Wall Cabinet Stacked 42” Tall 12” Deep
Framed & Frameless
Wall Cabinet Stacked 48” Tall 12” Deep
Framed & Frameless
12
12
12
9
48
42
Cabinet
List Price
WCS942(1)
684
WCS1242(1)
727
WCS1542(1)
770
WCS1842(1)
813
WCS2142(1)
858
(1) Single hung specify left
or right hinge.
List Price
WCS948(1)
737
(2) 2 door Butt doors
WCS1248(1)
786
(2) 2 door Butt doors
(3) 2 door w/mullion.
(frameless will have partition instead of mullion)
WCS1548(1)
835
WCS1848(1)
884
(3) 2 door w/mullion.
(frameless will have partition
instead of mullion)
WCS2148(1)
936
WCS2448(1)
985
* - not available in Frameless
WCS2442(1)
901
WCS2742(2)
1022
WCS2748(2)
1116
WCS3042(2)
1057
WCS3048(2)
1156
WCS3342(2)
1109
WCS3348(2)
1215
WCS3642(2)
1144
WCS3648(2)
1255
WCS3942(3)
1208
WCS3948(3)
1328
WCS4242(3)
1244
WCS4248(3)
1370
WCS4542(3)*
1295
WCS4548(3)*
1428
WCS4842(3)*
1330
WCS4848(3)*
1468
Bridgewood Custom Cabinetry
(1) Single hung specify left or
right hinge.
Cabinet
W59
* - not available in Frameless
Revised 04/04/2014
Wall Cabinet Stacked 54” Tall 12” Deep
Framed & Frameless
Wall Cabinet Stacked 60” Tall 12” Deep
Framed & Frameless
12
12
15
18
54
60
Cabinet
List Price
WCS954(1)
790
WCS1254(1)
845
WCS1554(1)
900
WCS1854(1)
955
WCS2154(1)
1013
(1) Single hung specify left
or right hinge.
List Price
WCS960(1)
842
(2) 2 door Butt doors
WCS1260(1)
904
(2) 2 door Butt doors
(3) 2 door w/mullion.
(frameless will have partition instead of mullion)
WCS1560(1)
965
WCS1860(1)
1026
(3) 2 door w/mullion.
(frameless will have partition
instead of mullion)
WCS2160(1)
1091
WCS2460(1)
1152
* - not available in Frameless
WCS2454(1)
1069
WCS2754(2)
1209
WCS2760(2)
1303
WCS3054(2)
1254
WCS3060(2)
1353
WCS3354(2)
1321
WCS3360(2)
1427
WCS3654(2)
1366
WCS3660(2)
1477
WCS3954(3)
1448
WCS3960(3)
1568
WCS4254(3)
1495
WCS4260(3)
1620
WCS4554(3)*
1560
WCS4560(3)*
1693
WCS4854(3)*
1605
WCS4860(3)*
1743
Bridgewood Custom Cabinetry
(1) Single hung specify left or
right hinge.
Cabinet
W60
* - not available in Frameless
Revised 04/04/14
Wall Cabinets
Angled fluted columns (WOOD ORDER ONLY)
List cost
WAFC1512
501
Flutes will stop 4” from top WAFC1515
and bottom
WAFC1518
518
WAFC1521
533
WAFC1524
538
WAFC1527
545
WAFC1530
550
WAFC1533
561
WAFC1536
572
WAFC1539
579
WAFC1542
585
WAFC1545
619
WAFC1548
653
WAFC1554
685
WAFC1560
720
Acc.
List cost
WASC1512
501
WASC1515
518
WASC1518
528
WASC1521
533
WASC1524
538
WASC1527
545
WASC1530
550
WASC1533
561
WASC1536
572
WASC1539
579
WASC1542
585
WASC1545
619
WASC1548
653
WASC1554
685
WASC1560
720
9 12
12 15
3
3
4
Acc.
Specify left or right
2 7/8
2 7/8
41 4
4
41 4
12" Deep column specify
(WFC12--)N/C
30
30
Left shown
Short side finished — 1/2” end
panel with 1/4” BB1 applied.
4
Long side may be finished by
request. Standard finished end
charge applies.
4
528
Angled smooth columns (WOOD ORDER ONLY)
2 7/8
2 7/8
Specify left or right
9 12
12 15
3
3
41 4
41 4
30
12" Deep column specify
(WSC12--)N/C
Left shown
Short side finished — 1/2” end
panel with 1/4” BB1 applied.
30
Long side may be finished by
request. Standard finished end
charge applies.
