SPARE PARTS LIST
POS.
ORDER NO.
DESCRIPTION
Spare parts drawing hammer mills DM-3, BM-3 and CM-3
August 2009/PR/AB
9
SPARE PARTS LIST
POS.
ORDER NO.
DESCRIPTION
HAMMER MILLS TYPE DM-3, CM-3 AND BM-3
3
7
8
9
10
12
13
14
18
21
22
24
221069
221081
221144
220017
220015
220143
220144
221065
221066
221064
221063
6004005
6205061
221072
220009
220160
220008
220161
220007
220196
220131
220197
220006
220195
221158
6000454
6001172
221121
221003
221143
221124
223021
221139
221157
183004
211005
6302006
221164
6000446
6001171
224007
226147
6000716
6000724
6001173
221071
Mill housing for reinforcement
Mill housing without reinforcement
PROF-LINE mill housing for reinforcement
4-winged fan
8-winged fan
PROF-LINE 4-winged fan
PROF-LINE 8-winged fan
Fan with loose wings, 4-winged
Fan with loose wings, 8-winged
4 loose wings
8 loose wings
Screw for loose wings (8-16)
Split for loose wings (8-16)
Grinding chamber
Screen 3.0 mm, T=2 mm
Screen 3.0 mm, T=3 mm
Screen 3.5 mm, T=2 mm
Screen 3.5 mm, T=3 mm
Screen 4.0 mm, T=2 mm
Screen 4.0 mm, T=4 mm
Screen 4.5 mm, T=2 mm
Screen 4.5 mm, T=4 mm
Screen 5.0 mm, T=2 mm
Screen 5.0 mm, T=5 mm
Grinding bridge with screws
Set screw M10x16 (12)
Spring washer M10 (12)
Rotor complete DM-3
Rotor complete BM-3 / CM-3
PROF-LINE rotor complete
Hammer set complete with hammer bolts etc.
Set hammers
PROF-LINE hammer set complete with
hammer bolts etc.
Set hammer bolts with screws
Distance ring (12)
Mill cover
Handwheel for mill cover (4)
PROF-LINE mill cover
Set screw M8x16 (4)
Spring washer 8 mm (4)
Tension washer BM-3/CM-3
Tension washer DM-3
Bolt for motor shaft M16x50 CM-3
Bolt for motor shaft M16x60 DM-3
Spring washer 16 mm
Reinforcement liner for mill
August 2009/PR/AB
7
SPARE PARTS LIST
POS.
ORDER NO.
25
26
27
221005
221137
221138
221074
221161
6000920
6001171
6000445
6001171
143011
211152
211153
211154
7004504
224019
6004010
6001173
6000923
220036
DESCRIPTION
housing 221069 and 221081
Reinforcement liner for old mill housing 221000
PROF-LINE reinforcement liner, upper, with bolts
PROF-LINE reinforcement liner, lower, with bolts
Wearing plate CM-3/DM-3
Wearing plate DM-3 PROF-LINE
Nut M8 (8) CM-3/DM-3
Spring washer M8 (8) CM-3/DM-3
Set screw M8x12 (4)
Spring washer M8 (4)
Parallel key for rotor and fan
Reinforcement
Tightening for grinding chamber
Tightening for cover
Tightening 4x8 mm between stand and housing, per m
Set of distance rings for mounting between rotor and
fan (2 x 2 mm + 1 x 1 mm)
Bolt for mounting of motor (4)
Washer for above (4)
Nut for above (4)
Bypass suction 80 mm
August 2009/PR/AB
8