• Manhole covers
• Gully covers
• Support frames
The manhole and gully covers are produced from expanded FILS 21
sheet-metal and have a side frame and suitably sized support flats and are
ready to use.
There are many possible applications for manhole covers, especially for
covering inspection tunnels and for all kinds of pipe-ways.
The gully covers are ideal for drains and small aeration tunnels.
All the manhole and gully covers have PEDESTRIAN LOAD CAPACITY.
There are many advantages in using FILS gully and manhole covers.
In fact, the mesh is high-heel safe and non-slip and allows for earth,
general dirt, snow (thus preventing the formation of ice) and water to pass.
The standard sizes of gully and manhole covers available are shown in the
tables.
Gully and manhole covers can also be made to order.
46
Manhole cover
Dimensions in mm
Various outside measurements
ZANCA 40x12
A
SECT. A-A
28
Various DC
approx. 20
A
Various outside measurements
25
Various DL
LOAD-BEARING
CROSS-BARS
28x28x2
END SHOULDERS
15
Support frame
TYPE
Fils 21
sp 3 mm
Support frames
28x28x2
DL
mm
200
250
300
350
400
500
210
260
310
360
410
510
H
mm
25
25
25
25
25
25
28
28
28
28
28
28
DC
mm
200
250
300
350
400
500
210
260
310
360
410
510
Unit weight
kg
1.6
2.2
3
4.5
5.5
8.3
0.6
0.8
0.9
1.1
1.3
1.6
Gully and manhole covers can be made to order.
Gully cover
Dimensions in mm
DL 500/1000/1500
A
A
510/1010/1510
DC 200/300
approx. 20
25
SHOULDERS
Le fotografie delleENDreti,
corrispondono
28x28x2
Support frame
15
LOAD-BEARING
dati evidenziati
dalCROSS-BARS
colore.
SECT.aiA-A
TYPE
Fils 21
sp 3 mm
Support frames
28x28x2
DL
mm
500
1000
1500
510
1010
1510
H
mm
25
25
25
28
28
28
DC
mm
200
200
300
210
210
310
Unit weight
kg
3.3
6.4
13
1.2
2
3
47