Measuring tools
www.uniortools.com
Measuring tools
Today’s experienced skilled workers can trust
Unior’s measuring tools more than they can
trust themselves.
Gone are the times when one had to think of
whether the screw is tightened enough or not.
With Unior's measuring tools, the screws are
tightened just as prescribed, their handling
requires less physical force, and work becomes
easier and more effective.
Since there aren't any universal measuring tools
on the market, Unior offers a range of various
implementations which are adjusted to
perform a certain function – from changing of
wheels to mounting of steel constructions in
the building industry.
Visoka
h
quality
ka
kovos
nt
ar
s o f Guara
ee
Hig
nt
ar
e
2y
e
2y
ee
Hig
h
quality
s o f Guara
t
cij
e
Unior’s systems for quality control
are in accordance with ISO 9001
2l
and ISO 14001 standards.
eti garan
Legend of symbols used
in catalogue
code
weight in grams
torque in Nm
torque in lbf.ft
hexagon profile internal 4-point socket
gear rate
m
Due to constant
protection, each
torque wrench is
being delivered in an
appropriate protection
box – case or in other
solid packaging.
meters
ft
feet
ø
diameter
Contact information
UNIOR d.d.
Kovaška cesta 10, 3214 ZREČE, Slovenia
T: +386 3 757 81 00
F: +386 3 576 26 43
I: www.uniortools.com
E: [email protected]
Photographs in this catalogue are symbolic.
3
Torque multiplier
For hard-to-handle screws
The torque multiplier can handle the most difficult screws. With the help of a portable
mechanism through a system of gears it increases the effect of the torque force which is
applied when fastening or unfastening a nut or a screw for a few times. Said differently –
during screwing you will need up to five times less energy. The torque multiplier has the
capability to increase the body force for a few times. This can be observed especially on
construction machinery, trucks, heavy mechanization, steel constructions, and everywhere
the screws melted with the surface due to various agents.
280
Torque multiplier
Advantages
• Exactly defined multiplication – no
Lever support handle
The compact and entirely
durable construction is
insensible to atmospheric and
other environmental agents.
•
•
•
•
Important!
• We shall never exceed the
Proper use
•
requested torque starting point of
the multiplier.
Recommended use of IMPACT
socket wrenches.
need of tabular conversions
Simple use does not require any
additional knowledge
Exactly definable torque starting
point (possible margin up to +/- 4%)
Additional handle offers a wide
range of use
Robust construction requires
minimal maintenance and assures
longer useful life of the product
Use
• Building construction
• Heavy industry
• Shipbuilding
• Aeronautical industry
• Train compositions
• Refineries
• 5:1 torque multiplier, better accuracy
•
•
•
from +/- 4%
Comes with handle
Robust construction needs minimum
maintenance and assures longer useful
life of the product
Comes in protection box, perfect for
truck tool sets
During use, the portable mechanism
rotates in the opposite direction
of the socket wrench therefore the
handle needs to be applied.
4
D
A
C
H
616804
1300
960
5:1
1/2" (32 mm)
3/4"
108
126
210
180
5100
616805
2700
2000
5:1
3/4" (36 mm)
1"
108
128
210
186
5100
Industrial torque wrenches
Controlled force
The principle of transmitting forces is equal to all other torque wrenches. When the wanted
torque is reached, a special swivel causes the planned fold of the tool's lever. The wanted
torque needs to be always set before adding force.
The portable mechanism ensures controlled adding of force and safe work, also when it
comes to a fold of the lever, because there is no fear of the user loosing his balance due to the
tool’s bumping reactions. This is especially important when work is carried out on bridges,
overhead power lines, and everywhere the loss of balance could have fatal consequences.
Industrial torque wrench, 3/4”
265
Controlled torque
mechanism enables
stable and safe work.
Durable plastic
handle
Exact and
fast setting
of torque
3/4”
Long lever
Advantages
• Robust construction
• Long lever
• a wide turn angle lowers the chance
Important!
• Tool must be used with equal
•
•
•
•
•
pulls and in accordance with the
instructions in the manual.
Torque tightens only in the
direction showed on the key sticker!
