveller.
Thanks to the four-way-leveller the framing of the image on the
camera may still be corrected and changed even after the Special
Car Mount has been locked down.
Pan, Tilt, Dutch – ready!
8
Foto: Knitterfisch
Catalog December 2016
Ground Level
(100760)
The Ground Level is an exceptionally flat pan option for cameras. Its height of 105mm allows the camera to be placed
almost directly on the ground.
„Well, when I was a grip we sometimes had to dig holes to get
low enough for the cameraman.
I don’t like digging, so I invented
the Ground level. Problem solved.”
From this vertical position of
0°, the camera can be moved
vertically by up to +90° and
then fixed. A completely horizontal 360° pan is nonetheless
possible.
The integrated shifting plate
allows the camera to be rotated by 180° on ground level and
a vertical pan from 0° to -90°.
- Joachim „Scholli“ Scholz,
Head of Grip
In order to achieve a stable base, the
swivel unit is mounted onto a 500 x
300mm anti-slip, multiplex screen
plate. An easily replaceable gas-filled
shock absorber facilitates vertical movement. This allows the Ground Level
to be positioned and adjusted simply,
quickly and effortlessly.
9
Catalog December 2016
Hang Me Up
Easy Rig Speed Adapter
WCU 3/4
Monitor Adapter
The WCU 3/4 monitor adapter enables attachment
of a monitor to the top of
the WCU unit. The adapter
is very sturdy thanks to its
metal construction, and allows the monitor to be raised, tilted and fixed in the
desired position.
Hang Me Up (HMU)
(100800)
The adapter is attached to
the wireless focussing system with two screws; 1/4” or
3/8” monitor screw connections are provided for. The
wireless transmission remains unaffected.
The HUM is a helper to insert
cameras to easyrigs. It consits
of a bolt which is to mount on
the easyrig, and a hull you fix at
the camera.
To hook, the hull needs to get
inserted in the bolt.Tto hang the
mounted camera out, press the
head.
The HMU was tested up to 80kg.
10
WCU-3 Monitor
Mount (100730)
WCU-4 Monitor
Mount (100740)
Catalog December 2016
BNC Easy Click
(100850)
Film shoots are a dynamic affair:
constant rebuilding is necessary,
and using a BNC cable is no different. Connector in - connector our
- and at some point, the female
connector gets ripped out. It‘s high
time that the pionees in technology
at Hanse-Inno Tech were called in
action!
With some camera types the BNC
connections are inverted, meaning that an adaptor (100853) is
neccessary. Fot some configurations it can be useful if the cable
is led out either to the left or the
right. There is also a (100854) on
which the BNC Easy Click can be
mounted.
The magnetic connector makes
attaching the cable to the camera
effortless. The connection is strong
enough to hold without any help,
and is even capable of withstanding
Assembly is very easy. Simply place the ring over the cable connector and use the Allen key provided
to tighten the screw.
jerks on the cable. But it is also easy
to remove, with a small tuning motion on the connector all that‘s needed. The conneciton will also break
if the puss is stronger, meaning the
female connector remains intact.
The basic version consists of a ring
for mounting on the camera and the
cable connector. The exterior of the
connector is knurled to provide a
better grip, and to make it easier to
hold. The magnets‘ poles are opposed, meaning that a slight turning
motion is eunough to effortlessly
break the connection.
11
Catalog December 2016
You can read the current setting by using the mark
on the knurled ring.
The FaderLux Viewing Glass is 60 mm in diameter and weighs 48 gr, comes with a padded travel
pouch and lanyard plus neoprene cover for wearing
it around the neck.
FaderLux
Viewing Glass
All the FaderLux´s metal parts are manufactured,
anodized and engraved by local companies in Hamburg, Germany.
Each Viewing Glass is assembled and calibrated by
hand in our workshop.
It is available in eight different colour combinations
and can get individual laser engraved.
For futher information and placing orders visit
www.faderlux.de
FaderLux Viewing Glass
The FaderLux Viewing Glass is a tool for DOPs, Gaffers, Electricians and First ADs which can be used
for checking contrast settings, for lamp adjustment,
F Stop / ND calculation and calculating cloud - sun
intervals.
The Viewing Glass´s density can be steplessly regulated by turning the knurled ring, so that you can
freely choose the grade of translucence. Engraved
onto the outside of the fixed ring is a scale marked
from 1.5 to 7, which indicates by how many Stops the
light transmission is reduced.
12
Catalog December 2016
Off-Sets
Euro Off-Set
(100350)
The length from the center of the
Euro-Mount to the center of the female Euro-Mount (receiving end)
is 475mm. Like all of our off-sets,
this arm is machined from solid
block of aluminium. Additionally
the Off-Set contains 6 x 3/8 inch
camera-screw mounting threads.
