TCK-*-250, Tilt Cable Kit
Designed for installation or portable use, The
adjustable Tilt Cable Kit is a companion to the
Zbeam, XY Grid components or is used as a
stand-alone speaker rigging kit. It provides rapid
tilt control for single loudspeakers or a group of
loudspeakers locked together. The ratcheting
action of the Clutch Lock allows for tilt
adjustments to be completed in just seconds. A
standard adjustable Tilt Cable Kit contains all the
hardware needed to connect to a Zbeam, XY Grid,
Rigging Chain Sling kits, or beam clamps down
to meet your eyebolts or other speaker rigging
points. Structural support is provided by the two
fixed length 3/16 inch galvanized wire rope
assemblies with a Working Load Limit of 420
pounds (190 kilograms) each. Indicated Working
Load Limits are for typical configurations. Special
configuration Tilt Cable Kits can be used at loads
up to 1100 pounds.
Figure 1. The Tilt Cable Kit.
* Customers report that the time to safely suspend and
accurately aim a typical three speaker system in a church or
theater can be reduced from a full day for two workers, to as
little as 45 minutes for two workers. Aiming adjustments at
system tuning time can require as little as 15 seconds per
speaker.
Figure 1. The Tilt Cable Kits Zbeam and Eyebolt
hardware and sold separately.
Polar Focus, Inc. • 20 Industrial Dr. East, Unit 2 • South Deerfield, MA 01373 USA• 413-586-4444 • 413-665-2444 fax
www.polarfocus.com • Specifications subject to change. • Copyright© 2011.
Polar Focus®, Zbeam® and XY Grid® are registered trademarks of Polar Focus, Inc.
.
Architectural Specification:
The rigging suspension and aiming device
shall have tilt control of the suspended load,
with a Tilt cable Assembly (TCA) to allow for
tilting the loudspeaker. The rigging suspension
Tck_fig1.jpg
and aiming device shall have a design factor of
10:1 with a Working Load Limit of 250 lbs. The
rigging suspension and aiming device shall be
the Polar Focus TCK-*-250, Tilt Cable Kit.
Overall Length:
Weight TCK-10-250 :
Weight TCK-14-250 :
Weight TCK-18-250 :
Weight TCK-22-250 :
Weight TCK-26-250 :
Weight TCK-30-250 :
* in inches (mm)
2.64 lbs (1.20 kg)
2.69 lbs (1.22 kg)
2.74 lbs (1.24 kg)
2.76 lbs (1.25 kg)
2.80 lbs (1.27 kg)
2.84 lbs (1.29 kg)
Primary Material: 3/16” galvanized wire rope
Secondary Material
Tilt Cable Assembly: 1/8” galvanized wire rope
WLL: 250 lbs ( 113.4 kg) with a
Design Factor: 10:1
Polar Focus, Inc. • 20 Industrial Dr. East, Unit 2 • South Deerfield, MA 01373 USA• 413-586-4444 • 413-665-2444 fax
www.polarfocus.com • Specifications subject to change. • Copyright© 2011.
Polar Focus®, Zbeam® and XY Grid® are registered trademarks of Polar Focus, Inc.