2 7/8
1/4
12
15
1/16
1/16
4 1/4
Bridgewood Custom Cabinetry
W61
3
Revised 03/16/2012
Wall Cabinets accessories
27
12
1/4
Finished end
End panel
Wall finished end - FRAMED AND FRAMELESS
List cost
WFE
34 ea.
Specify left or right
1/2
3/4
1/16
Face Frame
Reveal past
face frame
21
Acc.
Finished ends are
made with plywood
that has an MDF core
for framed cabinets.
For frameless a matching material will be
applied to side of cabinet
27
12
1/4
Finished end
End panel
Wall beaded finished end - FRAMED AND FRAMELESS (WOOD ORDERS ONLY)
Acc.
List cost
WBFE
52 ea.
Specify left or right
1/2
3/4
Beads are cut into plywood exposing inner
core. As shown below.
1/16
Reveal past
face frame
21
Face Frame
WR—Wine Rack
Example: Wall peninsula cabinet. Removed shelves and
installed wine rack. The lattice is flush to the back.
12
Acc.
List cost
WR
176
Wine rack lattice may be added to any opening that is within the following parameters.
Minimum height is 9”.
Minimum width 9”.
Maximum height 31”.
Maximum width 31”.
Maximum depth 15”
The charge of $176 is for the lattice material only.
If stained interior is needed, use Mod31, priced separately.
If partition is needed, use Mod28. Please specify location of partition. Priced separately.
Specify if lattice is to be flush to the front or back of cabinet.
Bridgewood Custom Cabinetry
W62
Revised 10/04/2010
Wall Cabinets accessories
12
RPEW
243 4
RPEW increases
width of cabinet
by
End panel
Wall raised end panel - FRAMED
1/2
3 .
4"
Face Frame
24"
List cost
RPEW
243 ea
Has 5/16" radius on
front edge (MOD 11R)
N/C (Except “F” Profile)
3/4
3/4
Acc.
Specify Right/Left
installation, installed at
factory.
24 3/4"
Wall raised end panel - FRAMELESS
24
3
12
4
RPEW
End Panel
243 4
RPEW
243 ea
4
RPEW increases
21
List cost
Specify Right/Left installation,
installed at factory.
3
3
width of cabinet by "
4
Acc.
DOOR
24
24 3/4
Standard installation placed
RPE flush to face of cabinet
as illustrated in picture to the
left.
You may request that the
RPE be installed flush to face
of door as illustrated in the
picture at lower left. N/C
24
3
4
DOOR
243 4
End Panel
RPEW
RPEW Flush to
face of door
21
Bridgewood Custom Cabinetry
W63
Revised 07/08/2008
Wall Cabinets accessories
Chrome stemware racks - FRAMED AND FRAMELESS (Subject to availability)
&
16”
11”
18”
4”
Width 4”
Acc.
List cost
Depth 11”, 16” & 18”
SWC11
23
SWC16
25
SWC18
26
Acc.
List cost
Single
SBRLC
25
Double
DBRC
32
Height 1”
Inner dimension for stemware: 3-1/2”
Mounts underneath cabinet
Shipped loose
Chrome bottle racks - FRAMED AND FRAMELESS (Subject to availability)
d
oo
w ux
a
Br i
dg
Bo r
e
de
Br i
dg
Bo r
e
de
d
oo x
w
u
a
Br i
dg
Bo r
e
de
oo
w u
a
Single: Width 4”, Depth 6-1/2”,
Height 4-1/2”
Double: Width 4”, Depth 6-1/2”,
Height 9”
Shipped loose
Depth refers to recommended spacing between individual
brackets. Bottle lengths vary.
Chrome combination stemware / bottle rack - FRAMED AND FRAMELESS (Subject to availability)
Width 4”
Acc.
List cost
SWBRC
40
Depth 11”
Height 11-1/2”
Inner dimension for stemware: 3-1/2”
Mounts under cabinet
Shipped loose
Bridgewood Custom Cabinetry
W64
Revised 10/04/2010
Wall Cabinets accessories
Shelf wine rack
Specify left or right
Adjustable. Limited to 1” increments on spacing
Acc.
List cost
SWR-A
265 ea
SWR-F
265 ea +
176 per
cabinet
Minimum width cabinet is 9”
Maximum width cabinet is 36”
To change to non-adjustable (fixed) shelves add
176.00 to price of cabinet.
If cabinet is modified over 12” deep, rack will be
flushed to front of shelf. If this is not what is desired then a CQC must be generated.
