Analyte Name
CAS Number
Acenaphthene also see PAH scans
83-32-9
Fee Per Sample*
Method
Method Link*
Technique
Media*
Flow Rate (Lpm)*
Air Volume (L)*
RL (µg)*
Compatibility Code
Notes*
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
HPLC
SG-T2 (SKC 226-119)
0.1-1.5
1-15
0.5
5
Store cold; flow rate/volume from NIOSH 2016.
0.05
3
2
19
0.2
48
6
-
Cold shipment not required, but store cold before shipping.
Call laboratory before sampling – reagent needed for analysis not available when this document was published.
Acenaphthylene also see PAH scans
208-96-8
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
Acetaldehyde also see aldehyde scans
75-07-0
EPA TO-11
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to11ar.pdf)
Acetaldehyde also see aldehyde scans
75-07-0
OSHA 68
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
68/org068.pdf)
GC/NPD
XAD2-T1; for TWA use SKC 226-117 or ORBO 24; for STEL use SKC 22654
Acetic acid
64-19-7
OSHA PV 2119
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv211
9/pv2119.html)
IC
CT (SKC 226-01)
GC/FID
CT (SKC 226-01)
0.01-1
20-300
20
-
IC
SG-T12 (SKC 226-10-03 or ORBO 53)
0.05-0.2
1-24
6
35
Acetic acid
64-19-7
NIOSH 1603
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1603.pdf)
Acetic acid
64-19-7
NIOSH 2011
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2011.pdf)
Acetoin
513-86-0
OSHA 1013
[View]
(https://www.osha.gov/dts/sltc/methods/validated/10
13/1013.pdf)
GC/FID
SG – washed & baked (226-183: set of 2 tubes)
0.05 (0.2 for STEL)
9 (3 for STEL)
1
42
Protect samples from light during and after sampling, using tube holders, aluminum foil, or other means. Store cold.
Acetoin
513-86-0
OSHA 1012
[View]
(https://www.osha.gov/dts/sltc/methods/validated/10
12/1012.pdf)
GC/ECD
SG – washed & baked (226-183: set of 2 tubes)
0.05 (0.2 for STEL)
9 (3 for STEL)
0.05
41
Protect samples from light during and after sampling, using tube holders, aluminum foil, or other means. Store cold.
Acetone
67-64-1
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.5-3
3
1
Acetonitrile
75-05-8
NIOSH 1606
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1606.pdf)
GC/FID
CT (SKC 226-09)
0.01-0.2
3-25
4
17
Acetonitrile
75-05-8
OSHA 37
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
37/org037.html)
GC/NPD
CT (SKC 226-01)
0.2
8-48
1
17
Acrolein
107-02-8
NIOSH 2501
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2501.pdf)
GC/NPD
XAD2-T1; for TWA use SKC 226-117 or ORBO 24; for STEL use SKC 22654
0.01-1.0
8-48
2
19
0.1
48
2
19
1
120
0.5
-
Preferred method
Acrolein
107-02-8
OSHA 52
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
52/org052.html)
GC/NPD
XAD2-T1; for TWA use SKC 226-117 or ORBO 24; for STEL use SKC 22654
Acrylamide
79-06-1
OSHA PV 2004
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv200
4/2004.html)
HPLC
OVS-7 (SKC 226-57)
GC/NPD
GFF-13mm / SG (SKC 226-10 or 226-15)
1
120
0.4
-
Sampling train; store cold; transfer completed sample to 1ml glass vial w/methanol
HPLC
Anasorb 708 (2 tubes) (SKC 226-30-08)
0.1
24
2
-
Store cold; protect samples from light; separate tubes after sampling
Store cold; protect samples from light; separate tubes after sampling
Acrylamide
79-06-1
OSHA 21
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
21/org021.html)
Acrylic acid
79-10-7
OSHA PV 2005
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv200
5/2005.html)
HPLC
Anasorb 708 (2 tubes) (SKC 226-30-08)
0.1
24
2
-
GC/FID
CT (SKC 226-01)
0.01-0.2
3.5-20
3
1
Acrylic acid
79-10-7
OSHA 28
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
28/org028.html)
Acrylonitrile
107-13-1
NIOSH 1604
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1604.pdf)
Acrylonitrile
107-13-1
OSHA 37
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
37/org037.html)
GC/NPD
CT (SKC 226-01)
0.2
20
1
-
Aldrin
309-00-2
EPA TO-10A
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to10ar.pdf)
GC/ECD
PUF
1.0-5.0
240-7200
0.05
29
Alkaline dust
-
NIOSH 7401
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7401.pdf)
Wet Chem
PTFE-1µm
1.0-4.0
70-1000
60
20
Allyl alcohol
107-18-6
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
3
1
Store cold; wrap in foil for shipment; holding time is 7 days
Note OSHA 7 is analytically equivalent to NIOSH method.
Allyl chloride
107-05-1
NIOSH 1000
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1000.pdf)
GC/FID
CT (SKC 226-01)
0.01-1.0
15-100
3
1
Aluminum
7429-90-5
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
10-400
1
7
Gravimetric
PVC
1.5–2.0
25-1000
50
-
Cannot be done as aluminum.
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-0.2
4-24
1
-
Keep samples frozen. See method if long-term storage (more than 2 wks) required.
Cannot use this method for aluminum oxide –see aluminum oxide. Do not exceed 2 mg of total dust on filter.
Aluminum oxide
1344-28-1
NIOSH 0500
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/0500.pdf)
Aminoethanol, 2
141-43-5
NIOSH 2007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2007.pdf)
Ammonia
7664-41-7
NIOSH 6016
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/6016.pdf)
IC
SG-T3 (SKC 226-10-06)
0.1-0.5
0.1-96
10
-
Formerly cited as NIOSH S-347, 2nd Ed. (same media). Can use MCE as prefilter, if concerned w/ particulate interferences.
Ammonia
7664-41-7
OSHA ID-164
[View]
(https://www.osha.gov/dts/sltc/methods/partial/id164/
id164.html)
Wet Chem
0.1N H2SO4 (FGB)
1
120
50
-
Ship samples to lab in glass vials w/ Teflon-lined caps.
Amyl acetate,n-
628-63-7
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
3
1
Aniline
62-53-3
NIOSH 2002
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2002.pdf)
GC/FID
SG (SKC 226-10 or 226-15)
0.02-0.2
5-30
2
18
Anthracene also see PAH scans
120-12-7
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Anthracene also see PAH scans
120-12-7
OSHA 58
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
58/org058.html)
HPLC
GFF-37mm
2
960
3
6
Protect from light; wipe inside of cassette with filter, and transfer filter to vial w/ teflon lined cap
Antimony
7440-36-0
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
10-400
1
7
Do not exceed 2 mg of total dust on filter.
Antimony
7440-36-0
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
ICP
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
ICP
MCE – treated (see notes, at right)
1.0 – 3.0
MCE (or PVC-PW w/ total dust)
2
30-480
1
8
Welding fume method.
5-2000
1
7
Do not exceed 2 mg of total dust on filter.
30-1000
0.01
-
Filters are special order. Once lab treats the filters, samples must be collected w/in 1 week. Do not exceed 2 mg of total dust
loading.
Arsenic
7440-38-2
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
Arsenic trioxide
1327-53-3
NIOSH 7901
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7901.pdf)
Arsine (as Arsenic)
7784-42-1
NIOSH 6001
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/6001.pdf)
ICP/MS
CT (SKC 226-01)
0.01-0.2
1.0-10
0.02
-
Asbestos
1332-21-4
NIOSH 7400A
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7400.pdf)
PCM TEM
MCE-25 mm
0.5-16
400-5000
5 f/mm2
21
Both methods: Sample open-faced.
Asbestos
1332-21-4
NIOSH 7402
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7402.pdf)
PCM TEM
MCE-25 mm
0.5-16
400-5000
2 f/mm2
21
Both methods: Sample open-faced.
-
-
-
-
-
-
-
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
10-400
1
7
Do not exceed 2 mg of total dust on filter.
Asphalt fumes See coal tar pitch volatiles
and/or benzene solubles
8052-42-4
OSHA 58
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
58/org058.html)
Barium
7440-39-3
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
Benzaldehyde also see aldehyde scans
100-52-7
EPA TO-11
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to11ar.pdf)
HPLC
SG-T2 (SKC 226-119)
0.1-1.5
1-15
0.5
5
Store cold; flow rate/volume from NIOSH 2016. See EPA method for more information on special sampling situations.
Benzene
71-43-2
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
5-30
1
1
Note that OSHA 1005 is written for passive monitors (SKC 575-002 or 3M 3520). Lab will cite equivalent analytical method
(OSHA 7).
Benzene solubles (also see asphalt fumes
and/or coal tar pitch volatiles)
-
NIOSH 5042
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5042.pdf)
Gravimetric
PTFE-2µm, preweighed
1.0-4.0
28-400
40
-
Protect sample from light.
Benzo (a) anthracene also see PAH scans
56-55-3
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Benzo (a) pyrene also see PAH scans
50-32-8
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Benzo (a) pyrene also see PAH scans
50-32-8
OSHA 58
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
58/org058.html)
HPLC
GFF-37mm
2
960
0.3
6
Protect from light; after sampling: fold filter, wipe inside of cassette with filter, and transfer filter to vial w/ teflon-lined cap.
Benzo (b) fluoranthene also see PAH
scans
205-99-2
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Benzo (e) pyrene also see PAH scans
192-97-2
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43))
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Store cold; do not exceed particulate loading of 2 mg on the filter.
Benzo (g,h,i) perylene also see PAH
scans
191-24-2
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
Benzo (k) fluoranthene also see PAH
scans
207-08-9
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
Benzoyl peroxide
94-30-0
NIOSH 5009
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5009.pdf)
HPLC
MCE
1.0-3.0
40-400
5
-
Benzyl alcohol
100-51-6
OSHA PV 2009
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv200
9/2009.html)
GC/FID
XAD-7 (SKC 226-95)
0.2
24
3
-
Benzyl chloride
100-44-7
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
6-50
3
1
Beryllium (air)
7440-41-7
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
1250-2000
0.02
7
This method cannot be used for beryllium oxide. Do not exceed 2 mg of total dust on filter.
Beryllium (air)
7440-41-7
NIOSH 7303-MS
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP/MS
MCE (or PVC-PW w/ total dust)
1.0-4.0
1250-2000
0.005
7
This method cannot be used for beryllium oxide.
Beryllium (air)
7440-41-7
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
ICP
MCE (or PVC-PW w/ total dust)
2
60-480
0.02
8
Welding fume method. Use this method when source is beryllium oxide.
Beryllium (air) Wipe samples
7440-41-7
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
ICP
Wipe kit
N/A
N/A
0.05
-
All wipe methods: Wipe kits are available from the laboratory. LOD may vary with type of media. For Be oxide, must use
OSHA ID-125G
EPA 6010
[View]
(http://www3.epa.gov/epawaste/hazard/testmethods/
sw846/pdfs/6010d.pdf)
ICP
Wipe kit
N/A
N/A
0.05
-
All wipe methods: Wipe kits are available from the laboratory. LOD may vary with type of media. For Be oxide, must use
OSHA ID-125G
Also see phenyl-diphenyl mixture (NIOSH 2013)
Beryllium (air) Wipe samples
7440-41-7
Biphenyl
92-52-4
NIOSH 2530
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2530.pdf)
GC/FID
Tenax (SKC 226-35-01)
0.01-0.5
3-10
1
-
Bis-(2-ethylhexyl) phthalate
117-81-7
OSHA 104
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org1
04/org104.html)
GC/FID
OVS-Tenax (SKC 226-56)
1
240
5
22
Bisphenol A
80-05-7
NIOSH P&CAM 333
[View]
(https://www.osha.gov/dts/sltc/methods/validated/10
18/1018.pdf)
HPLC
GFF-37mm
1.6
288
0.4
23
Bisphenol A diglycidyl ether
1675-54-3
NIOSH P&CAM 333
[View]
(https://www.osha.gov/dts/sltc/methods/validated/10
18/1018.pdf)
HPLC
GFF-37mm
1.6
288
0.5
23
Boron
7440-42-8
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
2
960
1
7
Do not exceed 2 mg of total dust on filter.
Bromine
7726-95-6
NIOSH 6011
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/6011.pdf)
IC
Silver filter-precleaned
0.3-1
16-360
10
24
Media requires special prep, so filters need to be ordered in advance.
Bromochloromethane
74-97-5
NIOSH 1003
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1003.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
5-8
5
1
Bromoform
75-25-2
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
10-70
10
1
GC/FID
CT-T4 (SKC 226-73 or ORBO351)
0.05
3
1
-
Store cold. This is the lab’s preferred method.
GC/FID
Anasorb CSC (2 tubes) (SKC 226-37 or -01)
0.01-0.5
3-25
0.5
-
Store frozen. Separate tubes after sampling. Lab does not routinely stock 226-37 tubes.
Butadiene, 1,3
106-99-0
OSHA 56
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
56/org056.html)
Butadiene, 1,3
106-99-0
NIOSH 1024
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1024.pdf)
Butane, n-
106-97-8
OSHA PV 2010
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv201
0/2010.html)
GC/FID
ORBO 91 (2 tubes)
0.05
3
5
12
Media: SKC does not have an equivalent tube available.
Butoxyethanol, 2
111-76-2
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.05
2-10
2
17
Butyl acetate, n-
123-86-4
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
3
1
Ship refrigerated.
Butyl acetate, s-
105-46-4
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
20
1
Ship refrigerated.
Butyl acetate, t-
540-88-5
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
20
1
Ship refrigerated.
Butyl acrylate
141-32-2
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
4
1
Store cold.
Butyl acrylate
141-32-2
OSHA PV 2011
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv201
1/2011.html)
GC/FID
CT-T4 (SKC 226-73)
0.05
12
2
-
Butyl alcohol, n-
71-36-3
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
2-10
3
1
Butyl alcohol, s-
78-92-2
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
2-10
3
1
Butyl alcohol, t-
75-65-0
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
2
1
Butyl carbitol
112-34-5
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
<0.2
<10
3
17
Butyl carbitol acetate
98100-70-0
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
<0.2
<10
3
17
GC/FID
CT (SKC 226-01)
0.01-0.05
2-10
2
17
GC/FID
CT (SKC 226-01)
0.01-0.2
15-30
4
1
Butyl cellosolve
111-76-2
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Butyl glycidyl ether, n-
2426-08-6
NIOSH 1616
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1616.pdf)
Butyl mercaptan, n-
109-79-5
NIOSH 2542
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2542.pdf)
GC/FPD
GFF-T6 (SKC 225-9007)
0.1-0.2
10-150
10
13
Protect samples from light.
Butylamine, n-
109-73-9
NIOSH 2010
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2010.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-1.0
3-30
1
9
Store cold.
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
13-2000
0.5
7
Do not exceed 2 mg of total dust on filter.
ICP
MCE (or PVC-PW w/ total dust)
2
30-480
0.5
8
Welding fume method.
Do not exceed 2 mg of total dust on filter.
Cadmium
7440-43-9
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
Cadmium
7440-43-9
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
Calcium
7440-70-2
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
5-200
10
7
Camphor
76-22-2
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
10-25
1
-
Caprolactam
105-60-2
OSHA PV 2012
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv201
2/2012.html)
HPLC
OVS-7 (SKC 226-57)
1
100
4
-
Captan
133-06-2
NIOSH 5601
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5601.pdf)
HPLC
OVS-2 (SKC 226-30-16)
0.1-1.0
30-480
4.8
11
Cold shipment not required, but freezer storage extends stability
Carbaryl
63-25-2
OSHA 63
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
63/org063.html)
HPLC
OVS-2 (SKC 226-30-16)
1
60
2
-
Cold shipment not required, but freezer storage extends stability
Carbaryl
63-25-2
NIOSH 5601
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5601.pdf)
HPLC
OVS-2 (SKC 226-30-16)
0.1-1.0
240-480
0.06
11
Cold shipment not required, but freezer storage extends stability
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5000.pdf)
Gravimetric
PVC –PW
1.0-2.0
30-570
50
-
PVC–PW
2
480-960
100
-
First test is gravimetric (as dust). If result >3.5 mg/m3 , client can choose to proceed to 2nd ashing procedure in the method.
Carbon black
1333-86-4
NIOSH 5000
Carbon black
1333-86-4
OSHA ID-196
[View]
Gravimetric /
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
Wet Chem
96/id196.html)
Carbon Disulfide
75-15-0
NIOSH 1600
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1600.pdf)
GC/FPD
Drier tube (SKC 226-44) / CT (SKC 226-01)
0.01-0.2
2-25
10
-
Store cold
Carbon tetrachloride
56-23-5
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
15-150
4
1
Store cold
Cellosolve
110-80-5
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.05
1-6
3
17
Store cold
Cellosolve acetate
111-15-9
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
4
1,17
Store cold
GC/ECD
OVS-2 (SKC 226-30-16)
1
480
0.3
-
GC/ECD
PUF
1.0-5.0
240-7200
0.05
29
Store cold, wrap in tinfoil
Chlordane
57-74-9
OSHA 67
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
67/org067.html)
Chlordane (alpha, gamma)
57-74-9
EPA TO-10A
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to10ar.pdf)
Chlorine
7782-50-5
NIOSH 6011
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/6011.pdf)
IC
Silver filter-precleaned
0.3-1
7-90
10
24
Media requires special prep, filters need to be ordered in advance
Chlorine
7782-50-5
OSHA ID-101
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
01/id101.html)
Wet Chem
0.1% Sulfamic acid (FBG)
1
15-240
20
-
Ship bottles in glass vials w/Teflon-lined cap
GC/FID
CT (SKC 226-01)
0.01-0.2
10-40
3
1
GC/FID
CT (SKC 226-01)
0.01-0.2
5-8
5
1
Chlorobenzene
108-90-7
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Chlorobromomethane
74-97-5
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Chloroform
67-66-3
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
15-50
4
1
Chlorpyrifos (Dursban)
2921-88-2
OSHA 62
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
62/org062.html)
GC/FPD
OVS-2 (SKC 226-30-16)
1
480
0.5
15
Chromic acid
1333-82-0
OSHA ID-215
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id2
15/id215.html)
Wet Chem
PVC
See notes
See notes
-
-
OSHA ID-215 is the preferred method, reported as hexavalent chromium, due to the lower RL and OSHA PEL.
Do not exceed 2 mg of total dust on filter.
Chromium
7440-47-3
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
5-1000
1
7
Chromium
7440-47-3
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
ICP
MCE (or PVC-PW w/ total dust)
2
30-480
1
8
Welding fume method.
Chromium, hexavalent (Cr+6) Air
18540-29-9
OSHA ID-215
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id2
15/id215.html)
IC
PVC
2
960
0.01
(0.035 for
paint
prep)
-
Use this method for OSHA PEL. If sample collected from a paint operation (spray or grinding), client must notify the lab on
COC--special sample prep required! Welding must be analyzed w/in 8 days of collection; plating w/in 6 days.
Chromium, hexavalent (Cr+6) Air Wipe
18540-29-9
OSHA ID-215
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id2
15/id215.html)
IC
Wipe (quartz or PVC filter; quartz is more durable)
-
-
0.01
-
Wipe with dry filter (unless sampling a plating operation, then see method). After wiping, place wipe in vial and ship to lab.
OSHA Protocol W4001 has details.
Chrysene also see PAH scans
218-01-9
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Chrysene also see PAH scans
218-01-9
OSHA 58
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
58/org058.html)
HPLC
GFF-37mm
2
960
0.3
6
Protect from light; after sampling: fold filter, wipe inside of cassette with filter, and transfer filter to vial w/ teflon-lined cap.
Coal Tar Pitch Volatiles (CTPV) also see
benzene solubles and/or asphalt fumes
65996-93-2
OSHA 58
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
58/org058.html)
Wet Chem
GFF-37mm
2
960
40
6
Protect from light; after sampling: fold filter, wipe inside of cassette with filter, and transfer filter to vial w/ teflon-lined cap.
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
25-2000
1
7
Do not exceed 2 mg of total dust on filter.
ICP
MCE (or PVC-PW w/ total dust)
2
30-480
1
8
Welding fume method.
Cobalt
7440-48-4
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
Cobalt
7440-48-4
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
ICP
MCE
2
30-480
10
38
PVC can only be used for soluble cobalt. Special instructions for soluble – see Section 2.2.6 of method for details. This
method only compatible with tungsten.
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
5-1000
1
7
Do not exceed 2 mg of total dust on filter.
