Film
Alcudia® Polyethylene Isplen® Polypropylene
Repsol
Repsol is one of the largest energy companies worldwide and one of the biggest private Oil & Gas companies. With top quality assets in
production and high potential exploration areas. A global company concerned with people’s well-being and looking to build a better future by
developing smart energy.
A global company that seeks the welfare of people and
is a step ahead in building a better future through the
development of smart energy.
© REPSOL QUIMICA, S.A. 2015. All rights reserved.
Chemicals
In its Chemical activity, Repsol manufactures a wide variety of
products, ranging from base petrochemicals to derivatives. We market
our products in more than 95 countries. Repsol’s Chemicals Division,
with a high degree of integration, focuses its strategy in the constant
generation of value through differentiated products and services. The
main objective is to obtain its customers’ trust, ensuring a measure of
sound business growth in the medium and long term.
Base petrochemicals produce ethylene, propylene, butadiene and
benzene.
Derivative chemical production includes:
/ Intermediate products: propylene oxide (PO), styrene (SM),
polyether polyols for rigid and flexible foams, CASE polyols and
propylene glycols.
/ P
olyolefins, embracing polypropylene (PP) and its compounds,
both high and low-density polyethylene (HDPE and LDPE), as well
as ethylene vinyl acetate (EVA) and ethylene butyl acrylate (EBA)
copolymer.
/ S
ynthetic rubbers, comprising hydrogenated rubbers (SEBS),
thermoplastics (SBS) and solution-based styrene-butadiene rubber
Pilot plant in Repsol Technology Centre
(SSBR).
The products from Repsol’s Chemical Division are used to
manufacture everyday articles which improve people’s quality of life,
well-being and safety.
© REPSOL QUIMICA, S.A. 2015. All rights reserved.
Repsol is committed to our
customers’ global strategy
putting our entire organization
at their disposal to achieve
a common goal: to create
long-term relationships
which enable us to rise to
the common challenges our
business presents.
© REPSOL QUIMICA, S.A. 2015. All rights reserved.
Now available to Repsol’s customers is a
comprehensive range of polyolefin grades for
film: LDPE, HDPE, mLLDPE, EVA, EBA and PP.
Repsol’s range is characterised by:
/E
xcellent optical and mechanical properties.
/E
xcellent transparency.
/G
ood processability.
/ Additives designed to meet the specific
needs of each application.
/C
ustom solutions.
© REPSOL QUIMICA, S.A. 2015. All rights reserved.
Blown film. Low density polyethylene
Grade
New
MFI
Density
Process
Additives
ISO 1133 g/10’
190ºC; 2.16
kg
ISO 1183
Kg/m3
2202F
0.25
921
Tubular
Shrink film, protection industrial film.
2303F
0.30
922
Tubular
Shrink film, protection industrial film.
2203F
0.30
922
Autoclave
Shrink film, protection industrial film.
PE033
0.30
922
Autoclave
Shrink film, protection industrial film.
PE034/A
0.30
922
Autoclave
Shrink film, protection industrial film.
2107F
0.70
921
Autoclave
Packing film, shrink film, medium duty bags.
2107FG
0.70
921
Autoclave
Packing film, shrink film, medium duty bags.
2308F
0.75
923
Tubular
Packing film,lamination, food packaging, shrink film, medium duty bags.
2308FG
0.75
923
Tubular
Packing film,lamination, food packaging, shrink film, medium duty bags.
PE015
1.00
921
Autoclave
Packing film, shrink film, medium duty bags.
2212FA
1.20
922
Autoclave
Packing film, shrink film, medium duty bags.
2212FG
1.20
922
Autoclave
Packing film, shrink film, medium duty bags.
PE003
2.00
920
Autoclave
Packing and packing, hot melt adhesive, shrink film, bubble film.
2221F
2.10
922
Autoclave
Packing and packaging, internal layer in coextrusion, shrink film.
PE046/A
2.00
920
Autoclave
Packing and packaging, shrink film.
2221FG
2.10
922
Autoclave
Packing and packaging, external layer in coextrusion, shrink film, bubble film.
2321FS
2.10
922
Autoclave
High brightness film, coextrusion, antiestatic film.
PE063/A
4.00
920
Autoclave
Thin film bags, automatic packaging, textile film.
