Mete-R-Matic® UTM-60
Turn your turf truck into a quality topdresser: With a few simple mounting brackets and connections, the MeteR-Matic UTM-60 instantly transforms your four-wheel Cushman® Turf-Truckster®, John Deere ProGator® or
earlier model Toro® Workmans® into a topdresser. Take advantage of the same high maneuverability and easy
handling around tight areas and greens that your truck provides, combined with the best applicator system in the
industry.
The Mete-R-Matic UTM-60 spreads wider than turf truck tires, eliminating driving over topdressing on the next
pass. With Turfco's patented Chevron® belt, you can easily spread wet or dry materials.
The Meter-R-Matic® UTM-60 is ideal for light, frequent topdressing, heavy topdressing after core
aeration and spreading grass clippings, crumb rubber, gypsum and calcine clay.
Ideal for tighter areas.
The Meter-R-Matic UTM-60 spreads wider than turf truck tires, eliminating driving over topdressing on
the next pass.
Model: Mete-R-Matic UTM-60; product number 85450
Mounting Kits:
Product number 86135 for Cushman Turf-Truckster
Product number 86136 for John Deere ProGator
Product number 86132 for Toro Workmans
Hopper Capacity: 19 cubic feet (0.54 cubic meter), galvanized panels
Spreading Width: 60" (1.5 meters)
Speed: Topdress up to 8 MPH (12.8 km/h)
Hopper Size: Top: 35" x 71 7/16", Bottom: 16 3/4" x 60"
Application: From very fine to very heavy, based on speed of the truck. One hopper load covers 1,700 square feet at
1/8" thick application.
Conveyor Belt: Wide rubber composition with patented Chevron belt, 60" (1.5 meters)
Drive: Driven by the hydraulic system of the truck.
Metering Gate: Taintor gate design is easily adjusted and provides a uniform opening up to 2 1/4" (57 mm).
Hydraulics: All trucks require remote hydraulics.
All trucks listed come with remote hydraulics as a standard feature or as an option.
Empty Weight: 660 lbs. (272 kg)