Cobalt
7440-48-4
OSHA ID-213
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id2
13/id213.html)
Copper
7440-50-8
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
Copper
7440-50-8
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
ICP
MCE (or PVC-PW w/ total dust)
2
30-480
1
8
Welding fume method.
Cresol (o,m,p)
1319-77-3
NIOSH 2546
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2546.pdf)
GC/FID
XAD-7 (SKC 226-95)
0.01-0.1
1-24
6
25
Each isomer is reported individually, and a total result is also available.
Cresols, total
1319-77-3
OSHA 32
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
32/org032.pdf)
HPLC
XAD-7 (SKC 226-95)
0.1
24
6
26
The result is reported as the total of the sum of the 3 isomers.
Crotonaldehyde also see Aldehyde scans
123-73-9
EPA TO-11
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to11ar.pdf)
HPLC
SG-T2 (SKC 226-119)
0.1-1.5
1-15
0.5
5
Store cold
Cumene
98-82-8
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-30
2
1
Cyanide (gaseous) also see hydrogen
cyanide
74-90-8
NIOSH 7904
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7904.pdf)
Wet Chem
PVC/ 0.1N KOH (FGB)
0.5-1 1
1-180
3
28
Ship solution in glass vials w/ Teflon-lined caps. Gaseous portion of cyanide is obtained from the impinger.
Cyanide (gaseous) also see hydrogen
cyanide
74-90-8
OSHA ID-120
[View]
(https://www.osha.gov/dts/sltc/methods/validated/id1
20/id120.html)
Wet Chem
MCE/ 0.1N NaOH (Imp)
0.5-1 1
90-120
3
27
Ship solution in glass vials w/ Teflon-lined caps. Gaseous portion of cyanide is obtained from the impinger.
Cyanide (particulate)
57-12-5
NIOSH 7904
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7904.pdf)
Wet Chem
PVC/ 0.1N KOH (FGB)
0.5-1
1-180
3
28
Ship solution in glass vials w/ Teflon-lined caps. Particulate portion of cyanide is obtained from the filter, which must be
analyzed within 5 days of sample collection.
Cyanide (particulate)
57-12-5
OSHA ID-120
[View]
(https://www.osha.gov/dts/sltc/methods/validated/id1
20/id120.html)
Wet Chem
MCE/ 0.1N NAOH (Imp)
1
90-120
3
27
Ship solution in glass vials w/ Teflon-lined caps. Particulate portion of cyanide is obtained from the filter, which must be
analyzed within 5 days of sample collection.
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
2.5-5
2
1
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
4
1
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
4
1
Cyclohexane
110-82-7
Cyclohexanol
108-93-0
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Cyclohexanone
108-94-1
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
5-7
2
1
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-0.2
3-96
1
9
Cyclohexene
110-83-8
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Cyclohexylamine
108-91-8
NIOSH 2010
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2010.pdf)
Store cold. This is the lab’s preferred method.
Cyclohexylamine
108-91-8
OSHA PV 2016
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv201
6/2016.html)
GC/FID
XAD-7 treated (H2SO4) (SKC 226-98)
0.1-0.2
10-20
2
40
Store samples cold if not shipped to lab quickly.
DDE, 4,4'also see Pesticide scans
72-55-9
EPA TO-10A
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to10ar.pdf)
GC/ECD
PUF
1.0-5.0
240-7200
0.05
29
Store cold; wrap in foil for shipment; lab must extract sample within 7 days of sampling. Lab does not stock PUF media. See
method for more details.
DDT, 4,4'also see Pesticide scans
50-29-3
EPA TO-10A
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to10ar.pdf)
GC/ECD
PUF
1.0-5.0
240-7200
0.05
29
Store cold; wrap in foil for shipment; lab must extract sample within 7 days of sampling. Lab does not stock PUF media. See
method for more details.
OSHA 104
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org1
04/org104.html)
GC/FID
OVS-Tenax (SKC 226-56)
1
240
10
22
Di-n-octyl phthalate
117-84-0
Diacetone alcohol
123-42-2
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
10
1
Store cold.
Diacetyl
431-03-8
OSHA 1013
[View]
(https://www.osha.gov/dts/sltc/methods/validated/10
13/1013.pdf)
GC/FID
SG – washed & baked (226-183: set of 2 tubes)
0.05 (0.2 for STEL)
9 (3 for STEL)
1
42
Protect samples from light during and after sampling, using tube holders, aluminum foil, or other means. Store cold.
Diacetyl
431-03-8
OSHA 1012
[View]
(https://www.osha.gov/dts/sltc/methods/validated/10
12/1012.pdf)
GC/ECD
SG – washed & baked (226-183: set of 2 tubes)
0.05 (0.2 for STEL)
9 (3 for STEL)
0.05
41
Protect samples from light during and after sampling, using tube holders, aluminum foil, or other means. Store cold.
Diazinon
333-41-5
NIOSH 5600
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5600.pdf)
GC/FPD
OVS-2 (SKC 226-30-16)
0.2-1.0
12-240
0.5
15
Diazinon
333-41-5
OSHA 62
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
62/org062.html)
GC/FPD
OVS-2 (SKC 226-30-16)
1
GC/FID
CT (SKC 226-01)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
GC/ECD
GC/FID
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Dibasic esters mix of dimethyl adipate,
dimethyl glutarate, and dimethyl succinate
-
OSHA PV 2019/2020/2021
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv201
9/2019.html)
Dibenzo (a,h)anthracene also see PAH
scans
53-70-3
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
1,2-Dibromo3-chloropropane
96-12-8
In-house method
Dibutyl phthalate
84-74-2
OSHA 104
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org1
04/org104.html)
Dichloroethane, 1,1
75-34-3
OSHA 7
480
0.5
15
0.2
20
10
36
Store cold. Analysis should be performed within 1 wk. of collection, so schedule with laboratory.
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Anasorb 747 (SKC 226-81A)
≤0.2
≤10
0.005
-
OVS-Tenax (SKC 226-56)
1
240
10
22
GC/FID
CT (SKC 226-01)
0.01-0.2
10-15
3
1
GC/FID
CT (SKC 226-01)
0.01-0.2
10-15
3
1
GC/FID
CT (SKC 226-01)
0.01-0.2
2-7
3
1
Dichloroethane, 1,2
107-06-2
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Dichloroethylene, 1,1
75-35-4
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
≤0.2
≤10
3
1
GC/FPD
OVS-2 (SKC 226-30-16)
1
480
0.5
15
Dichloropropane, 1,2(also called
propylene dichloride)
78-87-5
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Dichlorvos (DDVP)
62-73-7
OSHA 62
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
62/org062.html)
Diesel fuel
68334-30-5
NIOSH 1550
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1550.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.2-20
20
1
If available, submit bulk reference material in separate packaging.
Diesel particulate
7440-44-0
NIOSH 5040
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5040.pdf)
Thermo-optical
Quartz (precleaned) or SKC DPM cassette
1.0-4.0
106-4300
4 (total)
-
See method for various sampling scenarios; at least one field blank is required. SKC DPM often needed for monitoring in
mines.
Diethanolamine
111-42-2
OSHA PV 2018
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv201
8/2018.html)
HPLC
XAD2-T5 (SKC 226-30-18)
0.1
10
10
37
Method similar to OSHA 60 or NIOSH 2540.
Diethyl ether
60-29-7
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.25-3
2
1
Diethyl phthalate
84-66-2
OSHA 104
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org1
04/org104.html)
GC/FID
OVS-Tenax (SKC 226-56)
1
240
10
22
Diethylamine
109-89-7
NIOSH 2010
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2010.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-1.0
3-30
2
10
GC/FID
OVS-7 (SKC 226-57)
0.5-2.0
5-60
20
16
HPLC
XAD2-T5 (SKC 226-30-18)
0.01-0.1
1-20
10
-
Diethylene glycol
111-46-6
NIOSH 5523
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5523.pdf)
Diethylenetriamine
111-40-0
NIOSH 2540
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2540-2.pdf)
Diethylenetriamine
111-40-0
OSHA 60
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
60/org060.html)
HPLC
XAD2-T5 (SKC 226-30-18)
0.1
10
10
-
Diethylethanolamine
100-37-8
NIOSH 2007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2007.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-0.2
4-24
1
-
Diisobutyl ketone
108-83-8
NIOSH 1300
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1300.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
3
1
Diisopropylamine
108-18-9
NIOSH 2010
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2010.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-1.0
3-30
5
9
Dimethyl acetamide
127-19-5
NIOSH 2004
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2004.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-1.0
15-80
1
-
Dimethyl adipate also see dibasic esters
627-93-0
OSHA PV 2019
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv201
9/2019.html)
GC/FID
CT (SKC 226-01)
0.2
20
3
36
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2010.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-1.0
3-30
1
9
GC/FPD
CT (SKC 226-01)
≤0.1
≤10
1
30
Dimethyl-cyclohexylamine
98-94-2
NIOSH 2010
Dimethyl disulfide
624-92-0
In-house method
Dimethyl ethanolamine
108-01-0
NIOSH 2007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2007.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-0.2
4-24
1
-
Dimethyl ethylamine
598-56-1
NIOSH 2007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2007.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-1.0
3-30
1
-
Dimethyl formamide
68-12-2
NIOSH 2004
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2004.pdf)
GC/FID
SG (SKC 226-10 or 226-15)
0.01-1.0
15-80
5
-
Dimethyl formamide
68-12-2
OSHA 66
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
66/org066.html)
GC/NPD
CT (SKC 226-01)
0.2
10
1
-
GC/FID
CT (SKC 226-01)
0.2
20
3
36
GC/FID
OVS-Tenax (SKC 226-56)
1
240
10
22
Dimethyl glutarate also see dibasic esters
1119-40-0
OSHA PV 2020
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv202
0/2020.html)
Dimethyl phthalate
131-11-3
OSHA 104
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org1
04/org104.html)
Dimethyl succinate also see dibasic esters
106-65-0
OSHA PV 2021
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv202
1/2021.html)
GC/FID
CT (SKC 226-01)
0.2
20
3
36
Dimethyl sulfate
77-78-1
NIOSH 2524
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2524.pdf)
GC/FPD
Porapak P (SKC 226-114)
0.01-0.2
0.25-12
0.5
-
Dimethyl sulfide
75-18-3
In-house method
Dimethyl-ptoluidine, n,n-
99-97-8
NIOSH 2002
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2002.pdf)
GC/FPD
CT (SKC 226-01)
≤0.1
≤5.0
1
30
GC/FID
SG (SKC 226-10 or 226-15)
0.02-1.0
5-30
10
18
Store cold.
Keep samples frozen. See method if long-term (more than 2 wks) storage required.
Store cold.
Store cold. Recommend analyzing within 2 wks.
Keep samples frozen. See method if long-term storage (more than 2 wks) required.
Store cold. Analyze within 2 wks.
Store cold. Analysis should be performed within 1 wk. of collection, so schedule with laboratory.
Dimethylamine
124-40-3
NIOSH 2010
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2010.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-1.0
3-30
3
10
Dimethylaniline
121-69-7
NIOSH 2002
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2002.pdf)
GC/FID
SG (SKC 226-10 or 226-15)
0.02-1.0
3-30
5
18
Dioxane, 1,4
123-91-1
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.5-15
3
1
17
Dowanol DPM
34590-94-8
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
≤0.1
≤10
2
Dowanol PM
107-98-2
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
≤0.1
≤10
2
17
Dowanol PMA
108-65-6
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
≤0.1
≤10
2
1, 17
Store cold.
Dust (see particulate)
-
NIOSH 0500/0600
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/0500.pdf)
Gravimetric
-
-
-
-
-
Sampling depends on whether dust is respirable or total.
Elemental carbon (diesel particulate)
-
NIOSH 5040
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5040.pdf)
Therm-optical
Quartz (precleaned) or SKC DPM
1.0-4.0
106-4300
4 (total)
-
See method for various sampling scenarios; at least one field blank is required. Note the RL for elemental carbon is 2 µg.
Endrin
72-20-8
EPA TO-10A
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to10ar.pdf)
GC/ECD
PUF
1.0-5.0
240-7200
0.1
29
Store cold; wrap in foil for shipment; lab must extract sample within 7 days of sampling. Lab does not stock PUF media. See
method for more details.
Epichlorohydrin
106-89-8
NIOSH 1010
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1010.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
2-30
5
1
Ethanolamine (also called
monoethanolamine)
141-43-5
NIOSH 2007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2007.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-0.2
4-24
1
-
Ethyl acetate
141-78-6
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
3
1
Ethyl acrylate
140-88-5
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
5
1
Ethyl acrylate
140-88-5
OSHA 92
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
92/org092.html)
GC/FID
CT-T4 (SKC 226-73 or ORBO 351)
0.05
12
2
-
Cold shipment not required, but suggested
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.05
0.1-1
5
1
Store cold
GC/FID
CT (SKC 226-01)
0.01-0.2
0.5-4
10
-
Ethyl alcohol
64-17-5
OSHA 7
Ethyl bromide
74-96-4
NIOSH 1011
Ethyl carbitol
111-90-0
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.05
1-10
3
17
Ethyl cellosolve
96231-36-6
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.05
1-10
3
17
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
3
1,17
HPLC
XAD7-T7 (SKC 226-98)
0.1
12
3
-
Ethyl cellosolve acetate
111-15-9
OSHA 7
Ethyl cyanoacrylate, 2
7085-85-0
OSHA 55
Ethyl ether
60-29-7
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.25-3
2
1
Ethyl-3-ethoxypropionate
763-69-9
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
≤0.1
≤10
2
1
GC/FPD
GFF-T6 (SKC 225-9007)
0.1-0.2
10-150
4
13
GC/FPD
OVS-2 (SKC 226-30-16)
1
480
0.5
15
Keep samples frozen. See method if long-term storage (more than 2 wks) required.
Store cold.
Store cold.
Ethyl mercaptan
75-08-1
NIOSH 2542
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2542.pdf)
Ethyl parathion
56-38-2
OSHA 62
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
62/org062.html)
Ethyl silicate
78-10-4
NIOSH S-264
[View](http://www.cdc.gov/niosh/pdfs/s264.pdf)
GC/FID
XAD-2 (SKC 226-30-04)
0.05
≤9
3
-
Ethylamine
75-04-7
NIOSH 2007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2007.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-1.0
3-30
2
10
Store cold.
GC/FID
CT (SKC 226-01)
0.01-0.2
1-24
2
1
OSHA 1002 is written for passive badges (SKC 575002). Lab will cite equivalent analytical method (OSHA 7).
GC/FID
CT (SKC 226-01)
0.02-0.2
0.1-25
5
-
Store cold.
Ethylbenzene
100-41-4
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Ethylene dibromide
106-93-4
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Protect from light.
Ethylene glycol
107-21-1
NIOSH 5523
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5523.pdf)
GC/FID
OVS-7 (SKC 226-57)
0.5-2.0
5-60
20
16
Store cold.
Ethylene oxide
75-21-8
OSHA 1010
[View]
(https://www.osha.gov/dts/sltc/methods/mdt/mdt101
0/1010.pdf)
GC/ECD
CT-T8 (SKC 226-178)
0.05
0.75-12
0.6
-
Store cold.
GC/ECD
3M 3551 badge
NA
480 min.
2
-
HPLC
XAD2-T5 (SKC 226-30-18)
0.01-0.1
1-20
10
37
Ethylene oxide
75-21-8
OSHA 49
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
49/org049.pdf)
Ethylenediamine
107-15-3
NIOSH 2540
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2540-2.pdf)
Ethylenediamine
107-15-3
OSHA 60
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
60/org060.html)
HPLC
XAD2-T5 (SKC 226-30-18)
0.1
10
10
37
Ethylhexyl acrylate, 2
103-11-7
OSHA PV2026
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv202
6/2026.html)
GC/FID
CT-T4 (SKC 226-73 or ORBO 351)
0.1
12
2
-
NIOSH 7400B
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7400.pdf)
PCM
MCE-25mm
0.5-16
400-5000
5 f/mm2
21
Sample open-faced.
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Fibrous glass also see other fiber options
Fluoranthene also see PAH scans
206-44-0
Store cold.
Fluorene also see PAH scans
86-73-7
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Fluoride (gaseous)
7664-39-3
NIOSH 7902
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7902.pdf)
Wet Chem
MCE / Cellulose pad-T9
1.0-2.0
25-800
50
31
Can be collected with particulate fluoride (below)
Fluoride (gaseous)
7664-39-3
OSHA ID-110
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
10/id110.pdf)
Wet Chem
MCE / Cellulose pad-T9
1.5
22.5-90.0
130
32
Can be collected with particulate fluoride (below)
Can be collected with gaseous fluoride (above)
Fluoride (particulate)
16984-48-8
NIOSH 7902
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7902.pdf)
Wet Chem
MCEF (treated cellulose pad optional)
1.0-2.0
25-800
50
31
Fluoride (particulate)
16984-48-8
OSHA ID-110
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
10/id110.pdf)
Wet Chem
MCEF (treated cellulose pad optional)
1.5
22.5-90.0
130
32
Can be collected with gaseous fluoride (above)
Formaldehyde also see Aldehyde scans
50-00-0
NIOSH 2016
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2016.pdf)
HPLC
SG-T2 (SKC 226-119)
0.03-1.5
1-15
0.1
5
Store cold. Ozone is a possible interference (see method).
Formaldehyde also see Aldehyde scans
50-00-0
EPA TO-11
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to11ar.pdf)
HPLC
SG-T2 (SKC 226-119)
0.03-1.5
1-15
0.1
5
Store cold; flow rate/ volume are from NIOSH 2016. See EPA method for more information on special sampling situations.
Formaldehyde also see Aldehyde scans
50-00-0
OSHA 52
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
52/org052.html)
GC/NPD
XAD-2 (T1); for TWA use SKC 226-117 or ORBO 24. For STEL use SKC
226-54
0.1 0.2
24 3
1 0.5
19
Formaldehyde also see Aldehyde scans
50-00-0
NIOSH 3500
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/3500.pdf)
Wet Chem
NaHSO3 (Imp)
0.2-1.0
1-100
20
-
Formaldehyde also see Aldehyde scans
50-00-0
OSHA ID-205
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id2
05/id205.html)
Wet Chem
3M 3721 badge
NA
480 min.
1
-
Field blank is normally required for blank correction. Follow badge maker’s instructions.
HPLC
SKC UMEx 100 or AT 571 badges
NA
15-240 min.
0.1 (0.05
for STEL)
-
Store cold before and after sampling. Do not use badges if 1) source is formalin, or 2) rel. humidity <10%. Ozone is possible
interference (see method). Follow badge maker’s instructions. Specify on CoC if sample is a STEL.
Wet Chem
SKC 526 series badges
NA
STEL, PEL, and IAQ
options
Formaldehyde also see Aldehyde scans
50-00-0
OSHA 1007
[View]
(https://www.osha.gov/dts/sltc/methods/mdt/mdt100
7/1007.pdf)
Formaldehyde also see Aldehyde scans
50-00-0
NIOSH 3500
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/3500.pdf)
Ship samples in polyethylene bottles; add PTFE (1µm) filter to train in dusty environments.
Follow badge maker’s instructions. Badges to be obtained directly from SKC; lab does not normally stock the badges.
Formic Acid
64-18-6
NIOSH 2011
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2011.pdf)
IC
SG-T12 (SKC 226-10-03 or ORBO 53)
0.05-0.2
1-24
6
35
Freon 113
76-13-1
NIOSH 1006
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1006.pdf)
GC/FID
CT (SKC 226-01) (2 tubes)
0.01-0.05
0.3-7
4
1
Store cold; separate tubes after sampling.
Freon 114
76-14-2
NIOSH 1018
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1018.pdf)
GC/FID
CT (SKC 226-01) (2 tubes)
0.01-0.05
1-4
5
-
Store cold; separate tubes after sampling.
Freon 141B
1717-00-6
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT SKC 226-01 (2 tubes)
≤0.05
≤1.0
7
1
Store cold; separate tubes after sampling.
GC/FID
CT SKC 226-01 (2 tubes)
0.01-0.05
1-4
10
-
Store cold; separate tubes after sampling.
GC/FID
Anasorb 747 (SKC 226-81A)
1
180
4
-
Freon 22
75-46-6
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Furfural
98-01-1
OSHA 72
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
72/org072.html)
Furfuryl alcohol
98-00-0
NIOSH 2505
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2505.pdf)
GC/FID
Porapak Q (SKC 226-115)
0.01-0.05
3-25
3
-
gamma-BHC
58-89-9
EPA TO-10A
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to10ar.pdf)
GC/ECD
PUF
1.0-5.0
240-7200
0.1
29
Store cold; Protect from light
Glutaraldehyde
111-30-8
NIOSH 2532
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2532.pdf)
HPLC
SG-T2 (SKC 226-119)
0.05-0.5
1-30
0.5
5
Glutaraldehyde
111-30-8
OSHA 64
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
64/org064.html)
HPLC
GFF-T10 (SKC 225-9003)
1
15
0.2
-
Store cold; Protect from light; Two filters are in one cassette
Store cold.
