BLOCKS
Sandvik Mining and Construction has durable yet serviceable blocks for specific
applications and for particular tools.
SB-48
SBH-43
1.626 [41.3mm]
B3AH-1943-4500
Heavy-duty block to
hold Sandvik standard
series tools solidly in
position while providing
a free-rotating, selfsharpening action.
45
˚
0.786 [19.9 mm]
1.375 [34.9mm]
˚
45
1.626 [41.3mm]
base
50˚
1.850 [46.9mm]
1.000 [25.4mm]
B4BA-1948-5000
Block features locator pins
for easy alignment. The
“V”-shaped front reduces
wear by channeling material
away from the face. For use
with Sandvik standard
series tools. Use M8D-0003
base with SB-48 block.
SB-53
SB-43
B3AJ-1953-4500
B3AA-1943-4500
Standard block to hold
Sandvik standard series
tools solidly in position
while providing
a free-rotating, selfsharpening action.
0.786 [19.9 mm]
0.786 [19.9mm]
.785 [19.9mm]
1.750 [44.45mm]
45˚
2.09 [53.1mm]
HB-43
Block is .393 inches
(10 mm) taller than standard
for additional clearance
when needed. For use
with sleeved, band or
externally-retained tools.
HB-53
B3BH-2243-4500
B3BJ-2253-4500
0.885 [22.5mm]
0.885 [22.5 mm]
Heavy-duty block to
hold Sandvik’s standard
series tools solidly in
position while providing
a free-rotating, selfsharpening action.
45˚
0.885 [22.5 mm]
B4BA-2292-4500
B4BA-2292-4500
1.750 [44.5mm]
45˚
2.088 [53.0mm]
0.885 [22.5 mm]
45˚
High-rise block for use
on reclaimers.
5.75 [146.0mm]
3.625 [92.1mm]
Block is .393 inches (10
mm) taller than standard
for additional clearance
when needed. For use
with sleeved or externallyretained tools.
B4BJ-2246-4500
B4BJ-2246-4500
Block is 2 inches taller than
B4BA-2292-4500 and is
ideal for use on 34-inchdiameter drums on
reclaimers.
45˚
3.595 [91.3 mm]
4.000 [101.6 mm]
7