0.72 Cool White140° Beam Angle LED Module Spec Sheet

0.72 Cool White140° Beam Angle
LED Module Spec Sheet
Specifications
Beam Angle
Color
Power Consumption
Brightness
LED Type
Driving Mode
Warranty
Max. Connection
Certification
Waterproof Rating
LED Life Span
Installation Method
:
:
:
:
:
:
:
:
:
:
:
:
140°
Cool White
0.72w / module
80lm / module
SMD 2835
Constant voltage
5 yrs
50 pcs/line
RU
IP68
50,000 hrs
Temporary 3M tape applied.
Silicone finish is needed to
permanent installation.
Dimensions(mm)
3.25”
140º
5.5”
0.5”
3.25”
3.25”
5.5”
2.25”
5.5”
5.5”
2.25”
10”
/ledmodulescom
/ledmodulescom
/ledmodulescom
www.ledmodules.com | 7000 North Freeway ste 200 Houston, TX 77076 | 832-804-6781 | [email protected]
0.72 Cool White140° Beam Angle
LED Module Spec Sheet
CAUTION
Keep extension lead wires as short as possible.
Installation
DC Output
in Series
AC Output
Power Supply
CAUTION
LED V+ wires are white and the wires
in this diagram are colored on purpose
for indication
Make sure that each run should have 50 modules at max
and should use another run in parallel to connect more
1st
50th
2nd
AC Output
in Parallels
Power Supply
1st
1st
1st
1st
1st
2nd
2nd
2nd
2nd
2nd
50th
50th
50th
50th
50th
/ledmodulescom
/ledmodulescom
/ledmodulescom
www.ledmodules.com | 7000 North Freeway ste 200 Houston, TX 77076 | 832-804-6781 | [email protected]
0.72 Cool White140° Beam Angle
LED Module Spec Sheet
Power Specifications
1. Power Specificaons
Power Consumpon
Current
Voltage
Max. Parallel Connecon
2 Led
0.48W
0.04A
12V
100 Ea
3 Led
0.72W
0.06A
12V
50 Ea
4 Led
0.96W
0.08A
12V
50 Ea
4 Led RGB
1.44W
0.06A
12V
50 Ea
2. Module Installaon
A. Clean surface of the installaon area
B. Drill a hole for power wire
C. Peel and sck modules. Standard module distance is about 2.75 ~ 3" for 1st floor sign and this
distance can be increased as sign goes up in higher locaon.
**Warning. Never apply pressure directly on LED light secon
D. Pull out power wire through the hole and seal it.
E. Apply small amount of silicon at the bo•om or top of each module to secure them.
F. Connect to power supply.
3. Max. Module Connecon per Power Supply with 20% reserved power
Module
0.24W
0.48W
0.72W
0.96W
1.14W
1.44W
Power Supply 60W
200 ea
100 ea
67 ea
50 ea
42 ea
33 ea
Power Supply 100W
333 ea
167 ea
111 ea
83 ea
70 ea
56 ea
/ledmodulescom
Power Supply 150W
500 ea
250 ea
167 ea
125 ea
105 ea
83 ea
/ledmodulescom
/ledmodulescom
www.ledmodules.com | 7000 North Freeway ste 200 Houston, TX 77076 | 832-804-6781 | [email protected]