Halothane
151-67-7
OSHA 103
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org1
03/org103.html)
GC/FID
Anasorb CMS or 747 (SKC 226-121 or -81A)
0.05
12
10
35
Heptane
142-82-5
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.1-0.2
4
2
1
Hexachlorobutadiene
87-68-3
NIOSH 2543
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2534.pdf)
GC/ECD
XAD-2 (SKC 226-30-04)
0.05-0.2
1-100
0.005
-
Hexachloroethane
67-72-1
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
10-70
3
1
Hexaldehyde also see Aldehyde scans
9012-63-9
EPA TO-11
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to11ar.pdf)
HPLC
SG-T2 (SKC 226-119)
0.1-1.5
1-15
0.5
5
Store cold; flow rate/ volume from NIOSH 2016.
Hexamethylene diisocyanate (HDI) see
isocyanate scan also
822-06-0
NIOSH 5521
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5521.pdf)
HPLC
Pip/Tol soln (Imp)
1
5-500
0.2
33
Ship samples in glass vials w/ teflon-lined caps.
Hexamethylene diisocyanate (HDI) see
isocyanate scan also
822-06-0
OSHA 42
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
42/org042.html)
HPLC
GFF-T11 (SKC 225-9002)
1
15-240
0.2
4
Store cold; sample open-faced; protect from light.
Hexamethylenediamine
124-09-4
NIOSH 2007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2007.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-1
3-30
2
-
Store cold.
GC/FID
CT (SKC 226-01)
0.01-0.2
4
2
1
GC/FID
CT (SKC 226-01)
0.01-0.05
1-10
2
17
Store cold; protect from light.
Hexane, n-
110-54-3
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Hexyl cellosolve
32167-24-1
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Hexylene glycol
107-41-5
In-house method
GC/FID
CT (SKC 226-01)
0.2
3
3
17
Hydrazine
301-01-2
OSHA 108
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org1
08/org108.html)
HPLC
GFF-T3 (SKC 225-9004)
1
240 (15 for STEL)
0.1
-
Store cold. Can also use SKC 225-9012
IC
SG -T19 (SKC 226-55)
1
≤5.0
0.2
-
Store cold.
IC
SG-T12 (SKC 226-10-03 OR ORBO 53)
0.2-0.5
3-100
5
3
Hydrazoic acid
7782-79-8
OSHA ID-211
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id2
11/id211.html)
Hydrobromic acid also see acid scan
10035-10-6
NIOSH 7903
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7903.pdf)
Hydrocarbons, total
NIOSH 1550
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1550.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.2-20
10
1
Hydrochloric acid also see acid scan
7647-01-0
NIOSH 7903
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7903.pdf)
IC
SG-T12 (SKC 226-10-03 OR ORBO 53)
0.2-0.5
3-100
3
3
Hydrofluoric acid also see acid scan
7664-39-3
NIOSH 7903
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7903.pdf)
IC
SG-T12 (SKC 226-10-03 OR ORBO 53)
0.2-0.5
3-100
2
3
Hydrogen cyanide also see cyanide
74-90-8
NIOSH 6010
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/6010.pdf)
Wet Chem
Soda lime (SKC 226-28)
0.05-0.2
2-90
1
-
Hydrogen peroxide
7722-84-1
OSHA ID-006
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id0
06/hydrogen_peroxide.html)
Wet Chem
TiOSO4 (FGB)
0.5
100
40
-
Ship samples in plastic or glass bottles.
Hydrogen sulfide
7783-06-4
NIOSH 6013
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/6013.pdf)
IC
PTFE (0.45) / ORBO 34
0.1-1.5
5-40
20
-
A field blank is required. Analysis of the filter for sulfate is optional and will incur an additional cost (see sulfur oxides by
NIOSH 6004). See method for more details.
Hydrogen sulfide
7783-06-4
OSHA ID-1008
[View]
(https://www.osha.gov/dts/sltc/methods/validated/10
08/1008.pdf)
IC
SG-treated (AgNO3) & treated GFF (SKC 226-177)
0.05-0.5
5-12
10
39
Store cold. Use media from the same lot for each sample batch.
Hydrogenated MDI (H2MDI)
88504-76-1
OSHA PV2092
[View]
(https://www.osha.gov/dts/sltc/methods/partial/tpv2092-01-8804-ch/t-pv2092-01-8804-ch.html)
HPLC
GFF-T11 (SKC 225-9002)
1
15
0.4
4
Store cold; sample open-faced; protect from light. Similar to OSHA 42.
Hydroquinone
123-31-9
NIOSH 5004
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5004.pdf)
HPLC
MCE
1.0-3.0
30-180
10
-
Transfer filter to a glass bottle containing 10 mL of 1% acetic acid.
Hydroquinone
123-31-9
OSHA PV 2094
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv209
4/pv2094.html)
HPLC
XAD7-T7 (SKC 226-98)
0.2
20
0.5
-
Indeno (1,2,3-cd) pyrene also see PAH
scans
193-39-5
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
NIOSH 7903
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7903.pdf)
IC
SG-T12 (SKC 226-10-03 OR ORBO 53)
0.2-0.5
3-100
Varies
3
Inorganic Acid Scan also see scans
See SKC’s instructions for tubes before sampling.
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Iodine
7553-56-2
OSHA ID-212
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id2
12/id212.html)
Wet Chem
Carbon bead-T (SKC 226-80)
0.5
≤5.0
5
-
Iron
7439-89-6
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1-4
5-100
1
7
Do not exceed 2 mg of total dust on filter.
Welding fume method.
Iron
7439-89-6
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
ICP
MCE (or PVC-PW w/ total dust)
2
30-480
1
8
Isoamyl alcohol
123-51-3
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
4
1
Isobutyl acetate
110-19-0
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
3
1
Isobutyl alcohol
78-83-1
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
2-10
4
1
Isophorone
78-59-1
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
Anasorb 747 (SKC 226-81A)
0.01-1.0
2-25
3
-
Store cold.
Isophorone diisocyanate (IPDI)
4098-71-9
OSHA 42
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
42/org042.html)
HPLC
GFF-T11 (SKC 225-9002)
1
15
0.4
4
Store cold; sample open-faced; protect from light.
Isopropyl acetate
108-21-4
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
≤0.2
≤9.0
2
1
Isopropyl alcohol
67-63-0
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.2-10
4
1
OSHA 1009 is written for passive badges (SKC 575002 and SKC 3520). Lab will cite equivalent analytical method (OSHA 7).
Store cold.
Isopropyl ether
108-20-3
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.05
0.1-3.0
2
1
Isopropylamine
75-31-0
NIOSH 2007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2007.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.2
3-96
1
9
Store cold.
GC/FID
CT (SKC 226-01)
0.01-0.2
0.2-20
40
1
If available, submit bulk reference material in separate packaging.
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
5-1000
1
7
Not in the standard, 28-metal scan.
Do not exceed 2 mg of total dust on filter.
Kerosene
8008-20-6
NIOSH 1550
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1550.pdf)
Lanthanum
7439-91-0
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
Lead Air samples
7439-92-1
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
50-2000
1
7
Lead Air samples
7439-92-1
NIOSH 7303-MS
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP/MS
MCE (or PVC-PW w/ total dust)
1.0-4.0
50-2000
0.05
7
Lead Air samples
7439-92-1
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
ICP
MCE (or PVC-PW w/ total dust)
2
30-480
1
8
Welding fume method.
Lead Wipe samples
7439-92-1
EPA 6010
[View]
(http://www3.epa.gov/epawaste/hazard/testmethods/ ICP ICP/MS
sw846/pdfs/6010d.pdf)
Wipe kit
N/A
N/A
10
-
All wipe methods: Wipe kits are available from the laboratory.
Lead Paint chips
7439-92-1
EPA 6010
[View]
(http://www3.epa.gov/epawaste/hazard/testmethods/
sw846/pdfs/6010d.pdf)
ICP
Place sample in vial or ziplock baggie
-
-
Varies
-
LOD varies with amount of sample.
Limonene, d-
5989-27-5
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.2
10
3
1
Store cold.
Lithium
7439-93-2
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
100-2000
1
7
Do not exceed 2 mg of total dust on filter.
Magnesium
7439-95-4
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
5-67
10
7
Do not exceed 2 mg of total dust on filter.
GC/FPD
OVS-2 (SKC 226-30-16)
1
60
0.5
15
HPLC
XAD-2 (T14) / XAD-2 (SKC 226-30-07 and -30)
0.1
20
0.5
-
Malathion
121-75-5
OSHA 62
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
62/org062.html)
Maleic anhydride
108-31-6
OSHA 25
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
25/org025.html)
Store cold; protect from light.
Maleic anhydride
108-31-6
OSHA 86
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
86/org086.html)
HPLC
GFF (treated with veratrylamine) (SKC 225-9021)
0.5
60
2
-
Isocyanates, acid chlorides, and anhydrides (other than maleic) may reduce media capacity.
Manganese
7439-96-5
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
5-200
1
7
Do not exceed 2 mg of total dust on filter.
Manganese
7439-96-5
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
ICP
MCE (or PVC-PW w/ total dust)
2
30-480
1
8
Welding fume method.
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/6009.pdf)
Mercury (vapor)
7439-97-6
NIOSH 6009
AA Cold Vapor
Hopcalite (SKC 226-17-1A)
0.15-0.25
2-100
0.05
-
SKC passive method also available;
Mercury (vapor)
7439-97-6
OSHA ID-140
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1 AA Cold Vapor
40/id140.pdf)
Hopcalite (SKC 226-17-1A)
0.2
3-100
0.1
-
SKC passive method also available;
Mercury (particulate)
7439-97-6
OSHA ID-145F
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1 AA Cold Vapor
45/id145.html)
MCE
2
≤10
0.1
-
Metal-working fluids (MWF) method
includes particulate analysis
NIOSH 5524
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5524.pdf)
Gravimetric
PTFE-2 µm, preweighed and precleaned
2
960
100
-
Store cold. Lab must analyze w/in 2 wks. of sample collection. Also called oil mist.
Metals-Welding Scan 13 metals
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-3.0
250-1000
Varies
8
Welding fume method.
Metals Scans 28 metals
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-3.0
250-1000
Varies
7
Do not exceed 2 mg of total dust on filter.
Metals Scans Wipe Samples
EPA 6010
[View]
(http://www3.epa.gov/epawaste/hazard/testmethods/
sw846/pdfs/6010d.pdf)
ICP
Wipe kit
N/A
N/A
Varies
-
EPA 6010 is equivalent to NIOSH 7300.
Methacrylic acid
79-41-4
OSHA PV 2005
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv200
5/2005.html)
HPLC
Anasorb 708 (2 tubes) (SKC 226-30-08)
0.1
24
2
-
Store cold; protect samples from light; separate tubes after sampling
Methanol
67-56-1
NIOSH 2000
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2000.pdf)
GC/FID
SG (SKC 226-10 or 226-15)
0.02-0.2
1-5
4
-
Store cold. If concerned about breakthrough, sample w/ 2 tubes in series and separate after sampling.
Methanol
67-56-1
OSHA 91
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
91/org091.html)
GC/FID
Anasorb 747 (2 tubes) (SKC 226-83)
0.05
3-5
20
-
Store cold. Separate tubes after sampling. Volumes: 3L if rel. humidity (RH) <50%; 5L if RH >50% (at 25 °C)
Methyl acrylate
96-33-3
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
≤0.2
≤5.0
10
1
Methyl acrylate
96-33-3
OSHA 92
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
92/org092.html)
GC/FID
CT-T4 (SKC 226-73 or ORBO 351)
0.05
12
2
-
Methyl amyl ketone
110-43-0
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-5
3
-
Methyl aniline
100-61-8
NIOSH 2002
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2002.pdf)
GC/FID
SG (SKC 226-10 or 226-15)
0.02-0.2
5-30
5
18
Methyl bromide
74-83-9
OSHA PV 2040
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv204
0/2040.html)
GC/FID
Anasorb 747 (2 tubes) (SKC 226-83)
0.05-0.2
≤3
2
-
Cold shipment not required, but storage at reduced temperature suggested.
Store cold. Separate tubes after sampling. Analyze w/in 2 wks. of sample collection.
Methyl butyl ketone
591-78-6
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
3
1
Methyl cellosolve
109-86-4
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.05
42014
3
17
Methyl cellosolve acetate
110-49-6
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
≤0.2
≤20
3
17
Methyl chloride
74-87-3
NIOSH 1001
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1001.pdf)
GC/FID
CT SKC 226-01 (2 tubes)
0.01-0.1
0.4-3
2
1
Store cold; separate tubes after sampling.
OSHA 1004 is written for passive badges (SKC 575002 or 3M 3520). Lab will cite equivalent analytical method (OSHA 7).
Methyl ethyl ketone (MEK)
78-93-3
NIOSH 2555
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2555.pdf)
GC/FID
Anasorb 747 (SKC 226-81A or ORBO 90)
0.01-0.2
1.0-12
3
-
Methyl ethyl ketone (MEK)
78-93-3
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
≤0.2
≤12
2
1
Methyl formate
107-31-3
OSHA PV 2041
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv204
1/2041.html)
GC/FID
Anasorb 747 (SKC 226-83)
0.05
3
5
-
Methyl iodide
74-88-4
NIOSH 1014
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1014.pdf)
GC/FID
CT (SKC 226-01)
0.01-1.0
15-50
10
-
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
3
1
GC/FID
CT (SKC 226-01)
0.01-0.2
1-25
4
-
Methyl isoamyl ketone
110-12-3
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Methyl isobutyl carbinol
108-11-2
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Must store samples cold, schedule analysis in advance with lab, and ship quickly to lab (method shows approx. 18% loss after
7 days of cold storage).
Methyl isobutyl ketone (MIBK)
108-10-1
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
3
1
OSHA 1004 is written for passive badges (SKC 575002 or 3M 3520). Lab will cite equivalent analytical method (OSHA 7).
Methyl mercaptan
74-93-1
NIOSH 2542
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2542.pdf)
GC/FPD
GFF-T6 (SKC 225-9007)
0.1-0.2
10-150
4
13
Protect from light.
Methyl methacrylate
80-62-6
NIOSH 2537
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2537.pdf)
GC/FID
XAD-2 (SKC 226-30-06)
0.01-0.05
1-8
5
-
Methyl methacrylate
80-62-6
OSHA 94
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
94/org094.html)
GC/FID
CT-T4 (SKC 226-73)
0.05
3
2
-
Methyl parathion
298-00-0
OSHA 62
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
62/org062.html)
GC/FPD
OVS-2 (SKC 226-30-16)
1
480
1
15
Methyl propyl ketone
107-87-9
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
3
1
GC/FID
CT (SKC 226-01)
≤0.2
3-30
20
1
GC/FID
CT (SKC 226-01) (2 tubes)
0.1-0.2
2-96
2
1
Methyl styrene
98-83-9
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Methyl tert-butyl ether (MTBE)
1634-04-4
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Store samples cold.
Separate tubes after sampling.
n-Methyl-2 pyrrolidone (nmp)
872-50-4
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.2
10
3
17
This is the default method if none specified on COC. Store cold; protect from light.
n-Methyl-2 pyrrolidone (nmp)
872-50-4
NIOSH 1302
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1302.pdf)
GC/NPD
CT (SKC 226-01)
0.05-0.2
0.5-125
3
-
Methylamine
74-89-5
NIOSH 2007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2007.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-1.0
3-30
3
10
Store cold.
Store cold
Methylcyclohexane
108-87-2
NIOSH 2007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2007.pdf)
GC/FID
CT (SKC 226-01)
0.2
4
2
1
Methylene bisphenyl isocyanate (MDI)
also see isocyanate scan
101-68-8
NIOSH 5521
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5521.pdf)
HPLC
Pip/Tol soln. (Imp)
1
5-500
0.2
33
Store cold
Methylene bisphenyl isocyanate (MDI)
also see isocyanate scan
101-68-8
OSHA 47
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
47/org047.html)
HPLC
GFF-T11 (SKC 225-9002)
1
15-240
0.2
4
Recommend: transfer filter to vial w/ DMSO/ACN after sampling.
Methylene chloride
75-09-2
OSHA 80
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
80/org080.html)
GC/FID
Anasorb CMS (ORBO 90, 91 or SKC 226-81A)
0.05
3
3
-
Methylene chloride
75-09-2
NIOSH 1005
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1005.pdf)
GC/FID
CT (SKC 226-01) (2 tubes)
0.01-0.2
0.5-2.5
3
1
Separate tubes after sampling.
Before shipping, transfer filter to glass vial containing 4 mL 0.1N KOH. Before shipping, transfer filter to glass vial containing
Methylenedianiline, 4,4’-(MDA)
101-77-9
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
HPLC
GFF-T3 (SKC 225-9004)
1.0-2.0
10-1000
0.2
-
Methylenedianiline, 4,4’-(MDA)
101-77-9
OSHA 57
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
57/org057.html)
GC/ECD
GFF-T3 (SKC 225-9004)
1
100
0.03
-
Mineral spirits
68551-17-7
NIOSH 1550
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1550.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.2-20
10
1
2 mL DI water. If available, submit bulk reference material in separate packaging. Do not exceed 2 mg of total dust on filter.
Welding fume method.
Molybdenum
7439-98-7
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
5-67
1
7
2 mL DI water. If available, submit bulk reference material in separate packaging. Do not exceed 2 mg of total dust on filter.
Welding fume method.
ICP
MCE (or PVC-PW w/ total dust)
2
30-480
1
8
2 mL DI water. If available, submit bulk reference material in separate packaging. Do not exceed 2 mg of total dust on filter.
Welding fume method.
≤0.2
20
1
-
Based on 2nd -Ed. NIOSH S150 method.
Molybdenum
7439-98-7
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
Morpholine
110-91-8
NIOSH 2010
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2010.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
Morpholine
110-91-8
OSHA PV 2123
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv212
3/pv2123.html)
GC/FID
XAD-7 treated (H2SO4) (SKC 226-98)
0.1
10
40
40
Store samples cold if not shipped to lab quickly.
Naphtha
8030-30-6
NIOSH 1550
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1550.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.2-20
10
1
If available, submit bulk reference material in separate packaging.
Naphthalene also see PAH scans
91-20-3
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-1.0
100-200
10
1
Naphthalene also see PAH scans
91-20-3
OSHA 35
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
35/org035.html)
GC/FID
Chrm 106 (SKC 226-110)
0.2
10
1
-
Naphthalene also see PAH scans
91-20-3
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Naphthylamine, 2or 1
134-32-7
OSHA 93
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
93/org093.html)
GC/ECD
GFF-T3 (SKC 225-9004)
1
100
0.05
-
Transfer filter into a glass vial w/ 2 mL DI water, w/in 10 hrs. of sampling.
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
5-1000
1
7
Do not exceed 2 mg of total dust on filter.
ICP
MCE (or PVC-PW w/ total dust)
2
30-480
1
8
Welding fume method.
Also use a 0.8 MCE prefilter, if particulate nickel could be present.
Nickel
7440-02-0
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
Nickel
7440-02-0
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
Nickel carbonyl
13463-39-3
NIOSH 6007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/6007.pdf)
ICP/MS
ORBO 304 (see Special Instructions)
0.05 – 0.2
7-80
0.01
-
Nicotine
54-11-5
NIOSH 2544
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2544.pdf)
GC/NPD
XAD-2 (SKC 226-30-04)
≤1.0
100
2
-
Nicotine
54-11-5
NIOSH 2551
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2551.pdf)
GC/NPD
XAD-4 (SKC 226-93)
0.1-1.0
0.5-600
2
-
Nitric acid also see acid scan
7697-37-2
NIOSH 7903
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7903.pdf)
IC
SG-T12 (SKC 226-10-03 or ORBO 53)
0.2-0.5
3-100
10
3
Nitric oxide
10102-43-9
OSHA ID-190
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
90/id190.pdf)
IC
Mol. Sieve Set-T15 (SKC 226-40)
0.025
6
4
-
Nitrobenzene
98-95-3
NIOSH 2005
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2005.pdf)
GC/FID
SG (SKC 226-10 or 226-15)
0.01-1.0
10-150
3
-
Nitrogen dioxide (NO2)
10102-44-0
OSHA ID-182
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
82/id182.pdf)
IC
Mol. Sieve-T15 (SKC 226-40-02)
0.2
3
3
-
Store cold.