2335FG
3.50
923
Autoclave
Thin film bags, automatic packaging, textile film.
Thermal
Stabiliser
Antiblock
Application
Slip
Antistatic
Our developments of grades for high performance shrink film succeed in
combining excellent optical properties with increased rigidity and high
processability.
The information contained herein is based on REPSOL QUIMICA’s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the
information contained herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are
transformed as well as for the final use given to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them
to whomever may have access to it. Moreover, these readers should be aware that some or all of the products might be protected by intellectual property rights.
© REPSOL QUIMICA, S.A. 2015. All rights reserved.
Blown film. High density polyethylene
Grade
MFI
Density
Process
Additives
ISO 1133 g/10’
190ºC; 2.16 kg
ISO 1183
Kg/m3
TR156G
9.00
956
Slurry
Strong film of very low thickness, carrier bags, industrial liners, paper lamination film.
TR135
12.00
938
Loop
Carrier bags, rubbish bags, waterproof sheets.
Thermal
Stabiliser
Antiblock
Application
Slip
Antistatic
High gloss film. Low density polyethylene
Grade
New
MFI
Density
Process
Gloss
ISO 1133 g/10’
190ºC; 2.16 kg
ISO 1183
Kg/m3
2805F
0.55
928
Autoclave
92
6.50
General purpose,shrink film/groups, packaging.
2810F
1.00
928
Autoclave
102
6.30
General purpose, shrink film/groups, packaging, lamination.
2810FG
1.00
928
Autoclave
97
9.00
General purpose, shrink film/groups, packaging, lamination.
3235FGA
3.50
932
Autoclave
75
7.50
Toilet tissue and kitchen paper easy-tear overwrap, high gloss coextrusion.
60º
ISO 2813
Haze
%
ASTM D-1003
Additives
Thermal
Stabiliser
Antiblock
Application
Antistatic
For the hygiene segment, there is an easy-tear
grade, with different additives.
The information contained herein is based on REPSOL QUIMICA’s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the
information contained herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are
transformed as well as for the final use given to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them
to whomever may have access to it. Moreover, these readers should be aware that some or all of the products might be protected by intellectual property rights.
© REPSOL QUIMICA, S.A. 2015. All rights reserved.
Blown film. Repsol PE UltraClean
Grade
New
MFI
Density
Process
Additives
ISO 1133 g/10’
190ºC; 2.16 kg
ISO 1183
Kg/m3
008
0.75
923
Tubular
Film with very low gel level, surface protection film, lamination film.
020
2.00
920
Autoclave
Film with very low gel level, surface protection film, lamination film.
021
2.00
920
Autoclave
Film with very low gel level, surface protection film, lamination film.
Antiblock
New differentiated grades
Application
Slip
Our linear metallocene catalysed polyethylene
film combines excellent processability with
outstanding optical properties, transparency
and gloss, and mechanical properties such
as stretchability, weldability and puncture
resistance.
High performance film. Metallocene polyethylene
Grade
MF1810
MFI
Density
ISO 1133 g/10’
190ºC; 2.16 kg
ISO 1183
Kg/m3
1.00
918
Process
Loop
Gloss
Haze
60º
ASTM D-2457
%
ASTM D-1003
130
5.00
Additives
Antiblock
Application
Slip
Excellent mechanical and optical properties, seal layer in coextrusions, heavy duty
packaging, stretch hood.
New
MF1810AC
1.00
918
Loop
103
9.00
Excellent mechanical and optical properties, seal layer in coextrusions, heavy duty
packaging, stretch hood.
The information contained herein is based on REPSOL QUIMICA’s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the
information contained herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are
transformed as well as for the final use given to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them
to whomever may have access to it. Moreover, these readers should be aware that some or all of the products might be protected by intellectual property rights.
© REPSOL QUIMICA, S.A. 2015. All rights reserved.
Extrusion coating high MFI. Low density polyethylene
Grade
New
New
MFI
Density
Process
Application
ISO 1133 g/10’
190ºC; 2.16 kg
ISO 1183
Kg/m3
PE041
4.00
920
Autoclave
Extrusion coating, coextruded thin film, cast film.
PE071
8,00
919
Autoclave
Extrusion coating.
