L24
APPLICATION
Available in a variety of standard sizes and outputs to fit almost any architectural
application. Fixtures may be plugged together for long, no shadow, seamless runs
up to 48 feet^ or used as individual luminares with easy-snap end caps. The unique
plug and play system allows for quick, easy installation with consistent pitch spacing.
Great for millwork, niches, suspended lines, coves or slots.
Populated with single color LEDs mounted 11MM on center to an aluminum substrate
for superior thermal dissipation. The L24 features positive engagement end connectors.
Optional full wiring or mounting channel available. Robust leader cables for easy
energizing and remote wiring. The L24 offers complete system flexibility; 6 standard
sizes readily available, with custom lengths and illuminated corners built to order.
The L24 is a low voltage, remote driver system bright enough for general illumination
or available with lower output for a warm glow. Optional lensing, optics and beam
angles are available, please consult factory.
LIGHT OUTPUT & POWER CONSUMPTION
VERY HIGH OUTPUT
shown without endcap
HIGH OUTPUT
SIZE Lumens* Watts Lumens
QUICK VIEW
6”
1.422”
1.219”
.925”
1.075”
shown with the QW1 lens
and optic layer
VO 600 lm
5.5W
MEDIUM OUTPUT
Watts Lumens
STANDARD OUTPUT
Watts Lumens
Watts
HO 450 lm
5.4W
MO 300 lm
3.6W
SO 200 lm
2.6W
4.8W
12”
VO 1200 lm 10.9W
HO 900 lm
10.8W
MO 600 lm
6.72W SO 400 lm
18”
VO 1800 lm 16.4W
HO 1350 lm
16.2W
MO 900 lm
10.3W SO 600 lm
7.4W
24”
VO 2400 lm 21.8W
HO 1800 lm
21.6W
MO 1200 lm 13.44W SO 800 lm
9.6W
48”
VO 4800 lm 43.6W
HO 3600 lm
43.2W
MO 2400 lm 26.88W SO 1600 lm 19.2W
72”
VO 7200 lm 65.4W
HO 5400 lm
64.8W
MO 3600 lm 40.32W SO 2400 lm 28.8W
VERIFY ALL WATTAGES, DIMENSIONS AND LENGTHS DUE TO THIS RAPIDLY CHANGING TECHNOLOGY
ELECTRICAL
Auto-ranging 120V to 277V mains input
48VDC Constant Voltage output
QUICK FACTS
DIMMING
28 diodes per foot, 11MM on-center
0-10V Dimming
Optional DMX control for dimming down to .2%
82+ CRI
Fully configurable for various sizes
FINISH
Anodized aluminum finish
Custom colors and finishes available, please consult factory
Available in 2700K, 3000K, 3500K, 4000K,
Red, Blue, Green
Up to 1200 lumens* per foot
ORDERING INFORMATION
Plug and play long continuous runs
Example:
QW1
MO - ____
27 - ___
48 - ____
L24 - ___
0-10V dimming available or DMX optional
L24 - __ - __ - __ - ___
Operating tempature -10F to 102F
50,000 HRL at L70 @ 50C
70,000HRL at L70 @ 25C
5 Year Limited Warranty
ETL Listed
Tuneable White see “T24”
RGB and RGBW see “C24”
OUTPUT
VO - Very High Output
HO - High Output
MO - Medium Output
SO - Standard Output
Accessory optons, wiring compartments, optics,
end caps and mounting; see L24 Options page
CCT
24 - 2400K**
27 - 2700K
30 - 3000K
35 - 3500K
40 - 4000K
55 - 5500K**
LENGTH
06 - 6”
12 - 12”
18 - 18”
24 - 24”
48 - 48”
72 - 72”
QW1 - Squared Opal Lens
LENSING QC1 - Squared Clear Lens
QS1 - Squared Semi-translucent Lens
QW2 - High Squared Opal Lens
QC2 - High Squared Clear Lens
QS2 - High Squared Semi-translucent Lens
RW1 - Round Opal Lens
RC1 - Round Clear Lens
RS1 - Round Semi-translucent Lens
FW1 - Flat Opal Lens
FC1 - Flat Clear Lens
FS1 - Flat Semi-translucent Lens
nanometer
*VO version, driver losses not included
** Available as special order Consult factory for custom CCT and lengths
voltage drop chart for exact maximum runs
072515 ^Consult
lighting
57-10 49th place
maspeth, ny 11378
p. 718.497.0394
f. 718.821.9316
L24
DIMENSIONS
0.955 in
DISCLAIMER:
F_1 FLAT LENS
LEFT (FACING FEMALE SIDE)
1.219 in
0.925 in
0.925 in
1.069 in
F_1 FLAT LENS
1.069 in
NOTE:
ALL ANGLED END CAPS AVAILABLE AS LEFTS AND RIGHTS
FIXTURE ANGLE IS DETERMINED BY DIRECTION
LOOKING AT FEMALE, FINISHED SIDE.
BLANK SIDE WILL BE LABELED LOOKING AT NON-FINISHED SIDE
BE SURE TO VERIFY ALL WATTAGES, DIMENSIONS AND LENGTHS DUE TO THE RAPIDLY CHANGING TECHNOLOGY
1.1 in
R_1 ROUNDED LENS
1.308 in
R_1 ROUNDED LENS
LEFT (FACING FEMALE SIDE)
1.219 in
1.35 in
0.925 in
Q_1 STANDARD SQUARE LENS
1.31 in
1.157 in
Q_1 STANDARD SQUARE LENS
LEFT (FACING FEMALE SIDE)
1.422 in
Q_2 HIGH SQUARE LENS
1.51 in
Q_2 HIGH SQUARE LENS
LEFT (FACING FEMALE SIDE)
0.925 in
nanometer
lighting
57-10 49th place
maspeth, ny 11378
p. 718.497.0394
f. 718.821.9316
L24
DIMENSIONS
SIDE VIEW
72”
48”
12”
6”
0.24
0.24
END CAP
SIDE VIEW
END CAP ATTACHMENT
0.48
0.15
0.24
0.18
MALE SIDE
END CAP
nanometer
DISCLAIMER:
BE SURE TO VERIFY ALL WATTAGES, DIMENSIONS AND LENGTHS DUE TO RAPIDLY CHANGING TECHNOLOGY
072515
lighting
57-10 49th place
maspeth, ny 11378
p. 718.497.0394
f. 718.821.9316