NIOSH 6014
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/6014-1.pdf)
Wet Chem
Mol. Sieve Set-T15 (SKC 226-40)
0.025
1.5-6.0
3/2
-
Store cold; see method for sampling train (3 tubes in series)
Nitrogen oxides (NO/NO2)
Nitroglycerin
55-63-0
NIOSH 2507
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2507nit.pdf)
GC/ECD
Tenax (SKC 226-35-03)
0.2-1.0
3-100
0.5
-
Nitromethane
75-52-5
NIOSH 2527
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2527.pdf)
GC/FID
Chrm. 106 (SKC 226-111A)
0.01-0.05
1.0-3.0
20
-
Nuisance dust (respirable)
NIOSH 0600
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/0600.pdf)
Gravimetric
PVC-PW (cyclone type determines 2-pc. or 3-pc. cassette)
See special handling
instructions.
20-400
50
-
Nuisance dust (total)
NIOSH 0500
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/0500.pdf)
Gravimetric
PVC-PW-2pc
1.0-2.0
7-133
50
-
Octane
111-65-9
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
≤0.2
4
2
1
Oil mist (as particulate)
8012-95-1
NIOSH 0500
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/0500.pdf)
Gravimetric
PVC-PW
1.5-2.0
25-133
50
-
Store cold. Protect from prolonged exposure to light.
Store cold; see method for sampling train.
Requires use of a cyclone; follow manufacturer’s instructions for flow rate.
Store cold.
Oil mist (or MWF) method includes
particulate analysis
Oil mist (mineral)
8012-95-1
8012-95-1
Organotins also see organotin scans
NIOSH 5524
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5524.pdf)
NIOSH 5524
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5524.pdf)
IR
PVC-PW
1.0-2.0
20-500
NIOSH 5526
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5526.pdf)
GC/FPD
OVS-2 (SKC 226-30-16)
0.25-1.0
15-75
Gravimetric
PTFE-2 µm, preweighed and precleaned
2
960
100
-
Store cold. Lab must analyze w/in 2 wks. of collection.
50
-
Not a preferred method. Oil must be soluble in freon. Bulk reference material (oil) required; ship in separate packaging. Use
PVC-PW, for total particulate, if bulk not soluble.
Varies
-
Store samples cold and analyze within 14 days of sampling.
Oxalic acid
144-62-7
OSHA PV 2115
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv211
5/pv2115.pdf)
IC
GFF-37mm
1
100
10
-
Ozone
10028-15-6
OSHA ID-214
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id2
14/id214.pdf)
Wet Chem
GFF-T21 (SKC 225-9014)
0.25-0.5
90-120
5
-
Paraffin wax
8002-74-2
OSHA PV 2047
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv204
7/2047.html)
GC/FID
GFF-37mm
1
100
20
-
Parathion
56-38-2
OSHA 62
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
62/org062.html)
GC/FPD
OVS-2 (SKC 226-30-16)
1
60
0.5
15
NIOSH 0600
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/0600.pdf)
Gravimetric
PVC-preweighed (cyclone determines 2-pc. or 3-pc. cassette)
See handling
instructions
75-1000
50
-
NIOSH 0500
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/0500.pdf)
Gravimetric
PVC-preweighed-2pc
1.5-2.0
25-1000
50
-
OSHA 39
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
39/org039.html)
HPLC
XAD7-T16 (w/GFF disc) (3 tube set is SKC 226-97)
0.2
48
1
-
SKC set contains disc and tubes. See method for important sampling train details.
Store cold; flow rate/ volume from NIOSH 2016. See EPA method for more information on special sampling situations.
Particulate (respirable)
Particulate (total)
Pentachlorophenol
87-86-5
Media has 28-day shelf-life, so allow time for filters to be made; see method if sulfur dioxide or nitrate present when sampling.
Requires use of a cyclone; follow manufacturer’s instructions for flow rate.
Pentanal
110-62-3
EPA TO-11
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to11ar.pdf)
HPLC
SG-T2 (SKC 226-119)
0.2-1.5
1-15
0.5
5
Pentane
109-66-0
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.05
2
2
1
Pentanedione, 2,3
600-14-6
OSHA 1016
[View]
(https://www.osha.gov/dts/sltc/methods/validated/10
16/1016.pdf)
GC/FID
SG – washed & baked (226-183: set of 2 tubes)
0.05 (0.2 for STEL)
10 (3 for STEL)
1
42
Analyze w/in 17 days of sampling. Protect samples from light during & after sampling, using tube holders, aluminum foil, or
other means. Store cold.
EPA TO-10A
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to10ar.pdf)
GC/ECD
PUF
variable
variable
varies
29
Store cold; wrap in foil for shipment; lab must extract sample within 7 days of sampling. Lab does not stock PUF media. See
method for more details.
Pesticides (chlorinated)/PCBs also see
pesticide scans
Petroleum distillates
8002-05-9
NIOSH 1550
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1550.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.2-20
10
1
If available, submit bulk reference material in separate packaging.
Petroleum ether
8032-32-4
NIOSH 1550
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1550.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.2-20
3
1
If available, submit bulk reference material in separate packaging.
GC/FID
CT (SKC 226-01)
0.01-0.2
0.2-20
10
1
If available, submit bulk reference material in separate packaging.
HPLC
PTFE-2µm/XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
NIOSH 1550
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1550.pdf)
Phenanthrene (also see PAH scans)
85-01-8
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
Phenanthrene (also see PAH scans)
85-01-8
OSHA 58
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
58/org058.html)
HPLC
GFF-37mm
2
960
0.3
6
Phenol
108-95-2
NIOSH 2546
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2546.pdf)
GC/FID
XAD-7 (SKC 226-95)
0.01-0.1
1-24
3
25
Phenol
108-95-2
OSHA 32
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
32/org032.pdf)
HPLC
XAD-7 (SKC 226-95)
0.1
24
3
26
Phenylenediamine o-, m-, p-, and/or total
106-50-3
OSHA 87
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
87/org087.html)
HPLC
GFF-T3 (SKC 225-9004)
1
100
3
-
GC/FID
CT (SKC 226-01)
0.01-0.2
1-50
3
1
GC/FID
SG (SKC 226-10 or 226-15)
0.01-0.2
1-40
6
-
Petroleum naphtha
Phenyl ether
101-84-8
NIOSH 1617
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1617.pdf)
Phenyl ether-diphenyl mixture
8004-13-5
NIOSH 2013
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2013.pdf)
Phenyl glycidyl ether
122-60-1
NIOSH 1619
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1619.pdf)
GC/FID
CT (SKC 226-01)
≤1.0
80-150
4
-
Phosgene
75-44-5
OSHA 61
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
61/org061.html)
GC/NPD
XAD2 -T1 (SKC 226-117 or ORBO 24)
1
240
2
-
Store cold. Minimum sample batch is a sample and a field blank.
ICP
GFF / polyester-T18 (SKC 225-9018)
1.0-2.0
30-240
5
-
Media requires special prep, so filters need to be ordered in advance. Media shelf life is 3 months.
IC
SG-T12 (SKC 226-10-03 OR ORBO 53)
0.2-0.5
3-100
8
3
Phosphine
7803-51-2
OSHA 1003
[View]
(https://www.osha.gov/dts/sltc/methods/mdt/mdt100
3/1003.pdf)
Phosphoric acid also see acid scan
7664-38-2
NIOSH 7903
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7903.pdf)
Phosphoric acid also see acid scan
7664-38-2
OSHA ID-111
[View]
(https://www.osha.gov/dts/sltc/methods/partial/id111/
id111.html)
IC
MCE
2
960
10
-
Phosphorus (particulate)
7723-14-0
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
25-2000
1
7
Do not exceed 2 mg of total dust on filter.
Phosphorus (vapor)
7723-14-0
NIOSH 7905
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7905.pdf)
GC/FPD
Tenax (SKC 226-35-03)
0.01-0.2
5-100
0.003
-
Must be analyzed w/in 7 days after sampling.
Phthalic anhydride
85-44-9
OSHA 90
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
90/org090.html)
HPLC
GFF (treated with veratrylamine) (SKC 225-9021)
1
75
1
-
Media has a shelf life of 3
GC/FID
CT (SKC 226-01)
0.01-0.2
2-30
2
1
Store cold.
GC/FID
CT (SKC 226-01)
0.01-0.2
2-30
2
1
Store cold.
Pinene, alpha
80-56-8
NIOSH 1552
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1552.pdf)
Pinene, beta
127-91-3
NIOSH 1552
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1552.pdf)
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP/MS
MCE
1.0-4.0
200-2000
1
-
Do not exceed 2 mg of total dust on filter.
NIOSH 5503
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5503.pdf)
GC/ECD
GFF-13mm / Florisil (SKC 226-39)
0.05-0.2
1-50
0.1
-
Protect from light; transfer filter to glass vial w/ teflonlined cap.
Platinum
Polychlorobiphenyls (PCB)
7440-06-4
Polychlorobiphenyls (PCB) (7 aroclors)
also see Pesticide scans
EPA TO-10A
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to10ar.pdf)
GC/ECD
PUF
1.0-5.0
240-7200
1
29
Store cold; wrap in foil for shipment; lab must extract sample within 7 days of sampling. Lab does not stock PUF media. See
method for more details.
Polychlorobiphenyls (PCB) Wipes
EPA 8082
[View]
(http://www3.epa.gov/epawaste/hazard/testmethods/
sw846/pdfs/8082a.pdf)
GC/ECD
Gauze pad, glass wool, or filter paper (whatman 40ashless)
N/A
N/A
Varies
-
Template often 100 cm2 . Dampen media with hexane and place in glass vial.
Polynuclear Aromatic Hydrocarbons 17
PAHs
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Polynuclear Aromatic Hydrocarbons 5
PAH's
OSHA 58
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
58/org058.html)
HPLC
GFF-37mm
2
200-1000
0.3
6
Protect from light; after sampling: fold filter, wipe inside of cassette with filter, and transfer filter to vial w/ teflon-lined cap.
Potassium
7440-09-7
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
10-1000
10
7
Do not exceed 2 mg of total dust on filter.
Potassium hydroxide
1310-58-3
NIOSH 7401
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7401.pdf)
Wet Chem
PTFE-1µm
1.0-4.0
70-1000
30
20
Alkaline dust method.
Propane
74-98-6
OSHA PV2077
[View]
(https://www.osha.gov/dts/sltc/methods/partial/tpv2077-01-9003-ch/t-pv2077-01-9003-ch.html)
GC/FID
Anasorb CMS (2 tubes) (ORBO 91)
0.1
5
3
12
Separate tubes after sampling. Cannot use regular charcoal tubes (226-01) or 3M badges.
Propionaldehyde also see aldehyde scans
123-38-6
EPA TO-11
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to11ar.pdf)
HPLC
SG-T2 (SKC 226-119)
0.03-1.5
1-15
0.5
5
Store cold; flow rate/volume from NIOSH 2016. See EPA method for more information on special sampling situations.
Propyl acetate, n-
109-60-4
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
2
1
Propyl alcohol,n-
71-23-8
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
4
1
Propyl cellosolve
2807-30-9
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.05
1-10
2
17
Propyl mercaptan, n-
107-03-9
NIOSH 2525
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2525.pdf)
GC/FPD
Chrm. 104
0.01-0.05
1-4
1
14
Propylene glycol
57-55-6
NIOSH 5523
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5523.pdf)
GC/FID
OVS-7 (SKC 226-57)
0.5-2.0
5-60
10
16
Store cold.
Propylene oxide
75-56-9
NIOSH 1612
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1612.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.5-5.0
2
-
Store cold. Notify lab if acetone or IPA present (possible interferences).
Propylene oxide
75-56-9
OSHA 88
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
88/org088.html)
GC/FID
Anasorb 747 (226-81A)
0.1
5
2
-
Store frozen, but cold shipment to lab not required.
Pyrene see also PAH scan
129-00-0
NIOSH 5506
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5506.pdf)
HPLC
PTFE-2µm / XAD-2 (SKC 226-30-04 or ORBO 43)
2
200-1000
3
2
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Pyrene see also PAH scan
129-00-0
OSHA 58
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
58/org058.html)
HPLC
GFF-37mm
2
960
0.3
6
Store cold; protect from light; after sampling, transfer filter to vial w/ teflon-lined cap.
Pyrethrum
8003-34-7
NIOSH 5008
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5008.pdf)
HPLC
GFF-37mm
1.0-3.0
20-400
5
-
Pyridine
110-86-1
NIOSH 1613
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1613.pdf)
GC/FID
CT (SKC 226-01)
0.01-1.0
18-150
4
-
NIOSH 7500
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7500.pdf)
XRD
PVC-PW
See handling
instructions
400-1000
20
34
GC/FID
OVS-7 (SKC 226-57)
1.0
60
10
-
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
13-2000
1
7
Do not exceed 2 mg of total dust on filter.
See handling
instructions
400-1000
10
34
Preweighed filter, only if particulate required on same filter. Requires use of a cyclone for respirable dust collection. Follow
manufacturer’s instructions for flow rate. Indicate possible interferences, such as calcite, on CoC.
N/A
0.50%
-
Indicate possible interferences, such as calcite, on CoC.
Quartz (see Silica, crystalline)
Resorcinol
108-46-3
OSHA PV 2053
[View]
(https://www.osha.gov/dts/sltc/methods/partial/pv205
3/2053.html)
Selenium
7782-86-6
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
Silica, crystalline 3 polymorphs: quartz,
cristobalite, and tridymite
14808-60-7
NIOSH 7500
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7500.pdf)
XRD
PVC preweighed (For respirable, use a cyclone, which determines 2-or 3pc. cassette)
Silica, crystalline Bulk sample
14808-60-7
NIOSH 7500
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7500.pdf)
XRD
Place sample in vial or ziplock baggie.
N/A
Preweighed filter only if particulate required on same filter. Requires use of a cyclone for respirable dust collection. Follow
manufacturer’s instructions for flow rate.
Silicon
7440-21-3
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
10-1000
1
7
Do not exceed 2 mg of total dust on filter.
Silver
7440-22-4
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
250-2000
0.2
7
Do not exceed 2 mg of total dust on filter.
Sodium
7440-23-5
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
13-2000
10
7
Do not exceed 2 mg of total dust on filter.
Sodium azide
26628-22-8
OSHA ID-211
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id2
11/id211.html)
IC
PVC
1
5
0.4
-
Store samples cold (although cold shipment not required). Analysis of samples stored at room temperature required w/in 10
days.
Sodium hydroxide
1310-73-2
NIOSH 7401
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7401.pdf)
Wet Chem
PTFE-1µm
1.0-4.0
70-1000
20
20
Stoddard solvent
8052-41-3
NIOSH 1550
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1550.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.2-20
10
1
If available, submit bulk reference material in separate packaging.
Do not exceed 2 mg of total dust on filter.
Strontium
7440-24-6
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
10-1000
1
7
Styrene
100-42-5
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-1.0
1-14
10
1
Styrene
100-42-5
OSHA 89
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
89/org089.html)
GC/FID
CT-T4 (SKC 227-73 or ORBO 351)
0.05
12
5
-
Cold shipment not required, but storage at reduced temperature recommended.
Sulfur dioxide also see sulfur oxides
7446-09-5
NIOSH 6004
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/6004.pdf)
IC
MCE / Treated pad-T20 (SKC 225-9005)
0.5-1.5
4-200
4
-
Do not exceed 2 mg of particulate loading on filter; see method if sulfuric acid analysis will be required.
Sulfur dioxide also see sulfur oxides
7446-09-5
OSHA ID-200
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id2
00/id200.html)
IC
Carbon bead-T (SKC 226-80)
0.1
1.5-12
2.7
-
-
Sulfur dioxide also see sulfur oxides
7446-09-5
OSHA ID-1011
[View]
(https://www.osha.gov/dts/sltc/methods/validated/10
11/1011.pdf)
IC
SG-treated (AgNO3) & treated GFF (SKC 226-177)
0.05-0.5
7.5-12
4
39
Store cold. Use media from the same lot for each sample batch.
Sulfuric acid also see acid scan
Sulfuric acid also see acid scan
7664-93-9
7664-93-9
Sulfur oxides (SOx) (3 forms: sulfur
dioxide, sulfate, sulfite)
NIOSH 7903
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7903.pdf)
IC
OSHA ID-113
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
13/id113.html)
IC
MCE
NIOSH 6004
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/6004.pdf)
IC
MCE / Treated pad-T20 (SKC 225-9005)
SG-T12 (SKC 226-10-03 or ORBO 53)
0.2-0.5
3-100
10
-
2
480
10
3
After sampling, remove filter from cassette and place in a glass for transport to the lab.
0.5-1.5
4-200
4
-
Do not exceed 2 mg of particulate loading on filter; see method if sulfuric acid analysis will be required.
Tellurium
13494-80-9
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
125-1000
1
-
Do not exceed 2 mg of particulate loading on filter
Terphenyl (total, o, m, & p) each one
reported is charged as a separate analyte
26140-60-3
NIOSH 5021
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5021.pdf)
GC/FID
PTFE-2µm
1.0-3.0
2-30
10
-
Ship samples in glass vials w/ teflon-lined caps.
Tetrabromoethane, 1,1,2,2
79-27-6
NIOSH 2003
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2003.pdf)
GC/FID
SG (SKC 226-10 or 226-15)
0.2-1.0
50-100
10
1
Tetrachloroethane, 1,1,2,2
79-34-5
NIOSH 1019
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1019.pdf)
GC/FID
Anasorb 747 (SKC 226-81A)
0.01-0.2
3-30
5
1
Tetrachloroethylene
127-18-4
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
3-40
4
1
OSHA 1001 is written for passive badges (SKC 575002). Lab will cite equivalent analytical method (OSHA 7).
Tetrahydrofuran
109-99-9
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-9.0
3
1
Thallium
7440-28-0
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
25-2000
1
7
Analysis for this metal not recommended for wipe samples. Do not exceed 2 mg of total dust on filter.
Tin
7440-31-5
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
5-500
1
7
Do not exceed 2 mg of total dust on filter.
Titanium
7440-32-6
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
5-100
1
7
Do not exceed 2 mg of total dust on filter.
Gravimetric
PVC-preweighed-2pc
1.5-2.0
25-1000
50
-
HPLC
SG-T2 (SKC 226-119)
0.03-1.5
1-15
2
5
Store cold;
Method OSHA 111 is written for passive monitors (SKC 575-002 or 3M 3520). Lab will cite equivalent analytical method
(OSHA 7).
Titanium dioxide
13463-67-7
NIOSH 0500
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/0500.pdf)
Tolualdehyde (total)
104-87-0
EPA TO-11
[View]
(http://www3.epa.gov/ttnamti1/files/ambient/airtox/to11ar.pdf)
Toluene
108-88-3
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
2-8.0
2
1
Toluene
108-88-3
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
2-8.0
2
1
Toluene diisocyanate,2,4 (2,4-TDI) also
see isocyanate scans
584-84-9
NIOSH 5521
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5521.pdf)
HPLC
Pip/Tol soln. (Imp)
1
5-500
0.2
33
Ship samples in glass vials w/ teflon-lined caps.
Toluene diisocyanate,2,4 (2,4-TDI) also
see isocyanate scans
584-84-9
OSHA 42
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
42/org042.html)
HPLC
GFF-T11 (SKC 225-9002)
1
15-240
0.2
4
Store cold; sample open-faced; protect from light.
Toluene diisocyanate,2,6 (2,6-TDI) also
see isocyanate scans
91-08-7
NIOSH 5521
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5521.pdf)
HPLC
Pip/Tol soln.(Imp)
1
5-500
0.2
33
Ship samples in glass vials w/ teflon-lined caps.
Toluene diisocyanate,2,6 (2,6-TDI) also
see isocyanate scans
91-08-7
OSHA 42
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
42/org042.html)
HPLC
GFF-T11 (SKC 225-9002)
1
15
0.2
4
Store cold; sample open-faced; protect from light.