Sticker shows the proper direction
of tightening!
The default calibration interval of
the torque wrench is 12 months
or 5.000 measurements from the
date of end user purchase.
ALWAYS set the measuring
mechanism to starting point, at
the end of work.
Torque wrench can be damaged,
if manual instructions are not
considered.
•
•
•
•
of overloading
Accurate results, to +/-4% even in
arduous working conditions
Cam control of the mechanism gives a
controlled break which will not throw
the operator off balance
The large break angle improves
accuracy by reducing the possibility
of over torquing
Dual scaled, Nm and lbf.ft
Use
• Heavy industry
• Building sector
• Shipbuilding
• Agricultural equipment
• Aeronautical industry
Standard: ISO 6789
L
616801
150-700
100-500
3/4"
1090
6300
616802
200-800
150-600
3/4"
1140
6400
616803
300-1000
200-750
3/4"
1470
7300
5
Pre-set torque wrenches
Simple and effective
The pre-set torque wrench is suitable for routine works like changing car tires and everywhere the same torque value is used.
Each wrench has its own factory preset and exactly defined maximum torque. The suitable
wrenches can easily be found, since they differ in typical colour. When the wanted torque
is achieved, the tool gives a warning sign in form of a “click”.
Available are two basic types of pre-set torque wrenches: torque wrench for cars (value
area of torques from 90 to 130 Nm) and torque wrench for trucks (value area of torques
from 400 to 600 Nm).
Advantages of pre-set torque wrenches
• Robust construction
• One torque value
• Persistence (consists of less parts)
267A
Pre-set torque wrenches for cars 1/2”
Easy to distinguish due to coloured
handles, enabling fast choice of the
right torque wrench.
Important!
• The torque tightens
1/2”
•
618915
90
66.4
Colour marking of the torque
on the handle
black
618916
100
73.7
yellow
400
1100
618917
110
81.1
grey
400
1100
618918
120
88.5
red
400
1100
618919
130
95.9
blue
400
1100
Way of marking torque wrenches
6
L
400
1100
•
only in the direction
shown on the sticker on
the wrench! The sticker
shows the right direction
of tightening!
The default calibration
interval of the wrench
is 12 months or 5.000
measurements from the
date of purchase.
Torque wrench can be
damaged, if manual
instructions are not
considered.
Pre-set torque wrenches for trucks 3/4”
267B
Easy to distinguish due to colored
handles, enabling fast choice of the
right torque wrench.
3/4”
Important!
• The torque tightens only in the
•
Colour marking of the torque
on the handle
graphite grey
950
4580
L
618920
400
295
618921
450
332
purple
950
4580
618922
500
369
khaki/sand
950
4580
618923
550
406
light blue
950
4580
618924
600
442
orange
950
4580
•
direction shown on the sticker on
the wrench! The sticker shows the
right direction of tightening!
The default calibration interval of
the wrench is 12 months or 5.000
measurements from the date of
purchase.
Torque wrench can be damaged,
if manual instructions are not
considered.
Way of marking torque wrenches
7
Adjustable torque wrenches
For precise tightening
An extremely useful type of torque wrench since whichever torque value up to 1000 Nm can
be preset. The slipper torque wrench is used for tightening of screws with an exactly prescribed torque, but is not suitable for the removal of nuts and screws.
Unior's adjustable torque wrenches are available in eleven editions, all of them made light
but compact and extremely accurate. The ribbed handle prevents slipping. Working with
them is therefore safe and pleasant, not to forget the better control and accuracy when
reaching the torque. When the appropriate torque is reached, the tool gives a distinctive
sound (“click”).
Advantages of adjustable
torque wrenches
• Light robust construction
• Wrench operates in clockwise and anti•
•
•
•
263A
clockwise directions
Overload protection
Warning sound when the wanted
torque is reached
Accurate calibration
Dual scaled, Nm and lbf.ft
Important!
• The torque tightens only in the direction shown on
•
•
•
the sticker on the wrench! The sticker shows the
right direction of tightening!
The default calibration interval of the wrench is 12
months or 5.000 measurements from the date of
purchase.
ALWAYS set the measuring mechanism to starting
point, at the end of work.
