FARMA - CHEM SA
INDUSTRIAL AREA OF SINDOS, THESSALONIKI
TEL.:+30 2310 - 569 630- 33 FAX:+30 2310 - 797 047
http://www.farmachem.gr, e-mail: [email protected]
TECHNICAL DATA SHEET
PRODUCT: POWER-1 N
POWER-1 N is a product of slow release nitrogen. As a result the product provides the
plants with nitrogen that is easily available for a long time. Moreover, gradual assimilation
by the plants protects them from the unfavorable effects of rapid and increased nitrogen
absorption.
POWER-1 N is a liquid fertilizer with organic nitrogen of advanced technology. It is
safe, secure and dense solution of slow release, ideal for all crops.
POWER-1 N contrary to the simple nitrogen fertilizers doesn’t cause osmotic stress and
as a result doesn’t have toxic effects on the plants (salinity factor of the product is
almost zero).
POWER-1 N is very resilient is not hydrolyzed after application on the leafage. A large
part of the product will penetrate the cellular membranes and enters the plants within 5-7
hours, where it is transferred, stored, metabolized and used. Full absorption takes place
within the next 30 hours.
4 kg of nitrogen from the product applied on 1000m2 of grass preserve the process of
photosynthesis for 8-12 weeks contrary to simple urea, whose action stops within 4-6
weeks (same quantity applied).
When applied on the soil the water inside the product is removed, POWER -1 N
becomes jelly and is polymerized to a large extent and finally binds on the soil particles.
As a result the largest macromolecules that have been formed release nitrogen slowly,
depending on the temperature, humidity and microorganism activity in the ground.
Composition (w/v):
Nitrogen (N) total
Uric
Ammoniate
Nitric
POWER-1 N
32.2%
16%
8%
8%
1
Applications:
POWER-1 N is recommended for all crops and in every stage of the plant’s biological
cycle. It can also be used when the plants are under stress and in addition when the
temperature doesn’t allow the application of other nitrogen fertilizers.
Leaf applications:
In general: 100-400 cc in 100 lt water (approximately 0.1 ha).
Indicative applications-Dosage:
Stone fruits- Pomes trees
Vineyard
Olive
Cotton
Vegetables
2 applications after the calyx falls, with 200
cc in 100 kg water.
First application when the vegetation begins
with 150-200 cc in 100 lt water and the 2nd
when the berries are swelling with the same
quantity.
When blossoming begins or after the fruits
have set with 200-300cc in 100 lt water.
From the 6 leaves stage until the first boll
sets, 200-300 cc in 100 lt water, depending
on the liveliness of the variety.
After the first fruit has set, 200 cc in 100 lt
water.
Indicative applications in irrigation systems:
Grass: POWER-1 N is ideal for grass and it can be applied in all crops and in every
season.
300-1300 ml/100m2/10 lt water. Can be combined with other products.
Apple: 0.7-1.2 lt /0.1 ha during vegetal growth, to promote blossoming and 0.7-1.2 lt /0.1
ha 40 days before harvesting for size.
Citrus trees: 0.7-1.2 lt /0.1 ha before blossoming or during blossoming to ensure better
setting of the fruits and repeat after 30 days. Secondary applications when there are
nitrogen deficiencies.
Cotton: 0.5-0.7 lt /0.1 ha when the first real leaves come out. In post emergent stage 0.20.7 lt/0.1 ha to reinforce physical and chemical procedures. For the development of the
bolls 0.7-2.3 lt /0.1 ha when the first bolls are forming and repeat after 14-21 days.
Carrots: 0.7-1.4/0.1 ha when the plants are 7.5-15 cm tall. Repeat after 3 weeks.
Potato: 1 application in 2 lt /0.1 ha in the middle of tuber-forming process and repeat every
10-14 days until the tubers are fully grown.
Grapes: 0.7-2 lt/0.1 ha when there are nitrogen deficiencies.
Lettuce: 1.6-2 lt /0.1 ha after thinning. Repeat after 14 days and third application 14 days
before harvest.
Cabbage, Broccoli etc: 1.6-2 lt when the “heads” begin shaping and repeat 7-10 days later.
Onions: 1.6 lt/0.1 ha when the plants are 15-20 cm tall. Repeat when the bulbs are filling
up and 3rd application 2 weeks before harvest.
Tomato: 0.5-2 lt/0.1 ha when blossoming begins. Repeat when the fruits are setting 15-30
days later. Last application with 0.2-.3 lt/0.1 ha 3-4 weeks before harvest.
POWER-1 N
2