Toluidine, o-
95-53-4
NIOSH 2002
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2002.pdf)
GC/FID
SG (SKC 226-10 or 226-15)
0.02-1.0
10-150
3
18
NIOSH 1550
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1550.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.2-20
10
1
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5034.pdf)
GC/FPD
MCE
1.0-3.0
2-100
0.5
-
HPLC
SG (SKC 226-10 or 226-15)
≤10
≤0.2
10
-
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
10
6
1
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
10-60
3
-
GC/FID
CT (SKC 226-01)
0.01-0.2
10-60
3
1
GC/FID
CT (SKC 226-01)
0.01-0.2
1-30
4
1
Total hydrocarbons
Tributyl phosphate
126-73-8
NIOSH 5034
Trichloroacetic acid
76-03-9
In-house method
Trichlorobenzene, total
Trichloroethane, 1,1,1
71-55-6
Trichloroethane, 1,1,2
79-00-5
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Trichloroethylene
79-01-6
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
Triethanolamine
102-71-6
OSHA PV 2141
[View]
(https://www.osha.gov/dts/sltc/methods/partial/tpv2141/t-pv2141.pdf)
GC/FID
GFF-37mm
1
100
40
-
Triethylamine
121-44-8
NIOSH 2007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2007.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.1-1.0
3-30
1
9
Triethylenetetramine
112-24-3
NIOSH 2540
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2540-2.pdf)
HPLC
XAD2-T5 (SKC 226-30-18)
0.01-0.1
1-20
10
37
Triethylenetetramine
112-24-3
OSHA 60
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
60/org060.html)
HPLC
XAD2-T5 (SKC 226-30-18)
0.1
10
10
37
Trimethylamine
75-50-3
NIOSH 2007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/2007.pdf)
GC/NPD
SG (SKC 226-10 or 226-15)
0.01-1.0
3-30
2
10
Trimethylbenzene (total, or individual
isomers)
25551-13-7
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.2
2-30
6
1
Triphenyl phosphate
115-86-6
NIOSH 5038
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/5038.pdf)
GC/FPD
MCE
1.0-3.0
10-400
0.5
-
Tungsten
7440-33-7
OSHA ID-213
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id2
13/id213.html)
ICP
MCE
2
30-480
10
38
Store cold.
Store cold.
PVC can only be used for soluble tungsten. Special instructions for soluble – see method (Sec. 2.2.6) for details. For wipes,
see method (Sec. 2.3) for special instructions and contact laboratory before collecting samples.
Turpentine
8006-64-2
NIOSH 1550
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1550.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
1-10
10
1
If available, submit bulk reference material in separate packaging.
Vanadium
7440-62-2
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
5-2000
1
7
Do not exceed 2 mg of total dust on filter.
Vanadium
7440-62-2
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
ICP
MCE (or PVC-PW w/ total dust)
2
30-480
1
8
Welding fume method.
Vinyl acetate
108-05-4
NIOSH 1453
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1453.pdf)
GC/FID
Anasorb 747 (ORBO 90 or 92)
0.1-0.2
0.75-24
2
-
Store cold.
Vinyl chloride
75-01-4
NIOSH 1007
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1007.pdf)
GC/FID
CT (SKC 226-01) (2 tubes)
0.05
0.7-5.0
2
1
Store cold; separate tubes after sampling.
Vinyl toluene (total)
2513-15-4
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
≤0.2
3-30
20
1
VM&P naphtha
8032-32-4
NIOSH 1550
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/1550.pdf)
GC/FID
CT (SKC 226-01)
0.01-0.2
0.2-20
10
1
Welding fume, total (as particulate)
NIOSH 0500
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/0500.pdf)
Gravimetric
PVC-preweighed
2
960
50
-
Welding fume (scan 13 metals) also see
previous page, or metals scans
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
ICP
MCE (or PVC-PW w/ total dust)
1.0-3.0
250-1000
Varies
8
OSHA 7
[View]
(https://www.osha.gov/dts/sltc/methods/organic/org0
07/org007.html)
GC/FID
CT (SKC 226-01)
0.01-0.2
2-23
4
1
OSHA 1002 is written for passive badges (SKC 575002). Lab will cite equivalent analytical method (OSHA 7).
ICP
MCE (or PVC-PW w/ total dust)
1.0-4.0
5-200
1
7
Do not exceed 2 mg of total dust on filter.
ICP
MCE (or PVC-PW w/ total dust)
2
30-480
1
8
Welding fume method.
7
Some forms of zirconium are not soluble in the acid prep (such as zirconium oxide); contact laboratory for details. Do not
exceed 2 mg of total dust on filter.
Xylene (total)
1330-20-7
Zinc
7440-66-6
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
Zinc
7440-66-6
OSHA ID-125G
[View]
(https://www.osha.gov/dts/sltc/methods/inorganic/id1
25g/id125g.pdf)
NIOSH 7303
[View](http://www.cdc.gov/niosh/docs/2003154/pdfs/7303.pdf)
Zirconium
7440-67-7
ICP
MCE (or PVC-PW w/ total dust)
2
960
3
If available, submit bulk reference material in separate packaging.
Analyte Name
CAS Number
ACGIH TWA PEL
(ppm)*
ACGIH TWA PEL
(mg/m3)*
ACGIH STEL
(ppm)*
ACGIH STEL
(mg/m3)*
OSHA TWA PEL
(ppm)*
OSHA TWA PEL
(mg/m3)*
OSHA STEL
(ppm)*
OSHA STEL
(mg/m3)*
NIOSH TWA REL
(ppm)*
NIOSH TWA REL
(mg/m3)*
NIOSH STEL
(ppm)*
NIOSH STEL
(mg/m3)*
Method*
Acenaphthene also see PAH scans
83-32-9
Acenaphthylene also see PAH scans
208-96-8
NIOSH 5506
Acetaldehyde also see aldehyde scans
75-07-0
25
200
360
Acetaldehyde also see aldehyde scans
75-07-0
25
200
360
Acetic acid
64-19-7
10
15
10
25
10
25
15
37
OSHA PV 2119
Acetic acid
64-19-7
10
15
10
25
10
25
15
37
NIOSH 1603
Acetic acid
64-19-7
10
15
10
25
10
25
15
37
NIOSH 2011
Acetoin
513-86-0
Acetoin
513-86-0
Acetone
67-64-1
25
Acetonitrile
75-05-8
20
Acetonitrile
75-05-8
20
Acrolein
107-02-8
NIOSH 5506
EPA TO-11
OSHA 68
OSHA 1013
OSHA 1012
500
0.1
Acrolein
107-02-8
Acrylamide
79-06-1
Acrylamide
79-06-1
Acrylic acid
79-10-7
2
Acrylic acid
79-10-7
2
Acrylonitrile
107-13-1
2
Acrylonitrile
107-13-1
2
Aldrin
309-00-2
1000
2400
250
590
OSHA 7
40
70
20
34
NIOSH 1606
40
70
20
34
0.1
0.25
0.1
0.25
0.3
0.8
0.1
0.25
0.1
0.25
0.3
0.8
0.03
0.3
0.03
0.3
Alkaline dust
-
Allyl alcohol
107-18-6
0.5
Allyl chloride
107-05-1
1
0.03
2
OSHA 52
OSHA PV 2004
0.03
OSHA 21
2
6
OSHA PV 2005
2
6
1
2
0.05
OSHA 37
NIOSH 2501
1
0.25
OSHA 28
10
NIOSH 1604
10
OSHA 37
0.25
EPA TO-10A
NIOSH 7401
2
Aluminum
7429-90-5
Aluminum oxide
1344-28-1
1
Aminoethanol, 2
141-43-5
Ammonia
7664-41-7
25
35
25
35
2
5
2
5
4
10
OSHA 7
1
3
1
3
2
6
NIOSH 1000
15 (total)
10 (total)
NIOSH 7303
NIOSH 0500
NIOSH 2007
Ammonia
7664-41-7
Amyl acetate,n-
628-63-7
Aniline
62-53-3
Anthracene also see PAH scans
120-12-7
Anthracene also see PAH scans
120-12-7
Antimony
7440-36-0
Antimony
7440-36-0
Arsenic
7440-38-2
Arsenic trioxide
1327-53-3
Arsine (as Arsenic)
7784-42-1
0.005
Asbestos
1332-21-4
0.1 f/cc
0.1 f/cc
2
50
35
25
18
35
27
NIOSH 6016
35
27
OSHA ID-164
50
35
25
18
100
525
100
525
5
19
OSHA 7
NIOSH 2002
NIOSH 5506
OSHA 58
0.5
0.5
0.5
NIOSH 7303
0.5
0.5
0.5
0.01
0.01
0.002
0.2
0.002
OSHA ID-125G
NIOSH 7303
NIOSH 7901
0.05
NIOSH 6001
NIOSH 7400A
Asbestos
1332-21-4
Asphalt fumes See coal tar pitch volatiles
and/or benzene solubles
8052-42-4
0.5
NIOSH 7402
Barium
7440-39-3
0.5
Benzaldehyde also see aldehyde scans
100-52-7
Benzene
71-43-2
5
OSHA 58
NIOSH 7303
EPA TO-11
0.5
2.5
1
5
0.1
1
OSHA 7
Benzene solubles (also see asphalt fumes
and/or coal tar pitch volatiles)
-
NIOSH 5042
Benzo (a) anthracene also see PAH scans
56-55-3
NIOSH 5506
Benzo (a) pyrene also see PAH scans
50-32-8
NIOSH 5506
Benzo (a) pyrene also see PAH scans
50-32-8
OSHA 58
Benzo (b) fluoranthene also see PAH
scans
205-99-2
NIOSH 5506
Benzo (e) pyrene also see PAH scans
192-97-2
NIOSH 5506
191-24-2
NIOSH 5506
Benzo (g,h,i) perylene also see PAH
scans
Benzo (k) fluoranthene also see PAH
scans
207-08-9
Benzoyl peroxide
94-30-0
Benzyl alcohol
100-51-6
NIOSH 5506
5
5
5
NIOSH 5009
OSHA PV 2009
Benzyl chloride
100-44-7
Beryllium (air)
7440-41-7
1
0.00005
1
0.002
5
0.005
0.0005
1
5
NIOSH 7303
OSHA 7
Beryllium (air)
7440-41-7
0.00005
0.002
0.005
0.0005
NIOSH 7303-MS
Beryllium (air)
7440-41-7
0.00005
0.002
0.005
0.0005
OSHA ID-125G
Beryllium (air) Wipe samples
7440-41-7
0.00005
0.002
0.005
0.0005
OSHA ID-125G
Beryllium (air) Wipe samples
7440-41-7
0.00005
0.002
0.005
0.0005
Biphenyl
92-52-4
Bis-(2-ethylhexyl) phthalate
117-81-7
OSHA 104
Bisphenol A
80-05-7
NIOSH P&CAM 333
Bisphenol A diglycidyl ether
1675-54-3
NIOSH P&CAM 333
Boron
7440-42-8
Bromine
7726-95-6
Bromochloromethane
74-97-5
EPA 6010
0.2
NIOSH 2530
NIOSH 7303
0.1
0.2
0.1
0.7
0.1
0.7
0.3
2
NIOSH 6011
NIOSH 1003
Bromoform
75-25-2
0.5
0.5
Butadiene, 1,3
106-99-0
2
1
5
5
Butadiene, 1,3
106-99-0
2
1
5
Butane, n-
106-97-8
1000
Butoxyethanol, 2
111-76-2
20
Butyl acetate, n-
123-86-4
150
Butyl acetate, s-
105-46-4
Butyl acetate, t-
0.5
5
OSHA 7
OSHA 56
NIOSH 1024
800
1900
OSHA PV 2010
50
240
5
24
150
710
150
710
200
200
950
200
950
OSHA 7
540-88-5
200
200
950
200
950
OSHA 7
Butyl acrylate
141-32-2
2
10
55
Butyl acrylate
141-32-2
2
Butyl alcohol, n-
71-36-3
100
300
50
150
OSHA 7
Butyl alcohol, s-
78-92-2
150
450
100
305
150
455
OSHA 7
Butyl alcohol, t-
75-65-0
100
300
100
300
150
450
OSHA 7
Butyl carbitol
112-34-5
OSHA 7
Butyl carbitol acetate
98100-70-0
OSHA 7
Butyl cellosolve
111-76-2
Butyl glycidyl ether, n-
2426-08-6
3
Butyl mercaptan, n-
109-79-5
0.5
Butylamine, n-
109-73-9
Cadmium
7440-43-9
0.002
0.005
NIOSH 7303
Cadmium
7440-43-9
0.002
0.005
OSHA ID-125G
Calcium
7440-70-2
Camphor
76-22-2
Caprolactam
105-60-2
200
OSHA 7
200
950
OSHA 7
OSHA 7
OSHA PV 2011
OSHA 7
5
50
270
5.6
30
NIOSH 1616
10
35
0.5
1.8
NIOSH 2542
5
15
5
15
NIOSH 2010
0.005
2
3
5
NIOSH 7303
2
2
0.22
1
OSHA 7
0.66
3
OSHA PV 2012
Captan
133-06-2
5
Carbaryl
63-25-2
0.5
5
5
OSHA 63
Carbaryl
63-25-2
0.5
5
5
NIOSH 5601
Carbon black
1333-86-4
3
3.5
3.5
NIOSH 5000
Carbon black
1333-86-4
3
3.5
3.5
OSHA ID-196
Carbon Disulfide
75-15-0
1
Carbon tetrachloride
56-23-5
5
Cellosolve
110-80-5
Cellosolve acetate
111-15-9
Chlordane
57-74-9
5
20
10
1
3
10
NIOSH 5601
10
30
NIOSH 1600
2
12.6
OSHA 7
OSHA 7
OSHA 7
0.5
0.5
Chlordane (alpha, gamma)
57-74-9
Chlorine
7782-50-5
0.5
1
1
0.5
0.5
1
OSHA 67
0.5
EPA TO-10A
3
0.5
1.45
NIOSH 6011
0.5
1.45
OSHA ID-101
200
1050
Chlorine
7782-50-5
0.5
1
3
Chlorobenzene
108-90-7
10
75
350
Chlorobromomethane
74-97-5
200
200
1050
Chloroform
67-66-3
10
50
240
Chlorpyrifos (Dursban)
2921-88-2
Chromic acid
1333-82-0
0.005
0.001
Chromium
7440-47-3
0.5
0.5
0.5
NIOSH 7303
Chromium
7440-47-3
0.5
0.5
0.5
OSHA ID-125G
OSHA 7
OSHA 7
2
0.1
0.2
9.78
OSHA 7
0.6
OSHA 62
OSHA ID-215
Chromium, hexavalent (Cr+6) Air
18540-29-9
0.01
OSHA ID-215
Chromium, hexavalent (Cr+6) Air Wipe
18540-29-9
0.01
OSHA ID-215
Chrysene also see PAH scans
218-01-9
Chrysene also see PAH scans
218-01-9
Coal Tar Pitch Volatiles (CTPV) also see
benzene solubles and/or asphalt fumes
65996-93-2
0.2
Cobalt
7440-48-4
0.02
0.1
0.05
NIOSH 7303
Cobalt
7440-48-4
0.02
0.1
0.05
OSHA ID-125G
Cobalt
7440-48-4
0.02
0.1
0.05
OSHA ID-213
Copper
7440-50-8
0.2
1
1
NIOSH 7303
Copper
7440-50-8
0.2
1
1
OSHA ID-125G
Cresol (o,m,p)
1319-77-3
20
5
22
2.3
10
NIOSH 2546
Cresols, total
1319-77-3
20
5
22
2.3
10
OSHA 32
Crotonaldehyde also see Aldehyde scans
123-73-9
2
6
2
6
EPA TO-11
Cumene
98-82-8
50
245
Cyanide (gaseous) also see hydrogen
cyanide
Cyanide (gaseous) also see hydrogen
cyanide
NIOSH 5506
OSHA 58
OSHA 58
0.3
50
245
74-90-8
50
10
11
4.7
5
NIOSH 7904
OSHA 7
74-90-8
10
11
4.7
5
OSHA ID-120
Cyanide (particulate)
57-12-5
NIOSH 7904
Cyanide (particulate)
57-12-5
OSHA ID-120
Cyclohexane
110-82-7
100
300
1050
300
1050
OSHA 7
Cyclohexanol
108-93-0
50
50
200
50
200
OSHA 7
Cyclohexanone
108-94-1
20
50
200
25
100
OSHA 7
Cyclohexene
110-83-8
300
300
1015
300
1015
OSHA 7
Cyclohexylamine
108-91-8
10
10
40
NIOSH 2010
10
10
40
OSHA PV 2016
Cyclohexylamine
108-91-8
DDE, 4,4'also see Pesticide scans
72-55-9
DDT, 4,4'also see Pesticide scans
50-29-3
Di-n-octyl phthalate
117-84-0
EPA TO-10A
1
1
0.5
EPA TO-10A
OSHA 104
Diacetone alcohol
123-42-2
Diacetyl
431-03-8
0.01
50
0.01
240
50
240
OSHA 1013
Diacetyl
431-03-8
Diazinon
333-41-5
0.01
0.1
Diazinon
333-41-5
0.01
0.1
Dibasic esters mix of dimethyl adipate,
dimethyl glutarate, and dimethyl succinate
Dibenzo (a,h)anthracene also see PAH
scans
OSHA 7
0.02
0.02
OSHA 1012
NIOSH 5600
OSHA 62
-
OSHA PV 2019/2020/2021
53-70-3
1,2-Dibromo3-chloropropane
96-12-8
NIOSH 5506
0.001
Dibutyl phthalate
84-74-2
Dichloroethane, 1,1
75-34-3
Dichloroethane, 1,2
107-06-2
OSHA 7
Dichloroethylene, 1,1
75-35-4
OSHA 7
Dichloropropane, 1,2(also called
propylene dichloride)
78-87-5
Dichlorvos (DDVP)
62-73-7
0.1
100
Diesel fuel
68334-30-5
Diesel particulate
7440-44-0
Diethanolamine
111-42-2
Diethyl ether
60-29-7
Diethyl phthalate
84-66-2
5
In-house method
5
100
100
400
100
5
OSHA 104
400
OSHA 7
OSHA 7
1
1
OSHA 62
NIOSH 1550
NIOSH 5040
1
3
15
OSHA PV 2018
5
OSHA 104
OSHA 7
5
Diethylamine
109-89-7
5
Diethylene glycol
111-46-6
10
Diethylenetriamine
111-40-0
Diethylenetriamine
111-40-0
Diethylethanolamine
100-37-8
15
25
75
10
30
25
75
NIOSH 2010
1
1
4
1
1
4
OSHA 60
NIOSH 5523
NIOSH 2540
10
50
10
50
NIOSH 2007
Diisobutyl ketone
108-83-8
25
50
290
25
150
NIOSH 1300
Diisopropylamine
108-18-9
5
5
20
5
20
NIOSH 2010
Dimethyl acetamide
127-19-5
10
35
10
35
Dimethyl adipate also see dibasic esters
627-93-0
NIOSH 2004
OSHA PV 2019
Dimethyl-cyclohexylamine
98-94-2
Dimethyl disulfide
624-92-0
NIOSH 2010
Dimethyl ethanolamine
108-01-0
Dimethyl ethylamine
598-56-1
Dimethyl formamide
68-12-2
10
10
30
10
30
Dimethyl formamide
68-12-2
10
10
30
10
30
Dimethyl glutarate also see dibasic esters
1119-40-0
10
In-house method
NIOSH 2007
NIOSH 2007
NIOSH 2004
OSHA 66
OSHA PV 2020
Dimethyl phthalate
131-11-3
Dimethyl succinate also see dibasic esters
106-65-0
5
Dimethyl sulfate
77-78-1
0.1
Dimethyl sulfide
75-18-3
10
5
5
OSHA 104
OSHA PV 2021
1
5
0.1
0.5
NIOSH 2524
In-house method
Dimethyl-ptoluidine, n,n-
99-97-8
Dimethylamine
124-40-3
NIOSH 2002
Dimethylaniline
121-69-7
5
Dioxane, 1,4
123-91-1
20
Dowanol DPM
34590-94-8
OSHA 7
Dowanol PM
107-98-2
OSHA 7
Dowanol PMA
108-65-6
OSHA 7
Dust (see particulate)
-
NIOSH 0500/0600
10
10
18
10
18
5
25
5
25
100
360
NIOSH 2010
10
50
NIOSH 2002
1
3.6
OSHA 7
Elemental carbon (diesel particulate)
-
Endrin
72-20-8
NIOSH 5040
Epichlorohydrin
106-89-8
Ethanolamine (also called
monoethanolamine)
