Chariot™ iGloss
20" Stand-on High-Speed Burnisher
» C h a r i o t i G l o s s 2 0 " B u r n i s h e r d e s i g n e d w i t h W i n d s o r ’s P a t e n t e d C h a r i o t
S t a n d - O n Te c h n o l o g y * f o r i n c r e a s e d p r o d u c t i v i t y a n d m a n e u v e r a b i l i t y.
» High-gloss shine produced by a 2600 rpm flexible pad drive including
A c t i v e D u s t C o n t r o l f o r i m p r o v e d a i r q u a l i t y.
» An ultra-tight tur ning radius enables Chariot to run around in five foot aisles
with room to spare. Greater access in tight areas, increasing your floor
cleaning coverage.
» Designed for even bur nishing results across the full pad width.
» Quick pad removal and simple battery exchange system for easy maintenance.
Scan the QR code to
watch a Chariot iGloss
product demonstration.
Performance Features
Technical Specifications
Chariot™ iGloss
Cleaning Rate:
23,760 ft2/hr.
Cleaning Path:
20" (510 mm)
Pad Driver:
20" (510 mm), flexible
Pad Motor:
4 hp (2983 w)
Pad Speed:
2600 rpm
Burnish Head Lift:
Actuator
Pad Pressure:
Off-set deck head and guide
wheel for burnishing up to walls
and fixtures.
0−45 lbs (0−20 kg)
Drive Motor:
0.75 hp (560 w)
Transport Speed:
3.5 mph (5.6 km/h)
Operating Speeds:
1.8 mph (2.9 km/h), 2.7 mph (4.3 km/h)
Tires:
10" (254 mm) solid gray, non-marking
Operating System:
Toggle switch for lowering burnisher deck and applying pad
pressure; switch for electrically fine tuning pad pressure
Electrical System:
36V, 3 x 12V, 205 or 225 A/H batteries, 234 A/H AGM batteries;
chargers and battery exchange system also available
Meters:
The burnishing shroud is
engineered to increase air flow
and lift dust from the floor.
Battery meter, hour meter and pad pressure gauge
Weight (w/o batteries):
585 lbs (265 kg)
Dimensions (LxWxH)
(machine body):
52" x 26.5" x 50.75"
(1320 mm x 673 mm x 1290 mm)
Specifications are subject to change without notice.
Fine pad pressure adjustment
Simplified controls for easy pad
pressure adjustment.
On-board storage compartment
Chariot’s control panel is
intuitively organized and easy
to operate while steering
Burnisher head lowered and
raised electronically
Soft ride suspension system
and forward leaning pad for
comfortable ride
Easy to step on and off
Dust is collected in a convenient,
disposable bag for greater ease
of use.
Dust control system eliminates
the need for dusting after
burnishing for additional labor
savings. Also provides a healthier
work environment.
Windsor Innovations Protect:
Indoor Air Quality
Water
People
Environment
Bold Innovation. Expert Results.
www.windsorind.com » 800-444-7654
1351 W. Stanford Ave. Englewood, CO 80110 USA
*U.S. Patent #7,733,435 and pending
U.S. and Foreign Applications.
© 2010. All rights reserved.
A-612