2"
3/8"
3/4"
5"
R 1-1/2"
3 "
2" 4
1-1/2"
g
Br
id
Bo
r
Back support
set 2 inches
from back of
cabinet
ew
d
ood
x
a u
e
3 "
8
2
Front support
set 2 inches
from inside
front of cabinet
11 2"
3 "
4
R 1 1"
1/2 11 "
2
1 "
4
5
R 8"
1" 1/4"
3/4"
5" R 5/8"
1-1/2"
Stemware Rack
SW
Priced by linear foot ONLY, up to next
whole foot.
75 / FT
NOTE: The Stemware rack CAN NOT be
ordered separately. It will be installed on
the specified cabinet.
Bridgewood Custom Cabinetry
W65
Revised 11/10/2011
Wall Cabinets accessories
Fluted radius corner raised panel - FRAMED ONLY NOT AVAILABLE ON FRAMELESS
Specify left or right
29
27
12
Price does not fluctuate on cabinet depth change
up to 15” deep. For depths greater than 15” refer to
the E-catalog program.
Acc.
List cost
RCRPW
338
Factory installed
36
Smooth radius corner raised panel - FRAMED ONLY NOT AVAILABLE ON FRAMELESS
Specify left or right
29
27
12
Acc.
Price does not fluctuate on cabinet depth change
SRCRPW
up to 15” deep. For depths greater than 15” refer to
the E-catalog program.
List cost
439
Factory installed
36
Bridgewood Custom Cabinetry
W66
Revised 07/08/2008
Wall Cabinets accessories
Fluted radius corner veneer panel - FRAMED ONLY NOT AVAILABLE ON FRAMELESS
29
27
12
11 2
Acc.
List cost
RCVPW
338
Specify left or right
Factory installed
Solid
Plywood
There is a slight chamfer
where side panel meets
radius corner. This chamfer exposes the plywood
core. When stained the
chamfer will be darker.
Smooth radius corner veneer panel - FRAMED ONLY NOT AVAILABLE ON FRAMELESS
29
27
12
11 2
Acc.
List cost
SRCVPW
439
Specify left or right
Factory installed
Solid
Plywood
36
Our radius corners may be ordered with double radius. The picture at
the top displays the double radius applied left and right. Radius corner
can be made deeper than the cabinet and a bar back can then be applied to complete the assembly giving you a furniture appearance.
Standard return on the back of our extended radius corners is 1”. If you
need more, please specify.
1
1
27
31
There are 2 methods to apply crown molding to wall cabinets with radius
corners.
2.
25
1 31 2
The picture at right bottom shows a single double radius corner attached
to a peninsula cabinet that is the same depth as the cabinet. Radius
corners must clear the back of the cabinet by at least 1” unless there is a
face frame to attach to.
1.
There is a slight chamfer
where side panel meets
radius corner. This chamfer exposes the plywood
core. When stained the
chamfer will be darker.
If medium crown is being used you may order our RCC’s, Radius
corner caps ( see picture next page). This gives you a transitional
piece from side to front.
You may order our wall and tall radius corners with a 2” X 2”
square block applied at the top to give you a true 90 degree corner
to transition “around” the corner ( see picture next page).
12
27
29
Bridgewood Custom Cabinetry
W67
Revised 07/08/2008
Wall Cabinets accessories
Picture at right shows Bar Back installed.
Field installed
131 2
27
31
Square Radius Corner - FRAMED ONLY NOT AVAILABLE ON FRAMELESS
Top radius block is dropped down 3/4” to accept a 2” X 2” square block, allowing the use of
mitered crown molding.
Acc.
List cost
SQRC
41
Please specify when ordering . SQRC is applied at factory.
Radius Corner Cap - FRAMED ONLY NOT AVAILABLE ON FRAMELESS (Subject to availability)
Can only be used in conjunction with medium
crown molding.
Acc.
List cost
RCC
199
Radius Corner Cap is end grain wood and will
always stain 1 to 2 shades darker than the rest
of your order.
Bridgewood Custom Cabinetry
W68
Revised 10/04/2010
Wall Cabinets accessories
Hutch ends (shipped loose) - FRAMED AND FRAMELESS (WOOD ORDERS ONLY)
12
Acc.
List cost
Acc.
List cost
HE48
311
HEADD
227
HE54
331
HE60
365
12
30/36/42
48/54/60
Hutch ends add 3/4” to the
width of the
HEADD Shipped loose
Installed in field
cabinet.