141-43-5
3
Ethyl acetate
141-78-6
400
Ethyl acrylate
140-88-5
5
Ethyl acrylate
140-88-5
5
Ethyl alcohol
64-17-5
Ethyl bromide
74-96-4
0.1
0.1
0.5
5
6
0.1
EPA TO-10A
19
NIOSH 1010
3
6
3
8
400
1400
400
1400
15
25
100
OSHA 7
15
25
100
OSHA 92
1000
1000
1900
200
890
5
1000
6
15
NIOSH 2007
OSHA 7
1900
OSHA 7
NIOSH 1011
Ethyl carbitol
111-90-0
OSHA 7
Ethyl cellosolve
96231-36-6
OSHA 7
Ethyl cellosolve acetate
111-15-9
Ethyl cyanoacrylate, 2
7085-85-0
0.2
400
Ethyl ether
60-29-7
Ethyl-3-ethoxypropionate
763-69-9
Ethyl mercaptan
75-08-1
Ethyl parathion
56-38-2
Ethyl silicate
78-10-4
OSHA 7
OSHA 55
500
400
1200
OSHA 7
0.5
10
25
0.5
1.3
NIOSH 2542
10
100
850
10
85
NIOSH S-264
OSHA 7
OSHA 62
Ethylamine
75-04-7
5
Ethylbenzene
100-41-4
20
15
10
18
10
18
100
435
100
435
Ethylene dibromide
106-93-4
Ethylene glycol
107-21-1
Ethylene oxide
75-21-8
1
1
0.1
0.18
Ethylene oxide
75-21-8
1
1
0.1
0.18
OSHA 49
Ethylenediamine
107-15-3
10
10
25
10
25
NIOSH 2540
Ethylenediamine
107-15-3
10
10
25
10
25
Ethylhexyl acrylate, 2
103-11-7
20
0.045
NIOSH 2007
125
545
OSHA 7
OSHA 7
100
NIOSH 5523
OSHA 1010
OSHA 60
OSHA PV2026
Fibrous glass also see other fiber options
NIOSH 7400B
Fluoranthene also see PAH scans
206-44-0
NIOSH 5506
Fluorene also see PAH scans
86-73-7
NIOSH 5506
Fluoride (gaseous)
7664-39-3
NIOSH 7902
Fluoride (gaseous)
7664-39-3
OSHA ID-110
Fluoride (particulate)
16984-48-8
2.5
NIOSH 7902
Fluoride (particulate)
16984-48-8
2.5
OSHA ID-110
Formaldehyde also see Aldehyde scans
50-00-0
0.3
0.75
2
0.016
NIOSH 2016
Formaldehyde also see Aldehyde scans
50-00-0
0.3
0.75
2
0.016
EPA TO-11
Formaldehyde also see Aldehyde scans
50-00-0
0.3
0.75
2
0.016
OSHA 52
Formaldehyde also see Aldehyde scans
50-00-0
0.3
0.75
2
0.016
NIOSH 3500
Formaldehyde also see Aldehyde scans
50-00-0
0.3
0.75
2
0.016
OSHA ID-205
Formaldehyde also see Aldehyde scans
50-00-0
0.3
0.75
2
0.016
OSHA 1007
Formaldehyde also see Aldehyde scans
50-00-0
0.3
0.75
2
0.016
NIOSH 3500
Formic Acid
64-18-6
10
5
Freon 113
76-13-1
NIOSH 1006
Freon 114
76-14-2
NIOSH 1018
Freon 141B
1717-00-6
OSHA 7
Freon 22
75-46-6
Furfural
98-01-1
5
9
5
9
NIOSH 2011
OSHA 7
2
5
20
OSHA 72
Furfuryl alcohol
98-00-0
gamma-BHC
58-89-9
Glutaraldehyde
111-30-8
10
111-30-8
Halothane
151-67-7
Heptane
142-82-5
400
Hexachlorobutadiene
87-68-3
0.02
Hexachloroethane
67-72-1
1
Hexaldehyde also see Aldehyde scans
9012-63-9
Hexamethylenediamine
50
200
10
40
15
60
NIOSH 2505
0.05
0.2
0.8
NIOSH 2532
0.05
0.2
0.8
OSHA 64
2
16.2
OSHA 103
440
1800
EPA TO-10A
Glutaraldehyde
Hexamethylene diisocyanate (HDI) see
isocyanate scan also
Hexamethylene diisocyanate (HDI) see
isocyanate scan also
15
50
500
500
1
2000
10
85
350
0.02
0.24
1
10
OSHA 7
EPA TO-11
822-06-0
0.005
0.005
0.035
0.02
0.14
822-06-0
0.005
0.005
0.035
0.02
0.14
124-09-4
Hexane, n-
110-54-3
Hexyl cellosolve
32167-24-1
Hexylene glycol
107-41-5
OSHA 7
NIOSH 2543
NIOSH 5521
OSHA 42
NIOSH 2007
50
500
1800
500
1800
OSHA 7
25
125
In-house method
OSHA 7
25
Hydrazine
301-01-2
Hydrazoic acid
7782-79-8
0.01
1
1.3
0.03
0.04
OSHA 108
Hydrobromic acid also see acid scan
10035-10-6
3
10
3
10
Hydrochloric acid also see acid scan
7647-01-0
5
7
5
7
Hydrofluoric acid also see acid scan
7664-39-3
5
7
5
7
Hydrogen cyanide also see cyanide
74-90-8
10
11
Hydrogen peroxide
7722-84-1
1
1
1.4
Hydrogen sulfide
7783-06-4
1
5
20
10
NIOSH 6013
Hydrogen sulfide
7783-06-4
1
5
20
10
OSHA ID-1008
Hydrogenated MDI (H2MDI)
88504-76-1
Hydroquinone
123-31-9
1
2
2
NIOSH 5004
Hydroquinone
123-31-9
1
2
2
OSHA PV 2094
Indeno (1,2,3-cd) pyrene also see PAH
scans
193-39-5
OSHA ID-211
NIOSH 7903
Hydrocarbons, total
NIOSH 1550
4.7
NIOSH 7903
NIOSH 7903
4.7
1
5
1.4
NIOSH 6010
OSHA ID-006
OSHA PV2092
NIOSH 5506
Inorganic Acid Scan also see scans
NIOSH 7903
Iodine
7553-56-2
0.01
Iron
7439-89-6
NIOSH 7303
Iron
7439-89-6
OSHA ID-125G
Isoamyl alcohol
123-51-3
100
Isobutyl acetate
110-19-0
150
Isobutyl alcohol
78-83-1
Isophorone
78-59-1
Isophorone diisocyanate (IPDI)
4098-71-9
0.005
Isopropyl acetate
108-21-4
100
Isopropyl alcohol
67-63-0
Isopropyl ether
108-20-3
250
Isopropylamine
75-31-0
5
0.1
125
5
200
0.1
1
0.1
1
OSHA ID-212
100
360
100
360
150
700
150
700
OSHA 7
100
300
50
150
OSHA 7
25
140
4
23
0.005
0.045
0.02
0.18
500
1225
250
950
400
980
400
980
310
500
2100
500
2100
10
5
12
200
125
450
OSHA 7
OSHA 7
OSHA 42
OSHA 7
OSHA 7
OSHA 7
NIOSH 2007
Kerosene
8008-20-6
Lanthanum
7439-91-0
100
NIOSH 1550
Lead Air samples
7439-92-1
0.05
0.05
0.05
NIOSH 7303
Lead Air samples
7439-92-1
0.05
0.05
0.05
NIOSH 7303-MS
Lead Air samples
7439-92-1
0.05
0.05
0.05
OSHA ID-125G
NIOSH 7303
Lead Wipe samples
7439-92-1
0.05
0.05
0.05
EPA 6010
Lead Paint chips
7439-92-1
0.05
0.05
0.05
EPA 6010
Limonene, d-
5989-27-5
OSHA 7
Lithium
7439-93-2
NIOSH 7303
Magnesium
7439-95-4
Malathion
121-75-5
Maleic anhydride
108-31-6
0.01
0.25
1
Maleic anhydride
108-31-6
0.01
0.25
1
Manganese
7439-96-5
0.02
NIOSH 7303
15
10
OSHA 62
0.25
1
OSHA 25
0.25
1
5
OSHA 86
1
3
NIOSH 7303
3
OSHA ID-125G
Manganese
7439-96-5
0.02
5
1
Mercury (vapor)
7439-97-6
0.01
0.1
0.05
NIOSH 6009
Mercury (vapor)
7439-97-6
0.01
0.1
0.05
OSHA ID-140
Mercury (particulate)
7439-97-6
0.01
0.1
0.1
OSHA ID-145F
Metal-working fluids (MWF) method
includes particulate analysis
NIOSH 5524
Metals-Welding Scan 13 metals
OSHA ID-125G
Metals Scans 28 metals
NIOSH 7303
Metals Scans Wipe Samples
EPA 6010
Methacrylic acid
79-41-4
20
Methanol
67-56-1
200
250
Methanol
67-56-1
200
250
Methyl acrylate
96-33-3
2
10
35
10
35
OSHA 7
Methyl acrylate
96-33-3
2
10
35
10
35
OSHA 92
100
465
100
465
Methyl amyl ketone
110-43-0
50
Methyl aniline
100-61-8
0.5
Methyl bromide
74-83-9
1
Methyl butyl ketone
591-78-6
5
Methyl cellosolve
20
70
OSHA PV 2005
NIOSH 2000
OSHA 91
OSHA 7
NIOSH 2002
20
80
OSHA PV 2040
109-86-4
25
80
0.1
0.3
Methyl cellosolve acetate
110-49-6
25
120
0.1
0.5
Methyl chloride
74-87-3
50
100
100
300
Methyl ethyl ketone (MEK)
78-93-3
200
300
200
590
200
590
300
885
Methyl ethyl ketone (MEK)
78-93-3
200
300
200
590
200
590
300
885
OSHA 7
Methyl formate
107-31-3
50
100
100
250
100
250
150
375
OSHA PV 2041
10
OSHA 7
OSHA 7
OSHA 7
NIOSH 1001
NIOSH 2555
Methyl iodide
74-88-4
2
5
28
2
10
Methyl isoamyl ketone
110-12-3
20
50
100
475
50
240
Methyl isobutyl carbinol
108-11-2
25
40
25
100
25
100
40
165
Methyl isobutyl ketone (MIBK)
108-10-1
20
75
100
410
50
205
75
300
Methyl mercaptan
74-93-1
0.5
10
20
0.5
1
NIOSH 2542
Methyl methacrylate
80-62-6
50
100
100
410
100
410
NIOSH 2537
Methyl methacrylate
80-62-6
50
100
100
410
100
410
OSHA 94
Methyl parathion
298-00-0
0.2
OSHA 62
Methyl propyl ketone
107-87-9
Methyl styrene
98-83-9
Methyl tert-butyl ether (MTBE)
1634-04-4
n-Methyl-2 pyrrolidone (nmp)
872-50-4
OSHA 7
n-Methyl-2 pyrrolidone (nmp)
872-50-4
NIOSH 1302
0.02
NIOSH 1014
OSHA 7
150
10
OSHA 7
OSHA 7
OSHA 7
100
480
50
240
100
485
OSHA 7
OSHA 7
Methylamine
74-89-5
5
Methylcyclohexane
108-87-2
400
15
10
12
10
12
NIOSH 2007
500
2000
400
1600
NIOSH 2007
Methylene bisphenyl isocyanate (MDI)
also see isocyanate scan
Methylene bisphenyl isocyanate (MDI)
also see isocyanate scan
101-68-8
0.005
0.02
0.2
0.005
0.05
0.02
0.2
101-68-8
NIOSH 5521
OSHA 47
Methylene chloride
75-09-2
50
25
125
OSHA 80
Methylene chloride
75-09-2
50
25
125
NIOSH 1005
Methylenedianiline, 4,4’-(MDA)
101-77-9
0.1
0.01
0.1
Methylenedianiline, 4,4’-(MDA)
101-77-9
0.1
Mineral spirits
68551-17-7
Molybdenum
7439-98-7
0.5
15
NIOSH 7303
Molybdenum
7439-98-7
0.5
15
OSHA ID-125G
Morpholine
110-91-8
20
20
70
20
70
30
105
NIOSH 2010
Morpholine
110-91-8
20
20
70
20
70
30
105
OSHA PV 2123
OSHA 7
OSHA 57
NIOSH 1550
Naphtha
8030-30-6
100
400
100
400
Naphthalene also see PAH scans
91-20-3
10
10
50
10
50
15
75
OSHA 7
Naphthalene also see PAH scans
91-20-3
10
10
50
10
50
15
75
OSHA 35
Naphthalene also see PAH scans
91-20-3
10
10
50
10
50
15
75
NIOSH 5506
Naphthylamine, 2or 1
134-32-7
Nickel
7440-02-0
0.1
0.1
Nickel
7440-02-0
Nickel carbonyl
13463-39-3
Nicotine
54-11-5
NIOSH 1550
OSHA 93
1
1
0.05
0.001
0.5
Nicotine
54-11-5
Nitric acid also see acid scan
7697-37-2
2
Nitric oxide
10102-43-9
0.007
0.001
0.5
0.5
0.5
4
0.015
NIOSH 7303
0.015
OSHA ID-125G
0.007
NIOSH 6007
0.5
NIOSH 2544
0.5
2
5
2
5
25
25
30
25
30
NIOSH 2551
4
10
NIOSH 7903
OSHA ID-190
Nitrobenzene
98-95-3
1
1
5
1
5
NIOSH 2005
Nitrogen dioxide (NO2)
10102-44-0
0.2
5
9
1
1.5
OSHA ID-182
Nitroglycerin
55-63-0
0.05
0.2
2
Nitromethane
75-52-5
20
100
250
Nitrogen oxides (NO/NO2)
NIOSH 6014
0.1
NIOSH 2527
Nuisance dust (respirable)
NIOSH 0600
Nuisance dust (total)
NIOSH 0500
Octane
111-65-9
Oil mist (as particulate)
8012-95-1
Oil mist (or MWF) method includes
particulate analysis
8012-95-1
Oil mist (mineral)
8012-95-1
300
500
2350
75
350
385
1800
OSHA 7
NIOSH 0500
NIOSH 5524
5
5
10
NIOSH 5524
1
1
2
OSHA PV 2115
Organotins also see organotin scans
NIOSH 5526
Oxalic acid
144-62-7
1
Ozone
10028-15-6
Paraffin wax
8002-74-2
2
Parathion
56-38-2
0.05
2
0.05
0.1
0.2
0.1
0.1
Particulate (respirable)
0.2
OSHA ID-214
2
OSHA PV 2047
0.05
OSHA 62
5
Particulate (total)
NIOSH 0600
15
Pentachlorophenol
87-86-5
Pentanal
110-62-3
Pentane
109-66-0
Pentanedione, 2,3
600-14-6
0.5
1
NIOSH 0500
0.5
0.5
OSHA 39
EPA TO-11
1000
1000
2950
120
350
610
1800
OSHA 7
OSHA 1016
Pesticides (chlorinated)/PCBs also see
pesticide scans
Petroleum distillates
NIOSH 2507
EPA TO-10A
8002-05-9
500
2000
350
1800
NIOSH 1550
Petroleum ether
8032-32-4
NIOSH 1550
Petroleum naphtha
NIOSH 1550
Phenanthrene (also see PAH scans)
85-01-8
Phenanthrene (also see PAH scans)
85-01-8
NIOSH 5506
Phenol
108-95-2
5
5
OSHA 58
5
5
19
5
19
15.6
60
NIOSH 2546
19
15.6
60
OSHA 32
Phenol
108-95-2
Phenylenediamine o-, m-, p-, and/or total
106-50-3
Phenyl ether
101-84-8
Phenyl ether-diphenyl mixture
8004-13-5
Phenyl glycidyl ether
122-60-1
0.1
Phosgene
75-44-5
0.1
Phosphine
7803-51-2
0.3
Phosphoric acid also see acid scan
7664-38-2
1
3
1
1
3
NIOSH 7903
Phosphoric acid also see acid scan
7664-38-2
1
3
1
1
3
OSHA ID-111
Phosphorus (particulate)
7723-14-0
0.1
0.1
Phosphorus (vapor)
7723-14-0
Phthalic anhydride
85-44-9
Pinene, alpha
80-56-8
Pinene, beta
127-91-3
Platinum
7440-06-4
5
19
0.1
1
0.1
2
1
1
0.1
OSHA 87
7
1
7
NIOSH 1617
1
7
1
7
NIOSH 2013
10
60
1
6
0.1
0.4
0.1
0.4
0.2
0.8
OSHA 61
0.3
0.4
0.3
0.4
1
1
OSHA 1003
NIOSH 1619
NIOSH 7303
NIOSH 7905
1
2
12
1
6
OSHA 90
NIOSH 1552
NIOSH 1552
0.002
1
NIOSH 7303
Polychlorobiphenyls (PCB)
NIOSH 5503
Polychlorobiphenyls (PCB) (7 aroclors)
also see Pesticide scans
EPA TO-10A
Polychlorobiphenyls (PCB) Wipes
EPA 8082
Polynuclear Aromatic Hydrocarbons 17
PAHs
Polynuclear Aromatic Hydrocarbons 5
PAH's
NIOSH 5506
OSHA 58
Potassium
7440-09-7
NIOSH 7303
Potassium hydroxide
1310-58-3
Propane
74-98-6
Propionaldehyde also see aldehyde scans
123-38-6
20
Propyl acetate, n-
109-60-4
200
Propyl alcohol,n-
71-23-8
100
Propyl cellosolve
2807-30-9
OSHA 7
Propyl mercaptan, n-
107-03-9
NIOSH 2525
Propylene glycol
57-55-6
Propylene oxide
75-56-9
2
100
240
Propylene oxide
75-56-9
2
100
240
Pyrene see also PAH scan
129-00-0
2
2
NIOSH 7401
1000
1800
1000
1800
OSHA PV2077
200
840
200
840
250
1050
OSHA 7
200
500
200
500
250
625
OSHA 7
EPA TO-11
250
NIOSH 5523
NIOSH 1612
OSHA 88
NIOSH 5506
Pyrene see also PAH scan
129-00-0
Pyrethrum
8003-34-7
OSHA 58
Pyridine
110-86-1
1
108-46-3
10
5
5
5
15
5
NIOSH 5008
5
15
NIOSH 1613
10
45
Quartz (see Silica, crystalline)
Resorcinol
NIOSH 7500
20
90
OSHA PV 2053
Selenium
7782-86-6
0.2
0.2
NIOSH 7303
Silica, crystalline 3 polymorphs: quartz,
cristobalite, and tridymite
14808-60-7
0.025
0.05
NIOSH 7500
Silica, crystalline Bulk sample
14808-60-7
0.025
0.05
NIOSH 7500
Silicon
7440-21-3
5
5
NIOSH 7303
Silver
7440-22-4
0.01
0.01
NIOSH 7303
0.01
0.2
20
Sodium
7440-23-5
Sodium azide
26628-22-8
NIOSH 7303
Sodium hydroxide
1310-73-2
Stoddard solvent
8052-41-3
Strontium
7440-24-6
Styrene
100-42-5
20
40
100
50
215
100
425
OSHA 7
Styrene
100-42-5
20
40
100
50
215
100
425
OSHA 89
Sulfur dioxide also see sulfur oxides
7446-09-5
0.25
5
13
2
5
5
13
NIOSH 6004
Sulfur dioxide also see sulfur oxides
7446-09-5
0.25
5
13
2
5
5
13
OSHA ID-200
Sulfur dioxide also see sulfur oxides
7446-09-5
0.25
5
13
2
5
5
13
OSHA ID-1011
Sulfuric acid also see acid scan
7664-93-9
0.2
1
1
NIOSH 7903
Sulfuric acid also see acid scan
7664-93-9
0.2
1
1
OSHA ID-113
Tellurium
13494-80-9
0.1
0.1
0.1
NIOSH 7303
Terphenyl (total, o, m, & p) each one
reported is charged as a separate analyte
26140-60-3
NIOSH 5021
Tetrabromoethane, 1,1,2,2
79-27-6
0.1
Tetrachloroethane, 1,1,2,2
79-34-5
1
Tetrachloroethylene
127-18-4
25
100
100
Tetrahydrofuran
109-99-9
50
100
200
Thallium
7440-28-0
0.02
0.1
0.1
NIOSH 7303
2
2
2
NIOSH 7303
10
15
0.11
0.29
0.1
2
100
500
0.3
2
2
2900
350
OSHA ID-211
NIOSH 7401
1800
NIOSH 7303
Sulfur oxides (SOx) (3 forms: sulfur
dioxide, sulfate, sulfite)
NIOSH 6004
5
1
9
0.5
5
5
35
1
7
590
200
590
NIOSH 2003
NIOSH 1019
OSHA 7
250
735
Tin
7440-31-5
Titanium
7440-32-6
Titanium dioxide
13463-67-7
Tolualdehyde (total)
104-87-0
Toluene
108-88-3
20
200
100
375
150
560
Toluene
108-88-3
20
200
100
375
150
560
584-84-9
0.005
0.02
0.02
0.14
584-84-9
0.005
0.02
0.02
0.14
91-08-7
0.005
0.02
91-08-7
0.005
0.02
95-53-4
2
Toluene diisocyanate,2,4 (2,4-TDI) also
see isocyanate scans
Toluene diisocyanate,2,4 (2,4-TDI) also
see isocyanate scans
Toluene diisocyanate,2,6 (2,6-TDI) also
see isocyanate scans
Toluene diisocyanate,2,6 (2,6-TDI) also
see isocyanate scans
Toluidine, o-
NIOSH 1550
OSHA 7
NIOSH 7303
NIOSH 0500
EPA TO-11
OSHA 7
OSHA 7
NIOSH 5521
OSHA 42
NIOSH 5521
OSHA 42
5
22
NIOSH 2002
Total hydrocarbons
NIOSH 1550
Tributyl phosphate
126-73-8
Trichloroacetic acid
76-03-9
5
5
0.5
0.2
2.5
NIOSH 5034
1
7
In-house method
Trichlorobenzene, total
OSHA 7
Trichloroethane, 1,1,1
71-55-6
Trichloroethane, 1,1,2
79-00-5
10
OSHA 7
Trichloroethylene
79-01-6
10
Triethanolamine
102-71-6
10
25
45
10
45
OSHA 7
100
OSHA 7
5
Triethylamine
121-44-8
Triethylenetetramine
112-24-3
0.5
Triethylenetetramine
112-24-3
Trimethylamine
75-50-3
5
Trimethylbenzene (total, or individual
isomers)
25551-13-7
25
Triphenyl phosphate
115-86-6
Tungsten
7440-33-7
Turpentine
8006-64-2
OSHA PV 2141
1
25
100
NIOSH 2007
NIOSH 2540
OSHA 60
15
10