The Euro-Mount is machined from
aircraft grade hardened aluminium.
Rotating Euro Off-Set
(100360)
We developed this Euro-Mount to rotate easily and release without tilting. Therefore it can also be used to steer the
camera. The off set is machined from
a solid block of aluminium and thus is
able to withstand heavy loads. Just like
all our aluminium products the Rotating
Euro-Mount is hard coated, ensuring the
maximum resilience.
13
Bazooka Tube Lifter
(tba)
Lift your tube stageless and
without tilting, thanks to its
wheel pillowed design.
Catalog December 2016
Multi Euro-Adapter
Coupled Euro-Adapter
(100330)
(100310)
With a scaffold adapter (48mm dia.) and
28mm connecting pin (stud) or 25mm
connecting pin (100330). The Euro-adapter and the extension for the scaffold adapter are machined from aircraft grade
hardened aluminium, yet have the tensile
strength of steel. Depending on your needs,
the two stainless steel threaded studs are
easily exchangeable.
All of our Euro-Mounts are made from
hard-coated (anodized) aluminium.
Bolted together with the connecting-plate, it becomes an extremely lightweight
double ended Euro-adapter. You can
purchase our Euro-adapters individually
as well and order the connecting-plate
(coupler) later.
Dolly Adapter for the Multi
Euro-Adapter
(included)
Safety Disc
(100390)
Our safety disc is made from
aluminium. It has beautiful
ergonomic form and is therefore very easy to handle.
14
VA Euro Adapter
(100320)
Adapter Disc
(100311)
Euro adapter alumium hardcoat
(100310)
Catalog December 2016
Tripod Adapter 150mm
(100450)
This tripod adapter is turned and machined from solid aluminium. It contains thread for example to directly bolt on
a Euro-Mount. Additionally there are 2 x 3/8 inch screws
to directly Mount a base plate. Our locking nut is made
of Polyacetal and stainless steel. It is very easily fastened
with the inner ball bearings. The locking nut can also be
purchased individually.
Long off-set Length Centre/Centre 475mm
(100400)
This long off-set arm is compatible with all other manufacturers adapter plates, ie.
G-F.M. The off set additionally includes 6 x 3/8 inch
Mounting threads. You can
choose, whether you want to
buy the off-set arm as stand
alone, with Mitchell Mount,
with bowl adapter 150mm or
with bowl adapter 100mm.
Naturally this off-set arm is
machined from a block of
aluminium and hard-coated.
Mitchell Mount
(100405)
Tripot Adapter
(100450)
Bowl Adapter
150mm (100410)
100mm (100415)
Locking Nut
(100445)
15
Catalog December 2016
Adapter threads
(100200)
1/4 inch - 3/8 inch and vice versa
Who doesn´t know? I have 3/8 inch bolt but only a 1/4 inch
thread or just the opposite. With these two adapters there
will be no more future problems. These adapters are made
from stainless steel, therefore you´ll be well equipped for
your next production.
Touch and Go
(100520)
120x80 mm incl. 2 pieces
of 3/8´´ bolts
Base plate
600mm long
Inch bolts
(100010, 100100, 100110)
3/8 inch short and long,
1/4 Zoll short: all of our
screws are made from
stainless steel.
1/4 inch, lenght 9mm
3/8 inch, lenght 9mm
3/8 inch, lenght 20mm
16
(100500)
incl. Touch-and-go-plate with
bridge for 19mm rods.
Designed in 2003 by our developers this base plate can
be used on an O´Conner fluidhead as well as on a Sachtler
fluid-head through the use of
a touch-and-go-plate. Both
variations are continuously
adjustable.