1970C
7,50
922
Autoclave
Extrusion coating.
PE019
20.00
919
Autoclave
Masterbatches, extrusion coating.
2322M
22.00
923
Autoclave
Masterbatches, extrusion coating.
PE022
70.00
915
Autoclave
Masterbatches, hot sealing adhesive, caps and closures, wax blends.
17070M
70.00
917
Autoclave
Masterbatches, hot sealing adhesive, caps and closures, wax blends.
17150M
150.00
916
Autoclave
Masterbatches, hot sealing adhesive, caps and closures, wax blends.
PE023
150.00
916
Autoclave
Masterbatches, hot sealing adhesive, caps and closures, wax blends.
We also have grades optimised for the most
modern extrusion coating systems.
The information contained herein is based on REPSOL QUIMICA’s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the
information contained herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are
transformed as well as for the final use given to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them
to whomever may have access to it. Moreover, these readers should be aware that some or all of the products might be protected by intellectual property rights.
© REPSOL QUIMICA, S.A. 2015. All rights reserved.
Extrusion. EVA/EBA Copolymer
Grade
New
New
MFI
Comonomer*
Process
Application
ISO 1133 g/10’
190ºC; 2.16 kg
%
PA537
0.70
18 AV
Autoclave
Stretch agricultural and industrial film, stretch hood.
PA539
2.00
18 AV
Autoclave
Stretch agricultural and industrial film, stretch hood, coextrusion, thermofusible bags.
PA430C
3.50
24 AV
Autoclave
Extrusion coating, coextrusion, thermo adhesive film, thermofusible bags.
PA439C
3.00
27 AV
Autoclave
Extrusion coating, coextrusion, thermo adhesive film, thermofusible bags.
PA303
0.30
3 AB
Autoclave
Stretch hood, agricultural film.
PA803
0.30
8 AB
Autoclave
Stretch hood, agricultural film.
PA1303
0.40
13 AB
Autoclave
Stretch hood, agricultural film.
PA1704
0.40
17 AB
Autoclave
Stretch agricultural and industrial film, stretch hood.
PA1715
1.50
17 AB
Autoclave
Stretch agricultural and industrial film, stretch hood.
PA1770
7,00
17 AB
Autoclave
Extrusion coating, coextrusion.
PA420L
20.00
20 AV
Autoclave
Extrusion coating, coextrusion.
* AV: Vinyl acetate, AB: Butyl acrylate
Repsol offers a wide range of EVA/EBA copolymers indicated for
producing film and stretch sleeves, agricultural film and extrusion
coating.
The information contained herein is based on REPSOL QUIMICA’s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the
information contained herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are
transformed as well as for the final use given to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them
to whomever may have access to it. Moreover, these readers should be aware that some or all of the products might be protected by intellectual property rights.
© REPSOL QUIMICA, S.A. 2015. All rights reserved.
Extrusion. Polypropylene
Grade
New
New
New
Type
MFI
Flexural modulus
of elasticity
Tensile strength at
yield
ISO 1133 g/10’
230ºC; 2.16 kg
ISO 178
MPa
ISO 527
MPa
Izod impact strength
notched
Additives
Antiblock
Slip
Application
Antistatic
PP034W3F
PPH
2.20
1 300
35
5,00
Bioriented or metallised film.
PP044W3F
PPH
3.00
1 300
36
4.50
Bioriented or metallised film.
PP064S1F
PPH
9.00
1 500
35
3.00
Cast film.
PP064W1F
PPH
9.00
1 500
35
3.00
General purpose, cast film, metallised film.
PB120G1F
PPC
0.95
1 100
21
40.00
Tapes, blown film, lamination and co-extrusion.
PB130G1F
PPC
1.30
1 100
27
30.00
General purpose, cast or blown film with low temperatures requirement.
PB150G1F
PPC
7.00
1 150
27
9.00
General purpose, cast film with low temperatures requirement.
PB154M1F
PPC
7.00
1 100
27
15.00
Food packaging film with excellent impact resistance at low temperaute,
retortable, sterilisable.
PB170G1F
PPC
11.00
1 150
27
9.00
General purpose, cast film with low temperatures requirement.
PR255W1F
PPR
8.00
700
9.00
Cast film of high transparency, multilayer film and stretch film.