15
36
NIOSH 2007
OSHA 7
3
1
20
24
3
3
3
5
100
560
100
560
NIOSH 5038
10
OSHA ID-213
NIOSH 1550
Vanadium
7440-62-2
NIOSH 7303
Vanadium
7440-62-2
OSHA ID-125G
Vinyl acetate
108-05-4
10
Vinyl chloride
75-01-4
1
Vinyl toluene (total)
2513-15-4
50
VM&P naphtha
8032-32-4
15
4
15
100
480
OSHA 7
350
NIOSH 1550
1
100
100
NIOSH 1453
NIOSH 1007
480
Welding fume, total (as particulate)
NIOSH 0500
Welding fume (scan 13 metals) also see
previous page, or metals scans
OSHA ID-125G
Xylene (total)
1330-20-7
OSHA 7
Zinc
7440-66-6
NIOSH 7303
Zinc
7440-66-6
Zirconium
7440-67-7
OSHA ID-125G
5
10
NIOSH 7303
Scan Name
Analyte List
CAS Numbers
Aldehydes
Acetaldehyde
Aldehydes
RL (ug)
Method*
Analytical Technique
Sampling Media
Flow Rates (Lpm)
Volume (L)
Notes*
75-07-0
EPA TO-11
HPLC
Treated silica gel tube (DNPH) (SKC 226-119)
or badges:AT 571; SKC UMEx100
0.03-1.5 L/min
1-15 L
Store samples cold. When sampling on tubes (SKC 226-119), use formaldehyde (NIOSH 2016) guidelines. See EPA method, if
using DNPH-treated cartridges. Can also use passive badges (AT 571 or SKC UMEx 100)
Acetone
67-64-1
EPA TO-11
HPLC
Treated silica gel tube (DNPH) (SKC 226-119)
or badges:AT 571; SKC UMEx100
0.03-1.5 L/min
1-15 L
Store samples cold. When sampling on tubes (SKC 226-119), use formaldehyde (NIOSH 2016) guidelines. See EPA method, if
using DNPH-treated cartridges. Can also use passive badges (AT 571 or SKC UMEx 100)
Aldehydes
Benzaldehyde
100-52-7
EPA TO-11
HPLC
Treated silica gel tube (DNPH) (SKC 226-119)
or badges:AT 571; SKC UMEx100
0.03-1.5 L/min
1-15 L
Store samples cold. When sampling on tubes (SKC 226-119), use formaldehyde (NIOSH 2016) guidelines. See EPA method, if
using DNPH-treated cartridges. Can also use passive badges (AT 571 or SKC UMEx 100)
Aldehydes
Butyraldehyde
123-72-8
EPA TO-11
HPLC
Treated silica gel tube (DNPH) (SKC 226-119)
or badges:AT 571; SKC UMEx100
0.03-1.5 L/min
1-15 L
Store samples cold. When sampling on tubes (SKC 226-119), use formaldehyde (NIOSH 2016) guidelines. See EPA method, if
using DNPH-treated cartridges. Can also use passive badges (AT 571 or SKC UMEx 100)
Aldehydes
Butanone, 2-(MEK)
78-93-3
EPA TO-11
HPLC
Treated silica gel tube (DNPH) (SKC 226-119)
or badges:AT 571; SKC UMEx100
0.03-1.5 L/min
1-15 L
Store samples cold. When sampling on tubes (SKC 226-119), use formaldehyde (NIOSH 2016) guidelines. See EPA method, if
using DNPH-treated cartridges. Can also use passive badges (AT 571 or SKC UMEx 100)
Aldehydes
Crotonaldehyde
4170-30-3
EPA TO-11
HPLC
Treated silica gel tube (DNPH) (SKC 226-119)
or badges:AT 571; SKC UMEx100
0.03-1.5 L/min
1-15 L
Store samples cold. When sampling on tubes (SKC 226-119), use formaldehyde (NIOSH 2016) guidelines. See EPA method, if
using DNPH-treated cartridges. Can also use passive badges (AT 571 or SKC UMEx 100)
Aldehydes
Formaldehyde
50-00-0
EPA TO-11
HPLC
Treated silica gel tube (DNPH) (SKC 226-119)
or badges:AT 571; SKC UMEx100
0.03-1.5 L/min
1-15 L
Store samples cold. When sampling on tubes (SKC 226-119), use formaldehyde (NIOSH 2016) guidelines. See EPA method, if
using DNPH-treated cartridges. Can also use passive badges (AT 571 or SKC UMEx 100)
Aldehydes
Hexaldehyde
66-25-1
EPA TO-11
HPLC
Treated silica gel tube (DNPH) (SKC 226-119)
or badges:AT 571; SKC UMEx100
0.03-1.5 L/min
1-15 L
Store samples cold. When sampling on tubes (SKC 226-119), use formaldehyde (NIOSH 2016) guidelines. See EPA method, if
using DNPH-treated cartridges. Can also use passive badges (AT 571 or SKC UMEx 100)
Aldehydes
Methacrolein
78-85-3
EPA TO-11
HPLC
Treated silica gel tube (DNPH) (SKC 226-119)
or badges:AT 571; SKC UMEx100
0.03-1.5 L/min
1-15 L
Store samples cold. When sampling on tubes (SKC 226-119), use formaldehyde (NIOSH 2016) guidelines. See EPA method, if
using DNPH-treated cartridges. Can also use passive badges (AT 571 or SKC UMEx 100)
Aldehydes
Pentanal (valderaldehyde)
110-62-3
EPA TO-11
HPLC
Treated silica gel tube (DNPH) (SKC 226-119)
or badges:AT 571; SKC UMEx100
0.03-1.5 L/min
1-15 L
Store samples cold. When sampling on tubes (SKC 226-119), use formaldehyde (NIOSH 2016) guidelines. See EPA method, if
using DNPH-treated cartridges. Can also use passive badges (AT 571 or SKC UMEx 100)
Aldehydes
Propionaldehyde
123-38-6
EPA TO-11
HPLC
Treated silica gel tube (DNPH) (SKC 226-119)
or badges:AT 571; SKC UMEx100
0.03-1.5 L/min
1-15 L
Store samples cold. When sampling on tubes (SKC 226-119), use formaldehyde (NIOSH 2016) guidelines. See EPA method, if
using DNPH-treated cartridges. Can also use passive badges (AT 571 or SKC UMEx 100)
Aldehydes
Tolualdehyde (Total)
104-87-0
EPA TO-11
HPLC
Treated silica gel tube (DNPH) (SKC 226-119)
or badges:AT 571; SKC UMEx100
0.03-1.5 L/min
1-15 L
Store samples cold. When sampling on tubes (SKC 226-119), use formaldehyde (NIOSH 2016) guidelines. See EPA method, if
using DNPH-treated cartridges. Can also use passive badges (AT 571 or SKC UMEx 100)
Amines
Ethylamine
Dimethylamine
Diethylamine
Methylamine
75-04-7
NIOSH 2010
GC/NPD
Silica gel tube (SKC 226-10 or 226-15)
0.01 - 1.0 L/min
3-30 L
Store samples cold.
Amines
Dimethylamine
124-40-3
NIOSH 2010
GC/NPD
Silica gel tube (SKC 226-10 or 226-15)
0.01 - 1.0 L/min
3-30 L
Store samples cold.
Amines
Diethylamine
109-89-7
NIOSH 2010
GC/NPD
Silica gel tube (SKC 226-10 or 226-15)
0.01 - 1.0 L/min
3-30 L
Store samples cold.
Amines
Methylamine
74-89-5
NIOSH 2010
GC/NPD
Silica gel tube (SKC 226-10 or 226-15)
0.01 - 1.0 L/min
3-30 L
Store samples cold.
Amines
Butylamine
Cyclohexylamine
Isopropylamine, nTriethylamine
109-73-9
NIOSH 2010
GC/NPD
Silica gel tube (SKC 226-10 or 226-15)
0.01 - 1.0 L/min
3-30 L
Store samples cold.
Amines
Cyclohexylamine
108-91-8
NIOSH 2010
GC/NPD
Silica gel tube (SKC 226-10 or 226-15)
0.01 - 1.0 L/min
3-30 L
Store samples cold.
Amines
Isopropylamine, n-
75-31-0
NIOSH 2010
GC/NPD
Silica gel tube (SKC 226-10 or 226-15)
0.01 - 1.0 L/min
3-30 L
Store samples cold.
Amines
Triethylamine
122-44-8
NIOSH 2010
GC/NPD
Silica gel tube (SKC 226-10 or 226-15)
0.01 - 1.0 L/min
3-30 L
Store samples cold.
BETX
Benzene
71-43-2
NIOSH 1501
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Store samples cold.
BETX
Ethyl benzene
100-41-4
NIOSH 1501
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Store samples cold.
BETX
Toluene
108-88-3
NIOSH 1501
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Store samples cold.
BETX
Xylenes (o,m,p)
1330-20-7
NIOSH 1501
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Store samples cold.
Inorganic Acids
Hydrobromic acid
Hydrochloric acid
Hydrofluoric acid
Nitric acid
Phosphoric acid
Sulfuric acid
10035-10-6
NIOSH 7903
IC
Treated silica gel tube (water-washed) (SKC
226-10-03)
0.2 - 0.3 L/min
3-100 L
Inorganic Acids
Hydrochloric acid
7647-01-0
NIOSH 7903
IC
Treated silica gel tube (water-washed) (SKC
226-10-03)
0.2 - 0.3 L/min
3-100 L
Inorganic Acids
Hydrofluoric acid
7664-39-3
NIOSH 7903
IC
Treated silica gel tube (water-washed) (SKC
226-10-03)
0.2 - 0.3 L/min
3-100 L
Inorganic Acids
Nitric acid
7697-37-2
NIOSH 7903
IC
Treated silica gel tube (water-washed) (SKC
226-10-03)
0.2 - 0.3 L/min
3-100 L
Inorganic Acids
Phophoric acid
7664-38-2
NIOSH 7903
IC
Treated silica gel tube (water-washed) (SKC
226-10-03)
0.2 - 0.3 L/min
3-100 L
Inorganic Acids
Sulfuric acid
7664-93-9
NIOSH 7903
IC
Treated silica gel tube (water-washed) (SKC
226-10-03)
0.2 - 0.3 L/min
3-100 L
1.0 L/min
15 - 240 L
Isocyanates
Methylene bisphenyl isocyanate
101-68-8
OSHA 42/47
HPLC
Treated glass fiber
filter (GFF)
(SKC 225-9002)
Isocyanates
Hexamethylene diisocyanate
822-06-0
OSHA 42/47
HPLC
Treated glass fiber
filter (GFF)
(SKC 225-9002)
1.0 L/min
15 - 240 L
Isocyanates
Toluene diisocyanate, 2,4-
584-84-9
OSHA 42/47
HPLC
Treated glass fiber
filter (GFF)
(SKC 225-9002)
1.0 L/min
15 - 240 L
Isocyanates
Toluene diisocyanate, 2,6-
91-08-7
OSHA 42/47
HPLC
Treated glass fiber
filter (GFF)
(SKC 225-9002)
1.0 L/min
15 - 240 L
Metals
Aluminum
7429-90-5
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
2.0 L/min
960 L
Metals
Antimony
7440-36-0
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
Metals
Arsenic
7440-38-2
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
Metals
Barium
7440-39-3
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
Metals
Beryllium
7440-41-7
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
Metals
Cadmium
7440-43-9
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
Metals
Calcium
7440-70-2
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
2.0 L/min
960 L
Metals
Chromium
7440-47-3
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
Metals
Cobalt
7440-48-4
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
Metals
Copper
7440-50-8
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
Metals
Iron
7439-89-6
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
Metals
Lead
7439-92-1
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
2.0 L/min
960 L
Metals
Magnesium
7439-95-4
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
Metals
Manganese
7439-96-5
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
Metals
Nickel
7440-02-0
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
Store samples cold and protect samples from light.
Sample open-faced.
Flow rate 1.0 Lpm; volume 15 liters (maximum is 240 liters).
Recommendation: Immediately after sampling, transfer filter to amber vial containing DMSO/ACN (helps to stabilize
MDI).
Store samples cold and protect samples from light.
Sample open-faced.
Flow rate 1.0 Lpm; volume 15 liters (maximum is 240 liters).
Recommendation: Immediately after sampling, transfer filter to amber vial containing DMSO/ACN (helps to stabilize
MDI).
Store samples cold and protect samples from light.
Sample open-faced.
Flow rate 1.0 Lpm; volume 15 liters (maximum is 240 liters).
Recommendation: Immediately after sampling, transfer filter to amber vial containing DMSO/ACN (helps to stabilize
MDI).
Store samples cold and protect samples from light.
Sample open-faced.
Flow rate 1.0 Lpm; volume 15 liters (maximum is 240 liters).
Recommendation: Immediately after sampling, transfer filter to amber vial containing DMSO/ACN (helps to stabilize
MDI).
Metals
Potassium
7440-09-7
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
Metals
Selenium
7782-86-6
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
2.0 L/min
960 L
Metals
Sodium
7440-23-5
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
Metals
Strontium
7440-24-6
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
Metals
Thallium
7440-28-0
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
Metals
Vanadium
7440-62-2
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
Metals
Zinc
7440-66-6
NIOSH 7303
ICP/MS
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2.0 L/min
960 L
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Metals (Welding Fumes)
Aluminum
7429-90-5
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
Metals (Welding Fumes)
Antimony
7440-36-0
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Metals (Welding Fumes)
Beryllium
7440-41-7
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Metals (Welding Fumes)
Cadmium
7440-43-9
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Metals (Welding Fumes)
Chromium
7440-47-3
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Metals (Welding Fumes)
Cobalt
7440-48-4
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Metals (Welding Fumes)
Copper
7440-50-8
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Metals (Welding Fumes)
Iron
7439-89-6
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Metals (Welding Fumes)
Lead
7439-92-1
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Metals (Welding Fumes)
Manganese
7439-96-5
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Metals (Welding Fumes)
Molybdenum
7439-98-7
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Metals (Welding Fumes)
Nickel
7440-02-0
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Metals (Welding Fumes)
Vanadium
7440-62-2
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Metals (Welding Fumes)
Zinc
7440-66-6
NIOSH 7303
ICP
MCE filter
(or, use preweighed PVC if
also requesting total dust)
2 L/min
960 L
If total welding fume (as particulate) will also be tested on the same filter, we recommend collection on a preweighed PVC filter
(vs. MCE).
Pesticides
Aldrin
309-00-2
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
BHC, alpha-
319-84-6
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
BHC, beta-
319-85-7
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
BHC, delta-
319-86-8
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
BCH, gamma
58-89-9
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Chlordane, alpha
5103-71-9
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Chlordane, gamma
5103-74-2
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
DDD, 4',4'-
72-54-8
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
DDE, 4',4'-
72-55-9
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
DDT, 4',4'-
50-29-3
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Dieldrin
60-57-1
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Endosulfan I
959-98-8
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Endosulfan II
33213-65-9
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Endosulfan sulfate
1031-07-8
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Endrin
72-20-8
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Endrin aldehyde
7421-93-4
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Endrin ketone
53494-70-5
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Heptachlor
76-44-8
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Heptachlor epoxide
1024-57-3
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Methoxychlor
72-43-5
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Toxaphene
8001-35-2
EPA TO-10
GC/ECD
PUF tube
1.0 - 5.0 L/min
240 - 7200 L
Sampling media must be ordered directly from SKC.
Store samples cold and wrap in foil for shipment. Lab must extract sample within 7 days of sampling.
