Cat
®
TH514C
TELEHANDLER
Specifications
Engine
Model
Gross Power (ISO 14396)
Maximum Torque
Bore
Stroke
Displacement
Hydraulic System
Cat® C3.4B*
74.5 kW
100 hp
420 N·m/1,400 rpm
99 mm
3.90 in
110 mm
4.3 in
3.4 L
207.5 in3
* meets U.S. EPA Tier 4 Interim Emission Standards
11 320 kg
23,722 lb
4990 kg
11,000 lb
13.7 m
13.7 m
9.2 m
34.7 kph
45 ft
45 ft
30 ft 3 in
21.6 mph
1814 kg
3175 kg
4,000 lb
7,000 lb
454 kg
1361 kg
3.92 m
5.57 m
98 kN
1,000 lb
3,000 lb
12 ft 10 in
18 ft 3 in
22,037 lb
150 L
90 L
39.63 gal
23.78 gal
Operating Specifications
Rated Load Capacity
Maximum Lift Height
Stabilizers Up
Stabilizers Down
Maximum Forward Reach
Top Travel Speed
Load at Max Height
Stabilizers Up
Stabilizers Down
Load at Max Reach
Stabilizers Up
Stabilizers Down
Outside Turning Radius Over Tires
Outside Turning Radius Over Forks
Drawbar Pull 74.5 kW
21.13 gal/min
15.85 gal/min
Forward
1
2
3
4
Reverse
1
2
3
5.8 kph
10.8 kph
24.5 kph
34.7 kph
3.6 mph
6.7 mph
15.2 mph
21.6 mph
5.5 kph
10.8 kph
24 kph
3.4 mph
6.7 mph
14.9 mph
Boom Up
Boom Down
Tele In
Tele Out
Crowd Forward (dump)
Crowd Backward
Combined
Up and Out
Down and In
Bucket Breakout Force to ISO 8313
Boom Breakout Force
13.7 Seconds
14.6 Seconds
19.1 Seconds
16.6 Seconds
4.8 Seconds
4.7 Seconds
28.0 Seconds
19.0 Seconds
69 kN
95 kN
Sound
Tires
Exterior Sound (74.5 kW Engine)
Standard 14.00-24 16PR TG-02
Brakes
Service Brakes
Parking Brakes
80 L/min
60 L/min
Boom Performance
Service Refill Capacities
Fuel Tank
Hydraulic Tank
Auxiliary Hydraulic Supply
Intermittent
Continuous
250 bar
3,626 psi
150 L/min
39.63 gal/min
Variable displacement load
sensing axial piston pump
Transmission Speeds
Weights
Operating Weight with Carriage & Forks
Maximum System Pressure
Maximum Pump Flow
Pump Type
Servo assisted on front axle
Mechanical on front axle
106 dB(A)
15,512 lb
21,357 lb
TH514C Telehandler
Dimensions
All dimensions are approximate.
880 mm (34.65 in)
2630 mm
(103.54 in)
1979 mm
(77.91 in)
401 mm (15.79 in)
1239 mm
(48.77 in)
2036 mm (80.15 in)
2449 mm (96.06 in)
3200 mm (125.98 in)
5091 mm (200.43 in)
6520 mm (256.69 in)
Load Chart and Dimensions
TH514C Stabilizers Up
3175 kg (7,000 lb)
13.4 m (44 ft)
D
12.1 m (40 ft)
12.1 m (40 ft)
2.4 m (8 ft)
1.2 m (4 ft)
0 m (0 ft)
lb)
lb)
2268 kg (5,000
B
8.5 m (28 ft)
408
(9,0002 kg
lb)
A
6.1 m (20 ft)
4990 kg (11,000 lb)
30°
7.3 m (24 ft)
20°
4.9 m (16 ft)
3.7 m (12 ft)
10°
2.4 m (8 ft)
0 lb)
lb)
10°
1361 kg (3,000
3.7 m (12 ft)
907 kg (2,000
lb)
20°
454 kg (1,000
4.9 m (16 ft)
lb)
6.1 m (20 ft)
3175 kg (7,000
30°
7.3 m (24 ft)
C
40°
9.7 m (32 ft)
B
8.5 m (28 ft)
50°
lb)
40°
D
10.9 m (36 ft)
2268 kg (5,000
lb)
9.7 m (32 ft)
C
1361 kg (3,000
lb)
50°
10.9 m (36 ft)
70°
60°
A
4990 kg (11,00
60°
4082 kg (9,000
13.4 m (44 ft)
14.6 m (48 ft)
70°
1814 kg (4,000 lb)
3175 kg (7,000
lb)
14.6 m (48 ft)
TH514C Stabilizers Down
1.2 m (4 ft)
0°
0 m (0 ft)
24"
–1.2 m (–4 ft)
10.9 m 9.7 m 8.5 m 7.3 m 6.1 m 4.9 m 3.7 m 2.4 m 1.2 m 0 m
(36 ft) (32 ft) (28 ft) (24 ft) (20 ft) (16 ft) (12 ft) (8 ft) (4 ft) (0 ft)
–2.6°
24"
–1.2 m (–4 ft)
10.9 m 9.7 m 8.5 m 7.3 m 6.1 m 4.9 m 3.7 m 2.4 m 1.2 m 0 m
(36 ft) (32 ft) (28 ft) (24 ft) (20 ft) (16 ft) (12 ft) (8 ft) (4 ft) (0 ft)
IMPORTANT
Rated lift capacities shown are with machine
equipped with carriage and pallet forks.
The machine must be level on a firm surface with
undamaged, properly inflated tires as specified
by the manufacturer. Machine specifications
and stability are based on rated lift capacities
at specific boom angles and boom lengths.
(If specifications are critical, the proposed
application should be discussed with your dealer.)
DO NOT exceed rated lift capacity loads, as unstable
and dangerous machine conditions will result.
DO NOT tip the machine forward to determine the
allowable load.
Due to continuous product improvements, machine
specifications and/or equipment changes may be
made without prior notification. This machine meets
or exceeds ANSI/ITSDF B56.6-2005 as originally
manufactured for intended applications.
Use only JLG approved attachments with proper
material handler model/attachment load capacity
charts displayed in the operator’s cab. OSHA requires
all rough terrain forklift operators be trained
according to OSHA 29 CFR 1910.178 (l).
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com
© 2013 Caterpillar
All Rights Reserved
Printed in U.S.A.
Materials and specifications are subject to change without notice. Featured machines in photos may include additional
equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as
well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
AEHQ6930 (02-13)