PR264G1F
PPR
9.00
950
25
8.00
Cast film, foamed.
PR264M1F
PPR
9.00
950
25
8.00
Cast film.
PR264S1F
PPR
9.00
950
25
8.00
Cast film.
PX452AF
PPR
5.00
Matt film: excellent film quality, transparency, low level of gloss and
high haze.
New
PX262CF
PPR
9.50
500
Peel film, food packaging film, lamination film and coextrusion.
PPH: Homopolymers, PPC: Heterophasic copolymers, PPR: Random copolymers
Wide range of PP for cast film and BOPP to comply with
the requirements for each application: rigidity, cold impact
resistance, stretchability and low sealing temperature. Peelable
grades, matt grades for coextrusion
and ultraclean grades
The information contained herein is based on REPSOL QUIMICA’s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the
information contained herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are
transformed as well as for the final use given to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them
to whomever may have access to it. Moreover, these readers should be aware that some or all of the products might be protected by intellectual property rights.
© REPSOL QUIMICA, S.A. 2015. All rights reserved.
Technical service and development
Repsol’s capacity for innovation and appropriate resources, including its
Technology Centre, are at its clients’ disposal in the interests of continued
improvement and development of its products. We optimise products and
their performance at our clients’ sites, in accordance with current standards
and the requirements of the application, thus offering solutions, supporting
development. These are competitive advantages for both parties.
Quality, safety and environment
All petrochemical plants and part-owned subsidiaries run by Repsol Química
are compliant with the current ISO 9001:2008 standards, for the quality of
processes from manufacture to distribution, transport management and end
product warehousing. Petrochemical complexes, packaging facilities and
logistics centres all have OHSAS 18001.2009 (Occupational Health and Safety
Assessment Series) certification for their rigorous safety measures. They
also have ISO 14001 certification for their environmental management and
the reduction of the impact of their facilities; and ISO 14064 for the annual
verification of greenhouse gas emissions.
A comprehensive range of LDPE, HDPE, EVA, EBA,
mLLDPE and PP characterized by their excellent
mechanical and optical properties.
July 2015
The information contained herein is based on REPSOL QUIMICA’s current knowledge and experience and is presented in good faith for guidance only. Although REPSOL QUIMICA declares to have been most diligent when including the information contained
herein, taking into account that several and different factors may affect the processing, application or use of the products, the convertor shall be responsible in every case for the conditions under which the products are transformed as well as for the final use given
to them. REPSOL QUIMICA warns that this information may undergo variations or improvements; therefore REPSOL QUIMICA is not obliged to reflect these in this document or to communicate them to whomever may have access to it. Moreover, these readers
should be aware that some or all of the products might be protected by intellectual property rights.
© REPSOL QUIMICA, S.A. 2015. All rights reserved.
Offices & Customer Care
SPAIN
GERMANY
Customer Care
Customer Care
Tel.: + 34 900 10 32 39
Tel.: + 800 60 504 444
Tel.: + 34 91 753 18 01
Tel.: +34 91 753 18 00
[email protected]
[email protected]
PORTUGAL
UNITED KINGDOM
Customer Care
Customer Care
Tel.: + 800 60 501 111
Tel.: + 800 60 502 222
Tel.: +34 91 753 18 05
Tel.: +34 91 753 18 03
[email protected]
[email protected]
FRANCE
REST OF THE WORLD
Customer Care
English Customer Care
Tel.: + 800 60 503 333
Tel.: +34 91 753 18 06
Tel.: +34 91 753 18 02
French Customer Care
[email protected]
Tel.: +34 91 753 18 07
ITALY
Caldera Business Park
Palazzo D- Ala 1- 3º Piano
Via Caldera 21
20153 Milano
Customer Care
Tel.: + 800 60 509 999
Tel.: +34 91 753 18 04
[email protected]
[email protected]
Corporate Headquarters
Méndez Álvaro, 44
28045 Madrid (Spain)
Tel.: +34 91 753 81 00
www.chemicals.repsol.com
Technical Service & Development
Repsol Technology Centre
Ctra. de Extremadura A5, km 18
28931 Móstoles (Madrid)
Tel.: +34 91 753 86 00
[email protected]