Pesticides
Azinphos methyl
Chlorpyrifos (Dursban)
Diazinon
Dicrotophos
Disulfoton
Ethion
Ethoprop
Fenamiphos
Fonofos
Malathion
Methamidophos
Mevinphos
Methyl parathion
Monocrotophos
Parathion
Phorate
Ronnel
Sulprofos
Terbufos
86-50-0
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Chlorpyrofos (Dursban)
2921-88-2
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Diazinon
333-41-5
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Dicrotophos
141-66-2
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Disulfoton
298-04-4
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Ethion
563-12-2
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Ethoprop
13194-48-4
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Fenamiphos
2224-92-6
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Fonofos
944-22-9
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Malathion
121-75-5
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Methamidophos
10265-92-6
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Mevinphos
26718-65-0
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Methyl parathion
56-38-2
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Monocrotophos
6923-22-4
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Parathion
56-38-2
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Phorate
298-02-2
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Ronnel
299-84-3
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Sulprofos
35400-43-2
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
Pesticides
Terbufos
13071-79-9
NIOSH 5600
GC/FPD
OVS-2 tube
(SKC 226-30-16)
0.2 - 1.0 L/min
12 - 60 L
PAH's (polynuclear aromatic
hydrocarbons)
Anthracene
Benzo(a)pyrene
Chrysene
Phenanthrene
Pyrene
120-12-7
OHSA 58
HPLC
Glass Fiber Filter
(GFF-37 mm)
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
PAH's (polynuclear aromatic
hydrocarbons)
Benzo (a) pyrene
50-32-8
OHSA 58
HPLC
Glass Fiber Filter
(GFF-37 mm)
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
PAH's (polynuclear aromatic
hydrocarbons)
Chrysene
218-01-9
OHSA 58
HPLC
Glass Fiber Filter
(GFF-37 mm)
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
PAH's (polynuclear aromatic
hydrocarbons)
Phenanthrene
85-01-8
OHSA 58
HPLC
Glass Fiber Filter
(GFF-37 mm)
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
PAH's (polynuclear aromatic
hydrocarbons)
Pyrene
129-00-0
OHSA 58
HPLC
Glass Fiber Filter
(GFF-37 mm)
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
PAH's (polynuclear aromatic
hydrocarbons)
Acenaphthene
Acenaphthylene
Anthracene
Benzo(a)anthracene
Benzo(a)pyrene
Benzo(b)fluoranthene
Benzo(e)pyrene
Benzo(ghi)perylene
Benzo(k)fluoranthene
Chrysene
Dibenzo(a,h)anthracene
Fluoranthene
Fluorene
Indeno(1,2,3cd)pyrene
Naphthalene
Phenanthrene
Pyren
83-32-9
NIOSH 5506
HPLC
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
PAH's (polynuclear aromatic
hydrocarbons)
Acenphthylene
208-96-8
NIOSH 5506
HPLC
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
PAH's (polynuclear aromatic
hydrocarbons)
Anthracene
120-12-7
NIOSH 5506
HPLC
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
PAH's (polynuclear aromatic
hydrocarbons)
Benzo(a)anthracene
56-55-3
NIOSH 5506
HPLC
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
PAH's (polynuclear aromatic
hydrocarbons)
Benzo(a)pyrene
50-32-8
NIOSH 5506
HPLC
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
PAH's (polynuclear aromatic
hydrocarbons)
Benzo(b)fluoranthene
205-99-2
NIOSH 5506
HPLC
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PAH's (polynuclear aromatic
hydrocarbons)
Benzo(e)pyrene
192-97-2
NIOSH 5506
HPLC
PAH's (polynuclear aromatic
hydrocarbons)
Benzo(ghi)perylene
191-24-2
NIOSH 5506
HPLC
PAH's (polynuclear aromatic
hydrocarbons)
Benzo(k)fluoranthene
207-08-9
NIOSH 5506
HPLC
PAH's (polynuclear aromatic
hydrocarbons)
Chrysene
218-01-9
NIOSH 5506
HPLC
PAH's (polynuclear aromatic
hydrocarbons)
Dibenzo(a,h)anthracene
53-70-3
NIOSH 5506
HPLC
PAH's (polynuclear aromatic
hydrocarbons)
Fluoranthene
206-44-0
NIOSH 5506
HPLC
PAH's (polynuclear aromatic
hydrocarbons)
Fluorene
86-73-7
NIOSH 5506
HPLC
PAH's (polynuclear aromatic
hydrocarbons)
Indeno(1,2,3)pyrene
193-39-5
NIOSH 5506
HPLC
PAH's (polynuclear aromatic
hydrocarbons)
Naphthalene
91-20-3
NIOSH 5506
HPLC
PAH's (polynuclear aromatic
hydrocarbons)
Phenanthrene
85-01-8
NIOSH 5506
HPLC
PAH's (polynuclear aromatic
hydrocarbons)
Pyrene
129-00-0
NIOSH 5506
HPLC
Volatiles
Acetone
67-64-1
OSHA-7
GC/MS
Volatiles
Benzene
71-43-2
OSHA-7
Volatiles
Butyl acetate, n-
123-86-4
Volatiles
Chlorobenzene
Volatiles
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
PTFE -2 µm
"XAD-2 Tube
(SKC 226-30-04 or ORBO 43)"
"PTFE - 2 µm / XAD-2 Tube
sampling train"
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
2.0 L/min
200-1000 L
Store samples cold. Protect from light. After sampling, remove filter from cassette, fold and use to wipe inside of cassette, then
tranfer the filter to a glass vial with a teflon-lined cap
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
108-90-7
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Chloroform
67-66-3
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Ethanol
64-17-5
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
2-Ethoxy ethyl acetate
111-15-9
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Ethyl acetate
141-78-6
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Ethylbenzene
100-41-4
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Hexane, n-
110-54-3
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Isobutanol
78-83-1
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Isopropanol
67-63-0
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Methylene chloride
75-09-2
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Methyl ethyl ketone
78-93-3
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Methyl isobutyl ketone
108-10-1
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Styrene
100-42-5
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Tetrahydrofuran
109-99-9
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Tetrachloroethylene
127-18-4
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Toluene
108-88-3
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Trichloroethane, 1,1,1-
71-55-6
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Trichloroethylene
79-01-6
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Volatiles
Total xylenes (o,m,p)
1330-20-7
OSHA-7
GC/MS
Charcoal Tube
(SKC 226-01)
< 0.2 L/min
< 10 L
Category
Test – Method
Information
Comments
Fiber Counts - Air
PCM (Phase-Contrast Microscopy)
Fiber Counts - Air
PCM (Phase-Contrast Microscopy)
NIOSH 7400 B Rules
Often used for man-made fibers
Fiber Counts - Air
TEM (Transmission Electron Microscopy)
NIOSH 7402
Normally used for personal exposure or PCM
confirmation
Fiber Counts - Air
TEM (Transmission Electron Microscopy)
AHERA
Normally used for building clearance;
Additional Grid Openings for Sensitivity
Asbestos bulk solids
PLM (Polarized Light Microscopy); Method EPA 600/R-93/116
Building material, construction material, etc.
Your basic asbestos test for identifying and
quantifying asbestos fibers
Asbestos bulk solids
PLM (Polarized Light Microscopy); Method EPA 600/R-93/116
Point-counting by PLM (400 points)
(Routine PLM analysis, above)
Asbestos bulk solids
PLM (Polarized Light Microscopy); Method EPA 600/R-93/116
Point-counting by PLM (1000 points)
(Routine PLM analysis, above)
Asbestos bulk solids
PLM (Polarized Light Microscopy); Method EPA 600/R-93/116
New York Method – Stratified Point Count by NY
198.1
Asbestos bulk solids
PLM (Polarized Light Microscopy); Method EPA 600/R-93/116
New York Method – PLM Non-Organically Bound
(NOB) Materials by
method NY 198.1
Asbestos bulk solids
PLM (Polarized Light Microscopy); Method EPA 600/R-93/116
Semi-quantitative
Asbestos is identified and reported as one of
three results,
either non-detect, < 1%, or > 1%
Asbestos bulk solids
PLM (Polarized Light Microscopy); Method EPA 600/R-93/116
Full quantitative
Asbestos is identified and quantified to the
nearest 0.1%
NIOSH 7400 A Rules
Often used for man-made fibers
Asbestos bulk solids
PLM (Polarized Light Microscopy); Method EPA 600/R-93/116
New York Method – Non-Organically Bound (NOB)
Materials by Method NY 198.4
Asbestos - Water
TEM
Drinking water, method EPA 100.2.
Holding time is 48 hours, so call laboratory
before collecting
samples
Materials
Characterization –
Bulk Solids
PLM/MC – Polarized Light Microscopy / Materials Characterization
NA
Uses optical properties of light to identify larger
particles
NA
Morphology, selected area electron diffraction
(SAED) and
energy dispersive spectroscopy (EDS). Uses
elemental
chemistry and crystallinity to identify very small
particles—
less than 10 µm
Materials
Characterization –
Bulk Solids
TEM/MC – Transmission Electron Microscopy / Materials Characterization
Analysis
Matrix
Recommended
Sample Size*
Reporting Units
Total Spore Count
Air
(Using Air-O-Cell,
Allergenco, Burkard, or other
samplers)
30-150 L
No. of fungal structures/m3
Direct Spore Count
Bulk
(Building materials, ceiling
tile, drywall)
20 g or 1-4 in2
Qualitative fungal ID
Direct Spore Count
Dust
0.5 g
Qualitative fungal ID
Direct Spore Count
Liquid
50-100 mL
Qualitative fungal ID
Direct Spore Count
Swab
1-4 in2
Qualitative fungal ID
Direct Spore Count
Tape Lift
1.5 in. tape length
Qualitative fungal ID
Special Handling
Instructions
Ship samples in slide cases
or ziplock baggies, and place
in cooler or box (cold pack
not necessary) with protective
wrapping. Samples should
be received within 2 days of
sampling
Ship samples in slide cases
or ziplock baggies, and place
in cooler or box (cold pack
not necessary) with protective
wrapping. Samples should
be received within 2 days of
sampling.
Ship samples in slide cases
or ziplock baggies, and place
in cooler or box (cold pack
not necessary) with protective
wrapping. Samples should
be received within 2 days of
sampling.
Ship samples in slide cases
or ziplock baggies, and place
in cooler or box (cold pack
not necessary) with protective
wrapping. Samples should
be received within 2 days of
sampling.
Ship samples in slide cases
or ziplock baggies, and place
in cooler or box (cold pack
not necessary) with protective
wrapping. Samples should
be received within 2 days of
sampling.
Ship samples in slide cases
or ziplock baggies, and place
in cooler or box (cold pack
not necessary) with protective
wrapping. Samples should
be received within 2 days of
sampling.
Filters
Filters
Description
Typical Analytes
Filter
GFF-37mm
Glass Fiber Filter (37 mm)
Triethanolamine
Filter
GFF-13mm
Glass Fiber Filter (13 mm) in Swinnex
cassette
PCBs (part of sampling train)
Filter
GFF-T3
GFF, treated with sulfuric acid (SKC 2259004)
Hydrazine; 4,4-MDA
Filter
GFF-T6
GFF, treated with mercuric acetate for
mercaptans (store cold) (SKC 225-9007)
Mercaptans (ethyl, methyl, and n-butyl)
Filter
GFF-T10
GFF treated with DNPH for
glutaraldehyde. Two filters contained in
one cassette. Store cold (SKC 225-9003)
Glutaraldehyde
Filter
GFF-T11
GFF treated with 1-(2-pyridyl) piperazine.
Store cold. (SKC 225-9002)
Isocyanates (monomers only)
Filter
GFF / polyester-T18
GFF treated with mercuric chloride. Store
cold
Phosphine
Filter
GFF-T21
GFF treated with nitrite (SKC 226-9014)
(Special-order item due to 28-day shelf
life. Store cold.)
Ozone
Filter
MCE
Mixed cellulose ester filter (37 mm)
Metals; hydroquinone; particulate
Fluoride
Filter
MCE-25mm
Mixed cellulose ester filter (25 mm), with
black cowl
Fibers; asbestos
Filter
MCE / Cellulose pad-T9
MCE and backup pad (cellulose) treated
with sodium carbonate (SKC 225-9001)
Fluorides (gaseous and particulate)
Filter
MCE / Treated pad-T20
MCE and backup pad (cellulose) treated
with sodium carbonate and support (SKC
225-9005)
SOx (Sulfur dioxide; sulfate; sulfite)
Filter
PTFE (0.45 µm)
Teflon Filter (0.45 µm pore size, 25 mm)
Hydrogen sulfide (prefilter)
Filter
PTFE-1 µm
Teflon Filter (1 µm pore size; 37 mm)
Alkaline dust
Filter
PTFE-2 µm
Teflon Filter (2 µm pore size; 37 mm)
Order precleaned for MWF/oil mist.
PNAs; metal-working fluids; oil mist
Filter
PVC
Polyvinyl Chloride (5-µm pore size)
Crystalline silica; hexavalent chromium
Filter
PVC–PW
Polyvinyl Chloride (5-µm pore size) –
preweighed
Particulate (also, particulate on same filter
as
metals or silica)
Filter
Quartz (precleaned)
Quartz-baked - 37 mm. Also, see SKC
DPM if sampling in a mine.
Diesel particulate; elemental carbon
Filter
Silver filter-cleaned
Silver membrane (25 mm)
Chlorine
Filter
SKC DPM
SKC’s special filter for diesel particulate
(used by MSHA and for mine monitoring)
Diesel particulate; elemental carbon
Sorbent Tubes
Anasorb 708
Anasorb 708 (SKC 226-30-08)
Acrylic or methacrylic acid
(need 2 tubes per sample)
Sorbent Tubes
Anasorb 747
Carbon bead (SKC 226-81A or ORBO
90)
Methyl ethyl ketone
Sorbent Tubes
Anasorb 747-T8
Carbon bead, treated with hydrobromic
acid. Store cold. (SKC 226-178)
Ethylene oxide (ETO)
Sorbent Tubes
Anasorb CMS
Anasorb CMS, carbon-type sorbent (SKC
226-121)
Methylene chloride
Sorbent Tubes
Carbon bead-T
Anasorb 747 treated with potassium
hydroxide (SKC 226-80)
Iodine; sulfur dioxide
Sorbent Tubes
Carbotrap
3-stage tube, made by Supelco. Requires
cleaning at the lab, and should be used
within 30 days of cleaning.
Volatiles scan by GC/MS
Sorbent Tubes
Chrm 106
Chromasorb 106 (SKC 226-110 or 226111A) (Lab needs time to order; not a
routine stock item)
Nitromethane
Sorbent Tubes
CT
Charcoal tube, 150-mg (SKC 226-01)
Organic solvents
Sorbent Tubes
CT (600 mg)
Charcoal tube, 600-mg (SKC 226-09)
Organic solvents (has greater capacity,
but higher LOD, than 150-mg tube)
Sorbent Tubes
CT (2) / (226-37)
Anasorb CSC (SKC 226-37)
1,3-Butadiene
Sorbent Tubes
CT-T4
CT treated with 4-t-buyl catechol (SKC
226-73 or ORBO 351)
1,3-Butadiene; 2-ethylhexyl acrylate
Sorbent Tubes
Drierite
Drying tube (SKC 226-44)
Carbon disulfide
Sorbent Tubes
Florisil
Florisil (SKC 226-39 or ORBO 60)
Polychlorinated biphenyls (PCBs)
Sorbent Tubes
Hopcalite
Anasorb C300, SKC’s equivalent to
Hopcalite/hydrar (SKC 226-17-1A)
Mercury
Sorbent Tubes
Mol. Sieve-T15
Molecular sieve (SKC 226-40-02). Store
cold.
Nitrogen dioxide (NO2)
Sorbent Tubes
Mol. Sieve Set-T15
Molecular sieve set (SKC 226-40). Set of
3 tubes. Store cold. See SKC instructions
for sampling train.
Nitrogen oxides (NO/NO2)
Sorbent Tubes
ORBO 34
Charcoal tube from Supelco
Hydrogen sulfide
Sorbent Tubes
ORBO 90 or 92
Supelco Carboxen 564 (equivalent to
SKC 226-81A)
Methylene chloride; vinyl acetate
Sorbent Tubes
ORBO 91
Supelco Carbosieve S-III (equivalent to
former SKC 226-121)
Butane; propane
Sorbent Tubes
OVS-2
XAD-2 with 13mm glass fiber filter, in one
tube (SKC 226-30-16)
Pesticides (organophosphorus)
Sorbent Tubes
OVS-7
XAD-7 with 13mm glass fiber filter, in one
tube (SKC 226-57)
Glycols
Sorbent Tubes
OVS-Tenax
Tenax with 13mm glass fiber filter (SKC
226-56)
Phthalates
Sorbent Tubes
Porapak P
Porapak P sorbent (SKC 226-114)
Dimethyl sulfate
Sorbent Tubes
Porapak Q
Porapak Q sorbent (SKC 226-115)
Furfuryl alcohol
Sorbent Tubes
PUF
Polyurethane foam (client needs to order
directly from SKC or Supelco)
Chlorinated pesticides; PCBs
Sorbent Tubes
SG
Silica gel tube-225-mg (SKC 226-10) or
775 mg (SKC 226-15)
Aliphatic amines; Methanol
Sorbent Tubes
SG-T2
SG treated with DNPH (SKC 226-119)
(store cold)
Aldehydes (done by HPLC)
Sorbent Tubes
SG-T3
SG treated with sulfuric acid (SKC 22610-06)
Ammonia
Sorbent Tubes
SG-T12
SG, water-washed (SKC 226-10-03 or
ORBO 53)
Acid mist
Sorbent Tubes
SG-T19
SG treated with sodium hydroxide. Store
cold. (SKC 226-55)
Sorbent Tubes
SG – washed & baked
SG, cleaned and dried. (SKC 226-183:
set of 2 tubes)
Sorbent Tubes
Soda Lime tube
Soda lime (SKC 226-28)
Hydrogen cyanide (HCN)
Sorbent Tubes
Tenax (30 mg)
Tenax (SKC 226-35-01). Not a routine
stock item; need time to order.
Biphenyl
Sorbent Tubes
Tenax (150 mg)
Tenax (SKC 226-35-03)
Phosphorus (vapor)
Sorbent Tubes
XAD-2
XAD-2 sorbent-150 mg (SKC 226-30-04
or ORBO 43)
Polynuclear Aromatic Hydrocarbons
(PAHs); nicotine
Sorbent Tubes
XAD2-T1
XAD-2 treated with 2-hydroxymethyl
piperidine. Store cold. (SKC 226-117 or
ORBO 24 for TWA; SKC 226-54 for
STEL)
Acrolein; acetaldehyde; formaldehyde
(STEL tube for formaldehyde, only)
Sorbent Tubes
XAD2-T5
XAD-2 treated with 1naphthylisothiocyanate (SKC 226-30-18)
Amines done by HPLC
Sorbent Tubes
XAD2-T14
XAD-2 treated with p-anisidine (SKC 22630-07) (store cold)
Maleic anhydride
Sorbent Tubes
XAD-4
XAD-4 sorbent (SKC 226-93)
Nicotine
Hydrazoic acid
Sorbent Tubes
XAD-7
XAD-7 sorbent (SKC 226-95)
Cresols; phenol
Sorbent Tubes
XAD7-T7
XAD-7 treated with phosphoric acid (SKC
226-98)
Triethylamine; trimethylamine; 2ethylcyanoacrylate
Sorbent Tubes
XAD7-T16 (w/GFF disc)
XAD-7 that is methanol-washed (SKC
226-97) w/GFF disc. Set of 3 tubes.
Pentachlorophenol
Impinger Solu.on
0.1N H2SO4
Sulfuric acid
Ammonia
Impinger Solu.on
0.1N KOH
Potassium hydroxide
Cyanide
Impinger Solu.on
0.1N NaOH
Sodium hydroxide (0.1N)
Cyanide
Impinger Solu.on
0.1% Sulfamic acid
Sulfamic acid
Chlorine
Impinger Solu.on
80% IPA / 3%H2O2
Ispopropyl alcohol and hydrogen
peroxide
Sulfur dioxide or sulfuric acid (stack
sampling)
Impinger Solu.on
NaHSO3
Sodium bisulfite, 1%
Formaldehyde
Impinger Solu.on
Nitroreagent
N-(4-nitrobenzyl)-propylamine in toluene
Isocyanates (especially polyisocyanates)
using the Bayer method 1.4.4
Impinger Solu.on
Pip/Tol Soln.
1-(2-methoxyphenyl) piperazine in
toluene
Isocyanates (monomers
andpolyisocyanates)
Impinger Solu.on
TiOSO4
Titanium oxysulfate
Hydrogen peroxide
Passive Badges
3M 3500 OVM
Single pad of charcoal
Organic solvents
Passive Badges
3M 3520
Two pads of charcoal
Organic solvents, where extra capacity is
needed or for compounds prone to
breakthrough; especially acetone
acetonitrile, ethyl ether, freons, and IPA
Passive Badges
3M 3551
Badge for ethylene oxide (ETO)
Ethylene oxide
Passive Badges
3M 3721
Badge for formaldehyde
Formaldehyde by general chemistry
Passive Badges
SKC 575-001
Charcoal, 350 mg
Organic solvents
Passive Badges
SKC 575-002
Anasorb 747, 500 mg
Organic solvents
Passive Badges
SKC Mercury
Capsule holder (reusable for mercury) –
Must order from SKC
Mercury
Passive Badges
SKC Mercury
Sorbent capsule (one-time use)
Mercury
Passive Badges
SKC UMEx 100
Tape, impregnated with DNPH. Store
cold. Analyzed by HPLC.
Formaldehyde by HPLC
Passive Badges
Assay Tech OVM
Charcoal badge #566 (replaces #541)
Organic solvents
Passive Badges
Assay Tech (HCOH)
DNPH-treated badge #571. Store cold.
Analyzed by HPLC.
Aldehydes by HPLC
Abbreviation
Full Name
GC/ECD
Gas chromatography/Electron Capture Detector
GC/FID
Gas chromatography/Flame Ionization Detector
GC/FPD
Gas chromatography/Flame Photometric Detector
GC/MS
Gas chromatography/Mass Spectrometry
GC/NPD
Gas chromatography/Nitrogen-Phosphorus Detector
Gravimetric
Weight
HPLC
High Performance Liquid Chromatography
IC
Ion Chromatography
ICP
Inductively Coupled Argon Plasma Spectroscopy (also called ICAP)
ICP/MS
ICP with Mass Spectrometry
IR
Infra-Red
PCM
Phase Contrast Microscopy
PLM
Polarized Light Microscopy
SEM
Scanning Electron Microscopy
TEM
Transmission Electron Microscopy
Thermal-optical
Thermal-optical detector
Wet Chem
Includes colorimetric, titrimetric, ion-specific electrode, and visible spectrometry analyses
XRD
X-Ray Diffraction
CFU
Colony-forming units
cm
Centimeter
COC
Chain-of-Custody form (also called laboratory request form)
FGB
Fritted Glass Bubbler
f/mm2
Fibers per square millimeter
g
Gram
hrs
Hours
in
Inch
L
Liter
LOD
Limit of detection (also ―reporting limit")
Lpm
Liters per minute
M
Molarity
m
Meter
m3
Cubic meter
mg
Milligram
mL
Milliliter
N
Normality
N/A
Not applicable
ng
Nanogram
No.
Number
Imp
Impinger
mm
Millimeter
pc.
Piece
ppm
Parts-per-million
prep
Preparation
RL
Reporting limit
STEL
Short-term exposure limit
T
Treated media (used for sampling media descriptions)
TAT
Turnaround time
TWA
Time-weighted average
µg
Microgram
µm
Micron
w/
With
wks
Weeks