Catalog December 2016
Index Schollis Grip
Item
Name
Number
17
100610
Camera Sled 95mm
100615
Camera Sled 125mm
100620
Camera Sled on either side Mounting with 28mm
connecting pin
100010
Inch bolts 1/4 inch, length 9mm
100100
Inch bolts 3/8 inch, length 9mm
100110
Inch bolts 3/8 inch, length 20mm
100625
Mitchell Mount for Camera Sled bottom side
100200
Adaptoer threads 1/4-3/8 - 3/8-1/4
100630
Rotation Mitchell Mount
100300
Euro adaptor Aluminum hartcoat
100635
Rotation Euro Mount
100310
Coupled Euro-adapter
100640
Euro Mount for Camera Sled bottom side
100311
Adaptor Plate
100650
Flightcase for Camera Sled 95mm
100660
Flightcase for Camera Sled 65mm
100320
VA Euro adaptor
100330
Multi Euro-adapter with a scaffold adapter (48mm
dia.) and 28mm connecting pin (stud) or 25mm
connecting pin
100670
Flightcase for Camera Sled 125mm
100700
Special Car Mount
100350
Euro Off Set Length Euro/Euro 430mm
100730
WCU-3 Monitor Mount
100360
Rotating Euro Off-Set
100740
WCU-4 Monitor Mount
100365
Rotation Euro adaptor
100760
Ground Level
100390
Safety Disc
100800
Hang Me Up for Easy Rig
100400
Long off-set Length Centre/Centre 475mm
100850
BNC Easy Click
100405
Mitchell Mount
100851
BNC Easy Click with BNC-Connector
100410
Bowl Mount 150mm
100852
BNC Easy Click with 90° BNC Connector
100415
Bowl Mount 100mm
100853
BNC-Connector
100445
Locking Nut
100854
BNC-90° Connector
100450
Tripod adaptor 150mm incl. Locking Nut
100500
Base plate 600mm
100520
Touch and Go 120x80 mm incl. 2 pieces 3/8´´ inch
bolts
100550
Low Shot Plate 18x160x450 incl. O´Conner mount
100600
Camera Sled 65mm
Catalog December 2016
Index Celere Lenses
Item
Name
Number
200010
Set of Celere HS (25, 36, 50, 85)
metric PL Mount
Set of Celere HS (25, 36, 50, 85)
200011
metric EF Mount
200012
Set of Celere HS (25, 36, 50, 85)
metric EF Mount
200020 Celere HS 25mm metric with PL Mount
200021 Celere HS 25mm metric with EF Mount
200022 Celere HS 25mm metric with E Mount
200030 Celere HS 36mm metric with PL Mount
200031 Celere HS 36mm metric with EF Mount
200112
Set of Celere HS (25, 36, 50, 85)
imperial EF Mount
200120 Celere HS 25mm imperial with PL Mount
200121
Celere HS 25mm imperial with EF Mount
200122 Celere HS 25mm imperial with E Mount
200130 Celere HS 36mm imperial with PL Mount
200131
Celere HS 36mm imperial with EF Mount
200132 Celere HS 36mm imperial with E Mount
200140 Celere HS 50mm imperial with PL Mount
200141
Celere HS 50mm imperial with EF Mount
200142 Celere HS 50mm imperial with E Mount
200032 Celere HS 36mm metric with E Mount
200150 Celere HS 85mm imperial with PL Mount
200040 Celere HS 50mm metric with PL Mount
200151
200041 Celere HS 50mm metric with EF Mount
200152 Celere HS 85mm imperial with E Mount
200042 Celere HS 50mm metric with E Mount
200160 Celere HS 18.5mm imperial with PL Mount
200050 Celere HS 85mm metric with PL Mount
200161
200051 Celere HS 85mm metric with EF Mount
200162 Celere HS 18.5mm imperial with E Mount
200052 Celere HS 85mm metric with E Mount
200060 Celere HS 18.5mm metric with PL Mount
Celere HS 85mm imperial with EF Mount
Celere HS 18.5mm imperial with EF Mount
200200 Celere HS additional PL Mount
200210 Celere HS additional EF Mount
200061 Celere HS 18.5mm metric with EF Mount
200062 Celere HS 18.5mm metric with E Mount
18
200110
Set of Celere HS (25, 36, 50, 85)
imperial PL Mount
200111
Set of Celere HS (25, 36, 50, 85)
imperial EF Mount
Catalog December 2016
Index Celere Lenses / 2
200220 Celere HS additional E Mount
200300
Peli case for set of Celere HS
(25, 36, 50, 85)
201030 Celere HS 36mm ft/m with PL Mount
201031
Celere HS 36mm ft/m with EF Mount
200301 Peli case for six Celere HS lenses
201032 Celere HS 36mm ft/m with E Mount
200330 LMB25 Ø85 Adapter
201040 Celere HS 50mm ft/m with PL Mount
200400 Set of ten Shims
201041
Set of Celere HS (25, 36, 50, 85)
201010
ft/m PL Mount
19
201022 Celere HS 25mm ft/m with E Mount
201011
Set of Celere HS (25, 36, 50, 85)
ft/m EF Mount
201012
Set of Celere HS (25, 36, 50, 85)
ft/m EF Mount
Celere HS 50mm ft/m with EF Mount
201042 Celere HS 50mm ft/m with E Mount
201050 Celere HS 85mm ft/m with PL Mount
201051
Celere HS 85mm ft/m with EF Mount
201052 Celere HS 85mm ft/m with E Mount
201060 Celere HS 18.5mm ft/m with PL Mount
201020 Celere HS 25mm ft/m with PL Mount
201061
201021
201062 Celere HS 18.5mm ft/m with E Mount
Celere HS 25mm ft/m with EF Mount
Celere HS 18.5mm ft/m with EF Mount
Catalog December 2016
Merchants
20
Catalog December 2016