Torque wrench can be damaged, if manual
instructions are not considered.
Slipper torque wrench 1/2”
• Accuracy: +/- 3%
• Micrometer scale for simple and error free settings
• Adjustment lock to set torque
• Torque apply: both way, but always apply in
direction specified on torque wrench handle
• Handle: Two component material
• Default value for the recalibration interval is 12
month of use, or approximately 5.000 cycles!
263B
1/2”
620110
30-150
620111
50-250
620109
8-50
Slipper torque wrench 1/2”
• Accuracy: +/- 3%
• Micrometer scale for simple and error free settings
• Adjustment lock to set torque
• Torque apply: one-way, but always apply in direction
•
•
•
8
specified on torque wrench handle
Ratchet: works both way, 75 teeth and 5°turn angle
Handle: Two component material
Default value for the recalibration interval is 12 month
of use, or approximately 5.000 cycles!
1/2”
263L
How to properly use
the torque wrench:
Slipper torque wrench 1/2”
1/2”
• Double ended ratcheting spindles
• With overload protection
• Visual signal by pointer, when set torque is reached
• Supplied in durable storage case
• Dual scale lbf.ft and Nm
• Default value for the recalibration interval is 12
Standard: ISO 6789
month of use, or approximately 5.000 cycles!
L
607948
264
60-330
45-250
1/2”
675
1440
Slipper torque wrench
Use of torque wrench 264
1. Unscrew the lower screw to release the handle for torque setup.
• Reversible ratchet head
• For tightening on left and right hand threads
• Unmistakable signal when set torque is reached
• Default value for the recalibration interval is 12
2. With the handle, set the wanted torque.
month of use, or approximately 5.000 cycles!
Standard: ISO 6789
3. Tighten the lower screw to set the wanted torque.
L
615485
1/4”
2-24
20-200
275
750
615486
3/8”
5-110
5-80
306
1000
615487
1/2”
28-210
10-150
450
1670
615488
1/2”
35-350
25-250
635
2330
615489
3/4”
70-560
50-300
850
3780
615490
3/4”
140-700
100-500
1060
9000
615491
1”
140-980
100-700
1120
10000
4. SET and BEGIN to fasten (in the prescribed direction).
When the “click” comes, the wanted torque is achieved –
STOP TIGHTENING!
9
Standard torque wrenches
Without prior preparations
The standard torque wrench is a light and compact tool which differs from other wrenches
in the sense that the wanted torque does not need to be preset. The torque is spread continuously variable where the measuring mechanism simultaneously marks the momentary
torque value, when a screw or nut is tightened. The torque value can also be read later on
with the help of a measuring indicator with integrated memory, saving the last set torque.
This is the reason why the memory indicator needs to be set to starting position on the
measuring scale after work.
The two-sided bit for the socket enables the tool to be used from the left as well as from the
right side. Therefore the wrench is also suitable for work in tight and difficult-to-reach areas.
Advantages of standard
torque wrenches
• Light and robust tool
• Ergonomic rubber for better grip and easier work
• Torque is spread continuously
• No torque pre-setup needed
• Large and glass-protected measuring scale
• Memory indicator showing the last set torque
260
Dial torque wrench 1/4”
Extremely light and persistent
construction of the torque wrench
Art. 260 = 0.52 kg
Art. 261 = 0.52 kg
Art. 262 = 1.5 kg
Important!
• The torque tightens only in the direction
•
•
•
shown on the sticker on the wrench! The
sticker shows the right direction of tightening!
The default calibration interval of the wrench
is 12 months or 5.000 measurements from the
date of purchase.
ALWAYS set the measuring mechanism to
starting point, at the end of work.
Torque wrench can be damaged, if manual
instructions are not considered.
Compact and robust construction,
insensible to weather and other
environmental conditions.
An additional memory indicator which
saves the last set torque.
Anatomic handle enabling the torques to
be carried out without effort.
1/4”
Protected scale of
the torque wrench
Regulation of the
memory indicator
Unique ID number
of the torque
Standard: ISO 6789
• Fitted with double ended
ratcheting spindles
• Overload protection
• Visual signal by pointer, when set
•
torque is reached
Supplied in durable storage case
607138
10
2.4-12
4-120
a
L
61
244
1/4"
520
Simple use:
The torque can be
applied from both
sides of the wrench.