18
HEADD installs to the
bottom of cabinet
Shipped loose
18
18
Installed in field
Hutch ends (factory installed) - FRAMED AND FRAMELESS (WOOD ORDERS ONLY)
401 2
3
Hutch ends add 3/4” to the width
of the cabinet.
4
39
3
Acc.
List cost
HEINS48
396
Factory installed
HEINS54
416
Specify left, right or both
HEINS60
450
4
Picture at left shows HEINS
installed on the left and the right
Picture at right for illustration only.
Shows the HEINS and HEADD installed
on cabinet.
H E IN S 4 8
HEINS was installed at the factory while
the HEADD was installed at the time the
cabinet was installed in the field.
Bridgewood Custom Cabinetry
HEADD
W69
Revised 07/08/2008
Wall Cabinets accessories
Wall cabinet with door mounted pull out spice rack 30” Tall - FRAMED AND FRAMELESS
9
Cabinet
List cost
WWSR930
580
WWSR1230
793
FRAMED
9
12
Size modifications are not allowed on the spice pullout cabinets.
Wooden pull-outs with chrome rails feature “tri-slides” for
complete stability and easy installation.
30
30
Full extension is standard.
Door mounted only.
(Subject to availability)
FRAMELESS
Wall cabinet with door mounted pull out spice rack 36” Tall - FRAMED AND FRAMELESS
9
Cabinet
List cost
WWSR936
670
WWSR1236
890
FRAMED
9
12
Size modifications are not allowed on the spice pullout
cabinets.
Wooden pull-outs with chrome rails feature “tri-slides” for
complete stability and easy installation.
36
36
Full extension is standard.
Door mounted only.
Spice rack is 30” tall. See picture at left
(Subject to availability)
FRAMELESS
Wall cabinet with door mounted pull out spice rack 42” Tall - FRAMED AND FRAMELESS
9
Cabinet
List cost
WWSR942
684
WWSR1242
908
FRAMED
12
9
Size modifications are not allowed on the spice pullout cabinets.
Wooden pull-outs with chrome rails feature “tri-slides” for
complete stability and easy installation.
42
42
Full extension is standard.
Door mounted only.
Spice rack is 30” tall. See picture at left
(Subject to availability)
FRAMELESS
Bridgewood Custom Cabinetry
W70
Revised 02/16/2012
Wall Cabinets accessories
Wall filler spice rack 30” Tall - FRAMED AND FRAMELESS (Subject to availability)
Cabinet
List cost
WFSR330
777
Cabinet
List cost
WFSR630
817
WFSR’s are designed to be installed between the stiles of the
adjoining cabinets to resemble a filler piece between 2 cabinets. Cabinet comes with no end panels. It is open on the left
and right. Cabinet cannot be modified in width, height or
depth. To see cabinets installed go to page W68, W69 &
W70. Spice rack comes with full extension ball bearing
guides. Some form of handle, not supplied, will need to be
applied to pullout spice rack. Cabinet is a true 3” or 6” width.
30
Filler included with unit
Wall filler spice rack 36” Tall - FRAMED AND FRAMELESS (Subject to availability)
Cabinet
List cost
WFSR336
793
Cabinet
List cost
WFSR636
843
WFSR’s are designed to be installed between the stiles of the
adjoining cabinets to resemble a filler piece between 2 cabinets. Cabinet comes with no end panels. It is open on the left
and right. Cabinet cannot be modified in width, height or
depth. To see cabinets installed go to page W68, W69 &
W70. Spice rack comes with full extension ball bearing
guides. Some form of handle, not supplied, will need to be
applied to pullout spice rack. Cabinet is a true 3” or 6” width.
36
Filler included with unit
Wall filler spice rack 42” Tall - FRAMED AND FRAMELESS (Subject to availability)
Cabinet
List cost
WFSR342
813
Cabinet
List cost
WFSR642
867
WFSR’s are designed to be installed between the stiles of the
adjoining cabinets to resemble a filler piece between 2 cabinets. Cabinet comes with no end panels. It is open on the left
and right. Cabinet cannot be modified in width, height or
depth. To see cabinets installed go to page W68, W69 &
W70. Spice rack comes with full extension ball bearing
guides. Some form of handle, not supplied, will need to be
applied to pullout spice rack. Cabinet is a true 3” or 6” width.
