Today’s Solutions For Transmission Repair
Transmission line repair and maintenance is becoming a key economic focus for utilities in the nineties. With
new rights-of-way becoming more and more difficult to obtain, existing lines must carry heavier electrical
loads, placing added strain on older, worn or defective transmission line fittings. Add the damage caused by
improperly damped systems and vandalism, and it is easy to see why today’s utilities are looking for cost-
Uni-Grip™ Repair Splices
Uni-Grip™ Repair Dead Ends
Save time and money when replacing existing splices
Save time and money when replacing defective or
damaged dead end assemblies
●
●
●
●
●
●
●
●
●
● Replaces only the length of damaged conductor or dead-end
assembly
● Dead ends custom fabricated to the length needed to replace the
damaged section
● Restores full electrical and mechanical integrity
● Eliminates the need to resag the conductor after repair
● Line crew performs repairs from a single location
● Requires only single die for fast, easy installation
● Factory-loaded joint compound seals out air and moisture
● Capped and sealed with strippable plastic to protect high
voltage contours and electrical contact surfaces
● Tested and field-proven to assure long-term performance
Replaces only the length of damaged conductor or splice
Reduces the need to shut down system while making repairs
Splice restores full electrical and mechanical integrity
Eliminates the need to resag the conductor after repair
Work crew performs repairs from a single location
Requires only single die for fast, easy installation
Custom lengths fabricated to fit your field needs
Factory-loaded joint compound seals out air and moisture
Capped and sealed with strippable plastic to protect high
voltage contours
● Tested and field-proven to assure long-term performance
& Maintenance Problems
saving repair and maintenance techniques.
Key to those techniques are transmission line fittings that install quickly, easily and safely; that perform up
to or beyond the capability of the existing conductor; and that make sound economic sense — FARGO Transmission Line Fittings.
Repair Sleeve
Uni-Space™ Spacers
Restore damaged conductors to original electrical and
mechanical capabilities
For fast, easy replacement of damaged or defective
spacers
Fargo repair sleeves restore conductors with
up to 80 percent damage to aluminum strands.
●
●
●
●
Two-piece design slides together over damaged conductor
Custom sizes for different lengths of conductor damage
Requires only single die for fast, easy installation
Short length of repair sleeve results in less conductor preparation time than any other repair means
● Confines and retains oxide inhibitor to seal out air and moisture
● Permanently restores electrical and mechanical performance
● Tested and field-proven to assure long-term performance
● One-piece, single-lock pin design speeds installation under all
field conditions
● Elastomer bushed clamps protect conductor from future damage
● Installs quickly and easily with standard tools
● Locking action on elastomer bushings ensures permanent
positioning
● Tested to assure long-term performance