261
Dial torque wrench 3/8”
3/8”
Standard: ISO 6789
• Fitted with double ended
ratcheting spindles
Overload protection
Visual signal by pointer, when set
torque is reached
Supplied in durable storage case
•
•
•
607139
262
8-40
20-360
a
L
69
244
3/8"
520
Dial torque wrench 1/2”
1/2”
Standard: ISO 6789
• Fitted with double ended
•
•
•
ratcheting spindles
Overload protection
Visual signal by pointer, when set
torque is reached
Supplied in durable storage case
607140
16-80
50-600
a
L
86
435
1/2"
1500
11
Measuring instruments
271
Vernier
270A
• Resolution: 0.01 mm/0.0005”
• Measuring speed: 1.5 m/sec
• Function: measurement of
• Resolution: 0.01 mm/0.0005”
• Function: measurement of
internal dimensions, of external
dimensions, of depth, of steps
internal dimensions, of external
dimensions, of depth, of steps
612035
272
D
B
L
0 - 150
40
235
135
External micrometer
• Made of quality casting.
•
•
•
Measuring surface made of
hardened alloy
Spindle: 6.5 mm dia., with
locking lever and ratchet
According to DIN 863
Measuring range: 0-25 mm,
minimal reading: 0.01 mm
617698
12
Digital vernier
202
619881
D
B
L
0 - 150
40
235
170
Measuring tapes
710P
Measuring tape
710W
Folding Rule
• Plastic double component casing
• With stop and clip
m
ft
D
612131
2
16
101
612132
3
16
123
612133
5
19
212
612134
8
25
447
612135
10
25
499
612784
2
16
101
6
612785
3
10
16
123
612786
5
16
19
212
612787
8
26
25
447
612788
10
33
25
499
710R
• Beech wooden folding rules
• mm - graduation printed in both sides
• Preciseness to class III
609365
m
D
2
16
110
Measuring tape
• Plastic double component casing
• With stop and clip
m
ft
D
612789
2
16
100
612790
3
16
120
612791
5
19
170
612792
8
25
400
612793
2
6
16
100
612794
3
10
16
120
612795
5
16
19
170
612796
8
26
25
400
13
Level
Alu-spirit level
1250
300
220
610717
400
270
610718
500
340
610719
600
380
610720
800
510
610721
1000
600
610722
1200
680
610723
1500
900
610724
2000
1200
• Quality aluminium profile,
•
•
•
•
•
dimension 48 x 22 mm
Silver eloxated surface
Fitted with shock-proof plexi vials
Accurate to 0.5 mm/m
Accuracy electronically tested
hereby increasing their rigidity and resistance to deformation
Horizontal vial with fluorescent background allows measuring also
in places lacking the light
L
Alu-spirit level with magnet
1252
Spirit level professional
• With one horizontal and two vertical plexiglass vial
• Measuring accuracy of 0.5 mm/m in normal position
• Measuring accuracy of 0.75 mm/m in inverted position
• Walls are thicker, strengthened with ribs outside and walls inside,
L
610716
1255
618874
300
350
618875
400
440
618876
500
540
618877
600
630
618878
800
820
618879
1000
1000
618880
1200
1190
618881
1500
1470
618882
1800
1750
618883
2000
1930
618884
2500
2390
1255H
Spirit level professional,
with handles
• Quality aluminium profile,
dimension 48 x 22 mm
• Silver eloxated surface
• Fitted with shock-proof
L
610725
400
270
610726
500
340
610727
600
380
610728
800
510
610729
1000
600
•
•
•
plexi vials
Accurate to 0.5 mm/m
Accuracy electronically tested
The measuring surface is
equipped with two magnets
Torpedo spirit level
1253
• With one horizontal and two vertical plexiglass vial
• Two integrated ergonomically shaped handles
• Measuring accuracy of 0.5 mm/m in normal position
• Measuring accuracy of 0.75 mm/m in inverted position
• Walls are thicker, strengthened with ribs outside and walls inside,
•
hereby increasing their rigidity and resistance to deformation