42
Filler included with unit
Bridgewood Custom Cabinetry
W71
Revised 10/04/2010
Wall Cabinets accessories
6
Framed cabinet installation
3/8"
3/8"
SCREW HERE
SCREW HERE
SCREW HERE
SCREW HERE
SCREW HERE
SCREW HERE
FILLER
.59"
.59"
3/8"
3/8"
6
HE
RE
DOOR
SCREW HERE
W
FACEFRAME
CABINET END PANEL
RE
CABINET END PANEL
SC
WFSR6 installed
between 2
cabinets
w/attached filler
spaced out flush
with adjoining
doors/drawers.
FACEFRAME
FILLER
DOOR
6
RUBBER
BUMPERS
Bridgewood Custom Cabinetry
3/8" Spacers
Provided
W72
RUBBER
BUMPERS
Revised 07/08/2008
Wall Cabinets accessories
6
Framed cabinet installation
3/8"
3/8"
SCREW HERE
SCREW HERE
SCREW HERE
SCREW HERE
SCREW HERE
SCREW HERE
FILLER
.59"
3/8"
Bridgewood Custom Cabinetry
WFSR6 installed
between 2
cabinets
w/attached filler
flush to adjoining
face frames for a
true filler
appearance.
FILLER
5-7/8"
3/8" Spacers
Provided
W73
3/8"
SCREW HERE
RUBBER
BUMPERS
6
CABINET END PANEL
RE
HE
DRAWER FRONT
CABINET END PANEL
W
RE
SC
FACEFRAME
.59"
FACEFRAME
DOOR
RUBBER
BUMPERS
Revised 07/08/2008
Wall Cabinets accessories
FRAMELESS CABINET INSTALLATION.
6
SCREW HERE
SCREW HERE
Stretcher
Stretcher
23
SCREW HERE
SCREW HERE
Stretcher
Stretcher
SCREW HERE
SCREW HERE
BFSR does not come with attached appliqué as
shown, ordered separately.
FILLER
.59"
For Flush toe
applications add
mod 10.
.59"
6
3/8" Spacers
Provided
W74
SCREW HERE
Bridgewood Custom Cabinetry
FILLER
5-7/8"
CABINET END PANEL
RE
HE
RUBBER
BUMPERS
CABINET END PANEL
W
RE
SC
DRAWER FRONT
WFSR6 installed
between 2
cabinets
w/attached filler
spaced out flush
with adjoining
doors/drawers.
DOOR
RUBBER
BUMPERS
Revised 07/08/2008
Wall Cabinets accessories
Wall wine cube 30”Tall - FRAMED AND FRAMELESS
6
CO
SO NS
LI TR
D
U
W CT
O
O ED
D
W
12
IT
H
The sides and shelves are made from ¾” thick material with a
¼” plywood back. Shelves are evenly spaced. Standard cabinets cannot be modified. If a different size is needed cabinet
must be quoted. All exposed parts are finished with the exception of the back.
Cabinet
List cost
WWC30
442
Cabinet
List cost
WWC36
489
Cabinet
List cost
WWC42
538
30
Equal openings
Wall wine cube 36”Tall - FRAMED AND FRAMELESS
6
C
SO ON
LI STR
D
U
C
W
O TE
O
D D W
12
IT
H
The sides and shelves are made from ¾” thick material with a
¼” plywood back. Shelves are evenly spaced. Standard cabinets cannot be modified. If a different size is needed cabinet
must be quoted. All exposed parts are finished with the exception of the back.
36
Equal openings
Wall wine cube 42”Tall - FRAMED AND FRAMELESS
6
C
O
SO NS
TR
LI
D
UC
W
T
O
O ED
D
W
12
IT
H
The sides and shelves are made from ¾” thick material with a
¼” plywood back. Shelves are evenly spaced. Standard cabinets cannot be modified. If a different size is needed cabinet
must be quoted. All exposed parts are finished with the exception of the back.
42
Equal openings
Bridgewood Custom Cabinetry
W75
Revised 07/08/2008
Wall Cabinets accessories
Wall pull down shelf system 24”Tall - FRAMED AND FRAMELESS
36
Cabinet
List cost
W1PDSS2424
842
W1PDSS3624
972
24
(Subject to availability)
Wall pull down shelf system 36”Tall - FRAMED AND FRAMELESS
36
Cabinet
List cost
W1PDSS2436
1009
W1PDSS3636
1186
36
(Subject to availability)
Wall pull down shelf system 42”Tall - FRAMED AND FRAMELESS
36
Cabinet
List cost
W2PDSS2442
1557
W2PDSS3642
1774
42
(Subject to availability)
Bridgewood Custom Cabinetry
W76
Revised 10/04/2010