Meulenbroek Machinebouw B.V.
Meulenbroek Afvalpersen BV.
De Giem 7
7547 SW Enschede
Nederland
Press container model LPC-L
Telefoon : +31 (0)53 4305 499
Fax
: +31 (0)53 4314 933
[email protected]
www.meulenbroek.nl
The LPC-L press container has many advantages over other press containers, both because of its shape, and of
its construction.

Press bottom 30 cm above container bottom.
 
Water in the waste can’t flow back into the press
part.
Optimal compression.

Press bottom slopes to the container.
 
Water that comes behind the press part during the
forward press cycle, can flow back to the container.

Central locking of the backdoor.
 
Very easy handling of the door. Watertight backdoor.

Rounded edges on the container, and
conical container.
 
Easy emptying of the container.

Container made in 5 mm steel.
 
Very strong, long-life container.

Hydraulic unit in oil tight drawer under the
press part.
 
Waste and water can never come to the electrical
and hydraulic components which gives a high
reliability and a very long-life.

High quality electronics with intelligent
software.
 
Up to 30% higher density at lower power
consumption.
Remote control possible.
Member -METAALUNIEThe Metaalunie conditions apply to all of our quotations and deliveries.
Meulenbroek Machinebouw B.V.
Meulenbroek Afvalpersen BV.
De Giem 7
7547 SW Enschede
Nederland
Telefoon : +31 (0)53 4305 499
Fax
: +31 (0)53 4314 933
[email protected]
www.meulenbroek.nl
Technical data Press containers LPC-L
Model
(1) Height H =
17 L
20 L
23 L
Nett contents
m3
17
20
23
Length L
mm
5885
6460
7070
Width B
mm
2530
2530
2530
Height H (1)
mm
2570
2570
2570
Length filling area
mm
2160
2160
2160
Width filling area
mm
1800
1800
1800
Introw height
mm
1290
1290
1290
Length before press
mm
1400
1400
1400
Width press block
mm
1800
1800
1800
Height press block
mm
550
550
550
Cycle time
sec
57
57
57
Press power
n/cm2
32
32
32
Motor power
kw
7,5
7,5
7,5
Weight ca. (2)
kg
4490
4900
5100
Max. total weight
kg
16500
17000
17000
without hinges:
without wheels:
(2) Standard machine, without tilting device
with hinges:
with wheels:
+ 40 mm
+ 20 mm
Power connection: 400 Volt, 32 Amp plug, fuse 25 A slow.
Member -METAALUNIEThe Metaalunie conditions apply to all of our quotations and deliveries.