Horizontal vial with fluorescent background allows measuring also
in places lacking of light
L
• Casing made of high
L
617699
300
336
617700
400
435
617701
500
534
617702
600
640
14
•
•
•
aluminium alloy Al Si12
With 2 vials
With milled measuring surface
Accuracy: 0.5 mm/m
618885
600
680
618886
800
870
618887
1000
1060
618888
1200
1260
618889
1500
1540
618890
1800
1830
618891
2000
2020
618892
2500
2480
Squares
Try squares
1260/7
• Material: constructional steel
• Surface finish: zinc plated
• Accuracy: +/- 0.0285° = 0.5 mm/m
• Material: constructional steel
• Measuring faces are finely ground
• Accuracy: 0.01425° = 0.25 mm/m
610730
L1
L2
A
125
85
5
Mason’s square
1262/5
180
610731
150
100
5
210
610732
200
130
5
390
610733
250
165
5
490
610734
300
200
5
560
L1
L2
610740
125
85
A
5
180
610741
150
100
5
210
610742
200
130
5
390
610743
250
160
5
490
610744
300
175
5
560
Mason’s square with back
1262/5A
Try square with back
1260/7A
• Material: constructional steel
• Surface finish: zinc plated
• Accuracy: + /- 0.0285° = 0.5 mm/m
• Back is screwed on the short leg
• Material: constructional steel
• Measuring faces are finely ground
• Accuracy: 0.01425° = 0.25 mm/m
• Back is screwed on the short leg
L1
L2
A
610735
125
85
5
180
610736
150
100
5
210
610737
200
130
5
390
610738
250
165
5
490
610739
300
200
5
560
L1
L2
617154
125
85
A
5
250
617155
150
100
5
300
617156
200
130
5
390
617157
250
160
5
570
617158
300
175
5
650
Try square
1263
• Measuring blade made from hardened spring steel, 40 × 1.2 mm,
•
•
with mm – graduation
The support blade made of black anodized aluminium profile ,
L-form 40 x 14 mm
Accuracy: 0.5 mm/m
L1
L2
617693
250
135
180
617694
300
135
200
617695
350
190
270
617696
400
190
290
617697
500
210
330
15
Mason’s profiles
1270
Feeler gauges
Mason’s staff
701
Feeler gauge
• Conformity certificate
• Stainless steels
• Made of quality aluminium profile
• At the end the profile is protected with plastic inserts
• With two integrated vials
• Used for measuring and flattening of bigger vertical and
601896
0.05-0.5
8
601897
0.05-1
13
601898
0.05-1
20
701 A
Screw pitch gauges
horizontal surfaces in construction
L
B
A
610745
2000
100
18
1800
610746
2500
100
18
2300
610747
3000
100
18
2700
610748
4000
100
18
3600
1272
Mason’s profile
• Conformity certificate
• Stainless steel
• For outside and inside measurements
• Metric - thread: 0.4-7 (28 gauges)
• Whitworth - thread: 4-62 (20 gauges)
616706
• Made of quality aluminium profile
• With two integrated handles and two vials
• Used for working front, pavement, roughcast, first of all for
easier and accurate work in construction
L
B
A
610751
1000
100
18
900
610752
1500
100
18
1350
610753
2000
100
18
1800
610754
2500
100
18
2300
610755
3000
100
18
2700
610756
4000
100
18
3600
16
48
Other measuring instruments
1279
Scriber
1290/5
Rumb
• Made from quality steel
• Equipped with pocket clip
• With a point that assures long life of drawing
on different hard grounds
• Made from quality steel
• With 4 meter long string
L
617692
1280
150
37
Flat rule
1299
• Made of silver anodized aluminium profile
•
617725
170
Carpenter’s pencil
• Made from quality wood
• Graphite hardness HB
cross section 60 x 5 mm, with facet
With one side mm-graduation
L
L
617703
400
256
617704
500
319
617705
600
383
617706
800
508
617707
1000
630
617724
180
7
17
Conversion factors
Conversion of torque units
measure unit
measure unit
Ncm
Nm
kpcm
kpm
lbf.in.
lbf.ft.
= Ncm
= Nm
= kpcm
= kpm
= lbf.in.
= lbf.ft
1
100
9.807
980.07
11.298
135.58
0.01
1
0.09807
9.807
0.11298
1.3558
0.10197
10.197
1
100
1.152
13.825
0.00102
0.10197
0.01
1
0.01152
0.13825
0.0885
8.851
0.868
86.796
1
12
0.00738
0.7376
0.0723
7.233
0.0833
1
Conversion of power units
measure unit
measure unit
N
kN
kg
g
mg
lb
=N
= kN
= kg
=g
= mg
= lb
1
1000
9.807
0.009807
0.000009807
4.448
0.01
1
0.009807
0.000009807
9.807e-9
0.004448
0.102
102
1
0.001
0.000001
0.4536
102
102000
1000
1
0.001
453.6
102000
102000000
1000000
1000
1
453600
0.2248
224.8
2.205
0.002205
0.000002205
1
Conversion of geometric units
measure unit
inch
yard
foot
km
m
mm
micron
nm
measure unit
= inch
= yard
= foot
= km
=m
= mm
= micron
= nm
1
36
12
39370
39.37
0.03937
0.00003937
3.937e-8
0.02778
1
0.3333
1094
1.094
0.001094
0.000001094
1.094e-9
0.08333
3
1
3281
3.281
0.003281
0.000003281
0.000
0.0000254
0.0009144
0.0003048
1
0.001
0.000001
1e-9
1e-12
0.0254
0.9144
0.3048
1000
1
0.001
0.000001
1e-9
25.4
914.4
304.8
1000000
1000
1
0.001
0.000001
25400
914400
304800
1000000000
1000000
1000
1
0.001
25400000
914400000
304800000
1000000000000
1000000000
1000000
1000
1
Conversion of energy units
measure unit
kJ
kcal
cal
kWh
Wh
Ws
BTU
18
measure unit
= kJ
= kcal
= cal
= kWh
= Wh
= Ws
= BTU
1
4.187
0.004187
3600
3.6
0.001
1.055
0.2388
1
0.001
859.8
0.8598
0.0002388
0.252
238.8
1000
1
859800
859.8
0.2388
252
0.0002778
0.001163
0.000001163
1
0.001
2.778e-7
0.0002931
0.2778
1.163
0.001163
1000
1
0.0002778
0.2931
1000
4187
4.187
3600000
3600
1
1055
0.9478
3.968
0.003968
3412
3.412
0.0009478
1
Conversion of pressure units
measure unit
bar
kPa
hPa
milibar
Pa
kgf/m2
psi
measure unit
= bar
= kPa
= hPa
= milibar
= Pa
= kgf/m2
= psi
1
0.01
0.001
0.001
0.00001
0.00009807
0.06895
100
1
0.1
0.1
0.001
0.009807
6.895
1000
10
1
1
0.01
0.09807
68.95
1000
10
1
1
0.01
0.09807
68.95
100000
1000
100
100
1
9.807
6895
10200
102
10.2
10.2
0.102
1
703.1
14.5
0.145
0.0145
0.0145
0.000145
0.001422
1
Conversion of speed units
measure unit
measure unit
km/s
m/s
mph
sea mile per hour
= km/s
= m/s
= mph
= sea mile per hour
1
0.001
0.000447
0.0005144
1000
1
0.447
0.5144
2237
2.237
1
1.151
1944
1.944
0.869
1
Conversion of angle units
measure unit
deg
rad
grad
measure unit
= deg
= rad
= grad
1
57.3
0.9
0.01745
1
0.01571
1.111
63.66
1
Conversion of flow rates
measure unit
l/min
m3/min
cm3/min
measure unit
l/min
m3/min
cm3/min
1
1000
0.001
0.001
1
0.000001
1000
1000000
1
19
UNIOR d.d.
Kovaška cesta 10
3214 Zreče
Slovenia
T: +386 (0) 3 757 81 00
F: +386 (0) 3 576 26 43
E: [email protected]
I: www.uniortools.com
621517